Active vs. Inactive Transformations

HI,
Just wondering the reason for inactive transformations (white ribbon)?  Why would you have inactive transformations?  Do inactive transformations get executed, or only active transformations?  Also, I'm seeing an inactive transformation based on a data source that no longer exists.  Why would someone keep this as part of the data structure in RSA1?
Thanks,
Kevin

Hello,
Just wondering the reason for inactive transformations (white ribbon)? Why would you have inactive transformations? Do inactive transformations get executed, or only active transformations? Also, I'm seeing an inactive transformation based on a data source that no longer exists. Why would someone keep this as part of the data structure in RSA1?
1. Inactive Transformations:
     There are many reasons, to have inactive transformations -
     If the target infoProvider (either DSO, InfoCube or master data attr , text) has been changed, meaning if you add any new field to any data target and activate the target. This will result in inactivation of transformation and also DTP will be inactive.
2.  I'm seeing an inactive transformation based on a data source that no longer exists?
     This should not happen, when you delete the source (in your case the DataSource) then the transformation is automatically removed.. since there is no connection between the two (source and target). However, I shall advice you to verify the DataSource and check if it is still in use. If not, then you can delete the transformation and also DTP associated with the same.
Hope this helps.

Similar Messages

  • Finding Inactive Transformation

    Hi Guys.
      Is there any programe to find out all the inactive transformations in BI 7.0 system.
    Thanks in advance
    peter b

    Hi,
    Goto SE11 there check the following table RSUPDINFO.
    Here Using Object status field u can identify the active update rules.
    Hope it will solve ur problem.......
    Best Regards,
    SG

  • Reg: Inactive transformations

    Hi All,
    Some times while transporting objects into Productions, transformations getting inactive.
    In that case to activate transformations, we will retransport inactive transformations or we will open the Client ( very rare cases) and makes the inactive transformation to active in the system.
    For this shall we write a progarm to make inactive transformation to active version in production.
    Can you please provide ideas how to start this.
    Thx,
    Raj

    Hi reddy,
        i think might be the order of objects are not moving in sequence. while moving objects please make sure the order and this can be avoided.
    transport sequence:
    Info objects, data targets/info providers, data sources , transformations,infopackages etc
    mahesh

  • What is diff b/w active and inactive DCs

    hi
    please let me know what is diff between Active and Inactive DC's.
    If possible send some FAQs on JDI
    Thanks
    -mmukesh

    Hi Mukesh,
    When you are developing somthing through JDI (NWDI), you will have inactive dc and active dc.
    If you want to do some changes in code then you can do these changes through inactive dcs. Whatever changes you do in inactive DCs and until you check-in that activity. other developers cannot have those changes.
    but, when you check-in your activity those changes will be visible to other developers who are working on the same DC but this updated code will not be reflected in active DC.
    But when you activate that activity, those changes will be reflected in active dc and this active dc will be deployed on Development server.
    In summary, inactive DCs contain intermidiate code which is not ready to deploy on Development server yet. This updated code is available in Active DC.
    Hope now you are clear with Inactive and Active DCs.
    Regards,
    Bhavik

  • Dynamic File Adapter status -  Active or Inactive

    Hi Experts
    Is there any way  to set the Sender/ Receiver File adapter status dynamically to inactive or active.
    Is there any setting exists in the file adapters ? Please provide me possible solutions.
    Thanks
    Faheem

    Hi all,
    Many thnz for the response.
    There is one more way of doing this as well. Just now i found that.
    In the runtime workbench - Communication channel monitoring , Select the automatic control for the comminucation channel to make active or inactive .
    there are options for our comm channel to run specfic date and time.
    Thnz
    Faheem

  • Change status from active to inactive

    Hi Experts,
    How can I change status from active to inactive for the InfoCube?
    Thank you

    You can deactivate a cube by deactivating one of the infoobject in it:
    select one of the char in the cube
    menu option Extras/Unlock infoobjects
    The system will offer you to delete the cube content.
    If you agreed, the cube becomes inactive.
    Please assign if helpful

  • Active and inactive vendor

    Hi Guys
    can any one explain what is active and inactive vendor and how to see the list of vendor master.
    G.Krishnamohan

    in SAP easy access
    under Financial accounting >Accounts payable-> information systems-->masterdata report
    you can display blocked vendors also as a list there using those reports.
    the vendors which are blocked are inactive vendors
    anantha

  • Why am I having less free memory? What is active and inactive memory?

    Hi, I own a MBP penryn model. Right now, when I look in the activity monitor (or istat pro), it tells me that my free ram is 302mb, 56mb inactive, 816mb active, and 166mb wired. Why am I only having 300mb free if Im only using safari at the moment and not running anything else? Everytime I start up my notebook, the free space is around 1.70gb free at least. But why do I have that little bit of free space after a long time use?
    Sorry if this is a newbie question, im really new to this.
    Message was edited by: djvic87

    About OS X Memory Management and Usage
    Reading system memory usage in Activity Monitor
    Memory Management in Mac OS X
    Performance Guidelines- Memory Management in Mac OS X
    A detailed look at memory usage in OS X
    Understanding top output in the Terminal
    The amount of available RAM for applications is the sum of Free RAM and Inactive RAM. This will change as applications are opened and closed or change from active to inactive status. The Swap figure represents an estimate of the total amount of swap space required for VM if used, but does not necessarily indicate the actual size of the existing swap file. If you are really in need of more RAM that would be indicated by how frequently the system uses VM. If you open the Terminal and run the top command at the prompt you will find information reported on Pageins () and Pageouts (). Pageouts () is the important figure. If the value in the parentheses is 0 (zero) then OS X is not making instantaneous use of VM which means you have adequate physical RAM for the system with the applications you have loaded. If the figure in parentheses is running positive and your hard drive is constantly being used (thrashing) then you need more physical RAM.

