Activities Generation using transaction template???

Good day Gurus!!
Really need your help!
I'm trying to generate list of activities for specific Target Group of business partners. Also I need that generated activities would have PLANNED DATE from business partner master data (visiting hours).
E.g. If business partner's visiting hours = Mon, 11am-1pm; Fri, 4pm-6pm, then 2 activities should be generated respectively one for Mon and second for Fri.
Transaction CRMD_CALL_LIST seems to be pretty convenient for that. However there are couple of questions:
1) Is there a way that generated Activities keep link to the Marketing Campaign to which Target Group is assigned?
2) Is there a possibility to use transaction template for mass generation of activities?
There is another approach of generating activities - I can do it from CRM_MKTPL. If I use this approach then generated activities are automatically linked to Marketing Campaign and are created using transaction template. BUT in this case:
1) How can generate these activities based on Business Partner Visiting hours???
Thanks for having read it to the end.
Any answer will be truely appreciated,
Nikita

Here are some jpgs since nobody has replied to this thread yet. I hope this helps everyone because I do need the help.
Thanks,
David
Attachments:
Block - Column Issue in MS Word.JPG ‏65 KB
Front - Column Issue in MS Word.JPG ‏25 KB
WORD - Column Issue in MS Word.JPG ‏52 KB

Similar Messages

Menu generation using a template.

I am migrating a 100% generated app from Designer 6i to 10g. And I just can't figure out the following:
When generating a menu using a template, you can either choose to place the generated menu to the right or left of the template items.
(using the preference 'Sequence generated menu items after template items').
These both work correctly, however Ineed to place the generated menu items in the middle of the 2 template options ie. Action menu (in template), then the generated menus, followed by the Help menu (also from the template).
Does anyone know how I can generate my menu with the template menus at each side.
Thanks.

Here are some jpgs since nobody has replied to this thread yet. I hope this helps everyone because I do need the help.
Thanks,
David
Attachments:
Block - Column Issue in MS Word.JPG ‏65 KB
Front - Column Issue in MS Word.JPG ‏25 KB
WORD - Column Issue in MS Word.JPG ‏52 KB

Creating Activities in CRM using Word Templates and Web Services??

Hi,
This functionality can be achieved through Adobe Interactive Forms from what I have learnt through demos etc. We are checking the feasibility of using with Word Templates instead.
This thread has multiple questions:
We are trying to set up the activity creation as mentioned in the CRM70 system.
1) At this point, finished the retrieval of information from the CRM Activity into a Word Template using a READ Web Service. Subsequently synchronized this with outlook and can see the Word document in the outlook item. Not able to open the same in Outlook, since it comes over as a XML document type. "Cannot open as there is a problem with the contents. ">" expected, line so and so...is the message
2) I created a Web Service that writes as well into CRM and would like to use this from the Word Template to create the activity in CRM
2a) Can the word template be incorporated with buttons that can trigger creation in CRM, similar to Adobe "Execute" etc
2b) If yes, and If there are some custom fields that I add to the activity transaction, in the UI, can I populate these with input from the Word Template, as well
Regards,
Ashwin

Hell Wregs,
You can create the Product in CRM GUI,by using Transaction:COMMPR01,not mandatory to have WebUI..,
but b4 that you need to set up Product Hierarchy and Product category under which the Products can be created.
Use Transaction:COMM_HIERARCHY Transaction to do this.
Hope this helps
let me know if any further questions
Thanks & Regards
Arshad

Generation of report in landscape mode using PDF template

Hi,
I am creating a report using pdf template, I have used the repeating group i.e I have used the code <?rep_field="BODY_START"?> and <?rep_field="BODY_END"?> as the repeating area and with the field which needs to be repeated i have used the code <?rep_field="T1_G1"?> in order to display data in the loop.
But finally when the report is displayed, the report acts strange ...sometimes it fails to open says that an internal file read error occured , whereas if I remove the <?rep_field="T1_G1"?> code it works fine , other times if at all it displays the report, the values in the repeating field operlap each other and they are vertically oriented wheras for landscape mode it should be vertical, I tried setting the properties and locking the fileds but all in vain.
Kindly help ASAP!!
Thankz
-Gaurav

I have had the same problem for a year. I never got my TAR answered so I tried again. I am waiting...again. Portrait works fine for me. I am using it to generate po's with custom headers. The only part that does not work for me is the total appears on every page, not just the last one. If I get an answer, I will let you know...

