Active Ingredient Management with Logarithmic Scale

Dear Gurus,
I would like to manage the batch specific concentration of an active ingredient that is measured on a log scale.  This is similar to pH, but the active ingredient I would like to manage is a virus particle.
Any guidance would be appreciated,
MediSteve

Dear MediSteve
You could use the Characteristics
Characteristics are criteria according to which you can search for batches. These characteristics are defined when creating a class. There are two different types of characteristic:
User-defined characteristics :
These are characteristics which are not defined as fields in the batch master record.
For example: Active ingredient potency, viscosity, color, weight
please look here:
http://help.sap.com/saphelp_47x200/helpdata/en/4d/2b8bd043ad11d189410000e829fbbd/frameset.htm
good luck.

Similar Messages

  • Active Ingredient management error in valuation

    Dear gurus,
    We have a business process involving active ingredient management system, the process is as follows.
    1, PO creation
    2, GR against PO with automatic batch creation in Migo (with out entering characteristics)
    3, Material After tested the characteristic values for the batch are updated in MSC2N.
    4, MIRO for PO
    Now my problem is lets say i have maintained in Proportion/Product Unit tab "Plan value " for a characteristic as 95.
    We have batch wise split valuation and payment processed according to this batch. In PO we have maintained a OPU same as that of the characteristic.
    Since we are not maintaining any characteristic value in GRN the Qty in PO price unit in MIgo doc is updated according to the Plan value in material master which makes MIRO value to calculate wrongly.
    Please advice to solve this issue
    Regards

    Hai,
    The problem is if i enter the Characteristic value in migo then all the calculations are coming correct. But our business process requires to enter the characteristic value in MSC2N because of which calculations are incorrect.
    Regards

  • Active Ingredient Management

    Hi SAP experts.
    We want to activate Active Ingredient Management.
    But before moving further, would like to know:
    1  What processes are affected after activation (Ingredient Managementis necessary only for some materials)? For, example
    * there will be fields obligatory for filling
    * it will be necessary to create additional objects or documents in system
    * etc.
    i.e. how strong the current business processes will be affected
    2. The content of ingredient in each new delivery a miscellaneous, but receiption to do only in one batch. The amount of ingredient will be an average? Issue will be average amount of ingredient?
    For example.
    * 101 movement type: 
    2 pieces contain 200 grams of ingredient (1 = 100)
    1 piece contains 130 grams of ingredient
    therefore
    in system 1 piece  will contain 110 grams?
    * 261 movement type
    2 will contain 220grams of ingredient?
    Thanks for answers.

    Hi,
    In Bom you are bom qty is 10 Kai that time system do not know what are the result for batches avalable.
    If you keep 10 KG in BOM then if you determine material of 90.00 % then in that case avtual potency you will get it 9 KAI only..
    So when you determine the batches in process order it will pick qty in KG by converting in result.
    If you are same problem again then check again your MIC for which class charecteristic attached.also see in MIC reference charecteristic on.
    Boss I am using this concept regularly in my project its running fine.
    So please revert me back.
    Regards
    SANIL
    One more setting in QS61 select your materail & ente. .Where you can see all charecteristics assign in class which is used in your material.master.In this screen select all charecteristic line item except your potency.charecteristic ,delte all selected line item
    Now with only your desire charecteristic potency save the screen.
    Here actually you are assigning class charecteristic to material.
    Regards
    SANIL
    Edited by: Sanil Vadke on Apr 15, 2010 4:42 PM

  • Graphing with logarithmic scale in AI5?

    I received a graph in MS Excel that uses a logarithmic (as opposed to linear) scale, but as far as I know, it isn't possible to create a scatter-plot graph with logarithmic scale in Illustrator. Does anyone know if there is a plug-in or a script that can do this?
    I am happy to upload the Excel file if that would be helpful. This is my first time using this forum, though, so I just need to know how to attach it.
    Thanks

    I found this link that has a plugin that states it does logarithmic scale, it is called ToolDemo here is the link, hope it's what you are looking for. http://www.telegraphics.com.au/sw/#tooldemo

