Active Directory Services Can't Connect to Domain

I removed Active Directory services form a server running 2012. I then went to reinstall and reconfigure it, but I keep running into issues. When I launch active directory admin center it gives me an error that it can't connect to any domain, and I can't
make any changes. The local server has already been promoted to the domain controller. Here is the output from dcdiag:
Directory Server Diagnosis
Performing initial setup:
   Trying to find home server...
   Home Server = ACSSVR
   * Identified AD Forest. 
   Done gathering initial info.
Doing initial required tests
   Testing server: Default-First-Site-Name\ACSSVR
      Starting test: Connectivity
         ......................... ACSSVR passed test Connectivity
Doing primary tests
   Testing server: Default-First-Site-Name\ACSSVR
      Starting test: Advertising
         Fatal Error:DsGetDcName (ACSSVR) call failed, error 1355
         The Locator could not find the server.
         ......................... ACSSVR failed test Advertising
      Starting test: FrsEvent
         ......................... ACSSVR passed test FrsEvent
      Starting test: DFSREvent
         There are warning or error events within the last 24 hours after the
         SYSVOL has been shared.  Failing SYSVOL replication problems may cause
         Group Policy problems. 
         ......................... ACSSVR failed test DFSREvent
      Starting test: SysVolCheck
         ......................... ACSSVR passed test SysVolCheck
      Starting test: KccEvent
         A warning event occurred.  EventID: 0x80000B46
            Time Generated: 03/02/2015   12:00:00
            Event String:
            The security of this directory server can be significantly enhanced by configuring the server to reject SASL (Negotiate,  Kerberos, NTLM, or Digest) LDAP binds that do not request signing (integrity verification)
and LDAP simple binds that  are performed on a cleartext (non-SSL/TLS-encrypted) connection.  Even if no clients are using such binds, configuring the server to reject them will improve the security of this server. 
         A warning event occurred.  EventID: 0x80000734
            Time Generated: 03/02/2015   12:00:37
            Event String:
            The local domain controller could not connect with the following domain controller hosting the following directory partition to resolve distinguished names. 
         ......................... ACSSVR passed test KccEvent
      Starting test: KnowsOfRoleHolders
         ......................... ACSSVR passed test KnowsOfRoleHolders
      Starting test: MachineAccount
         ......................... ACSSVR passed test MachineAccount
      Starting test: NCSecDesc
         ......................... ACSSVR passed test NCSecDesc
      Starting test: NetLogons
         Unable to connect to the NETLOGON share! (\\ACSSVR\netlogon)
         [ACSSVR] An net use or LsaPolicy operation failed with error 67,
         The network name cannot be found..
         ......................... ACSSVR failed test NetLogons
      Starting test: ObjectsReplicated
         ......................... ACSSVR passed test ObjectsReplicated
      Starting test: Replications
         ......................... ACSSVR passed test Replications
      Starting test: RidManager
         ......................... ACSSVR passed test RidManager
      Starting test: Services
         ......................... ACSSVR passed test Services
      Starting test: SystemLog
         A warning event occurred.  EventID: 0x000003F6
            Time Generated: 03/02/2015   11:21:34
            Event String:
            Name resolution for the name teredo.ipv6.microsoft.com. timed out after none of the configured DNS servers responded.
         A warning event occurred.  EventID: 0x000727A5
            Time Generated: 03/02/2015   11:21:58
            Event String:
            The WinRM service is not listening for WS-Management requests. 
         An error event occurred.  EventID: 0xC0001B58
            Time Generated: 03/02/2015   11:26:01
            Event String:
            The Vstor2 Virtual Storage Driver service failed to start due to the following error: 
         An error event occurred.  EventID: 0xC0001B58
            Time Generated: 03/02/2015   11:26:01
            Event String:
            The Vstor2 MntApi 2.0 Driver (shared) service failed to start due to the following error: 
         A warning event occurred.  EventID: 0x000003F6
            Time Generated: 03/02/2015   11:26:16
            Event String:
            Name resolution for the name teredo.ipv6.microsoft.com. timed out after none of the configured DNS servers responded.
         An error event occurred.  EventID: 0x0000002E
            Time Generated: 03/02/2015   11:34:32
            Event String:
            The time service encountered an error and was forced to shut down. The error was: 0x80070700: An attempt was made to logon, but the network logon service was not started.
         An error event occurred.  EventID: 0xC0001B6F
            Time Generated: 03/02/2015   11:34:32
            Event String:
            The Windows Time service terminated with the following error: 
         A warning event occurred.  EventID: 0x000727A5
            Time Generated: 03/02/2015   11:35:01
            Event String:
            The WinRM service is not listening for WS-Management requests. 
         A warning event occurred.  EventID: 0x000003F6
            Time Generated: 03/02/2015   11:39:08
            Event String:
            Name resolution for the name _ldap._tcp.dc._msdcs.ACS.local. timed out after none of the configured DNS servers responded.
         An error event occurred.  EventID: 0xC0001B58
            Time Generated: 03/02/2015   11:39:27
            Event String:
            The Vstor2 Virtual Storage Driver service failed to start due to the following error: 
         An error event occurred.  EventID: 0xC0001B58
            Time Generated: 03/02/2015   11:39:27
            Event String:
            The Vstor2 MntApi 2.0 Driver (shared) service failed to start due to the following error: 
         A warning event occurred.  EventID: 0x000727AA
            Time Generated: 03/02/2015   11:39:40
            Event String:
            The WinRM service failed to create the following SPNs: WSMAN/ACSSVR.ACS.local; WSMAN/ACSSVR. 
         A warning event occurred.  EventID: 0x0000000C
            Time Generated: 03/02/2015   11:39:39
            Event String:
            Time Provider NtpClient: This machine is configured to use the domain hierarchy to determine its time source, but it is the AD PDC emulator for the domain at the root of the forest, so there is no machine above it in
the domain hierarchy to use as a time source. It is recommended that you either configure a reliable time service in the root domain, or manually configure the AD PDC to synchronize with an external time source. Otherwise, this machine will function as the
authoritative time source in the domain hierarchy. If an external time source is not configured or used for this computer, you may choose to disable the NtpClient.
         A warning event occurred.  EventID: 0xC000042B
            Time Generated: 03/02/2015   11:42:01
            Event String:
            The RD Session Host server cannot register 'TERMSRV' Service Principal Name to be used for server authentication. The following error occured: The specified domain either does not exist or could not be contacted.
