Active Ingredient Management

Hi SAP experts.
We want to activate Active Ingredient Management.
But before moving further, would like to know:
1  What processes are affected after activation (Ingredient Managementis necessary only for some materials)? For, example
* there will be fields obligatory for filling
* it will be necessary to create additional objects or documents in system
* etc.
i.e. how strong the current business processes will be affected
2. The content of ingredient in each new delivery a miscellaneous, but receiption to do only in one batch. The amount of ingredient will be an average? Issue will be average amount of ingredient?
For example.
* 101 movement type: 
2 pieces contain 200 grams of ingredient (1 = 100)
1 piece contains 130 grams of ingredient
therefore
in system 1 piece  will contain 110 grams?
* 261 movement type
2 will contain 220grams of ingredient?
Thanks for answers.

Hi,
In Bom you are bom qty is 10 Kai that time system do not know what are the result for batches avalable.
If you keep 10 KG in BOM then if you determine material of 90.00 % then in that case avtual potency you will get it 9 KAI only..
So when you determine the batches in process order it will pick qty in KG by converting in result.
If you are same problem again then check again your MIC for which class charecteristic attached.also see in MIC reference charecteristic on.
Boss I am using this concept regularly in my project its running fine.
So please revert me back.
Regards
SANIL
One more setting in QS61 select your materail & ente. .Where you can see all charecteristics assign in class which is used in your material.master.In this screen select all charecteristic line item except your potency.charecteristic ,delte all selected line item
Now with only your desire charecteristic potency save the screen.
Here actually you are assigning class charecteristic to material.
Regards
SANIL
Edited by: Sanil Vadke on Apr 15, 2010 4:42 PM

Similar Messages

  • Active Ingredient management error in valuation

    Dear gurus,
    We have a business process involving active ingredient management system, the process is as follows.
    1, PO creation
    2, GR against PO with automatic batch creation in Migo (with out entering characteristics)
    3, Material After tested the characteristic values for the batch are updated in MSC2N.
    4, MIRO for PO
    Now my problem is lets say i have maintained in Proportion/Product Unit tab "Plan value " for a characteristic as 95.
    We have batch wise split valuation and payment processed according to this batch. In PO we have maintained a OPU same as that of the characteristic.
    Since we are not maintaining any characteristic value in GRN the Qty in PO price unit in MIgo doc is updated according to the Plan value in material master which makes MIRO value to calculate wrongly.
    Please advice to solve this issue
    Regards

    Hai,
    The problem is if i enter the Characteristic value in migo then all the calculations are coming correct. But our business process requires to enter the characteristic value in MSC2N because of which calculations are incorrect.
    Regards

  • Active Ingredient Management with Logarithmic Scale

    Dear Gurus,
    I would like to manage the batch specific concentration of an active ingredient that is measured on a log scale.  This is similar to pH, but the active ingredient I would like to manage is a virus particle.
    Any guidance would be appreciated,
    MediSteve

    Dear MediSteve
    You could use the Characteristics
    Characteristics are criteria according to which you can search for batches. These characteristics are defined when creating a class. There are two different types of characteristic:
    User-defined characteristics :
    These are characteristics which are not defined as fields in the batch master record.
    For example: Active ingredient potency, viscosity, color, weight
    please look here:
    http://help.sap.com/saphelp_47x200/helpdata/en/4d/2b8bd043ad11d189410000e829fbbd/frameset.htm
    good luck.