CAT2 duplicate PS network activities showing in personal template

Hello,
We are using SAP_APPL 4.7, support pack 22 and SAP_HR 4.7, support pack 10.
I don't know much about CATS & PS, but I provide our end user support.
We are using transaction CAT2 to report hours worked against PS network activities. We have run into a glitch when using the 'Save as Template' feature which creates a personal template. In our situation a person will add a network activity in the data entry area of CAT2. After they input their time they press the 'save as template' icon. Then when they enter CAT2 the following week to report their time, the network activity is still listed in the data entry area for them to enter their time. This part is working fine.
Now let's assume someone goes into project systems (CJ20N) and changes the network activity description (which shows in CAT2 as a informational output field). The person entering time then goes into CAT2. Their template is showing the network activity in the data entry area with the old description. When they input their hours and press enter, the new network activity description is pulled in on the time sheet, overlaying the old original description. At this point they still see one entry in their time sheet. Now here is the glitch - if the person goes in the following week to enter their time, they see two entries in the data entry area - one with the old description and one with the new description. Both records show the same network activity number, but now 2 records are appearing in their template because the description changed.
Our 'work around' has been to have people delete their personal template and recreate it from scratch if they see these 'double entries' due to a description change. Does anyone know a better way to handle this or if there is 'fix' that we can apply to correct this issue so we don't see two records? I did some looking in OSS, the only duplicate entry reference I could find was OSS note 1058293, however it was related to WBSs and was not for our release. Can anyone help? Thanks!

Hi Debbie.
When writing into CAT2 screen data is pulled when pressing enter. If a person has a wrong cost center, e.g., this cannot be changed by changing the persons cost center only. All the hours have to be deleted and rewritten for CAT2 then pulling the correct cost center.
Considering this behaviour of the system it would be a consequence that CAT2 pulls the new text but lets the existing entries unchanged.
You have not said anything about the written hours. Are these duplicated as well? If you open an OSS because of this I'd be curious to hear about the answer.
Best regards.
Jens

Use web template to open a report from a menu

Hi all,
I have created one web template where I have a role menu that shows all reports that are available to the user. When the user clicks on one of these reports, the report displays in a new window. So far everything is working fine.
But, I have also created another web template and I want the report that is displayed in a new window to use this template. How do I do this? I have been looking at the settings for the Role menu, but can't find anywhere to put the template name...
Anyone have any ideas?
Thanks and regards,
Tove-Mette

Hello,
yes you can use the publish function, but only to add new entries.
In Transaction pfcg (not in WAD or BEx) in SAP GUI and then select your role at the tab "Menu" you can add/remove/maintain/organize your menu.
just click on a menu entry and take sth.like edit.
Then you will see a link if you didn#t find the string &template_id= the system will take the standard template (Tranaction spro), and you can easily add or change this parameter.
Hope that helps, please ask if you need further explanation.
Regards
Marcus

Use of template using CPT1 for charging an additional cost to the product

Hello,
I'm trying to charge an additional cost burden to the cost of my product for every base unit produced. (cost estimate)
I have created a template using transaction CPT1 with sender as Cost Center / Activity Type in environment 001
The activity type is measured in EA (Eaches) while we make our product in boxes (Product base unit of measure is 'Boxes') with say 20 Eaches going into a Box
I have maintained an activity price using transaction KP26 at say $0.55 per Each
I have assigned this template to my costing sheet , valuation area and overhead key using transaction KTPF
When I now cost the material for costing lot size of a 1000 boxes, it still charges the product with the activity price per Each ($0.55) instead of multiplying $0.55*20*1000 = $11,000 for a 1000 boxes
The formula I have chosen in the template against 'Plan quantity ' is in the attachment enclosed:
I need help with doing the right thing within the template to make it give a cost burden of $11000 for every 1000 boxes costed (costing lot size)