         An error event occurred.  EventID: 0x00000469
            Time Generated: 03/02/2015   11:44:31
            Event String:
            The processing of Group Policy failed because of lack of network connectivity to a domain controller. This may be a transient condition. A success message would be generated once the machine gets connected to the domain
controller and Group Policy has successfully processed. If you do not see a success message for several hours, then contact your administrator.
         An error event occurred.  EventID: 0x00000469
            Time Generated: 03/02/2015   11:45:05
            Event String:
            The processing of Group Policy failed because of lack of network connectivity to a domain controller. This may be a transient condition. A success message would be generated once the machine gets connected to the domain
controller and Group Policy has successfully processed. If you do not see a success message for several hours, then contact your administrator.
         An error event occurred.  EventID: 0x0000168F
            Time Generated: 03/02/2015   11:55:22
            Event String:
            The dynamic deletion of the DNS record 'ACS.acsolutionsinc.net. 600 IN A 192.168.56.1' failed on the following DNS server:  
         A warning event occurred.  EventID: 0x000003F6
            Time Generated: 03/02/2015   11:55:22
            Event String:
            Name resolution for the name acsolutionsinc.net timed out after none of the configured DNS servers responded.
         An error event occurred.  EventID: 0x0000168F
            Time Generated: 03/02/2015   11:55:47
            Event String:
            The dynamic deletion of the DNS record '_ldap._tcp.ACS.acsolutionsinc.net. 600 IN SRV 0 100 389 ACSSVR.ACS.acsolutionsinc.net.' failed on the following DNS server:  
         A warning event occurred.  EventID: 0x000727A5
            Time Generated: 03/02/2015   11:55:53
            Event String:
            The WinRM service is not listening for WS-Management requests. 
         A warning event occurred.  EventID: 0x000003F6
            Time Generated: 03/02/2015   11:55:53
            Event String:
            Name resolution for the name _ldap._tcp.Default-First-Site-Name._sites.dc._msdcs.ACS.local. timed out after none of the configured DNS servers responded.
         A warning event occurred.  EventID: 0x000003F6
            Time Generated: 03/02/2015   11:59:53
            Event String:
            Name resolution for the name _ldap._tcp.dc._msdcs.ACS.local. timed out after none of the configured DNS servers responded.
         An error event occurred.  EventID: 0xC0001B58
            Time Generated: 03/02/2015   12:00:13
            Event String:
            The Vstor2 Virtual Storage Driver service failed to start due to the following error: 
         An error event occurred.  EventID: 0xC0001B58
            Time Generated: 03/02/2015   12:00:13
            Event String:
            The Vstor2 MntApi 2.0 Driver (shared) service failed to start due to the following error: 
         A warning event occurred.  EventID: 0x000727AA
            Time Generated: 03/02/2015   12:00:25
            Event String:
            The WinRM service failed to create the following SPNs: WSMAN/ACSSVR.ACS.local; WSMAN/ACSSVR. 
         A warning event occurred.  EventID: 0x0000000C
            Time Generated: 03/02/2015   12:00:25
            Event String:
            Time Provider NtpClient: This machine is configured to use the domain hierarchy to determine its time source, but it is the AD PDC emulator for the domain at the root of the forest, so there is no machine above it in
the domain hierarchy to use as a time source. It is recommended that you either configure a reliable time service in the root domain, or manually configure the AD PDC to synchronize with an external time source. Otherwise, this machine will function as the
authoritative time source in the domain hierarchy. If an external time source is not configured or used for this computer, you may choose to disable the NtpClient.
         A warning event occurred.  EventID: 0xC000042B
            Time Generated: 03/02/2015   12:02:47
            Event String:
            The RD Session Host server cannot register 'TERMSRV' Service Principal Name to be used for server authentication. The following error occured: The specified domain either does not exist or could not be contacted.
         An error event occurred.  EventID: 0x00000469
            Time Generated: 03/02/2015   12:05:17
            Event String:
            The processing of Group Policy failed because of lack of network connectivity to a domain controller. This may be a transient condition. A success message would be generated once the machine gets connected to the domain
controller and Group Policy has successfully processed. If you do not see a success message for several hours, then contact your administrator.
         An error event occurred.  EventID: 0x00000469
            Time Generated: 03/02/2015   12:05:17
            Event String:
            The processing of Group Policy failed because of lack of network connectivity to a domain controller. This may be a transient condition. A success message would be generated once the machine gets connected to the domain
controller and Group Policy has successfully processed. If you do not see a success message for several hours, then contact your administrator.
         ......................... ACSSVR failed test SystemLog
      Starting test: VerifyReferences
         ......................... ACSSVR passed test VerifyReferences
   Running partition tests on : Schema
      Starting test: CheckSDRefDom
         ......................... Schema passed test CheckSDRefDom
      Starting test: CrossRefValidation
         ......................... Schema passed test CrossRefValidation
   Running partition tests on : Configuration
      Starting test: CheckSDRefDom
         ......................... Configuration passed test CheckSDRefDom
      Starting test: CrossRefValidation
         ......................... Configuration passed test CrossRefValidation
   Running partition tests on : ACS
      Starting test: CheckSDRefDom
         ......................... ACS passed test CheckSDRefDom
      Starting test: CrossRefValidation
         ......................... ACS passed test CrossRefValidation
   Running enterprise tests on : ACS.local
      Starting test: LocatorCheck
         Warning: DcGetDcName(GC_SERVER_REQUIRED) call failed, error 1355
         A Global Catalog Server could not be located - All GC's are down.
         Warning: DcGetDcName(TIME_SERVER) call failed, error 1355
         A Time Server could not be located.
         The server holding the PDC role is down.
         Warning: DcGetDcName(GOOD_TIME_SERVER_PREFERRED) call failed, error
         1355
         A Good Time Server could not be located.
         Warning: DcGetDcName(KDC_REQUIRED) call failed, error 1355
         A KDC could not be located - All the KDCs are down.
         ......................... ACS.local failed test LocatorCheck
      Starting test: Intersite
         ......................... ACS.local passed test Intersite
I've been trying to debug errors one at a time, but I'm having a hard time finding any information that pertains to this issue as a whole. Anything you can tell me about this would be great, thank you for reading. 