  • Active Ingredient : Correction posting after MWBQ

    Hello All,
    We have active ingredient (purchasing scenario), now following data has been maintained :
    Material master :
      a) Batch Characteristic is linked.
      b) Proportion unit has been maintained : 100 kg = 70 KAI (i.e 70% potency)
      c) Split Valuation actiavted : X
      d) Price control : V (at header level ) but price control would be 'S' for valuation type level.(Price control at material master is S)
      e) Batch management activated.
      f) Inspection type 01 linked in QM view.
      g) MWB1 done to update standard cost 1 KAI = £ 100 (this is equal to £ 70 / kg)
    QM: Master Characteristic created and Material linked in the inspection plan.
    Now when I raise a Purchase order  for 1 KG and price 60 per KAI and do MIGO following happens :
    1. Batch is created and stock is QM restricted stock for inspection.
    2. Accounting entry posted :
       Stock A/c Dr .. 70 £ (At planned potency 70%)
       GR/IR A/c Cr .. 42 £ (At PO price for planned potency 70 %)
       PPV A/c Cr ...  28 £
    Then I do QA32 and put the result at 50% and do the Usage Decision, following happens :
    1. Stock is moved to Unrestricted
    2. Pop up comes up that ' Correct PO History for Inspection lot XXXX using MWBQ'.
    This is fine so far, now I do to MWBQ and do the correction, then I see Purchase order and material document posted.
    Material document is posted with movement type 141 and 142 , and accounting entry for correction is :
    GR/IR A/c Dr .. 42 £
    PPV A/c Cr ...  42 £
    GR/IR A/c Cr ...30 £
    PPV A/c Dr .... 30 £
    Why is stock account not getting corrected  ?
    I expected that initial entry done will be reversed completely and new stock entry would be posted. Because if I see material master for this batch ( valuation type ) it shows Total stock = 1 Value = £ 50 and Standard price updated = £ 50.
    But with this in GL Stock Account in FI still has £ 70 and not £ 50 ?
    Please help me understand what am I missing here .
    Best Regards
    Vijay

    Hi Vijay,
    did you actively search for accounting documents for the material or just look into the follow-on documents of the material document? It might be that the material price change was posted, but the connection to the original document is not given.
    Maybe check for all accounting documents and also for a price change document (transaction CKMPCD)
    Best regards,   Udo

  • Active ingredient and requirement quantity in COR6N

    Hello dears,
    I'm implementing the usage of ative ingredient unit of measure for batch management.
    I set up customizing point for "Define Calculation of Proportion Quantity from Base Quantity" and "Define Calculation of Product Quantity from Base Quantity", then I added a characteristic to the batch class and added the same to the material master. Everything is working fine, the system can convert the quantity in the GAI unit of measure in MMBE transaction, and in COR1/COR2 I can allocate the batch according to the active ingredient UoM.
    The problem will happen when I am in COR6N - Goods movements tab to perform the goods issue: here, in tabs "Requirement quantity" and "Quantity withdrawn", the quantity is not calculated correctly according to the anctive %: eg, the value in the batch is 0,80 but in COR6N the system use 0,84.
    So I have two questions:
    - do you know why the system has this behaviour? Did it happen to anyone?
    - is there any customizing behing the determination of those fields? Because in two different client system I'm having different behaviour: in one case (the system where we execute customizing) I have only the issue I said above; in the second case (the system where the customizing is copied to) the behaviour is completely different: the quantity shown in Requirement qty field is the opposite, as if the system is using 1,20 instead of 0,80
    Thanks a lot in advance for your advice.
    Giovanni

    Hello,
    Have you solved the issue?
    thanks,
    Siddu

  • Error in Interfacing Project Invoices to AR - No Active Project Manager

    I am getting an error while transferring a projects invoice to AR.
    I am running concurrent program 'PRC: Interface Invoices to Receivables' program from a responsibility that was created as per the client project security requirements.
    The output  gives an error message - 'No Active Project Manager Found'.
    Note:
    - The project manager is active on the project.
    - The person record of the project manager is active with an active HR assignment.
    - The project manager role is not end dated.
    When I run this same program from the standard Project Implementation Super User responsibility for the same project, the invoice gets interfaced to Receivables without any error.
    Why does this happen ?
    Is this concurrent program dependent on any menu / function / profile option ? If so, which one ?
    Regards,
    Prakash