Didn't realize that you have to use transaction CPTD to charge template overhead to production orders. That's why it was not working. Now it is posting by reading the confirmed yield. But it is still not converting eaches to boxes using the conversion factor in the material master.
The formula I'm currently using in the template for actual quantity is as under:
OrderYieldConfirmed / AltQtyFactorFromMaterial( AlternativeQuantityUnit
= 'BX', Material = OrderMaterialNumber )
Please tell me what I need to do to the above formula to make it convert boxes to eaches using conversion factor in the material master?
A similar formula has worked beautifully for 'cost estimate'
OrderTotalQuantity / AltQtyFactorFromMaterial( AlternativeQuantityUnit =
'BX', Material = OrderMaterialNumber )

Create a bussiness transaction templates

Hi guys:
Do you know if it is possible to create business transactions templates to pre fill some data ? like lead templates used for marketing purposes.
Thanks in advanced
Susana

we get deprived in differently time ranges our authorizations for the Standard Transactions.
So you try to bypass security checks put in place by the Basis team
or could you explain your requirement ?
Remember (or learn) that creating such transaction, you are able to bypass following authorization checks using SU24 (Identity Management, User and Role Administration of Application Server ABAP, AS ABAP Authorization Concept, From the Programmed Authorization Check to a Role, Editing Authorization Default Data (Development System) / Editing Authorization Default Data (Customer System). )
Regard,
Raymond

Filter Recurring Transaction Templates

Dear experts,
I want to filter Recurring Transaction Templates based on a dropdown field on the form. Suppose in dropdown I selected 'Monthly', then only those templates should be displayed on the form where Recurrence is monthly.
Can I do that ? Is this situation possible ?
Plz reply me to help me out.
Regards

Hi Pedro Magueija,
But I have to provide some solution to client. What can I do for this ? Any alternate solution ?
is there any possibility to delete or make invisible to those templates which are not in use or which have been closed ?
Plz reply.
Regards

REPOST:Timing does not show up when using custom templates

all,
When I create an unstructured template and use it in a report with show timing set to true, the timing does not show up.
any tips

Correcting my previous reply,
Timing will NOT show if you are using custom template.
null

How to use transaction FPOP

Hi, All,
I am trying to do delta upload for FI-CA business partner items 0FC_BP_ITEMS. I see there is a documentation say "Before you start the delta extraction, you should update the delta queue for this DataSource in the plugged-in OLTP system using transaction FPOP.". After my initial load, I made a new posting. And then I ran FPOP, and then I run delta update. But I am told "No new data since the last delta update". So seems delta did not get my new posting. Is there anybody can give some advice, or tell me how to use FPOP? I am not sure how to create the Variant in FPOP. Thanks a lot!
Meiying

HI ,
Steps for FPOP
1. Under General Selection tab input Date ID and Identification. - > Combination of this must be Unique.
2.Steps to create Variant - >Under technical settings tab , select tab for variant maintenance -> press F7 to create a new variant -> give a variant name -> Select number of intervals and give number value as 999 and execute.
New Variant is created.
3.Use the new variant, save all settings and "Schedule the program run".
4.Click on refresh to track the status of the program run.
5.Goto RSA7 and check for the Delta Queue - new values will be populated.

Link to PL/SQL procedure using a Template Manager template.

