Actual YTD & MTD value is not showing in BEx report....

Dear Experts,
Thank you all for the suggestions and support in solving the issues.
I need your help once again in one of the complicated issues I am facing.
Details :
We are using one report Dealer Target.
This report uses YTD and MTD. It shows the Target value (Planning Cube ) and Actual Sales value ( Actual Sales ). Here we are getting the right value of planning but not picking the actual sales figure from Sales cube.
As we are using YTD and MTD :
Actual YTD should show the a net sales from 1st'April to till date .
And Actual MTD should show the 1st of any month to that date (User input).
But in our case , both Actual YTD and MTD is blank. That means , data is not getting populated.
We are using an USER EXIT for the requirement...
But I am not able to find the way to proceed to find the problem where its getting stucked..
Please suggest .. Waiting for your valuable response.
Thanks,
Sanjana.

Hi,
In this case have you restricted Value Type for Actuals as 10 and Budget as 20 ???
This may be the reason why you are not getting Actaul values, pls check for the same.
Regards,
Vishnu

Similar Messages

  • Lov Values are not showing for Discoverer Reports in Application

    Hi,
    I developed some discoverer reports, those reports having parameters with LOV. Those LOV values are showing in Discoverer Desktop, but after registering those reports in Oracle applications those LOV values are not showing. Pls let me know how resolve this issue.
    Regards,
    Hanimi.

    Hi,
    Also it is necessary to know how the LOVs are defined. Are they based on Application flexvalues for example? In which case it may be that you have not got your NLS language parameters set correctly when connecting from Applications.
    Rod West

  • KF value is not Displayed in BEx Report ..where as cube, mpro end ok..!!

    Hello Experts,
    I ran a bex report. In that report KF some NetsSalesValue has not displayed in the BI Report for all the Sales Organiations where as other KFs has displayed the value for all the Sales Organizations.
    For that i checked my end. BI report is pulling data from Cube --> Multiprovider --> Bex Report.
    I myself checked KF value into Cube level, multiprovider KF level value is avaialable.
    And also i checked, in the query properties is there any filters, RKF, CKF, but...i found the KF is a basic KF.
    And also..i checked the whether the rollup has happened..properly or not and ran the query but no use.
    For your info upto 3 days..back KF value has presented in the report. After that only this issue has encounterred.
    I am in confusion where the exact issue will be.
    If any body faced this kind of scenario is your project, kindly reply me.
    For any more clarifications i will respond you immediately.
    Thanks,
    SN

    Hi,
    check aggregates,index etc for cube
    check key figure selection as well in Multiprovider for respective Infoprovider
    just create test query on Infoprovider and then on Multiprovider and see..
    Check RSRT - regenerate the query
    also see there are various options like execute+debug has ....just check them
    Thanks and regards
    Kiran

  • User Variables values are not showing in Bex analyzer

    Dear Friends,
    I created a report in Bex analyzer ( Excel).
    Now i want to show the variables values in the report.
    i put text item there and click on it but in filter tab there is no variable is exist.
    Any help will be highly appricated.
    Regards
    Naeem

    dear i know how to display the variable values.
    But unfortunatilly there is nothing appear in filter tab.
    my variables are not in filter tab its empty.
    i already choose the data provider.
    regards
    Malik

  • Parameter values are not showing in in the Organization Parameter form

    We have done a setup for an Inventory Organization.
    Everything was working fine.
    Values were showing everywhere.
    We have lot of transactions done in the org also.
    But suddenly yesterday when I was trying to open the Organization Parameter form for that specific organization, the form came up as blank and in the bottom the error is Query caused no records.
    I have checked data is there in the base table mtl_parameters.
    Value is coming for other organizations. Only one specific organization is having this issue.
    Even in Examine, I have taken the last query run on that form and ran the same in back end database, I can see all values are there in the database.
    But in frontend screen the values are not showing. even organization code also not showing.
    Navigation is: Inv Super user --> Setup --> Organization --> Parameter

    Have you checked Organization Access to ensure that no one restricted that org?
    Or shipping grants and roles?
    I think there are quite a few places that you can restrict access.

  • Created by column value is not showing in XSLT List View After Migration To 2013

    Hello All,
    In my XSLT Created By Column value is not showing. Please help me with this problem. My code is simple I have custom column in XSLT name as 'Reported By' in which I want to show 'Created By' column value. but it is not showing. please help me with that.
    Thanks in advance

    hi
    is anyone has answer for this question.
    thanks...!!!!