It was the only server in the network, the only dc in the old forest. When I re-installed ad ds I gave the new forest different name, but I guess the old settings are still in the system somewhere conflicting with the new setup? Is there a way to
purge the old setup entirely and start over with ad ds, or am I going to have to re-install the whole OS? Thanks again for the help.
Honestly, the best way to handle this is to rebuild the server. There are many things that are "left behind" when you remove the Domain / Forest from a Domain Controller. In fact many articles will say after using ADMT (active directory migration
tool) you should decommission the original Domain Controller (aka reinstall the OS).
While you could spend more time trying to get that domain controller working, it absolutely is going to be 1) More reliable 2) faster to reinstall the OS on the old domain controller. If you are still leveraging storage, or services on that domain controller,
you will want to back them up, or have a transition plan before reinstalling everything on the server. I have a feeling if you choose to keep troubleshooting this, you will run into more issues down the road.
Entrepreneur, Strategic Technical Advisor, and Sr. Consulting Engineer - Strategic Services and Solutions Check out my book - Powershell 3.0 - WMI: http://amzn.to/1BnjOmo | Mastering PowerShell Coming in April 2015!

Similar Messages

  • Storage Integration with Active Directory Services Part 2

    /* Style Definitions */
    table.MsoNormalTable
    {mso-style-name:"Table Normal";
    mso-tstyle-rowband-size:0;
    mso-tstyle-colband-size:0;
    mso-style-noshow:yes;
    mso-style-priority:99;
    mso-style-qformat:yes;
    mso-style-parent:"";
    mso-padding-alt:0in 5.4pt 0in 5.4pt;
    mso-para-margin:0in;
    mso-para-margin-bottom:.0001pt;
    mso-pagination:widow-orphan;
    font-size:11.0pt;
    font-family:"Calibri","sans-serif";
    mso-ascii-font-family:Calibri;
    mso-ascii-theme-font:minor-latin;
    mso-fareast-font-family:"Times New Roman";
    mso-fareast-theme-font:minor-fareast;
    mso-hansi-font-family:Calibri;
    mso-hansi-theme-font:minor-latin;}
    Having your storage device join Active Directory Services can be relatively straightforward.  What do do if the JOIN button fails?  This demo goes through a basic checklist from network to server. Demo covers integration between the NSS2000/3000/4000/6000 platform and Microsoft ADS Server 2003.
    Part 1 - Network Overview
    Part 2 - NSS Configuration
    Part 3 - Connecting a share
    Part 4 - Server 2003 Administration
    Note: Some artistic license was used to make the test environment more easy to illustrate but the principles are the same in a live network.

