Active business function RE_GEN_CI_1

Hi experts,
I have installed SAP ERP 6.0 EHP4 Ready - Support Release 1, ABAP-based
I want to active business function RE_GEN_CI_1. But I cannot find RE_GEN_CI_1 in T-code SFW5, what wrong?
Please help me,
Thanks so much

Hi,
business function RE_GEN_CI_1 is part of software component EA-APPL. Have you installed EA-APPL already and activated EA-FIN? Please refer to SAP note 628208 for further information about prerequisites for activation of RE-FX.
Regards,
Franz

Similar Messages

  • Active business functions for IS-OIL Downstream

    Dear all,
    I have system NW701/ECC6, and upgrade EhP4.
    Now I want to active business functions for Downstream, in tcode swf5, I select Business functions set OIL&GAS,  I found a lot of business functions:
    BUSINESS_FUNCTION_BASIS_COM               Business Function Basis (COM)
    COMMODITY_MGMT_&_BULK_LOGISTIC       Commodity Management and Bulk Logistics
    COMM_MGMT&BULK_LOG_1                         Commodity Management and Bulk Transports
    ISR_RETAILSYSTEM                                       Other Enhancements for SAP Retail
    LOG_COMMODITY_TRANSPORT_MGMT_4   Commodity Management and Bulk Transports 2
    OIL_PRODUCTION                                           Upstream Production Management
    OIL_REVENUE_ACCOUNTING                         Upstream Revenue Accounting
    REMOTE_LOGISTICS_MANAGEMENT             Remote Logistics Management
    Can any one help me, what business functions do I need to active for Downstream ?
    Thanks all,
    Thanh.

    I create customer message ask SAP and these are downstream functions need to active:
    1. COMMODITY_MGMT_&_BULK_LOGISTIC (ECC 6.0 )
    2. BUSINESS_FUNCTION_BASIS_COM (EhP3)
    3. COMM_MGMT&BULK_LOG_1 (EhP3)
    4. LOG_COMMODITY_TRANSPORT_MGMT_4 (EhP4)
    Thanh.

  • Activating Business Functions:

    Dear All,
    Is it possible to activate Business Functions other than 000 client using T'code sbw5. If so..., what will be the causes after changes made.

    Hi,
    Yes, you can activate business function other than client 000. You have to make sure before activating business function because once activated, you cannot revert back changes.  Once a particular business function is activated, you will get all functions related to that business function.
    Thanks
    Sunny

  • EA-FIN activation business function SFW5

    in SPRO "activate business functions" or via SFW5 I try to activate EA-FIN but all options are in grey?!
    any suggestion?
    kr
    Arjan

    Hi all,
    The problem is not authorization issue. First of all you have to change system change option ( SE06 ) to modifiable after that you have to change client role ( SCC4)  to "customizing" , changes and transports for client-specific objects to "changes without automatic recording" and cross-client object changes to " changes to repository and cross-client customizing allowed" after all you can activate business function in SFW5.
    Regards,
    Erman Tüfekci

  • Activation Business Function MGV_LAMA Long material number

    Hi all.
    Does anybody know how to activate Business Function MGV_LAMA Long material number

    Dear
    Please try
    search OSS, there are hundreds of note
    Note 735529 - FAQ: DIMP/DI long material number and MPN
    831966 - Restrictions when Implementing the Long Material Number LMN
    [http://help.sap.com/erp2005_ehp_05/helpdata/en/20/cad200ccbe4aebafe3a6ace781d111/content.htm]
    With Regards
    Pushpalas
    Edited by: pushpalas on Oct 24, 2011 12:21 PM

  • Activating business function OPS_PS_CI_1

    Hello,
    I want to activate business function  OPS_PS_CI_1 using transaction SFW5in ECC 6.0 EHS-3.......if I want to deactivate can this be done if necessary.
    Thanks
    Moderator message: not directly related to ABAP development.
    Edited by: Thomas Zloch on Jan 19, 2011 4:57 PM

    Hi Saurabh,
    Business function OPS_PS_CI_1 is available as of ERP 6.0 EHP3.
    In case you have only ERP 6.0 without any enhancement packs, you may need to upgrade the ECC system to atleast EHP3.
    Post this upgrade you may use SWF5 to activate the required business function.
    Refer SAP help for more details
    Project System - Business Functions (SAP Enhancement Package 4 for SAP ERP 6.0) - SAP Library
    Hope this helps.
    Regards,
    Deepak Kori

  • Business function Activation

    Hi All,
    Wanted to understand what would be the impact activating business function "FIN_TRAVEL_2" for Travel management.
    Presently we are on FIN_TRAVEL_1 and EHP6. Wanted to have both Travel request and Travel expense report output view though PR05.
    As FIN_TRAVEL_2 has this extended feature, wanted to activate that before which thought of taking the experts view on the impact it can have on the existing system.
    As new fields get activated on TRIP, Travel Request and Travel expense report, will this have issue for the ones created before the activation.
    Regards...

