Actual and Plan Versions annual view - Multiple versions per company code

Good Day,
Iu2019m creating an FI-CO query with an annual view of both Actuals and Plan Values, which uses period and version as input values. The dilemma is around the plan versions which are hardcoded per company codes (eg. 1 Company Code = versions 501 u2013 512)
Can anyone suggest a possible solutions as normally there is only one version used for planning but in this instance there are multiple versions per Company Code.
Currently the report is hardcoded for one Company Code and going forward it should cater for more than one(Company Company* 12 Version)
Kind Regards

Remove restriction on comp code. There could be 2 models.
1. Include comp code, value type and version in the rows. This way you get multiple records for a comp code. One record for actual data and one record each for plan versions. To have this model at the query, the data model in the cube also should be in this way (what we call as the account model), multiple records differentiated into actual/plan by valuetype and different versions by version.
2. Include comp code in rows. Create selections, one for actuals (restrict with key fig and value type 10, actuals), one for each plan versions (restrict key fig with value type 20, version 501. Create one selection for each version this way). This way we have one record per comp code with diff key fig for actual and plan versions. We call this as key fig model. To have this model at the query, the data model in the cube could be account model or key fig model. If it is key fig model then no need of selections. The key fig could be taken directly from the cube.

Similar Messages

Actual and Plan Versions

Hi,
I was wondering if someone could give me a general overview of actual and plan versions.
Points will be awarded generously.
Thanks,
Deki

Versions are nothing but scenarios.
There can be only one Actual, so only one version is available for Actual i.e 0
But the comapny can have different plans on the basis of various business scenarios for example, if they acheive 80% capacity utilisation or achieve break even etc for flexible reporting. This will help easy comparison at the period end.
Hope you are now clear about the versions.
Thanks
Siva

View multiple versions of content concurrently

I am currently working in an IT team that is beginning to use Webcenter Sites, and I was asked if there was any way to view multiple versions of web content side by side, to see changes made etc. I've not come across this feature before, does anyone know if it is possible to do such a thing using WCS, or if there are any plugins that can perform this?
Cheers,
Harrison

Hello Harrison,
What do you mean with "view multiple versions of web content side by side, to see changes made"?
You can enable the revision tracking by assettype in order to track the last versions.
Regards,
Gerardo

Actual and Plan Reporting

Hey guys,
as I am familiar with the Query Designer, I'm looking for a way, to select dimension members on rows. Anyway, I don't now how to achieve the following selections:
ACTUAL / APR.2008 -- ACTUAL / MAY.2008 -- ACTUAL / JUN.2008 -- PLAN / JUL.2009 -- PLAN / AUG.2009 -- PLAN / SEP.2009 --
I don't know how to achieve. I can select mimbers 2008 and 2009, and ACTUAL and PLAN...but then the cartesian product is shown.
How to achieve the above mentioned structure?
So far...
Christian

Christian,
   If this is a static report...in the sense that, you do not want to have your plan and actual categories to move with time...i.e next month in Aug , you do not want your actual till july and rest as plan....
this shld be achievable by hard coding the values of your categories...
1)when you open your evdre ..and click on the column headings plan/actual..you see a EVCVW() formula...telling you tht it is being pulled from current view....delete that formula and hard code the value to Actual/plan... and make your colkeyrange NOEXPAND.
But if the above situation is not your case, and you need a rolling forecast scenario...then one of the ways to achieve this is with excel functionality... as previously pointed by subramaniam.... you have to   use the now () functionality to get the month and year and concatenate these (TEXT(NOW(),"mmm") " "YEAR(NOW()))...
and based on the current month you have to define the categories Actual and plans and these have to be maintained   in your excel...and once you have your column headers right and have the colkeyexpansion locked with noexpand....you shld be set...
hope this helps...
Edited by: Vishal Mahawadhi on Jul 7, 2009 10:11 AM