  • Excise values are not showing in billing

    hi all,
    In RG23D register BED, AED, ECS values are showing correctly, but in order (VA02) or in billing (VF01) excise values are not showing. So, what could be the reason and what need to be checked?
    thanks.

    mohan prabu,
    Its Surprising, how come it is not appearing in Order and billing but yet it is passed to register RG23D.
    1. Check Whether you have maintained those condition types in your pricing procedure.
    2. Check whether you have maintained VK11 i.e., Values for those Excise Condition Types.
    3. Check whether you have activated Statistical indicator for those condition types.
    4. Proceed performing Analysis in Item details --> Conditions Tab --> Click Analysis tab provided to check whether the conditio types has been executed or not.
    5. Check your Config Settings
    IMG --> LG --> Tax on Goods Movement --> India --> Basic Settings --> Determination of Excise Duty -->  Maintain Excise Defaults
    Check these initially and let us know your outcome...
    Regards
    Sathya

  • ST06 Screen values are not showing as ecpected

    Hi Experts,
    ST06 Screen values are not showing as expected like avg CPU idle time and min Swap space, page out and page in values etc.
    All fileds are showing "Zero Values" since last week and i just found tht today.
    I Went  to
    SM 36, All Configured standard jobs are SAP_COLLECTOR_FOR_PERFMONITOR, SAP_COLLECTOR_FOR_NONE_R3_STAT.. etc are running fine.
    Restarted the SAPOSCOL service also.Please suggest me.Please find the Enclosed values..
    Compare recent days for server cambsvr13    Date/time  27.06.2008 13:40:31
    Average values for peak workload
    Date      Usr  Sys  Idl    Pages in/h             Pages out/h               Swap space              Lan packets/h          Lan errors/h
               avg  avg  avg         max        avg         max        avg    max size   min free         max        avg         max        avg
    20080626    0    0    0           0          0           0          0           0          0           0          0           0          0
    20080625    0    0    0           0          0           0          0           0          0           0          0           0          0
    20080624    0    0    0           0          0           0          0           0          0           0          0           0          0
    20080623    0    0    0           0          0           0          0           0          0           0          0           0          0
    20080622    0    0    0           0          0           0          0           0          0           0          0           0          0
    20080621    0    0    0           0          0           0          0           0          0           0          0           0          0
    20080620    0    0    0           0          0           0          0           0          0           0          0           0          0
    20080619    0    0    0           0          0           0          0           0          0           0          0           0          0
    20080618    0    0    0           0          0           0          0           0          0           0          0           0          0
    20080617    0    0   99      17,240      9,685      97,730     97,575   10485,760  9,023,492      22,430     21,205           0          0
    20080616    0    0   99       7,260      3,978     101,340     97,418   10485,760  9,057,327      21,940     19,447           0          0
    20080615    0    0   99       1,390      1,088     101,330    
    99,113   10485,760  9,162,058      16,199     15,970           0          0
    Best Regards,
    Vinod

    Try stopping the SAPOSCOL NT service.  Then, copy this folder (making a backup):
    installdrive\usr\sap\prfclog to installdrive\usr\sap\prfclog_old
    Then, clear out everything inside of installdrive\usr\sap\prfclog
    Also, doens't hurt at this time to check the credential of the user running your SAPOSCOL, typically it should be the same as the user running your SAP instance.
    Start SAPOSCOL and wait for the OS collector job to run. Give it 24 hours, come back and check.

  • Key frame values are not showing

    Does anyone know why my key frame values are not showing? How do I get them back?

    See this about showing and hiding columns:
    After Effects Help | General user interface items

  • Stacked Column Chart Value does not show in Preview or SWF

    I have created a simple (one-column) stacked Column chart from an imported Excel 2007 spreadsheet. I am using 3 values and all three are there when I am editing the chart. When I do a Preview or Export it to a .swf file, the third value does not show up. It only shows the first two.
    I am running Xcelsius 2008, Version 5.1.3.0, build 12,1,3,495.
    Edited by: Rich Krejsa on Apr 9, 2009 9:35 PM

    Hi Rich,
    Try to rebind the data with the component and preview and see.
    Also check with other charts to see if you get the same behaviour.
    Try placing a table component and display those cell and see what values are there when you preview.
    There could also be posiblities that the third values must be very small as compared to the other two,so check that as well and may be select the secodry scale in the general tab for the 3rd series.
    Let me know if this helps.
    Thanks,
    Amit Mathur.

  • Sales orders Dispatch Actual No of pipes do not match with R3 report

    Dear Gurus,
    Looking Ur assistance for an issue.
    Issue: For some of the sales orders Dispatch Actual No of pipes do not match with R3 report. Actual No of Pipes matches with LIKP table values in R3. Query needs to be modified to restrict records as per logic in WGSRLDES report/program.
    Can U help me in this Regard.
    Ur Responses are most appreciated.