    Hi Angus,
    Policy Server does not require a specific LDAP schema. During configuration you simply map the LDAP attributes of your schema to the ones that Policy Server supports (e.g., common name, email address, etc).
    If you are configuring Policy Server to use an LDAP, it will use the LDAP to authenticate the user (Policy Server does not store the password itself in this case).
    If passwords are stored outside of the LDAP (e.g., in a database), it is possible to write a custom authentication provider to authenticate against this source.
    Hope this helps,
    -Bill

  • Storage Integration with Active Directory Services Part 4

    /* Style Definitions */
    table.MsoNormalTable
    {mso-style-name:"Table Normal";
    mso-tstyle-rowband-size:0;
    mso-tstyle-colband-size:0;
    mso-style-noshow:yes;
    mso-style-priority:99;
    mso-style-qformat:yes;
    mso-style-parent:"";
    mso-padding-alt:0in 5.4pt 0in 5.4pt;
    mso-para-margin:0in;
    mso-para-margin-bottom:.0001pt;
    mso-pagination:widow-orphan;
    font-size:11.0pt;
    font-family:"Calibri","sans-serif";
    mso-ascii-font-family:Calibri;
    mso-ascii-theme-font:minor-latin;
    mso-fareast-font-family:"Times New Roman";
    mso-fareast-theme-font:minor-fareast;
    mso-hansi-font-family:Calibri;
    mso-hansi-theme-font:minor-latin;}
    Having your storage device join Active Directory Services can be relatively straightforward.  What do do if the JOIN button fails?  This demo goes through a basic checklist from network to server. Demo covers integration between the NSS2000/3000/4000/6000 platform and Microsoft ADS Server 2003.
    Part 1 - Network Overview
    Part 2 - NSS Configuration
    Part 3 - Connecting a share
    Part 4 - Server 2003 Administration
    Note: Some artistic license was used to make the test environment more easy to illustrate but the principles are the same in a live network.

    Hi Angus,
    Policy Server does not require a specific LDAP schema. During configuration you simply map the LDAP attributes of your schema to the ones that Policy Server supports (e.g., common name, email address, etc).
    If you are configuring Policy Server to use an LDAP, it will use the LDAP to authenticate the user (Policy Server does not store the password itself in this case).
    If passwords are stored outside of the LDAP (e.g., in a database), it is possible to write a custom authentication provider to authenticate against this source.
    Hope this helps,
    -Bill

  • Active Directory accounts no longer connect to Server

    I administrate a small office network.
    We have a Windows 2000 Server with active directory and a Windows 2003 Storage Server Appliance. (From Iomega)
    After upgrading to 10.4.8 (it seems), our Mac integrated to the Active Directory has had problems connecting to the storage server.
    When attempt to connect to smb://storage (the 2003 server appliance) we get a Error code -36 -- could not be read or written.
    This only happens when logged into an AD account. Local accounts on the machine access the server as normal.
    Also of note, the AD accounts have no problems accessing shares on the 2000 server.
    Any ideas why this is only effecting AD accounts and a solution?

    There are a couple of things you can check...
    1. Check to make sure that the SMB signing option is disabled for the Windows 2003 Storage appliance. This can be done in the local group policy on the Server.
    2. If it is a storage appliance, you should be able to run Microsoft's Services for Macintosh. This would give you AFP on the file server - a potential way to eliminate the need for using SMB on the Macs.
    3. Use a 3rd party software on the Windows 2003 Storace Server called ExtremeZ-IP by Group Logic. It is a full featured AFP/IP file server for Windows (replacing SFM). We have an HP DL380 NAS device on our network (running Windows 2003 Storage Edition) that has 1.5 TB of storage for our MAc users. We use ExtremeZ-IP... I have nothing bu great things to say for it...

  • Active Directory service discovery failed

    Hi forum user,
    I have integrated my SGD with AD.
    I saw the following error in jserver log file:
    # more jserver2698_error.log
    2007/07/24 15:25:22.626 (pid 2698) server/ldap/error #1185261922626
    Sun Secure Global Desktop Software (4.31) ERROR:
    Active Directory service discovery failed: Failed to find any valid Site objects.
    Looking up Global Catalog DNS name: gc.tcp.telbru.com.bn. - HIT
    Looking for GC on server: Active Directory:ts1.telbru.com.bn:/172.25.11.96:3268:Up - HIT
    Checking for CN=Configuration: DC=telbru,DC=com,DC=bn - MISS
    Checking for CN=Configuration: CN=Configuration,DC=telbru,DC=com,DC=bn - HIT
    Looking up domain root context: DC=telbru,DC=com,DC=bn - HIT
    Looking up site context: CN=Sites,CN=Configuration
    Searching for sites: (&(objectClass=site)(siteObjectBL=*)) - HIT
    Looking up addresses for peer DNS: portal.telbru.com.bn - HIT
    Failed to discover Active Directory Site, Domain and server data.
    This might mean LDAP users cannot log in.
    Make sure the DNS server contains the Active Directory service
    records for the forest. Make sure a Global Catalog server is available.
    Why the error occurred ?
    What is the resolution to this error ?
    Appreciate any help. Thanks.

