Active Users Request is still running for hours in Release 12

Hi Friends,
Today I have installed the Release 12 in the Red Hat AS 4.0. Installation was successfull.
All the Concurrent Managers are up and running.
I have run some requests in the Paybles, Receivable..
Requests are running for hours..all are standard reports...
even
Active Users Request is running for hours..there is no end...
Friends...
How to trouble shoot it???????????
Please give me advice...
Regards,
Subbu

Hi,
Thanks for the reply......
Is this a fresh installation? If so, what version? Which OS?
Ans: Yes This is a fresh installation...After InstallationAll concurrent Managers are up and running...
Was this working properly before? If so, what modifications have you done?
Ans: As this is a fresh installation. This is first time to run the requests. After installation, when i run the requests, I got error like libmawt.so is not opened. I have given libmawt.so file path in the LD_LIBRARY_PATH. After setting libmawt.so in the LD_LIBRARY_PATH. this time I did not before error. but request is running for hours..there is no end.
Have you tried to recover the CM from OAM?
Ans: ya, I tried, but not helpful.
Tracing should be helpful, did you try to run CM Diagnostics test?
If you shutdown the CM and submit the request, what do you get?
Ans: I got status as Inactive and no manager
This is the error in the my manager log file
Routine AFPCMT encountered an ORACLE error. ORA-01012: not logged on.
Review your error messages for the cause of the error. (=<POINTER>)
_ 2 _
Routine AFPCSQ encountered an ORACLE error. ORA-01005: null password
given; logon denied
I tried to relink FND executables using adadmin. But it did not sovle out my problem. As this is solution in metalink for above error.
My Version is : Release 12 on Red Hat AS 4.0
Regards,
Subbu

Similar Messages

Error occuring when submitting Active Users request in R12 on Solaris 5.10

Hi,
For a cloned environment, while submitting the active Users request it is completing with error. Below is the log file. Please help
+-----------------------------
| Starting concurrent program execution...
+-----------------------------
APPLLCSP Environment Variable set to :
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
American_America.UTF8
There was an error trying to initialize the HPI library.
Please check your installation, HotSpot does not work correctly
when installed in the JDK 1.2 Solaris Production Release, or
with any JDK 1.1.x release.
Error occurred during initialization of VM
Signal chaining not allowed for VM interrupt signal, try -XX:+UseAltSigs.
Program exited with status 1
Concurrent Manager encountered an error while running Oracle*Report for your concurrent request 720610.
Review your concurrent request log and/or report output file for more detailed information.
Thanks,
Anand

Hi Anand;
Please check below metalink note:
There Was An Error Trying To Initialize The Hpi Library When Running Any Concurrent Reports [ID 836237.1]
Regard
Helios

Active users request taking too much time

Hello,
every time i run "active users" request it take about 40 minutes and errored out the following
X connection to aixtst01:1.0 broken (explicit kill or server shutdown).
any idea?

Sounds like you've switched the output of Active Users from Text to PDF or Postscript... an your X Server is not working. Try changing the output back to Text on the Concurrent Program Definition for Active Users. Or get your X Server up and running.
Gareth
http://garethroberts.blogspot.com

I keep getting window up saying urgent update recommending download, but when i do try, all i get is a blue and white bar moving . i have left it run for hours and nothing happens. what is it?

i downloaded new FF 2 weeks ago. Since then i keep getting update window coming up every day highly recommending i update but when i try, nothing happens except blue/white moving bar at top of window. i have left it run for hours and no progress, so i close it. The next time I open FF, it appears again and again same happens.
If there is an urgent update, how urgent is it if I cannot download it.It's worries me that i can,t load it and how it might affect my security.

It would be a great idea to uninstall Norton - you don't need it and it has a pretty poor reputation for mucking up otherwise healthy Macs.
Have a look at this User Tip from klaus1: https://discussions.apple.com/docs/DOC-2435
To uninstall Norton:
https://support.norton.com/sp/en/us/home/current/solutions/kb20080427024142EN_En dUserProfile_en_us
Edit: To see whether you actually have Norton installed launch Activity Monitor in the Utilities folder. If it's installed you'll likely see some Norton entries there.
Also, in System Preferences>Users & Groups or Accounts, depending on OS)>Login Items, it might be listed.