    Hey Pathak,
                        The problem is, BI report is matching with the datails with R/3 LIKP table. But the business user is using Report WGSRLDES report/program, where the data is missmatching.
    Hope U got my Point.

  • Grand total values are not matching with Detail report

    Report has grand totals and when I drill to the detail report, grand total values are NOT matching with parent report totals, I did some analysis but I'm clueless on this issue.
    Please provide your thoughts and insight on this issue..
    Thanks

    is your summary and detail reports hitting different facts, like summary hitting aggregate and detail report hitting it's corresponding detail level fact..?
    if then,
    From Front-end:
    Fix the filter values in detail report that are passing from master report then try delete each columns then check the grand total. If you found your values is matching by deleting particular column then you need to investigate what is the issue around with that dimension table..
    From Database side:
    1. check first aggregate table has proper aggregate data of it's detail..
    2. Take the detail report obiee generated query and try to comment each dimension table and it's corresponding joins to the facts, (before, this delete all the dimensional columns and other measures from select statement and put only that measure where you are getting wrong value, so that you need not to comment all the select and group by columns which saves your time.. ). Need to check by commenting each dimensional wid and it's table from clause, if you found that values is matching then there is some problem with wid columns data population in your ETL.
    Is that BI-Apps project?
    btw, whtz ur name?

  • Option claims from CRM are not showing in BW report.

    Hi All,
    We are having a problem with BW report. The report shows all the claims thatt are created in CRM system( spource sys- CRM). We notices that claims that are called as option claims are not showing in BW report, but they are present in BW. I have checked filters in report design. no filters exist. Where they are getting filtered out. Please help me.
    Haaris..

    Hi,
    I am giving you ore information on the above issue, the above query is running on an infoset, I realized, data is missing from infoset. Where as the data is present in DSO.
    The other thing I can see every other claim in BW, but I cannot see Option claim which are very less compared to other claims.
    The infoset has four DSOs and one characteristic as components.
    Please let me know if you get any idea?
    Haaris.

  • Safari 6.0.1 not showing in System Report (installations)

    I have noticed that Safari 6.0.1 is not showing in System Report (installations) only the previous Safari 5.1.7 - Anyone know why this should be so? Now in Mountain Lion we do not have the update info in Software Update as before; only by going to "About this Mac". Any help appreciated!

    Now in Mountain Lion we do not have the update info in Software Update
    If you click your Apple menu icon you should see Software Update from the drop down menu.
    Clicking Software Update should open the App Store for you.

  • Actual and Commitments values are not Appearing in Internal order report

    Hi
    We have done budget in KO22 for Internal Order and active the availability controle after that we made PO with the same IO and with account assignment category 'A' and GR also happened.
    So when we run the report (S_ALR_87013019 - List: Budget/Actual/Commitments ), system is not showing Actual and Commitments values...
    Please help me in this regard...
    Thanks,
    Saisri

    Hi,
    Here we are giving internal order in PO with account assignment category 'A'
    In case of Account assignment category 'K'  it is showing the Actual values in Report.
    Why is it showing Actal /commitment values incase of 'K'  ?
    Why it is not showing when we select the 'A' category ?
    Please provide me answer about my queries...plz
    Thanks,
    Saisri

Maybe you are looking for

  • If statement in sql

    regarding the following sql: SELECT a.lname, a.fname, a.user_id, c.address, c.city, c.zip, c.addresstypeid, d.descriptor as state FROM users a, address c, maintstatetype d WHERE a.user_id = c.user_id(+) AND c.statetypeid = d.statetypeid(+) AND c.addr

  • MAKING HYPERLINK IN APEX : EDITABLE WORD DOC. .  .? KINDLY HELP

    I follow these steps to make a hyperlink to open MS Word document. Step 1: go to shared component Step 2: go to static files Step 3: click on create and upload the document file here eg demo_file.doc Step 4: now create a new html region and put follo

  • Raw Material Cost Analysis

    Hi Everyone, Need to create a query to find raw material cost of each sales/based on AR/ invoice- quantity varies in each sales. Is there anyway around? Thanks Edited by: Anoop Jacob on Feb 20, 2009 2:09 PM

  • IMac 20", display changes to grey/white -- is it crashed, locked up?

    iMac 20-inch 2.0GHz Intel Core 2 Duo, using 10.6.3 Twice in the past week, while typing an email or browsing a web page, the display has switched to a dim grey/white uniform colour. I haven't been able to figure out the source of the problem or how t

  • Name of Syndicated XML file(MDM SS)

    Hi, Currently syndication server creates files with such names: "10002-10-1-04-01-09-10-33-11_090401-103314_000.xml". I Have three question:  1. How can I change names of syndicated files? 2. As I understand first part of the name "10002" shows numbe