    This error message is telling you that SGD failed to find any site objects in your AD tree. This should not stop users from logging in, it will just mean that SGD will not be able to work out which AD site is local to the SGD server.
    If you are not using sites in your AD setup, then you do not need to worry about this.
    Hope this helps,
    DD

  • HT201407 Hello All, I bought an iPhone of eBay. It seemed fine until this morning when it switched itself off and now it won't come on unless it's plugged in. And even then it is asking that it needs to be activated, but it can't connect to iTunes. Any su

    Hello All, I bought an Iphone of eBay. It seemed fine until this morning when it switched itself off and now it won't come on unless it's plugged in. And even then it is asking that it needs to be activated, but it can't connect to iTunes

    Try Recovery Mode... http://support.apple.com/kb/HT1808

  • Changes in Microsoft Active Directory Services into a file

    I am in need of sample code to capture changes in Active Directory services into a flat file.
    Here is my requirement:
    I would like to capture user information changes from the Active directory server into a flat file.
    For an example, When a user is newly created in Actives Directory Server, I need to Capture that user info and write into a flat file. Similarly for update and delete user in Activer Directory server, i need to capture the changes and write into a file.
    Would appreciate, if any could help me on this
    Thanks in advance
    Thanks
    Kumar

    Refer to:
    JNDI, Active Directory & Persistent Searches (part 1) http://forum.java.sun.com/thread.jspa?threadID=578338&tstart=200
    There was another topic that I posted called JNDI, Active Directory and Persistent Searches (part 2) in which I described teh LDAPNotification Control.
    It had the following URL http://forum.java.sun.com/thread.jspa?threadID=578342&tstart=200 however it seems as though I have suffered another case of the forum losing my posts.

  • DNS The Zone cannot be deleted - the active directory service is not available

    Hello TechNet Members,
    As you can see from the Summery, I got this message when I'm trying to delete DNS Zone.
    It's not matter if the DNS Zone newly created or its an Old One.
    After this message the computer is telling you "The Computer is about to make Restart".
    It's so strange and i really don't know what to check first.
    More Information:
    5 Servers that Replicate together.
    The Operation System is Windows Server 2012R2 for all the entire DC's
    1 Domain In the Forest.
    Thanks,

    Hi Jesper,
     DCdiag /fix and no errors in there everything marked as PASSED.
     I did Demotion for one of the DC to troubleshoot, but with no luck i'm back to the same point i started
     I tried to delete the brand new Zone from the commandline using DNScmd it's still not working and the  computer is reboot himslef.
    I've checked the permissions from the ADSIEdit.msc:
    Inherit from MicrosoftDNS section to the ROOT
    DNSAdmins > Full Control
    Domain Admins > Full Control
    From "DNS Server" section at the EventViewer
    The DNS server is waiting for Active Directory Domain Services (AD DS) to signal that the initial synchronization of the directory has been completed. The DNS server service cannot start until the initial synchronization is complete because critical DNS
    data might not yet be replicated onto this domain controller. If events in the AD DS event log indicate that there is a problem with DNS name resolution, consider adding the IP address of another DNS server for this domain to the DNS server list in the Internet
    Protocol properties of this computer. This event will be logged every two minutes until AD DS has signaled that the initial synchronization has successfully completed.
    "The DNS server was unable to complete directory service enumeration of zone TestZone1.  This DNS server is configured to use information obtained from Active Directory for this zone and is unable to load the zone without it.  Check that the Active
    Directory is functioning properly and repeat enumeration of the zone. The extended error debug information (which may be empty) is "". The event data contains the error. "
    The DNS server has encountered a critical error from the Active Directory. Check that the Active Directory is functioning properly. The extended error debug information (which may be empty) is "". The event data contains the error.
    Thanks,

  • Strange DNS, Group Policy & Active Directory Issues - Can't track down root issue!