Rolling forecase for Actual and Plan

Hi
Iam working on Rolling Forecast for Actual and Plan report.. My Planning here is Quaterly based so for example say we plan it on April so the months after april (May - Dec) would be Planning. So when my month keeps on moving the forecase also moves..
So can you please guys help me to get out of this with an solution..
Thanks

Hi,
If you are using BI-IP for your scenario of forecasting then you can refer to the below links for forecatsing strategies.
http://help.sap.com/saphelp_nw70/helpdata/en/43/0c033316cd2bc4e10000000a114cbd/frameset.htm
for forecasting strategies
http://help.sap.com/saphelp_nw70/helpdata/en/43/0c033316cd2bc4e10000000a114cbd/frameset.htm
If you are using SEM-BPS you can consult these links:
http://help.sap.com/saphelp_sem60ep1/helpdata/en/0a/242537cedf2056e10000009b38f936/frameset.htm
http://help.sap.com/saphelp_sem60ep1/helpdata/en/0a/242537cedf2056e10000009b38f936/frameset.htm
Forecast (old)
http://help.sap.com/saphelp_sem60ep1/helpdata/en/0a/242537cedf2056e10000009b38f936/frameset.htm
Forecast(Exit)
http://help.sap.com/saphelp_sem60ep1/helpdata/en/0a/242537cedf2056e10000009b38f936/frameset.htm
Regards,
Priyanka Singh

PWA 2010 timesheet: 2 different colors for the rows "Actual " and "Planned

Hello,
To make timesheet easier to read and fill, is it possible to have 2 different colors for the rows “Actual “ and “Planned”?
Thanks,
soudha

Hello Soudha,
By default the timesheet grid shows the cells in white color. But if you have little coding skills or a developer at your end, you can try this using "C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\TEMPLATE\LAYOUTS\JsGrid.js" java
script file.
You may have to modify it but I recommend to take a backup of the file and test in your test environment first.
Happy troubleshooting.....
Vikram Daruru - MSFT

Tables req: Actual and planned values

Hello Experts,
I would like to create a new zprogram, which will give me output.
Cost element- planned values- actual values-. Day1 actual cost -day2 actual costu2026day31 actual cost.
Can any one tell me in which tables the planned(KP06) and actual data will be stored?

Hi,
Actual and plan values on line item level are stored in COEP. COSP is the table for totals (again for both actual and plan). You distinguish between the two by 'Value type' field.
Regards,
Eli

Trying to figure out pricing and plan options to add multiple computers to current subscirption. We currently have a subscription that allows the programs on two computers, but now I need 5 computers to be updated with CC.

Trying to figure out pricing and plan options to add multiple computers to current subscirption. We currently have a subscription that allows the programs on two computers, but now I need 5 computers to be updated with CC. Have looked in to Small Business teams, but do not understand how many computers that is good for and if there is a professor or previous customer discount. Any help would be great, thanks!

Hi,
I presume that the new configuration is missing some parts as you seem to have the IP address of the external interface configured staticly on the interface but you have not configured any default route on the firewall? (Original configuration got default route dynamically and added it to the routing table)
You also mentioned that you were able to connect to the Internet which would indicate there was indeed a default route with the new configuration?
I am a bit confused about the host mask on the external interface (/32 - 255.255.255.255) ? Does the ASA really let you configure a host address on the interface? It can't lead anywhere as there is no next hop with a host mask. I think the ASA even blocks using a /31 mask link network which works with Cisco Routers.
I guess I would go through the basic troubleshooting step when the new configuration is in use
Check logs for any blocked connections or error messages
Check the Static PAT (Port Forward) configuration with the "packet-tracer" command
Capture traffic on the ASAs external interface (with the ASA itself) and confirm that you are seeing the TCP SYN of any connection attempts, or perhaps capture ICMP
- Jouni

CO- Actual and Plan data

Hi gurus,
I am creating a query with actual and plan column and restricting each column with the value type object of actual and plan respectively,but the plan data is not been shown in the columns.
I checked the value type master data and it has the plan and actual inside but when I am trying to restrict with the value type object, it only gives me the actual option and I have to force the plan option to restrict for the plan column.Don't know why it is not showing, cos I am showing it in the master data object for value type.Any help?
Thanks in advance

