Activity Type ENGINE not set up for cost center

Hi all,
Currently, we have set up a work center in our system, which has the following intergration:
- Controlling Area --> TECH
- Cost Center --> TECH001
- Activity Type --> ENGINE
- Plant --> PN01
- Work Center --> PL01
Based on the above, the work center PL01 has the relationship of where Activity Type ENGINE and Cost Center TECH001 are linked together, where Cost Center is tied to Controlling Area TECH.
However, when a user tried to create General Task List (Trxn IA05), under Work Center PL01 and Plant PN01, and inserted Activity Type ENGINE in Operation item. It gives the following error:
Activity Type ENGINE not set up for cost center
I have also checked KP26 that everything is setup correctly.
Please can someone shed some light on the above?
Many thanks and regards,
Patrick
PS: Full point guaranteed for helpful answer.

Hi all,
I have solved the issue by changing the Start Date of the Work Center. Now everything works well.
cheers,
Patrick

Similar Messages

Error Activity type 502000 not set up for cost center 1000 cc111

hi all
While creating a work center (CR01) I need to enter a cost center and activity type for machine hours. However, while entering the activity type the following message appears:
Message no. CR 061
You are attempting to assign activity type XXXX to the work center. However, this activity type has not yet been set up in controlling area 1000 for cost center xxxxx.
while creating the activity type in KL01 i have already given * in cc category so it should go for all cc
What could cause this problem?
Thank you in advance,
Kind regards

Hi,
Check whether the activity type is maintained at the correct controlling area via KL03. If not, then create the activity type (KL01) in the corresponding controlling area.
Regards,
Darrel

Activity Type set up for cost center

Hi All ,
While creating a task list i m getting a message
Activity type is not set up for cost center in the year 2008
Message no. CR062
How could i set the activity type for cost center? Plz tell the procedure.
regards
sunil
Edited by: sunil gupta on Sep 19, 2008 10:12 AM

Dear Sunil,
Check out this,
1.Create a Cost center using T code - KS01.
2.Create an activity type using T code - KL01.
3.Assign the Rates for an activity type & cost center combination using T code KP26.
4.In the input screen of T code KP26 ,enter version as 0, from period 1 and to period as 12 and the Fiscal
Year as 2008,enter the cost center, activity type click on overview screen (F5)---> enter the per hour Rate
under Fixed price and set value as 2 for distribution key and plan price indicator as 3.
5.After performing this ,while creating the work center ,this combination of activity type & cost center
should be assigned.Then while creating routing/task list this work center can assigned for performing
operations.
Check with this & revert back if you need any further help.
Regards
Mangalraj.S

Fld selectn for mvmt type 561 / acct 900040 differs for Cost center (010)

hi all
while uploading raw material i find " Fld selectn for mvmt type 561 / acct 900040 differs for Cost center (010)" this error. please help me to solve this error.
thanks

Hi,
I do not have system now, but the above error happens due to wrong Field Selection of G/L & Movement type and not matching.
Option-1: Check Field status group in the create/bank/interest TAB for G/L in FS00 & check its assignments in OBC4 & Field Selection for status of cost center like optional/required/suppress
Use OMJJ t.code - 561 mvt - field selection and check additional account assignment (here cost center is optional/required/suppress.)
Option-2: Can also run the programme RM07CUFA through SE38 to update.
Regards,
Biju K

Fld selectn for mvmt type 261 / acct 404000 differs for Cost center (010)

Hi Guru's,
When trying to Post a stock from one valuation type to other valuation type in MB11 with reference to refurbishment order i am getting
"Fld selectn for mvmt type 261 / acct 404000 differs for Cost center (010)".
May I know the actual problem and please help on rectifying this.
-balaji

Hi,
Please Run the below Program through transaction code SE38
RM07CUFA
Provide Movement type 261
Company Code
GL code 404000
Find out the error message, there can be conflicts between movement type Filed status and GL field status group.
Please change the GL field status group.
Ravi polampalli