    For the last few weeks, we've been getting complaints, from our developers, about not being able to authenticate on various systems.  The issues were hit & miss but still problematic enough to warrant our looking into it.  It seems to be getting
    worse...  I now have new servers that aren't getting group policy updates.  They may get some, like the list of local admins but won't pick up NTFS permissions for folder-access.  Those that pick up the AD group full of local admins have trouble
    authenticating members of the group.  Some were showing event log entries regarding authentication issues due to being unable to contact an AD DC.  We reloaded that DC but many of the issues still persist.  At this point, I'm running
    out of places to look for ideas.  I've spent the last week looking up Event Log IDs and looking though their meanings and possible remedies but, again, the issues persist.  It doesn't seem to matter what the OS is.  We've been seeing
    this on 2008, 2008-R2 & 2012-R2.
    Here are some examples of events I'm seeing.  I can't figure out the root cause(s).
    Log Name: Application
    Source: Group Policy Files
    Date: 2/19/2015 2:35:12 PM
    Event ID: 4098
    Task Category: (2)
    Level: Warning
    Keywords: Classic
    User: SYSTEM
    Computer: H2T8-IOLDP1.HOMENET.local
    Description:
    The computer 'uptime.exe' preference item in the 'APPS (UpTime) {3BF05605-27C0-43AD-AC0F-873B678EB217}' Group Policy Object did not apply because it failed with error code '0x80090006 Invalid Signature.' This error was suppressed.
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
    <System>
    <Provider Name="Group Policy Files" />
    <EventID Qualifiers="34305">4098</EventID>
    <Level>3</Level>
    <Task>2</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2015-02-19T19:35:12.000000000Z" />
    <EventRecordID>1871</EventRecordID>
    <Channel>Application</Channel>
    <Computer>H2T8-IOLDP1.HOMENET.local</Computer>
    <Security UserID="S-1-5-18" />
    </System>
    <EventData>
    <Data>computer</Data>
    <Data>uptime.exe</Data>
    <Data>APPS (UpTime) {3BF05605-27C0-43AD-AC0F-873B678EB217}</Data>
    <Data>0x80090006 Invalid Signature.</Data>
    </EventData>
    </Event>
    Log Name: Microsoft-Windows-TerminalServices-RemoteConnectionManager/Admin
    Source: Microsoft-Windows-TerminalServices-RemoteConnectionManager
    Date: 2/19/2015 9:38:13 AM
    Event ID: 20499
    Task Category: None
    Level: Warning
    Keywords:
    User: NETWORK SERVICE
    Computer: H2T8-IOLDP1.HOMENET.local
    Description:
    Remote Desktop Services has taken too long to load the user configuration from server \\h2s3-addc1.HOMENET.local for user RSickler
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
    <System>
    <Provider Name="Microsoft-Windows-TerminalServices-RemoteConnectionManager" Guid="{C76BAA63-AE81-421C-B425-340B4B24157F}" />
    <EventID>20499</EventID>
    <Version>0</Version>
    <Level>3</Level>
    <Task>0</Task>
    <Opcode>0</Opcode>
    <Keywords>0x4000000000000000</Keywords>
    <TimeCreated SystemTime="2015-02-19T14:38:13.182363700Z" />
    <EventRecordID>4</EventRecordID>
    <Correlation />
    <Execution ProcessID="1932" ThreadID="2156" />
    <Channel>Microsoft-Windows-TerminalServices-RemoteConnectionManager/Admin</Channel>
    <Computer>H2T8-IOLDP1.HOMENET.local</Computer>
    <Security UserID="S-1-5-20" />
    </System>
    <UserData>
    <EventXML xmlns="Event_NS">
    <ServerName>\\h2s3-addc1.HOMENET.local</ServerName>
    <UserName>RSickler</UserName>
    </EventXML>
    </UserData>
    </Event>
    Note that these servers are sitting in OUs that are full of other servers that don't have these issues.  These GPOs have been in place for years.  I suspect there's a deeper issue with AD, GP or a combination thereof.  The group policy issues
    seem to only affect freshly loaded servers...

    Hello,
    assure that no firewall is blocking connection for AD required ports as listed in
    https://technet.microsoft.com/en-us/library/dd772723(WS.10).aspx
    You have error about not connect setup from AD sites and services with the used subnets in your network and linking them to the correct site, please check this in AD sites and services and also have the DCs placed correct to the site they belong to.
    "During the past 4.20 hours there have been 83 connections to this Domain Controller from client machines whose IP addresses don't map to any of the existing sites in the enterprise. Those clients, therefore, have undefined sites and may connect to
    any Domain Controller including those that are in far distant locations from the clients. A client's site is determined by the mapping of its subnet to one of the existing sites. To move the above clients to one of the sites, please consider creating subnet
    object(s) covering the above IP addresses with mapping to one of the existing sites.  The names and IP addresses of the clients in question have been logged on this computer in the following log file '%SystemRoot%\debug\netlogon.log' and, potentially,
    in the log file '%SystemRoot%\debug\netlogon.bak' created if the former log becomes full. The log(s) may contain additional unrelated debugging information. To filter out the needed information, please search for lines which contain text 'NO_CLIENT_SITE:'.
    The first word after this string is the client name and the second word is the client IP address. The maximum size of the log(s) is controlled by the following registry DWORD value 'HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Netlogon\Parameters\LogFileMaxSize';
    the default is 20000000 bytes.  The current maximum size is 20000000 bytes.  To set a different maximum size, create the above registry value and set the desired maximum size in bytes."
    This error is about a not run adprep /rodcprep:
    Starting test: NCSecDesc
             Error NT AUTHORITY\ENTERPRISE DOMAIN CONTROLLERS doesn't have
                Replicating Directory Changes In Filtered Set
             access rights for the naming context:
             DC=ForestDnsZones,DC=HOMENET,DC=local
             Error NT AUTHORITY\ENTERPRISE DOMAIN CONTROLLERS doesn't have
                Replicating Directory Changes In Filtered Set
             access rights for the naming context:
    So either run the command on a DC or ignore this error.
    Please provide also the following data as file:
    ipconfig /all >c:\ipconfig.log [all DCs]
    dcdiag /v /c /d /e /s:dcname >c:\dcdiag.log
    repadmin /showrepl dc* /verbose /all /intersite >c:\repl.log  ["dc* is a place holder for the starting name of the DCs if they all begin the same (if more then one DC exists)]
    dnslint /ad /s "DCipaddress" (http://support.microsoft.com/kb/321045)
    ADREPLSTATUS:
    http://www.microsoft.com/en-us/download/details.aspx?id=30005 can also be exported to file.
    As the output will become large, DON'T post them into the thread, please use Windows Sky Drive(with open access!)
    https://skydrive.live.com and add the link from it here. Also the /e in dcdiag scans the complete forest, so better run it on COB.
    Best regards
    Meinolf Weber
    MVP, MCP, MCTS
    Microsoft MVP - Directory Services
    My Blog: http://blogs.msmvps.com/MWeber
    Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.
    Twitter:  
    Info you requested:
    ipconfig_dcs.txt
    dcdiag.txt
    repl.log
    dnslint.htm
    ADREPLSTATUS: ADReplicationStatus.2015.2.23.9.21.16.csv ADReplicationStatusToolData.zip