Hi Ravi,
Thanks for ur quick answer. I already tried that and the problem I have is that no data is coming for the plan column. I checked the Value type master data infoobject and saw both 10 and 20 in there,but when I am trying to restrict with the value type 20 in the query, it does not give me the 20 option.
I also checked the extractor in R/3 and could only see data for value type 10 and not 20, cos am using the datasource 0CO_OM_CCA9.Does that mean my datasource is not extraction data for value type 20 or how can I check for that?
Thanks

Joining Actuals and Planned Work from Project Server

Hi,
I have an SQL based query which returns Actuals and Planned work from Project Server; however a number of records (generally generic resources based on the ResourceIsGeneric column) are excluded. I believe this is because my Actuals query does not return
generic resources as we are joining both sides of the query on ResourceUID. I have included a snippet below - is there a way to join Actuals and Planned work so I can return all Resource data?
Thanks
SELECT tl.ResourceUID
,tl.ProjectUID
,tl.ResourceName AS [ResourceName]
,CASE
WHEN tl.ProjectName = 'Administrative'
THEN tl.TaskName
ELSE tl.ProjectName
END ProjectName
,ruv.RBS AS [RBS]
,Sum(ta.ActualWorkBillable) ActualWorkBillable
,Sum(ta.ActualWorkNonBillable) ActualWorkNonBillable
,Sum(ta.ActualOvertimeWorkBillable) ActualOvertimeWorkBillable
,Sum(ta.ActualOvertimeWorkNonBillable) ActualOvertimeWorkNonBillable
,CASE
WHEN Sum(ta.ActualOvertimeWorkBillable) > 0
THEN Sum(ta.ActualOvertimeWorkBillable)
END [HOURS]
,DATEPART(year, ta.TimeByDay) AS [Year]
,DATEPART(month, ta.TimeByDay) AS [Month]
,DATENAME(month, DATEADD(month, DATEPART(month, ta.TimeByDay), - 1)) AS [MonthName]
,puv.[Project Status] AS [ProjectStatus]
,ruv.[Primary Role] AS [PrimaryRole]
,ruv.[Resource Department] AS [Department]
,ruv.ResourceIsGeneric
,ruv.[Cost Category] AS [ResourceType]
,puv.[SAP Project Code] AS [SAPProjectCode]
,CASE
WHEN tl.ProjectName <> 'Administrative'
THEN NULL
ELSE tl.TaskName
END TaskName
,puv.[Project Plan Type] AS [ProjectPlanType]
,puv.[GEM Project Manager] AS [GemPM]
,ruv.[Rate Code] AS [RateCode]
,ruv.[Cost Centre] AS [CostCentre]
,ept.EnterpriseProjectTypeName AS [EPT]
,puv.[I DO Phase]
,puv.ProjectOwnerName AS [ProjectOwner]
FROM dbo.MSP_TimesheetActual_OlapView ta
INNER JOIN dbo.MSP_TimesheetLine_UserView tl
ON ta.TimesheetLineUID = tl.TimesheetLineUID
INNER JOIN dbo.MSP_EpmResource_UserView ruv
ON ruv.ResourceUID = tl.ResourceUID
LEFT JOIN dbo.MSP_EpmProject_UserView puv
ON puv.ProjectUID = tl.ProjectUID
LEFT JOIN dbo.MSP_EpmEnterpriseProjectType ept
ON ept.EnterpriseProjectTypeUID = puv.EnterpriseProjectTypeUID
WHERE ta.TimeByDay >= @xDate1
AND ta.TimeByDay < @xDate2
AND tl.TimesheetStatus IN (
SELECT ParamValues
FROM @ParamTable
AND ta.ActualWorkBillable > 0
GROUP BY ...
) TimesheetActual
FULL JOIN (
SELECT ruv.ResourceUID
,puv.ProjectUID
,ruv.ResourceName
,puv.projectname AS ProjectName
,ruv.RBS AS [RBS]
,Sum(abduv.AssignmentWork) AS [PlannedWork]
,DATEPART(year, abduv.TimeByDay) AS [Year]
,DATEPART(month, abduv.TimeByDay) AS [Month]
,DATENAME(month, DATEADD(month, DATEPART(month, abduv.TimeByDay), - 1)) AS [MonthName]
,ruv.ResourceIsGeneric
,puv.[Project Status] AS [ProjectStatus]
FROM dbo.MSP_EpmResource_UserView ruv
INNER JOIN dbo.MSP_EpmAssignment_UserView auv
INNER JOIN dbo.MSP_EpmAssignmentByDay_UserView abduv
ON auv.AssignmentUID = abduv.AssignmentUID
AND auv.ProjectUID = abduv.ProjectUID
ON ruv.ResourceUID = auv.ResourceUID INNER JOIN dbo.MSP_EpmProject_UserView puv
ON auv.ProjectUID = puv.ProjectUID
AND abduv.ProjectUID = puv.ProjectUID INNER JOIN dbo.MSP_TimeByDay_OlapView tbdov
ON abduv.TimeByDay = tbdov.TimeByDay WHERE abduv.TimeByDay >= @xDate1
AND abduv.TimeByDay < @xDate2
AND ruv.ResourceName <> 'Unassigned Resource'
AND ruv.ResourceName IS NOT NULL
AND abduv.AssignmentWork > 0
GROUP BY ruv.ResourceUID
,puv.ProjectUID
,ruv.ResourceName
,puv.projectname
,ruv.RBS
,DATEPART(year, abduv.TimeByDay)
,DATEPART(month, abduv.TimeByDay)
,ruv.ResourceIsGeneric
,puv.[Project Status]
) TimesheetPlanned
ON TimesheetActual.ResourceUID = TimesheetPlanned.ResourceUID
AND TimesheetActual.[Year] = TimesheetPlanned.[Year]
AND TimesheetActual.[MonthName] = TimesheetPlanned.[MonthName]