    Wanted to know, if we activate "the FIN_TRAVEL_2" business function now, will that impact anything on the current Travel Requests or Expense sheet in any ways for processing. Also there is portal in place through which Travel requests are created too.
    The answer to that and to the activation of any business function in general is always YES. There's loads of coding in hundreds of subparts of the frame program that polls the Switchframework whether certain switches are switched on. I'm pretty sure there's nobody (including myself) who can line out every change in programmable process that takes place due to the activation.
    You say you are using a portal, I assume you are using the WebDynpro JAVA Services here? Or are you using transaction iviews with TA TRIP?
    What is stated in the help simply means that trips that are created in TA TRIP and WDA are not interchangeably processable. This does not mean that you cannot use the TA TRIP anymore once the business function is activated, but in case in your current business process you are furhter processing requests that are at the moment created in WebDynpro JAVA, that is not going to work likewise with WDA. (I hope this answers your question).
    Hence, just wanted to know if i activate this which cant be irreversable, will that have adverse impact on the existing TR or Travel expense reports or any other functionality.
    Careful. The activation of FIN_TRAVEL_2 IS irreversable, this means it is NOT reversable. The only unofficial way to deactivate such a business function is to roll back the Database.
    I have a question: What exactly are you using the Transaction TRIP for anyway? From EHP2 onwards it's practically obsolete, so you could shift your processes completely to the WDA services and TA PR05.
    Cheers, Lukas

  • Procedure Business Function Activation - How To

    Hi all,
    i have a customer that just upgraded it's systems to ehp4, our newest available release. He is now asking on a general best practice procedure how business functions should be activated in which client and what needs to be transported or not.
    He has a system with a reference client (000) and a customizing client (200). My guess would be:
    - Activate all required business functions in client 000.
    - Make sure, all BC-Sets have been extracted and activated perfectly.
    - Activate all missed BC-Sets manually in client 000.
    - Transport all changes to client 200.
    - Make sure the transport was performed successfully.
    - Activate all required business functions in 200.
    Is that the correct approach? I guess BC-Sets containing C-Tables can only be activated in a reference client!?
    Thanks. Kay.

    Sunny - Thanks for the reply and I appreciate the help.  You indicated that if transports do not have objects related to the business function, they may not be affected.  That's the crux of my question.  I certainly understand if SAP requires matching BF activation for any transports that change config in that area, but want to be sure an upgrade of one piece of functionality is not impacting ALL transports to related systems.
    Our main driver for the EHP project is updating functions in FSCM (Dispute Management, Collections, etc).  These are the only BFs we're intending to activate at this time.  I'll lay out an example of my question:
    EHP4 installed in all systems (Dev/QA/Prod).  Active Business Functions from EHP4 are only related to FSCM and they are only active in Dev system for unit testing.  Now say an issue arises in Prod related to Fixed Assets that requires a config change.  The normal method would be config in Dev, followed by unit testing.  Transport to QA for integration testing.  Finally transport to Prod.
    Would this transport go through b/c the config has nothing to do with the new business functions activated or would the transport not move to QA b/c the same BFs were not active in QA that were in Dev?
    Hope this helps clarify.  It seems SAP would never "back you in a corner" like that and the transport should go through, but I've seen stranger things happen!
    Thanks again!
    CK

  • E-Recruiting - Activation of Business Function

    Hi all,
    i'm facing a problem on our E-Recruiting Development System. I've activated Business Function HCM_ERC_SES_1 and try to work off SAP Note 1098046. Unfortunately there are no BC-Sets with prefix HRERC* visible in transaction SCPR20, so i don't know how to activate them.
    How can i get these BC Sets into our system. Is there a download site for .bcs Files or something like that?
    Regards
    Mark André

    Hi Mark
    You need to compare the table entries acc to the note from client 000 to prod client.
    Please review the note :
    E-recruiting-specific Customizing
    Most tables for the search are tables of type "C" (= Customizing tables;
    maintenance by customers only; no SAP import). In other words, after you
    unpack the BC sets, you have to reconcile the relevant tables in client
    000 (which contains the delivery Customizing) and the tables in the
    productive client. Below, you will find an overview over the relevant BC
    sets:
    Hope this helps.
    Best Regards

  • How to activate the business function HCM and HCM_LSO_CI_2

    Hi!
    To use the role of course administrator 1.4, we have to activate the business function HCM, Learning Solution 02 (HCM_LSO_CI_2).
    On IMG, I do not see about HCM_LSO_CI_2. Could you tell me the right way to do that?
    Please help.
    Thanks!