Actual activity price does not exist for cost center / activity type

Hi,
We are trying to upload the time sheet related data(number of hours an employee workred on a project) ect from Non SAP to SAP.
We have used a customized program and have loaded the data from se38.
All this HR data will be saved in CAT2
Later we transfer the time related data into SAP FI/CO using CAT7.
+When tested with a couple of employees time sheets, they got uploaded in SE38 proerly and when transfered it through CAT7 it was properly taking the hour*rate is cost and was reflecting in the respective cost element.
For a few time sheets in SE38 we were getting an error saying that the cost center(100501)/ activity type(EAT001) does not exist for 2010.
Hence we have taken, FY 2010, the cost centes and activity types in KP26 and have given the planned Activity as 1. No planned cost in KP06.
We have run the price calculation forr the FY 2010.
Then we were able to uplaod the time sheets, but when we tried to transfer the data through CAT7, it throws an error saying no activity price exist for cost center 100501/ activity type EAT001. If I ignore the warning an proceed, no amount is being calculated.
When uploaded employee time sheets before, all the cost were getting claculated and were entering into the respective cost elements, but now no amounts are being calculated and it is taking Zero.
When checked the previous years data i.e, 2009 all amounts are fine, in KSII I can see the activity quantity filled with some numbers in 2009, where from are they comming? I have checked KBk6 nothing was mentioned.
PLease assit
Regards,
shilpa

Hi
I never used CAT* though, but the error means that you need to maintain a activity price in KBK6 (Actual price)
Regards
Ajay M

"Mass activity type does not exist" while i try to create a recording in SHDB for FPRW

hi,
i'm trying to create a recording in SHDB for transaction FPRW marking the checkbox "simulate background mode". When i press the buttom "start recording" i recieve the error message >6 117 Mass activity type does not exist.
Does somebody know what can i do?
thnaks

On the right click on HD under video quality to filter it.

Activity type E not allowed for equipment entered

Dear Sir , We are using ETM . Following error is coming while creating performace based document .
Activity type E not allowed for equipment entered
Regards
Anil

Give 1 for both type and give it a try.
for target=actual which is type 5 pls check the link below
http://help.sap.com/saphelp_46c/helpdata/EN/66/bc6faa43c211d182b30000e829fbfe/content.htm

Yeild and Activity Types are not coming on confirmation

Dear Sir's
Hope everyone fine by the grace of GOD.
Friends i am facing a problem while doing Confirmation of production order in T.Code Co11n .Yeild(net production) is not picking from the Production order and also Activity types are not coming while doing confirmation.
please help me out in this problem
Best Regards,
HAFIZ ABDUL HASEEB KHAN
SC.PP Consultant

Dear
There are 3 possibilities to populate the activity and yeild field:
1) The system can propose them based on quantity, using the standard
formula, directly after entry of the operation being confirmed please check it in your order first
2) The system can propose them at the time of saving
3) They can be manually entered ~ however using this option, formula
will not recalculate using the settings from the Standard value key,
set for the work centre.
To set one of the above as default in customising, follow these steps:
- Call transaction OPK0
- Select the default Confirmation Profile SAP001 is being ticked marked. - Default Values , Qty and Service in OPK0
- Select the Default tab and set the default for Quants and Services
to 'Immediate Proposal' or 'Propose When Saving'
These options allow you to choose whether the activity and yeild proposal in
C011N is given immediately after entry of the operation to be
confirmed or upon saving the confirmation. However note that if
you subsequently override these proposals by maually entering activity
details, the formulae will not be recalculated and manually entered
data will take presidence.
Hope this is clear
Regards
JH

IDoc type could not be determined for the IDoc in F110

Dear All,
The below mentioned error is encountered by us in F110.We have check all the setiing and not able to find the solution for this error.
Now our heads has gone for a toss....can anyone kindly suggest what and where we have missed out.
The system is not creating the IDOC file.....
IDoc type could not be determined for the IDoc
Message no. B1090
Diagnosis
The IDoc passed to the ALE layer could not be processed. The specifications passed in the control record were not correct.
The basic IDoc type (field EDIDC-IDOCTP on the outbound side or EDI_DC-IDOCTYP on the inbound side)has not been specified for this IDoc.
The attempt to read the basic IDoc type from table EDIDO also failed. No table entry was found for IDoc type from field DOCTYP.
Procedure
Possible error sources:
- The calling program did not provide values for the fields specified above correctly. Make a note of the transaction in which this error occurred and consult your ALE administrator.
- The IDoc type is not known in your system and must be maintained.
Kindly do the needful.
Regards