  • How to query in SCCM 2012 to know how many active and inactive clients in a specific time and date

    Dear Everyone,
    Good morning. I need to perform a query to know how many clients PCs are active or inactive during the a specific time and date (let say, today 9pm). In my query, I want to know:
    1. How many client PCs is active at that time and date?
    2. How many client PCs is not inactive at that time and date?
    Any assistance is greatly appreciated. Thanks.

    Thank you Gerry for pointing out that it doesn't show real time date. I do agree with that. However, I am look at the (at least in this) report which supposed to [description] shows a list of computers not reporting any power activity for a specified date
    and time. Since I can only key in date in my selection (time option not given), I am expecting the report to show me whether there any client PCs that doesn't any power activity for the specified date. A list was generated, and a number of them shows HardwareInventoryScan,
    LastHeartBeatScan and LastPolicyRequest on the same date itself. I would like to know why these appears, so that I can learn from it.
    Due to the selection option given, I can't expect my original goal, but at least (hopefully) I can get to know (past event) how many and which client PCs is not powered on a particular date based on the date and collection selected.
    At least by getting explainations, I hope to learn something from this (how to read this report). Thanks in advance.

  • User ststus active or inactive

    HI All
    My project requirement is to find out the user status. Is the user active or inactive.. can anybody provide the technical details for the same. I mean table level..

    Hi,
    Status Profile in SAP CRM plays a very important Role. It's spans across multiple Objects. You can get the status profile information in the following Tables:
    TJ20 - Status Profile.
    TJ30 - User Status.
    Also, you can have a look at the following link for a very detailed information on Status Profile [ Status Management in Business Transactions|http://help.sap.com/saphelp_crm60/helpdata/en/5b/e4f53911cac83ce10000000a114084/frameset.htm]
    Hope this helps.
    Thanks,
    Samantak.

  • I want Queue status weather it is Active or inactive

    HI,
    please any one let me know information about the Issue
    i want Queue status weather it is Active or inactive
    from which file weblogic server will get information
    Reply me as early as Possible
    Regards,
    Srinivas

    U can use the follwoing JMX Code
    http://weblogic-wonders.com/weblogic/2010/01/21/jms-resources-using-jmx/

  • Pls can any one suggest me the Existing Report Name for Active and InActive

    Hi all ,
               pls can any one suggest me the Existing report name for displaying Active and inactive vendors .
    Rgds
    Rafi .

    hi,
    my transaction is VL02N change outbound delivery.

  • Active and inactive states for a button

    Is there a way to assign a button action only when the playbacket is on:
    i.e. lable "play3"on timeline instead of placing a hotspot over each button with code?
    Basically an active and inactive state.
    button1 exists on entire 30 seconds then only active when playbacket hits and stops on "play1", "play2", "play3" etc..

    Hey there-
    Yes, you can do this with a little bit of code.  Take a look at the "state management" section in this blog post, which will describe how to set variables, get variables, and use an if statement to code some logic in.
    http://blogs.adobe.com/edge/2012/07/18/tutorial-leveraging-independent-symbol-timelines/
    Hope this helps,
    -Elaine

  • Active and inactive program

    Hello Gurus,
          I have following three question about active and inactive program:
          (1)  what is the difference for active program and inactive program ?
          (2) I wonder if  there are inactive and active version for all program ?
          (3) I want to editing a program in operation. How can I get that ?
    thanks very much!

    Hi,
    Only activated objects can be accessed by all the users. If the object is under developement only active version is visible to everybody which can be accessed.
    An object may have any number of inactive versions, but it isi invisible to other users. It is confined only to your worklist. once you activate this it will beactivated and will be available for whom so ever it is authorized.
    By activating the object, the system checks the syntax of the entire object, then creates an active version, generates a runtime version, and deletes the corresponding entry from your inactive object list. Only active versions can be transported to other systems.
    <REMOVED BY MODERATOR>
    Thanks,
    Imran.
    Edited by: Alvaro Tejada Galindo on Apr 28, 2008 12:58 PM

  • Active and inactive portal objects

    Hello!
    I would like to indentify the active and inactive(unused) objects (Rolles, Worksets, Pages, iviews, etc...) in portal. Can any one advice me how to identify them.
    Note:
    Version Inforamtion
    J2EE Engine - 6.40 PatchLevel 104329.313
    Portal - 6.0.17.0.0
    KnowledgeManagementCollaboration - 6.0.17.0.0 (NW04 SPS17)
    Thanks in Advance,
    Immanuel Gollapalli.

    Hi Immanuel,
    a tool that might help you as a super administrator to check object dependencies / delta links and to compare object properties (e.g. for objects where you assume they are multiplied), might be the PCD inspector. Before using it you should be aware of the following comment: T"he change function should only be used with great care and by persons who have expert PCD knowledge. Accidental changes (such as deleting a PCD object) normally cannot be undone and could gravely endanger or permanently damage the portal." So be careful when using this tool. Details can be found in the documentation here: <a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/c0/2d8a80b5c12945b48cf29bc203f4b4/frameset.htm">http://help.sap.com/saphelp_nw2004s/helpdata/en/c0/2d8a80b5c12945b48cf29bc203f4b4/frameset.htm</a>
    Something that might be interesting for you as well: In order to check the usage of the pcd objects by end users, Portal Activity Reporting is pretty useful. Find documentation here: <a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/58/728ea01cf64fff996b827f2a06f9b1/content.htm">http://help.sap.com/saphelp_nw2004s/helpdata/en/58/728ea01cf64fff996b827f2a06f9b1/content.htm</a>
    Hope this helps to ease your tasks of finding unused or duplicate pcd objects, best regards
    Jana

Maybe you are looking for