Strange Character in "Active Users" request !

I have just finished installation of a fresh TEST oracle applications instance.
Version: 11.5.10.2 Platform: Oracle Linux.
I logged in and run the Active Users request and got the correct output but with "MUSIC" character scattered here and there !! I tried some other requests and got the same problem !!
Have you ever come across such an issue !?
Please advise
Firas

What type of reports you are trying to run? Text or Bitmap reports?I use TEXT format
What is the characterset of the Applications/Database? AR8ISO8859P6
Did you try to download the output files from the server and open it using
notepad/wordpad/IE at the local host (in case the issue is with the Text reports)? ?>> Would you please try this and check if you get such characters or not. Yes. I have just tried. They are OK and the problem doesn't appear here.!
Thanks a lot. Please advise
Firas

With iTunes 10 and iOS 5 synchronizing my iPhone (3GS) via USA and Wifi does not stop in the last step. Runs for hours. iPad Synchronization is fine. Any ideas to solve it?

With iTunes 10 and iOS 5 synchronizing my iPhone (3GS) via USA and Wifi does not stop in the last step. Runs for hours. Even canceling takes forever.
iPad2 sync is fine.
Any ideas to solve it?

This sounds like a problem you should take up with Apple Customer Support.
The other users like yourself here are not going to be able to help you with this problem.
Allan

I am using Vodafone at Delhi India with my Iphone 5S, 3g is activated with my number but i am not getting 3G signals iphone is also activated with vodafone but still waiting for 3G signals contacted vodafone but wasted my time pls help using APN www

I am using Vodafone at Delhi India with my Iphone 5S, 3g is activated with my number but i am not getting 3G signals iphone is also activated with vodafone but still waiting for 3G signals contacted vodafone but wasted my time pls help using APN www

Keep on talking to Vodafone and keep pestering them until you get a satisfactory answer. Whether you get a 3G signal or not, is entirely the responsibility of Vodafone India because they are your carrier/phone company and nobody here can help you with that on a public user to user technical support forum.
Contact Vodafone as they are the only ones who can help you.

Discoverer report running for hours

Hi,
One of the custom discoverer report (based on custom SQL) is running for hours.
When U ran the query for the respective folder, the results were returned in few seconds.
Hence, data size is not an issue. How can I identify the cause and solve it?
Thanks,
Kamath.

Hello
If you dont need to run the report urgently then you can always schedule it to run the background till it is finished.
First log into desktop. Select tools > options > query governor tab. Make sure only radio button named "Never" is ticked. Leave all other options empty / not ticked. Click OK when ur done.
Then go to File > Manage Workbooks > Scheduling Manager > Schedule.... button then choose either My Computer or Database depending on where your report is stored. Scroll down and find your report. Enter a time and date that you want to start running the report. When you are done click Finish button. Normally the report would run for an hour or till it is complete. But it won't bomb out.
After 2 hours or even the next morning go to File > Manage workbooks > then look for your report > if it has run successfully then the status column would return something positive like "completed successfully". just double click your report and your are done....
It works for me if i need to run one of my reports. but that is only if your not in a rush to run your report
Hope it helps
Edited by: iandekoker on Jun 11, 2009 12:48 PM
Edited by: iandekoker on Jun 11, 2009 12:49 PM

Recently, after cancelling the tick of a song, which is the next song after the one I am listening, in the song list, the canceled song will still run for the next song. I remember that it used not to happen like this. How can I solve this problem?

Recently, after cancelling the tick of a song, which is the next song after the one I am listening, in the song list, the canceled song will still run for the next song. I remember that it used not to happen like this. How can I solve this problem?