    Hi Prakesh,
    Were you able to generate Invoice and AR Invoice Number in PJB?
    Try run Oracle Projects Invoice Data Collection Test n Oracle Projects (PA): Security Health Check
    check.
    Regards
    Raghavender K

  • Cashflow statement with out activating cash management

    Dear Friends,
    With out activating CASH MANAGEMENT how to get cash flow statement, please suggest me how to define and get cash flow statement with some example and transaction codes. In my project there is no cash management active. My client is asking me how to get cash flow statement

    Hi,
    Cash flow statement can be prepared using the report painter and linking the financial statement version to the same.
    In this case we need not ativate the cash management.
    Thanks,
    Shilpa.

  • Need Active Ingredient  table field & its calculation from batch chars

    Hi All,
    Creating a report where Active Ingredient(AI) table field is needed. Further per batch AI content need to be determined based on AI characteristics in batch & planned value of AI in material master for a material. Please help me in finding out the table & its field for AI uom & value of AI chars in batch & in material master. I checked in table "AUSP" but value of AI is coming as blank in this table.
    Thanks in advance,
    Regards
    Jack

    Thanks for your reply. But these tables are not helpful.
    Regards,
    Jack

  • Active Directory Management Gateway Service installation error

    Hey,
    When I attempt to install the 32 bit Server 2008 package from http://www.microsoft.com/en-us/download/details.aspx?displaylang=en&id=2852 I get an error saying that it's not the correct version. Just in case I tried the 3 other versions, but as
    expected they give the same error. Any ideas?
    Thanks In Advance,

    Hi,
    Based on the description, we can try to contact Microsoft Customer Support Services to obtain the hotfix to see if it helps.
    A hotfix rollup package for Active Directory Web Service is available for the .NET Framework 3.5 SP1
    http://support.microsoft.com/kb/969166
    Besides, the following thread focused on the similar issue with ours and can be referred to for more information.
    Active Directory Management Gateway Service - install problem
    http://answers.microsoft.com/en-us/windows/forum/windows_other-windows_install/active-directory-management-gateway-service/d02c3ee7-ee4d-e011-8dfc-68b599b31bf5?tab=question&status=AllReplies
    Best regards,
    Frank Shen
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

  • Runtime Error due to activating Fund Management

    Hi,
    I had activated Funds Management in SAP. I started getting Run Time Errors. I deactivated the Fund Management. But still the Run Time Error is there. I am attaching the file for your reference.
    I enquired with the Basis consultant who is telling this is a Functional problem, hence I need to solve this. I checked all the configurations, but could not find the exact problem.
    Can anybody tell me how this can be resolved.
    Note: This error is showing in Quality Server. There was a copying from Production to Quality.

    In the error I see the statement before the dump comes is   PERFORM exit--entry_from_table                                                          | | 1039|        IN PROGRAM (-callback_report)     
    That sounds like an user exit from a table that is not there.
    You say you had a copy from production. It could be that a user exit which was not implemented yet in production and therefore not in the exit table. is now also not present anymore in your Q system after the copy. Were there any changes about to go to production ?
    Also in the dump I read the comment:
      | 1063|* version and guid are used by strategy -> further params for generated                     | | 1064|* routines. guid is only used for reference purposes and not returned at                    | | 1065|* the moment  
    That could possibly mean that this is a generated program. Maybe you need to regenerate it.
    I also see:  STEP--METHOD_DRULE
    That could mean that these have something to do with rules that have not been maintained.
    You could ask a programmer to debug the program and see where SAP tries to get the rules and exit information from (which table) .
    Maybe that give you a clue what is going wrong.
    If you have a table name start SM30 and click customizing. If it opens a customizing transaction then that is where you need to maintain entries.

  • Active Session Management adds space border around Template

    Hi,  Does anyone know why flagging the template attribute "Active Session Mgmnt" adds a border around the template?  We designed our dashboard to exactly fit into 1024X768 and when we added active session management it is adding a border of space around our template when presented in the web...
    Any ideas?  Thanks!