Hi,
you pasted just part of your query, e.g. is declaration of @ParamTable missing. Without complete query, it is difficult to see, what you are trying to do.
Could you please provide complete query?
Barbara
To increase the value of this forum, please mark the replies that helped to solve your issue as answer. If you find answers to questions from other forum participants to be helpful, please mark them as helpful. Your participation will help others to find
an appropriate solution faster. Thanks for your support!

Multiple Financial Accounting Company Codes but only 1 Legal Entity

Hi all,
We are implementing various countries payrolls, which includes posting to general ledger.
We have a situation whereby there are many company codes for financial accounting purpose (local term calls them company code / sector). These separate company codes need to be differentiated in posting documents.
For most countries we are able to have many company codes but 1 legal entity (for e.g 1 tax reference number, and company details for statutory reporting for various company codes). But for Malaysia, this is not allowed.
I understand that commonly that Company Code in SAP should be legal entity. But there are many companies who practises different external financial reporting that have 1 legal entity separated in different sector for GL / financial reporting purpose.
My question is:
1. How can we set multiple company codes, but with 1 legal entity details (e.g. Tax Reference Number, Legal Entity Company Name and Address for Statutory reporting) for Malaysia?
2. If this is not possibe, how can we split up the GL file (or at least have different separation in the same file to show the different company codes)? It does't seem that Personnel Area or Personnel Area is picked up by PC00_M99_CIPE (payroll posting). Where can we store this besides Business Area field for individual employees (as this field is already used to distinguish another internal GL reporting, e.g. for Indirect / Direct Employee).
Any advice will be greatly appreciated.
Thanks!
Vicky