This looks like a change of behaviour in iTunes 12. Once songs are queued up to the Up Next list then they play whether ticked or not. If you want to skip certain songs already queued click the Up Next tool, then click the small X to the left of the song that appears when you hover over it.
tt2

EPM System Configurator runs for hours

Hi experts.
Have you ever experienced that your EPM system configurator runs for hours?
I have an 11.1.2.1 installation, and a few months ago, I applied a Reporting & Analysis patch which requires a redeploy of FR, framework and web analysis.
The redeployment took more than 1 hour 20 minutes when it usually takes around 10 minutes.
( Dec 18, 2012 12:24:15 PM ): ---- Hyperion Foundation Configuration......
( Dec 18, 2012 12:24:15 PM ): Pass [00 min 31 sec] [PRE] Pre-Configuration Total time passed: 00 min 31 sec
( Dec 18, 2012 12:24:26 PM ): ---- Reporting and Analysis Configuration......
( Dec 18, 2012 12:24:27 PM ): Pass [00 min 11 sec] [PRE] Pre-Configuration Total time passed: 00 min 11 sec
( Dec 18, 2012 12:24:37 PM ): ---- Financial Reporting Configuration......
( Dec 18, 2012 12:24:38 PM ): Pass [00 min 11 sec] [PRE] Pre-Configuration Total time passed: 00 min 11 sec
( Dec 18, 2012 1:46:28 PM ): ---- Reporting and Analysis Configuration......
( Dec 18, 2012 1:46:28 PM ): Pass [01 h 21 min 50 sec] [APP] Deploy to Application Server
( Dec 18, 2012 1:46:28 PM ): Pass [00 min 00 sec] [APP] Deploy to Application Server Total time passed: 01 h 21 min 50 sec
( Dec 18, 2012 1:46:28 PM ): ---- Financial Reporting Configuration......
( Dec 18, 2012 1:46:28 PM ): Pass [00 min 00 sec] [APP] Deploy to Application Server Total config time: 01 h 22 min 47 sec
I checked the CPU and memory log at the time of the deployment, things seem to be normal.
Since i will be applying another patch on Reporting & Analysis soon, I am preparing the work plan and rundowns and I am trying to estimate how much time I need to do this patch.
Any advice would be appreciated.
I did some researches on my own and found out some article saying the following:
http://www.oracle.com/technetwork/middleware/bi-foundation/epm-tips-issues-73-up-399995.pdf
On page 103, it says something about the cluster or IPv6 problem. I don't think the IPv6 is our problem, and I couldn't find the log inside of my configtool log.
Thank you.

If it only happened once and then all the other occasions it was fine then what is to say it will happen again? I am not sure how easily you are going to find your answer to why it happened on that occasion, I know I was deploying a web application the other day and it took 30 mins when it should only take a few but this was on a shared vm infrastructure which could have been the cause.
Cheers
John
http://john-goodwin.blogspot.com/

Repair Permissions runs for hours

Following an update from Mavericks to Yosemite 10.10, I find that when I use the Disk Utility to repair permissions, it runs for hours, seemingly repairing every one of the 680,000 files on the iMac. If I reboot, and repair permissions again, it begins the same long process all over again. Should I re-install Yosemite from an online source?

Does the last line of output say that permission repair completed successfully? If so, what you see is normal. Repairing permissions is a waste of time and always produces reams of meaningless warnings.

Assembly running for hours

Hi All,
We are facing a peculiar problem here.We had some activities(that were checked in,activated and released)which were to be transported using NWDI.We did an "Import" in the Consolidation tab,and the activities moved into the Assembly tab.
We did an "Assemble Components" then and while the activities were getting assembled(Status was shown as "Assembly Running"),there was a problem with the server and it had to be rebooted.
Even after the reboot,the activities showed the status as "Assembly Running".The activites have been running for many hours now.We tried restarting the server again but find the assembly still running.
We found the following error log[in http://<hostname>:port/nwa link] on the server:
User Guest, IP address HTTP request processing failed. HTTP error [401] will be returned. The error is [Cannot authenticate the user.No details available].
And the following warning message:
Caught java.net.ConnectException: A remote host refused an attempted connect operation.
at java.net.PlainSocketImpl.socketConnect(Native Method)
at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:336)... [see details]
Kindly help us with the solution.
Thanks in advance.
Regards,
Shalini