Hi,
I need to link a portal application report (report from SQL query) to a SQL procedure that uses a template manager template. The PL/SQL procedure requires parameters. I'm not be able to create a link based on a PL/SQL procedure. The only solution I found is to setup a link to a Form based on that procedure. But the form is only used to call the PL/SQL procedure by clicking the submit button and redirect to the template.
Another question:
Is it planed to support dynamic links based on column conditions?
I'm using Portal release 3.0.7.6.2.
thanks in advance
Jens

Jens,
You may want to search the Oracle9iAS Portal Applications forum. It may have the answer you are looking for. This forum is for questions related to the Portal Development Kit.
Thanks,
Sue
Sue

Report Generation Toolkit - Excel Templates

Hi, I've created an Excel Template with a single formatted
worksheet. I need to generate a report with a varying number of
worksheets but all based on the same template. I tried it using
the ADD WORKSHEET vi but this just adds an unformatted worksheet.
How can I use the template's worksheet format for each worksheet that
gets added?
Thanks,
Charlie

Hey Guys,
I know this post if kind of old but I hope maybe one of you can help me out. I'm using an invoke node similar to what is above to print out an Excel spreadsheet to the default printer. My issue is that when I try to print from the spreadsheet from the executable, the executable crashes. I know it is that invoke node. The reason why I say that is because until recently I had two development computers, one running on Windows 7 LabVIEW 2010, and one running on Windows XP LabVIEW2010. The original .exe was built with the XP machine, when I tried to make some changes with the Windows 7 machine and open the project it would say that there was a missing connection to the invoke node even though I did not touch that part of the application. I would then remove the invoke node, add it again and it would clear the error for whatever reason. I would then build the .exe with the Windows 7 machine and when it would run, the application would crash at the point where it goes to print the spreadsheet. I got around this by building the .exe with the Windows XP machine, and it worked fine without any issues. However, my Windows XP machine cra**ed out so i'm no longer able to build the .exe on the XP machine . I needed to make some changes to the .exe not anything involving this section of the code and for whatever reason when the application goes to print it crashes. I get some criptic crash report from Windows that is pretty much useless. I think its a Windows thing. This was workign correctly though until I did a build on the Windows 7 machine.
Attachments:
Printout Invoke Node Excel.png ‏70 KB
crash1.png ‏22 KB
crash2.png ‏23 KB

Is it possible to display a date as (DD-MON-YYYY) in excel output using excel template in xml publisher

Is it possible to display a date as (DD-MON-YYYY) in excel output using excel template in xml publisher where date should be displayed as date only not string.

I've tried to use hierarchy node variables, but it seems like you can't specify a attribute of the hierarchy such as level. So with the WBS hierarchy, if you create a hierarchy node variable, you specify the WBS value to select (If I understand this correctly). I wish I could instead specify "give me all the WBS nodes that happen to have the value of the level attribute greater or equal to 3. If I understand Juergens post, he is saying make security access so that only certain WBS levels can be returned in the query. I suppose we can try that, but that would then preclude getting the level 1 and 2 in the future if the authorization is global.

Schedule Background job using transaction CATM

Hi all,
Since we cannot schedule a background job using transaction CATM, I have created a program calling the CATM transaction through batch-input.
I have done a recording and entered the coding in a Z-program. For a vendor, I have recorded time in CAT2 for multiple purchase orders.
After entering the vendor number in CATM, all the purchase orders showed up. I have clicked 'select all' and posted.
When I run the program in the background, it posts only for one purchase order.
When I run the program in the foreground, using the Select All-button it only proceeds with the first line in my list of PO's.
How to read the whole stack and post the whole stack of purchase orders?
Please help me out with this.
Thanks
Regards
Srinivasan Desingh
408 368 3837

Hi,
When I run the program in the background, it posts only for one purchase order.
When I run the program in the foreground, using the Select All-button it only proceeds with the first line in my list of PO's.
See..it's a Z-program so Its difficult to answer without checking the program. But I think, you should check your BDC again from Debugging, with the help of your abaper. You will find, why its is processing only one entry.
Regards
Shishir

Activities Generation using transaction template???

Similar Messages

Maybe you are looking for