    Hi Linda
    You should be able to active business functions through SFW5 T code or by executing the very first (top) node in SPRO.
    Hope this helps
    Best Regards
    Reddy

  • What is business function switch?

    Hi,
        Can anyone tell me what business function switches are? And also how they are to be checked in the
    program (as to whether a business function is switched on or not)? Thanks.
    Regards,
    Suhas

    Hi,
    Here are the links which give wealthy info on Enhancement Frame Work(SWITCH).
    /people/thomas.weiss/blog/2006/01/24/what-the-new-enhancement-framework-is-for-150-its-basic-structure-and-elements-for-beginners
    /people/thomas.weiss/blog/2006/03/15/the-new-enhancement-framework-part-2--what-else-you-need-to-know-before-building-an-enhancement
    /people/thomas.weiss/blog/2006/04/03/how-to-define-a-new-badi-within-the-enhancement-framework--part-3-of-the-series
    /people/thomas.weiss/blog/2006/04/18/how-to-implement-a-badi-and-how-to-use-a-filter--part-4-of-the-series-on-the-new-enhancement-framework
    /people/thomas.weiss/blog/2006/05/03/source-code-enhancements--part-5-of-the-series-on-the-new-enhancement-framework
    /people/thomas.weiss/blog/2007/12/12/the-three-use-cases-of-the-enhancement-and-switch-framework--part-1
    /people/thomas.weiss/blog/2008/01/07/the-three-use-cases-of-the-enhancement-and-switch-framework--part-2
    /people/thomas.weiss/blog/2008/01/14/the-three-use-cases-of-the-enhancement-and-switch-framework--part-3
    /people/thomas.weiss/blog/2008/01/23/the-three-use-cases-of-the-enhancement-and-switch-framework--part-4-the-many-ways-to-enhance-a-sap-application-with-the-new-framework
    /people/thomas.weiss/blog/2008/02/04/the-three-use-cases-of-the-enhancement-and-switch-framework--part-5-the-basics-about-switching
    Creating Switch.
    1. in SFW1, Once you create your SWITCH and assign your package and Activate it, it shows in Active mode but the SWITCH is not still Active GLOBALLY.
    2. To activate it, create a Bussiness Function in SFW2 and assign your SWITCH to this and Activate it.
    2.1 Here if you select the Business Function as type ' INDUSTRY ', then again you need to assign this Business Function to Business Function Set in SFW3.
    2.1.1 In SFW3, Create a Business Funstion Set, and assign this Business Function to it and Activate it. But your SWICT is still it not active Globally.
    2.1.2 Go to SFW5, and Activate your Business Function Set here, then your SWICT is GLOBALLY ACTIVE
    2.2 If your Business Function is of type ' Add On ', then there is no need to assign it to any Business Function Set.
    2.2.1 Directly, go to SFW5, click on type ' Add Ons ', and after identifing your Business Function, Activate your Business Function here, then your SWITCH is GLOBALLY ACTIVE.
    But the final problem is : Once you activate your SWITCH, there is no other way to deactivate your SWICTH.
    Enhancement implementations are switchable.
    Steps to assign a switch to BADI Implementation:
    1) Assign the Enhancement Implementation containing the BADI implementation to a Package/development class.
    2)Assign this Package/development class to a switch in transaction SFW1.
    3)Make sure the switch you are using has state ON. For this assign this switch to an ACTIVE business function using transaction SFW2. A switch inherits the state of the business function.
    Reward Points if answer is useful.
    Regards,
    Raj.

  • Transporting a business function: lock out users and suspend batch?

    Hi gurus,
    SAP advises in help.sap.com to lock out all users and suspend batch jobs before activating a business function in development.  I did that in development, activated the business function, and saved it to a transport.  Does the same recommendation to lock out users and suspend batch jobs hold true in the QA and Production systems when the transport is moved in? ... or is it ok to transport it during a time when there is user and batch activity going on?
    Warm Regards,
    CM

    You do have to lock out users and suspend batch, even using a transport.  There is a pdf called
    SAP Enhancement Packages Selecting and Activating Business Functions,  In it, it says to lock out users and stop batch activity in all systems,

  • How to implement "Application Help" for activated Businiess Functions & Add Ons?