    Hi Kenneth,
    take a look into the source and you will see, that the webpage has been inserted into a html-frame.
    Managing the pages in frames is necessary releasing the connections to the server, since if you leaves the page b.e via link a JavaScript-Call is been processed.
    If you want to omit these handling, but you want to use the functionality of the resource-release-management, copy the JavaScript-Function into yur source, switch off the "Active Session Management" and try calling the function by an onunload in the <body>-tag....
    ... or (more simple) switch off displaying the frames in the IE.
        Ralf

  • Active Ingredient proforma Invoice

    Dear Gurus
    I am using the Active ingredient material and have the unit conversion between Sales UOM and base UOM appearing in sales order condition tab. However when I create a Order related proforma invoice , conversion rate is not populated in billing condition tab. It does populate with Delivery related proforma Invoice.
    Not sure what is happening.
    Regards,
    Neeraj Srivastava
    Edited by: neeraj.srivastava15 on Aug 30, 2010 11:41 AM

    Hi Rao,
    Check the item category configuration via VOV7 for the item category being used in the delivery. The billing relevance should be set to A.
    It should help you
    Regards,
    Pls Reward points if it helps

  • Implement Activity Based Management

    I am currently working with a client that wants to implement Activity Based Management. I am looking for any information on how to approach this type of implementation within the Oracle eBusiness Suite. The client is currently running OTL, HRMS, Projects, GL, PO, AP, AR. I am currently researching the ability to do this with OTL and Projects. Has implemented the Activity Based Management Module?

    Just wondering if you have got any info to share from your research. I have a similar predicament. I am trying to retrieve timesheet details of ex-employees from OTL. Tried to link hxc_time_building_blocks, hxc_time_attribute_usages, hxc_timecard_summay, hxc_time_attributes, pa_project_assignment, pa_resources_denorm, pa_project_subteams, pa_project_subteam_parties, per_people_f etc.
    But in vain. Do you have inputs on how the self service timecard inquiry retrieves the timecard details of active current employees. I believe it is dynamically populated via some APIs. Any thoughts shared is highly appreciated.
    Thanks
    uds

  • Again - Active Directory Management Pack - AD MP - SCOM 2012R2 - AD 2012R2 - Action / RunAs Account permissions

    Hi,
    after reading many Posts and Blogs i came to the conclusion that it is still unclear to me what is needed to Monitor Active Directory successfully and what is the securest way configuring the RunAs or Action Account. I hope the experts here can make a clear
    Statement to answer the question for all time ;-)
    1. Action Account:
    Here is described what permissions and rights are needed to use a low-privileged account:
    https://technet.microsoft.com/en-us/library/hh212808.aspx
    Now you might say: that was asked and answered so many times..you are right, but the answer was from run as "local System" to "you Need local admin". So also the AD MP documentation still says you Need a local Admin account.
    here are other references which says you Need local admin rights:
    http://micloud.azurewebsites.net//2014/02/26/scom-agent-grayed-out-when-trying-to-monitor-domain-controllers/
    Even Kevin Holman says here
    https://social.technet.microsoft.com/Forums/systemcenter/en-US/2a0e5a2b-a3d9-42d4-8474-9f690007caa0/opsmgrlatency-cn-gets-auto-created-in-domain-not-configuration:
    "Basically - if your domain controllers are running as local system default agent action account, in most cases you will not need to ever set up any replication monitoring run-as accounts.... as local system on a DC has all the rights necessary. 
    (in most cases).
    "Simple questions: Is this really enought to Monitor every aspect of an ActiveDirectory Domain and Domain Controller using a low privilege account the the permissions in the article? Or is using local System better? Is there a difference when
    using SCOM2012R2 with the new Agent? Most documentation referes to SCOM2007(except the replication Monitoring where it is clear that other permissions are needed:
    http://blogs.technet.com/b/jimmyharper/archive/2009/05/20/configuring-or-disabling-replication-monitoring-in-the-active-directory-management-pack.aspx )