If you want to create IDocs from the proposal run, outbound parameters (we20) with the 'Test' flag are required in addition.
see OSS note 504230 : Message EUPEXR forms the logical unit around the individual payment messages (PAYEXT IDocs). The E1IDRD1 segments contain the IDoc numbers of the payment messages in field DOCNUM. Segment E1IDRS1 contains check sums (total of all amounts, account numbers, bank numbers, number of payment messages). This information is provided for the EDI subsystem. Set up EUPEXR In Transaction WE20 for the partner profile for the house bank, create the outbound parameters for message type EUPEXR with IDoc type IDCREF01. If you want to create IDocs from the proposal run, outbound parameters with the 'Test' flag are required in addition.

Goods Issue for Cost Center 201 : special stock E not supported

Dear guru ,
I need to run a goods issue(trx.MIGO) for cost center using movement type 201 for a material
in special stock E (with sales order and sales order item).
The system send this message : special stock E not supported.
How can it solved this problem ?
Thanks in advance.

first tranfer stock from Sales Stock to Own stock as follows
Tcode - MB1B / MIGO
Mvt type - 411 E Transfer posting sales order to own
Then issue this own stock to Cost center as follows
Tcode - MB1A / MIGO
Mvt type - 201
hope it helps]
Regards,
Rahul

Why time-dependent not work for cost center and profit center hierarchy

Has anybody been able to successfully turn on time-dependent for cost center hierarchy? Looks like the R/3 datasource 0COSTCENTER_0101_HIER is defaulted to be NOT time-dependent, and I dont know how to change the R/3 configuration to enable time-dependent for this datasource.
Here is what I found. If you go to RSA2 in R/3 and enter datasource 0COSTCENTER_0101_HIER, and then select "Hierarchy Info", you will see that all the time-dependent properties are unchecked by default. By comparison, Cons Unit datasource 0CS_UNIT_CSCU_HIER has Version Dependent Hierarchy as selected, and we are able to load Cons Unit hierarchy as time-dependent, but have no luck so far with the Cost Center hierarchy.
Can any BI guru tell me how I can make time-dependent work for the cost center hierarchy?
Thanks a bunch!

Check SETLEAF and SETNODE.
Basically CO Master data groups dont have seperate tables. They will be available in above tables. Choose proper Set class to filter the results

Error: property is not set correctly for User Defined Fields.

Hi Gurus,
I am trying to define a new field Department of type Lookup. For this i have created a new field in user defined fields. But when i click on create user in web console it give me "property is not set correctly for User Defined Fields."
I created a lookup field for department , but looks like i have to some kind of mapping. How can it be done?
Thanks,
sat

Hi Kevin,
I couldnt get it done. This is what I had done so far.
Created Lookup.Users.Dept ( with code code=23 & decode=treasury)
Added two field in xlwebadmin.properties & xlwebadmin_en.properties
lookupfield.header.users.deptcode=Department code
lookupfield.header.users.deptname=Department name
In my lookfield properties in
column caption=Department code,Department name
Column query= Not sure what to give? here
Thanks,
sat

HT204053 I have tried to load iCloud onto my Vista opperated pc but do not get a control panel with which to set it up. Each time I use my iTunes id to log into the iCloudI am told that it is an apple id but not set up for the Cloud. How do I get the cont

I have tried to install iCloud on to my Windows Vista pc. No control panel is present and when I try to login to iCloud using my iTunes id, I am told that it is an Apple id but not set up for the cloud. without the control panel where do I set up my iCloud id?

You can not setup a new iCloud account using a PC. You must use an Apple device (Mac or iPhone/iPad) to create the account, then sign into it using your PC.