  • Problem with logarithmic scale in combination chart

    Hi Experts,
    I have a combination chart where in primary axis i am showing column chart and in the secondary axis, i am showing line chart. Now as the range of values used in the column chart is big, I have to use logarithmic scale in primary axis. But if i do so, the line chart is also being affected. The markers for negetive values in the line chart plotted in secondary axis disappears if I apply logarithmic scale in primary axis.
    Is it a bug ?
    I am using Xcelsius 2008 SP3.
    Thanks and Regards

    Hi:
       Yes, I also noticed this problem, seems when you set primary axis as "Logarithmic", the secondary axis with negative value "<0" will be ignored as "0". I think it should be an issue.
       A quick work around here is, swith your primary axis and your secondary axis, when you set seconary axis as "Logarithmic", the negative values in primary axis will not be ignored.
    Hope it helps.

  • Line bar combo with logarithmic scale

    hi, I found that
    logarithmic scale is not supported for line bar combo.
    I have checked the checkbox "Use logarithmic scale" under "Tick Marks & Scale Type" under "Axis Scaling" for the left axis.
    but the charts (both checked and unchecked) are the same, there is no difference.
    And it is unable to check the checkbox "Use logarithmic scale" for the right axis.
    is it the limitation ?

    Hi,u use enterprise Edition???
    check this blog,really helpfull
    http://obiee101.blogspot.com/search/label/CHART
    hope i helped...
    http://greekoraclebi.blogspot.com/
    ///////////////////////////////////////

  • Activating then managing with a different ITunes

    hi there,
    I am due to receive my iphone today whilst at work. If I download a copy of itunes to my work computer to activate it, can I then go home tonight and sync with my home computer? I wouldn't want to to manage my iphone with my work computer, just activate it so i can make sure its working etc, but i don't want this to 'lock' my iphone into that copy of itunes.
    Can someone advise please?
    thanks

    That is not a problem.
    When you get home and connect to your computer, it will give you a warning that the iPhone is synced to another computer. You then have the option to sync to the new computer, which you should do.

  • Cashflow statement with out activating cash management

    Dear Friends,
    With out activating CASH MANAGEMENT how to get cash flow statement, please suggest me how to define and get cash flow statement with some example and transaction codes. In my project there is no cash management active. My client is asking me how to get cash flow statement

    Hi,
    Cash flow statement can be prepared using the report painter and linking the financial statement version to the same.
    In this case we need not ativate the cash management.
    Thanks,
    Shilpa.

  • Active Ingredient : Correction posting after MWBQ

    Hello All,
    We have active ingredient (purchasing scenario), now following data has been maintained :
    Material master :
      a) Batch Characteristic is linked.
      b) Proportion unit has been maintained : 100 kg = 70 KAI (i.e 70% potency)
      c) Split Valuation actiavted : X
      d) Price control : V (at header level ) but price control would be 'S' for valuation type level.(Price control at material master is S)
      e) Batch management activated.
      f) Inspection type 01 linked in QM view.
      g) MWB1 done to update standard cost 1 KAI = £ 100 (this is equal to £ 70 / kg)
    QM: Master Characteristic created and Material linked in the inspection plan.
    Now when I raise a Purchase order  for 1 KG and price 60 per KAI and do MIGO following happens :
    1. Batch is created and stock is QM restricted stock for inspection.
    2. Accounting entry posted :
       Stock A/c Dr .. 70 £ (At planned potency 70%)
       GR/IR A/c Cr .. 42 £ (At PO price for planned potency 70 %)
       PPV A/c Cr ...  28 £
    Then I do QA32 and put the result at 50% and do the Usage Decision, following happens :
    1. Stock is moved to Unrestricted
    2. Pop up comes up that ' Correct PO History for Inspection lot XXXX using MWBQ'.
    This is fine so far, now I do to MWBQ and do the correction, then I see Purchase order and material document posted.
    Material document is posted with movement type 141 and 142 , and accounting entry for correction is :
    GR/IR A/c Dr .. 42 £
    PPV A/c Cr ...  42 £
    GR/IR A/c Cr ...30 £
    PPV A/c Dr .... 30 £
    Why is stock account not getting corrected  ?
    I expected that initial entry done will be reversed completely and new stock entry would be posted. Because if I see material master for this batch ( valuation type ) it shows Total stock = 1 Value = £ 50 and Standard price updated = £ 50.
    But with this in GL Stock Account in FI still has £ 70 and not £ 50 ?
    Please help me understand what am I missing here .
    Best Regards
    Vijay