    The MP guide is not really clear about it. The only thing they are clear about is whenever you want to use client monitoring. In those situations low privileged will not work.
    For each of the client-side monitoring scripts to run successfully, the
    Action Account must be a member of the Administrators group on both the computer
    on which the client management pack is running and the domain controller that is being monitored. The
    Action Account must also be a member of the
    Operations Manager Administrators group, which is configured through the Operations console in so that all the scripts that are configured on the Root Management Server can run properly
    Both a local system and domain admin are a risk. If someone loads a malicious management pack that makes changes to the AD services you are screwed. The local system has unrestricted access to local resources including domain services.
    The only reason I don't want a domain admin account in SCOM is that you have an additional layer where the password potentially could be retrieved. That's not the case with a local system account. But the risks are the same.
    See: https://msdn.microsoft.com/en-us/library/ms677973%28v=vs.85%29.aspx
    But this not an answer to your question. :-)

  • PP-PI active ingrediant settlement

    In PP-PI We want to use active ingredient for scenario:
    Our Raw material is MINING ORE which will have varying proportion of COPPER & COBALT.
    Valuation of ORE is based on itu2019s content of COPPER & COBALT content. So we will use active ingredient to capture value of this raw material based on it content of CU & CO.
    Now when we issue this material for production to process order, our semi finished output ( Say SFG1) will also have varying content of COPPER & COBALT based on kind of input quality. There will several process orders doing diff. processe.
    Now my query is
    1) Can we settle the process order variance to COPPER & COBALT content of SFG1 instead of normal settlement to SFG1?
    2) Can I maintain my valuation of SFG1 based on COPPER & COBALT content?
    3) Do we have any user exit or BADI available to replace SFG1 with CO& CU in process order settlement rule?
    4) In standard cost estimate can we capture COPPER & COBALT characteristics?
    Ultimately COPPER & COBALT are our finished goods.
    I try to search sap help but not much info to help me on this.
    Your input will be highly appreciated.
    Nitesh

    Dear experts,
    Any inputs on my posting?
    I analysed further and now feel that selttlement to this CO& CU will not be possible.
    But can any one guide if I my SFG1 has charectristic CO & CU can I get valuation of SFG1 on CO& CU content basis?
    Pl. give ur openions.
    Nitesh
    I can enter CO & CU content in SFG1 only after quality testing and I want valuation of SFG1 based on this quality test only.
    Edited by: NITESH PATEL on Sep 11, 2008 4:32 PM

Maybe you are looking for

  • Error while creating a sales order BAPI_SALESORDER_CREATEFROMDAT2

    Hi All, I am using the BAPI BAPI_SALESORDER_CREATEFROMDAT2 to create a sales order. I am passing all the required fields and also the rejection code at the item level. Also I am using a variant configuration material and hence ai am filling the VC co

  • RFFOEDI1 Smartform - F110

    Hi experts, I have a pay program : F110 with ID: G0314 and pay form = N. I have to execute the program and show an smartform with a list of customers. Now, the print program is : RFFOEDI1. What I have to do? I have to reprogram RFFOEDI7 to show with

  • Obsolete images making my upload file huge?

    I just added the same picture to the browser background of all my site's pages (11 in all). Now when I use iWeb to save my site to a folder for uploading to my non .mac hosting site, it has more than doubled in size from 9.8 MB to 21.5 MB. I looked a

  • R14 Default Value on a Picklist

    on the lead object I have a custom picklist that contains units of measure such as lbs, kg, etc. On the user object I also have a custom picklist that contains the users preference for unit of measure. When a new lead is entered by a user I would lik

  • Can Ideas Open A .pdf File?

    Says what it does on the tin - can Ideas open an illustrator .ai or .pdf or .eps file and edit it? Thanks, Peter