  • DsRemoveDsDomainW error 0x2015 (The directory service can perform the requested operation only on a leaf object.)

    Please help me to delete the Dead domain (was a domain the in parent forest, but to child domain), which had trust with parent domain as well. It showing presence in Active Directory Domains & Trust also.
    Please show me a path to remove dead domain.
    Thank you.
    -Shamil

    Hi,
    To remove a domain from a forest, we need to demote every Domain Controller in this domain or perform
    metadata cleanup using ntdsutil.exe tool.
    We can run Dcpromo.exe to demote a DC, please remember to select
    This server is the last domain controller in the domain check
    box when you are demoting the last DC in
    the domain.
    Please make sure that DCs in this domain don’t holder any forest-wide FSMO roles.
    If all domain controllers have been taken offline without demotion process, we can
    perform metadata cleanup to remove this domain.
    You can use ntdsutil.exe tool to connect to the
    Domain Naming Master role holder, then remove the specific domain from the forest.
    For more information please refer to these articles below:
    How to remove orphaned domains from Active Directory
    http://support.microsoft.com/kb/230306
    Remove a domain
    http://technet.microsoft.com/en-us/library/cc786082(v=WS.10).aspx
    I hope this helps.
    Amy Wang

  • ACS Integration with Microsoft Active Directory Services

    Hello Everyone,
    I've been tasked to design the integration of ACS with MS AD. What I want to know is the below assuming I have a software ACS or a ACS device and the protocol for authentication is Radius
    - What is the criteria for the AD to integrate with ACS software of appliance
    - Should that AD be hosted on the domain controller or not?
    - If not, on what (Domain Controller, Tree, Forest, Branch, Flower, Fruit  ) should the AD be hosted on?
    - What will I have to do to authenticate users logging into Cisco Security Manager with ACS integrated with AD?
    - Are there any other dependencies that I will have to categorically mention in my design document?
    Thanks,
    Rishi

    In ACS v5.x, there is a screen for integrating the ACS with AD. 
         (Users and Identity Stores > External Identity Stores > Active Directory)
    Just enter the local domain name (domain.com) and a valid AD administrator account username and password, and the ACS will connect to the domain.  This allows you to use existing AD credentials to login and administer your network devices. 
    Tying the ACS to AD really only takes one screen and less than a minute, but you will still have to tell the ACS which AD groups get which permissions (for example, read-only or read-write access), and you will have to setup a search sequence (Users and Identity Stores > Identity Store Sequences) to tell ACS to first look at AD for credentials, then check the local ACS user database for valid accounts.  The permissions part is still fairly quick, and it only takes me about 45 minutes to build an ACS from scratch including all AD integration and custom RADIUS attributes for some of our devices. 
    The authentication would occur like this:
    User SSH/telnet/console to device
    Device contacts ACS using TACACS or RADIUS
    User receives login prompt and enters AD credentials
    Devices sends credentials to ACS
    ACS validates credentials in AD
    ACS sends authentication OK message to Device
    Device logs user in.
    Command Authorization looks something like this:
    User enters a command
    Device sends command authorization request to ACS
    ACS looks at which AD group the user belongs to and looks up permissions configured in ACS for that group
    Based on the permissions you have assigned, ACS either sends an allow or deny message to the Device
    Device allows or denies the user command.
    Criteria:  We use an ACS 5.2 virtual machine and have had it work perfectly with Server 2003 and Server 2008.
    AD is hosted on our local domain controller (Bonus:  no planting of flowers required!)
    Dependencies: 
    Issue:  The Device looks to ACS.  ACS looks to AD.  If AD fails, users cannot use their AD credentials to login.
              Device ---> ACS ---> AD
    Solution:  Configure the Device to look at ACS first, then a local table if ACS is not available.  Also, configure the ACS to look at AD first, then a local ACS account list if AD is not available.  (You can configure local user accounts on the Device and in the ACS) 
              Device ---> ACS ---> AD
              Device ---> ACS ---> AD ---> ACS local
              Device ---> ACS ---> AD ---> ACS local ---> Device local
    The new version of Cisco ACS is UNIX-based, and you can download a free trial to load up and try before you buy.  It is far FAR superior to the old ACS v3.3 that we had for years.
    I hope this helps for your design document!
    --Chris