    Dear all
    I am setting up a SAP NetWeaver System with Business Function INSURANCE activated (for the use of FS-CD) and the reinsurance Add On FS-RI installed.
    I am able to set up "Application Help" in transaction SR13 for the "ERP/ECC part", meaning: When I open some "normal" ECC/ERP transaction, like MM03 oder PA20 and click on ("Help" in menubar >) "Application Help" in SAP Gui, a browser opens an shows me the context sensitive online help page for the corresponding transaction. (For PA20, this is "Displaying HR Master Data", for MM03 it's "Displaying Material Master Records")
    If I open an FS-RI transaction (like "/MSG/H_BORD1" oder "/MSG/R_V3"), I am only forwarded to the general SAP Library. But there is an online documentation available ("SAP for Industries" > "SAP Insurance Management" > ...)
    So, how to link the Business Functions and Add Ons with the Online Help?
    Is there a simple way to set up "Application Help" for activated Business Functions and installed Add Ons?
    I found some (online) documentation, but this is all more confusing than helping...
    Thanks for any help!
    Frank

    Second, when you create a Core Data Document Based application, XCode generates the MyDocument class, derivating from NSPersistentDocument. This class is dedicated to maintain the Managed Object Model and the Managed Object Context of each document of your application.
    There is only one Context and generally one Model for each Document.
    In Interface Builder, the Managed Object Context must be bound to the managedObjectContext of the MyDocument instance: it's the File's owner of the myDocument.xib Nib file.
    It's not the case in your Nib File where the Managed Object Context is bound to the invoiceID of the Invoice Controller.
    It's difficult to help you without an overall knowledge of your application, perhaps could you create an InvoiceItem Controller and bind its Content Set to the relationship of your invoice.

  • Business Functions PSM_GEN_BUDPER_1

    Dear experts, was activated and a user function PSM_GEN_BUDPER_1 unequivocally we now need to disable it:
    1 - How to disable the function?
    2 - If not possible what is the impact of staying active without set by the budget period?
    Thanks
    Silva Marck

    Silva,
    It is not possible to deactivate a Business Function after activation.  SAP has suggested activating Business Functions only after you have activated and tested in a sandbox environment.  With that said, you could:
    1.  Restore your system from a previous backup prior to activation
    2.  Deactivate the Budget Period by going to SPRO->Public Sector Management->General Settings for Public Sector Management->Basic Settings: Account Assignment Elements->Activate Account Assignment Elements
    If you chose to deactivate, you can still use the Fund only for assignment to the Applications of Funds.  There should be no other negative impacts; however, you should attempt the restore first and be careful to not activate a Business Function until you are 100% sure you are going to utilize the functionality.
    Thanks,
    Todd

  • Which Business Functions should be activated for China? (We have EHP6)

    Hi Gurus,
    We are in the process of planning SAP Rollout SD/FI/CO to China.
    Which Business Functions are typical to be activated for using SAP in China?
    (We have SAP ERP with EHP6)
    Thanks+Regards
    Dieter

    Hi Mark,
    Looking inside transation SFW5  (inside Enterprise Business Functions folder), my target FSCM components about FSCM are these in yellow:
    Now, I see FIN_FSCM_CCD_INTEGRATION_3 has a dependency with   FIN_FSCM_CCD_INTEGRATION. That means, just as you say, that I have to switch it on before number 3.
    However, I need to raise these two questions:
    1. There is no FIN_FSCM_CCD_3 at all inside SWF5, just INTEGRATION, is this important or not?
    2. Do I have to switch on FIN_FSCM_INTEGRATION (before FIN_FSCM_CCD_INTEGRATION and FIN_FSCM_CCD_INTEGRATION_3).
    I know it is a matter of Basic work, however I need to tell them which component to activate in order to have the latest functionality. And to be honest, I am not sure, mainly because I cannot find the FIN_FSCM_CCD nor FIN_FSCM_CCD_3 component in this installation, only ***INTEGRATION*** components. This is tricky.
    Please, be as accurate as you can in your respond.
    Thank you so much.
    Wilson.

Maybe you are looking for

  • How to check hidden items

    Hi, On a existing portal installation (10g Release 1) I've a lot of hidden items. I need to export these items to a new release of portal (10g Release 2). The information of hidden object is not define inside table wwv_things. I check on several tabl

  • Event Structure Freezes Vi After Capturing The First Event

    My Event structure catches the first instance of my button press but then it freezes my Vi.  The reason is because of the while loop but I need the while loop to constantly read from a serial port and send data to a serial port. The vi included is st

  • Not able to connect with AOL account on Linux

    I am trying to get connected with an AOL account on linux with my application that is using java mail- 1.4.2. . I am getting following exception:- Unable to connect to the host: imap.aol.com . Error -javax.mail.MessagingException: sun.security.valida

  • Iphoto 2 doesn't recognize my Digimax camera after upgrade

    since upgrading from osx 10.3 to 10.3.9 my Samsung Digimax U-CA3 camera is no longer recognized by iPhoto 2.0.1. Is it possible to download a driver? No driver was needed before as the computer supported the camera-up to 10.3! Does this mean the came

  • Driver Library to communicate with SQL Server database

    Hi All, I'm new to LabView and am hoping for a few guidelines to point me in the right direction for an application that I have to develop. I have to build an API to read/write to a database (SQL Server).  Another application will essentially have th