The OMS is not set up for Enterprise Manager Security

Hi, I'm trying to add an agent to grid control and its not connecting with the management server because i cant secure it...
bash-2.05$ ../../bin/emctl secure agent <password>
Oracle Enterprise Manager 10g Release 3 Grid Control 10.2.0.3.0.
Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
Agent is already stopped... Done.
Securing agent... Started.
Requesting an HTTPS Upload URL from the OMS... Failed.
The OMS is not set up for Enterprise Manager Security.
i have tried this on two seperate servers, both do the exact same thing. However, on my repository server where the OMS is housed, i can secure the agent no problem. Does anyone know what the problem could be? My OMS is on a Linux (SuSE 10.2) 32-bit machine.
heres the emdctl.trc on the agent machine:
2007-07-11 11:00:20 Thread-1 ERROR main: nmectla_agentctl: Error connecting to http://cbldb3:3872/emd/main/. Returning status code 1
2007-07-11 11:00:21 Thread-1 WARN http: snmehl_connect: connect failed to (cbldb3:3872): Connection refused (error = 239)
2007-07-11 11:00:21 Thread-1 ERROR main: nmectla_agentctl: Error connecting to http://cbldb3:3872/emd/main/. Returning status code 1
2007-07-11 11:00:21 Thread-1 WARN http: snmehl_connect: connect failed to (cbldb3:3872): Connection refused (error = 239)
2007-07-11 11:00:21 Thread-1 ERROR main: nmectla_agentctl: Error connecting to http://cbldb3:3872/emd/main/. Returning status code 1
2007-07-11 11:00:22 Thread-1 WARN http: snmehl_connect: connect failed to (cbldb3:3872): Connection refused (error = 239)
2007-07-11 11:00:22 Thread-1 ERROR main: nmectla_agentctl: Error connecting to http://cbldb3:3872/emd/main/. Returning status code 1
2007-07-11 11:05:10 Thread-1 WARN http: snmehl_connect: connect failed to (cbldb3:3872): Connection refused (error = 239)
2007-07-11 11:05:10 Thread-1 ERROR main: nmectla_agentctl: Error connecting to http://cbldb3:3872/emd/main/. Returning status code 1
2007-07-11 11:10:08 Thread-1 WARN http: snmehl_connect: connect failed to (cbldb3:3872): Connection refused (error = 239)
2007-07-11 11:10:08 Thread-1 ERROR main: nmectla_agentctl: Error connecting to http://cbldb3:3872/emd/main/. Returning status code 1
bash-2.05$ lsof | grep 3872
bash-2.05$
seems to be failing the connect but nothing is running on the port so i'm not sure why
Thanks in advance
Message was edited by:
user581869

some further information and hopefully someone can help me...
I went to the OMS binary folder (fmc45712:$OMS_HOME/bin) and executed the following commands...
$OMS_HOME/opmn/bin/opmnctl stopall
$OMS_HOME/bin/emctl stop oms
$OMS_HOME/bin/emctl secure oms
$OMS_HOME/bin/emctl start oms
$OMS_HOME/opmn/bin/opmnctl startall
then i go to $AGENT_HOME on the OMS machine (fmc45712:$AGENT_HOME/bin) and execute..
$AGENT_HOME/bin/emctl status agent -secure
Oracle Enterprise Manager 10g Release 3 Grid Control 10.2.0.3.0.
Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
Checking the security status of the Agent at location set in /opt/oracle/OracleHomes/agent10g/sysman/config/emd.properties... Done.
Agent is secure at HTTPS Port 3872.
Checking the security status of the OMS at http://fmc45712:4889/em/upload/... Done.
OMS is secure on HTTPS Port 1159
I then to go the server i deployed the agent on that i want to get communicating wtih my OMS...
$AGENT_HOME/bin/emctl status agent -secure
Oracle Enterprise Manager 10g Release 3 Grid Control 10.2.0.3.0.
Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
Checking the security status of the Agent at location set in /u101/em/agent10g/sysman/config/emd.properties... Done.
Agent is unsecure at HTTP Port 3872.
Checking the security status of the OMS at http://fmc45712:4889/em/upload/... Done.
OMS is running but has not been secured. No HTTPS Port available.
same command, different computer, but on the same network, and it just doesn't work. The OMS is on Linux x86 and the agent on the alternate computer is on HP-UX. If anyone has any help it'd be much appreciated.

Activity Type ENGINE not set up for cost center

Similar Messages

Maybe you are looking for