    Hi Vijay,
    did you actively search for accounting documents for the material or just look into the follow-on documents of the material document? It might be that the material price change was posted, but the connection to the original document is not given.
    Maybe check for all accounting documents and also for a price change document (transaction CKMPCD)
    Best regards,   Udo

  • Error in Interfacing Project Invoices to AR - No Active Project Manager

    I am getting an error while transferring a projects invoice to AR.
    I am running concurrent program 'PRC: Interface Invoices to Receivables' program from a responsibility that was created as per the client project security requirements.
    The output  gives an error message - 'No Active Project Manager Found'.
    Note:
    - The project manager is active on the project.
    - The person record of the project manager is active with an active HR assignment.
    - The project manager role is not end dated.
    When I run this same program from the standard Project Implementation Super User responsibility for the same project, the invoice gets interfaced to Receivables without any error.
    Why does this happen ?
    Is this concurrent program dependent on any menu / function / profile option ? If so, which one ?
    Regards,
    Prakash

    Hi Prakesh,
    Were you able to generate Invoice and AR Invoice Number in PJB?
    Try run Oracle Projects Invoice Data Collection Test n Oracle Projects (PA): Security Health Check
    check.
    Regards
    Raghavender K

  • Process flow - Active Directory integration with Enterprise Portal

    Hi
    I have seen number of documents/forum discussions on integrating Microsoft Active Directory (LDAP) with Enterprise Portal, but unable to find out the process flow for achieving the same.
    I have installed Enterprise Portal 6 (SP13) running on Web AS 640 (J2EE Standalone). The UME is currently configured to use Java database. (i.e datasourceconfiguration_database_only.xml)
    I intend to proceed as below for integrating with Active Directory and integrate with Windows authentication:
    1) Configure UME to use an LDAP Server as Data Source using Config Tool
    http://help.sap.com/saphelp_erp2004/helpdata/en/cc/cdd93f130f9115e10000000a155106/frameset.htm
    2) Configure Enterprise Portal UME i.e http://<host name>:50000/irj - System Administration - System Configuration - UM Configuration
    <b>Should I configure Data Sources & LDAP Server here as I have already configured these using J2EE Config tool (point no.1).</b>
    3) Integrate Windows authentication with EP using IISProxy module.
    I hope the above will enable me to logon to Portal without supplying username and password once you are logged on to the PC using your Windows user name and password.
    Also, any schema updates required to Activie Directory i.e What additional data is stored in A.D.
    I would appreciate your guidance on this.
    Thanks in advance,
    Chandu

    Hi Chandau,
    you wanted that some users are not taken into account by the User Management Engine (UME).
    This behavior can be established by specifying the
    ume.ldap.negative_user_filter property for the LDAP data sources in the data source configuration file. Using this property one can define that all users and accounts that
    match the defined conditions are filtered out by the UME API.
    A detailed documentation can be found in the SAP Online Help:
    http://help.sap.com/saphelp_nw04/helpdata/en/9a/f43541b9cc4c0de10000000a1550b0/
    content.htm
    In the following example of a data source configuration file for Microsoft Active Directory
    Server the attribute userPrincipalName is used as Logon ID of a portal user id (j_user).
    Here the user accounts that have one of the following Logon ID’s (index_service,
    notificator_service and cmadmin_service ) are filtered out.
    <dataSources>
    </dataSource>
    <dataSource id="CORP_LDAP">
    <privateSection>
    <ume.ldap.negative_user_filter>
    userPrincipalName=[index_service,notificator_service,cmadmin_service]
    </ume.ldap.negative_user_filter>
    </privateSection>
    </dataSource>
    </dataSources>

  • Active Directory Management Gateway Service installation error

    Hey,
    When I attempt to install the 32 bit Server 2008 package from http://www.microsoft.com/en-us/download/details.aspx?displaylang=en&id=2852 I get an error saying that it's not the correct version. Just in case I tried the 3 other versions, but as
    expected they give the same error. Any ideas?
    Thanks In Advance,