Hi Shalini,
if the server was rebooted during assembly the assembly is not really running anymore. Usually it is just the CMS WebUI that still hangs in that state.
There should be a "Reset" button in the assembly pane where you reset and then restart assembly.
Regards,
Marc

MRP Run for Hourly basis in MD61 Transaction

Hi All,
I want to Run MRP for Hourly basis in MD61 Transaction
If the user selects the Planning period as Hourly then in the next screen for Table Tab , 24 columns should be appear.
Please give the solution.
Thanks
Ulhas

Dear Vijesh,
according to scenario described , the correct strategy to use il strategy 40 as corretly suggest also kiran.
After create planning forecast through MD61 you can create immediately active you plan and after the system also before to run MRP planning will see the requirmenet ( Pir ) and it will work according to new sales order.
Sales order are going to reduce Planned indipendent requirement until to arrive zero quantity in MD04 (situation in with will there are only sales orders).
This information is avalible to standard SAP also in tcode MD73 but only with limited selection (qty assign)
You can use also Fm to read MRP situation in order to have a control report so that to monitorig the % of sales order and the planned indipendent requirement.
Let me know if i have been useful for you..
Daniele

IMac Harware Test runs for hours, repairpermission too

My iMac G5 started having failures last year already. So I first ran Disk Warrior and everything turned out well for a while. But now, the system started showing the endless rotating whell when booting, and I could not do an Archive and Install. So I diagnosed a HD failure and bought a new HD.
I reinstalled everything via Carbon Copy Cloner and did and Archive and Install. But obviously the permissions were wrong and Disk Util took ages trying to repait them. So I decided to boot in Single User Mode and tried to run Applejack wich also seemed to step on the spot after finding some "bad Alloc[157]...etc". So I threw in Apple Hardwae Test and ran a full checkup and as it turns out, it gets stuck when checking the RAM, so I stopped it after 1 hour.
Does anybody have a clue of what might be wrong? How shall I determine what is rong when Hardware Test stops in the middle? Is it the RAM? How should I find out?
mat

Hello,
You re absolutely right. I did too many things at the
same time.
Yes, repairs and trouble-shooting need to be done systematically. And, it needs to be done with tools appropriate to the task.
Using one tool to do this, and then another tool to fix the first tools mistakes, and then jumping to another one just doesn't work well.
I finally reinstalled the system and tomorrow, while
I'm at work,
Yes, that will be the way to go.
You should consider that while you are at work, the system will be sitting there completed. So, if your fans run full speed while in the diagnostic test (I cannot remember for sure if they did or not on my system), then they will continue to do so until you come back.
I don't know if I'd leave the computer there for 8 hours with fans at full speed and the screen unmoving on maximum brightness. That just doesn't sound ideal to me.
I think perhaps I'd demonstrate exactly what you want done to your wife (or someone else if someone else is home), and request them to do that for you to get the machine up and running for you about 2 and a half hours before you get home.
I'll have Hardware Test running at home.
I was just quite exasperated because Hardware Test
said it would take about 15 Min, so after an hour, I
thought it was stuck.
That's understandable.
I promise to be a goob boy now and stop thinking my
Mac was a box of Lego where I can unbuild and rebuild
everything like I please.
Yes. Computers don't like that
Let us know how it works out.

The User profile synchronization Full , runs for 1 second successfully

Hi!
On our sharepoint 2013 farm we can run the user profile incremental synchronzation timer job without issues, it runs for about 2-3 min.
However when trying to run a Full import, we observe that the full user profile synchhronization job only runs for a second and is finished. There must be something wrong..
The user profile service and synchronzation service are up and running. The connections to Active directory are present and working (incremental synchronization works).
Have anyone experienced this?
brgs
Bjorn

Hello Bjorn,
You should not run Full incremental until anything on UPA is broken. It should be only ran in case of disaster and recovery.
Thank You, Pallav S. Srivastav ----- If this helped you resolve your issue, please mark it Answered.

Active Users Request is still running for hours in Release 12

Similar Messages

Maybe you are looking for