Hi,
A client can either be valid for a company code at the smallest level, or the entire
corporate group.
The company code is defined in financial accounting. The balance
sheet and profit and loss statements are drawn up at the company code level.
The personnel area, which is only used in Personnel Administration, is unique in each
client. You must assign each personnel area to a company code.
You also use the personnel subarea only in Personnel Administration and it is the smallest element of
the enterprise structure. You link the groupings that define the entries to be used for
employees of a particular company code/personnel area to the personnel subarea.
I understand your question ,
question 1 is belong to FICO quesion , as a HR counsultant you have only way:
one way set your multiple company as HR personnel area level ,then make those personnel area belong to the company that with 1 legal entity details ,
another way is set your multiple company as a company have company code at SAP , then posting to each company ,then let FICO department to adjust subsequent account.
hope can help you
Olivia Yang

Can we use actual and plan data for same cube?

hi friends,
can we use actual data and plan data in same cube in bps.
Thanking u
suneel.

Hi,
Let us take std cube 0SD_C03 where we store billing info,sales order info and delivery info. But still in reporting we can get values without any mismatch in their respective KF. It is possible because of a cahracterstic called Documnet category which gets values in update rule by constant .
Similarly we can have 2 types of data (plan and actual) in a single cube by having different value for a characterstic. Most frequently used characterstics for this are 0VERSION and Value type.
With rgds,
Anil Kumar Sharma .P

Activity prices in KP26 used for actual and plan in version 0

We plan activity prices via KP26 in version 0. We then plan activity consumption via KP06, and run the plan reconciliation via KPSI.
During the year, we need to update the activity prices used in actual activity allocation. This price also comes from version 0.
When we change the activity price, the planned amounts change also. We are looking for a way to maintain a separate price for actual activity allocation.

Ajay,
Your answer definitely sent me down the right path...thank you!
For other's benefit, these are the steps I took to make this work:
1) set the "Purely Iter. Price" indicator in plan version 0
2) import planning layout 1-N01 from client 000 (OBKF)
3) add planning area "Cctr: Manual actual prices" to planning layout SAPALL (KP34)
4) add planning layout 1-N01 to planner profile SAPALL (KP34)
5) create and run custom program from note 551309 to add cost element field to the input screen in KBK6 (SE38)
6) transport planning layout for planning area "Cctr: Manual actual prices" (OKEX)
Now we can plan a price in KP26, and maintain a different price in KBK6 which is used in the actual activity allocation.
Thanks again,
Linda

SharePoint 2010 and Reporting Services add-in - multiple versions supported?

Hello,
I would like to try out Reporting Services with SharePoint 2010. I already have the Reporting Services add-in installed on the WFE for SQL Server 2008 R2, but not configured.
At this point I thinking it's best to move forward with SQL Server 2012.
Can both the 2008 R2 version and 2012 version of the Reporting Services add-in exist on the same WFE in separate instances? Or do I need to uninstall the 2008 R2 version first?
Thank you in advance,

Just upgrade to the 2012 version, you don't have to uninstall first.
Also, see the supported combinations of SSRS version and Addin version:
http://msdn.microsoft.com/en-us/library/gg492257.aspx
Use the highest version of the addin possible, as newer addins have offered performance improvements.
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

PO version management - view history version

Hi expert,
I'm using PO version management together with change PO output.
1. Is there a way to pre-view or re-print a certain history version of the PO output? currently only the last version can be previewed and I got error message when I try to reprint hisotory version (no printed relevant changes).
2. When I change the PO, a new version is not created until I save the PO. I have to come to the change mode again to mark it "complete". Is there a way to have the new version available before save, so I can make my changes and mark it completed right way.
3. Is there a standard SAP report shows incompleted PO versions? I need to run it to remind me of the PO's that I still need to work on or to mark completed.
Thanks a lot for your kind help!
Regards,
Jully

Hi Jully,
You can try the following link :
http://www.sap-img.com/mm001.htm
It is an ABAP program contributed by one of the SAP members, which reports all the changes made in PO and list out the details per document.
Take the help of your ABAP consultant to run for you.
See if it helps.
Best regards
Amit Bakshi

Actual and Plan Versions annual view - Multiple versions per company code

Similar Messages

Maybe you are looking for