  • Windows Server Active Directory services

    Hi,
    We have installed Windows server 2008 R2 as a primary domain controller.
    the domain controller "xxxxxxx" (2008R2 SP1) gets freeze intermittently and at the time of issue we are not able to ping and take RDP session of this server from any other server.In the
    event log : 4015
    The DNS server has encountered a critical error from the Active Directory. Check that the Active Directory is functioning properly. The extended error debug information (which may be empty) is "". The event data contains the error.
    Kindly advice how to resolve this issue.
    Thanks,
    Balaji

    Hello,
    Could you check your servers hdd, nic and another services pls. Also this error (4015) occur  DC is not respond requests
    from the DNS Server. 
    Check your DNS functionality  (Dcdiag /test:DNS) and  refer these
    articles please.
    DNS Event Id: 4015, 4513 and 4514
    Event ID 4015 — DNS Server Active Directory Integration
    Regards,
    Elguc

  • Active Directory Binding Post 10.5.2 (Domain authentication that works!)

    Main points: Be sure your local time is being updated by a time server on your network, be sure that all devices are syncing with the same NTP server.
    Pre add your computer you want to bind in your domain.
    Key: in Directory Utility, choose to authenticate against a known server. So under the Administrative tab choose "prefer this domain server" and enter in the DNS name of a DC in your domain. Also uncheck authentication with any DC in the forest.
    Now bind and click Ok.
    Now in Directory Utility, click on Search Policy, and add servers in the Authentication tab by choosing Custom Path. Click the + and you should see your domain or multiple domains in your forrest listed. Add them appropriately. In some configurations, you may want to do this for "Contacts".
    You can now go back into the Active Directory plugin, and choose to authenticate from any DC in the forest, and remove the selection that allows only authenticating against one server.
    Sorry for the lack of deep explanation, but if you are at the point where the AD and DNS is working fine, then this should be pretty straightforward and to the point.

    alex.est wrote:
    miscategorized and inaccurate this post is from 2004 and has no relevance to 10.5.2
    What? I wrote this the day that it says I did. And, yeah this solved issues with 10.5.2's AD binding issues.

  • How to handle SQL connection if password Active directory always change? (Connection using Active directory via network SQL 2012 )

    I have 3 server (Web server, database sql 2012 server and Active directory). I'm using sqlsvr version 3.0,  PHP version 5.3 ,IIS version 7 and windows server 2008.
    Right now my php connection to SQL 2012 using AD id, so How to handle if password on active directory change?

    Solved : Using Kaberos

  • Since 2.2.1, Active Sync show "can't connect" errors fairly often...

    The only thing I've seen thus far on the negative side is the recurring "can't connect to server" errors.
    A reset seems to help, but I didn't have this with previous versions.
    Anyone else seeing this?
    Scott

    I'm having the same issue. It only seems to happen with 3g, no issues with wifi. Resetting the iphone helps for a few minutes then the error returns. Was having the issue until today (Feb 1, 2009). Now seems to be working normally. Hope Apple/at&t have figured this out and it won't come back.

Maybe you are looking for

  • Iphone, Ipod touch and a new computer

    Hi all, lengthy post so here goes... I had an older computer that I had synced with my Ipod touch and newly purchased Iphone. Some how the old computer decided to pack it in and I can't access the internet on it. I purchased a new computer, installed

  • Salary and Employment Verification - UWL issue.

    Hi All, We have deployed ESS 1.41, MSS 1.41 and HRAS 1.41 business packages on Portal EP7.0 EHP1 SP7 When an Employee request for Salary and Employment Verification Letter by going thru ESS-> Benefits and Payament->Salary and Employment Verification,

  • N97 Facebook App Problem

    Hello, i just purchased a Nokia N97 and the Facebook Application on the front screen does not work. It keeps saying "incorrect signature". I can log into Facebook through the web, but would much prefer to use the phone app. Does anyone know how to fi

  • Info record price change

    Hi How to change the price in info record which is already in use? It's greyed in the combination in info record. regards

  • After Mavericks Update Arris Modem now going to standby mode when iMac sleeps

    After installing Mavericks on iMac, whenever the iMac (connected wirelessly to the network with Airport Extreme 5th Gen) goes to sleep it is causing our modem to enter standby mode which limits internet access to all devices on the wireless network e