    Hi,
    Based on the description, we can try to contact Microsoft Customer Support Services to obtain the hotfix to see if it helps.
    A hotfix rollup package for Active Directory Web Service is available for the .NET Framework 3.5 SP1
    http://support.microsoft.com/kb/969166
    Besides, the following thread focused on the similar issue with ours and can be referred to for more information.
    Active Directory Management Gateway Service - install problem
    http://answers.microsoft.com/en-us/windows/forum/windows_other-windows_install/active-directory-management-gateway-service/d02c3ee7-ee4d-e011-8dfc-68b599b31bf5?tab=question&status=AllReplies
    Best regards,
    Frank Shen
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

  • Runtime Error due to activating Fund Management

    Hi,
    I had activated Funds Management in SAP. I started getting Run Time Errors. I deactivated the Fund Management. But still the Run Time Error is there. I am attaching the file for your reference.
    I enquired with the Basis consultant who is telling this is a Functional problem, hence I need to solve this. I checked all the configurations, but could not find the exact problem.
    Can anybody tell me how this can be resolved.
    Note: This error is showing in Quality Server. There was a copying from Production to Quality.

    In the error I see the statement before the dump comes is   PERFORM exit--entry_from_table                                                          | | 1039|        IN PROGRAM (-callback_report)     
    That sounds like an user exit from a table that is not there.
    You say you had a copy from production. It could be that a user exit which was not implemented yet in production and therefore not in the exit table. is now also not present anymore in your Q system after the copy. Were there any changes about to go to production ?
    Also in the dump I read the comment:
      | 1063|* version and guid are used by strategy -> further params for generated                     | | 1064|* routines. guid is only used for reference purposes and not returned at                    | | 1065|* the moment  
    That could possibly mean that this is a generated program. Maybe you need to regenerate it.
    I also see:  STEP--METHOD_DRULE
    That could mean that these have something to do with rules that have not been maintained.
    You could ask a programmer to debug the program and see where SAP tries to get the rules and exit information from (which table) .
    Maybe that give you a clue what is going wrong.
    If you have a table name start SM30 and click customizing. If it opens a customizing transaction then that is where you need to maintain entries.

  • Active ingredient and requirement quantity in COR6N

    Hello dears,
    I'm implementing the usage of ative ingredient unit of measure for batch management.
    I set up customizing point for "Define Calculation of Proportion Quantity from Base Quantity" and "Define Calculation of Product Quantity from Base Quantity", then I added a characteristic to the batch class and added the same to the material master. Everything is working fine, the system can convert the quantity in the GAI unit of measure in MMBE transaction, and in COR1/COR2 I can allocate the batch according to the active ingredient UoM.
    The problem will happen when I am in COR6N - Goods movements tab to perform the goods issue: here, in tabs "Requirement quantity" and "Quantity withdrawn", the quantity is not calculated correctly according to the anctive %: eg, the value in the batch is 0,80 but in COR6N the system use 0,84.
    So I have two questions:
    - do you know why the system has this behaviour? Did it happen to anyone?
    - is there any customizing behing the determination of those fields? Because in two different client system I'm having different behaviour: in one case (the system where we execute customizing) I have only the issue I said above; in the second case (the system where the customizing is copied to) the behaviour is completely different: the quantity shown in Requirement qty field is the opposite, as if the system is using 1,20 instead of 0,80
    Thanks a lot in advance for your advice.
    Giovanni

    Hello,
    Have you solved the issue?
    thanks,
    Siddu

  • Active Ingredient proforma Invoice

    Dear Gurus
    I am using the Active ingredient material and have the unit conversion between Sales UOM and base UOM appearing in sales order condition tab. However when I create a Order related proforma invoice , conversion rate is not populated in billing condition tab. It does populate with Delivery related proforma Invoice.
    Not sure what is happening.
    Regards,
    Neeraj Srivastava
    Edited by: neeraj.srivastava15 on Aug 30, 2010 11:41 AM

    Hi Rao,
    Check the item category configuration via VOV7 for the item category being used in the delivery. The billing relevance should be set to A.
    It should help you
    Regards,
    Pls Reward points if it helps

Maybe you are looking for