ADA Complaint pdf for the hearing and visually impaired

I am working in Acrobat X on Mac OS 10.8.5. I need a tutorial on making pdf files ADA compliant for the hearing and vision impaired. Is there a movie available on Adobe TV?
Thanks
Pandora273

Is browse here: http://www.apple.com/accessibility/

Similar Messages

  • I am using Numbers app for the ipad and it has been working absolutely fine but now, when I want to email a spreadsheet as a PDF via the 'share and print' option, the file now doesn't appear as an attachment to the recipient. Any ideas please?

    I am using Numbers app for the ipad and it has been working absolutely fine but now, when I want to email a spreadsheet as a PDF via the 'share and print' option, the file now doesn't appear as an attachment to the recipient. Any ideas please?

    Hi mafiose15,
    Thanks for visiting Apple Support Communities.
    Restoring your iPod to factory settings is the best way to try and get it back to working order. You can use the instructions below to restore it:
    How to restore iPod
    Verify that you have an active Internet connection, because you may need to download new versions of the iTunes and iPod Software.
    Download and install the latest version of iTunes if necessary.
    Open iTunes. Connect your iPod to your computer using the USB or FireWire cable that came with your iPod.
    After a few moments, your iPod will appear in the Source panel in iTunes.
    Select your iPod in the Source panel. You will see information about your iPod appear in the Summary tab of the main iTunes window.
    Click Restore.
    If you are using a Mac, you will be asked to enter an administrator’s name and password.
    A progress bar will appear on the computer screen, indicating that stage one of the restore process has begun. When this stage is done, iTunes will present one of two messages with instructions specific to the iPod model you are restoring.
    Disconnect iPod and connect it to iPod Power Adapter (typically applies to older iPod models).
    Leave iPod connected to computer to complete restore (typically applies newer iPod models).
    During stage two of the restore process, the iPod displays an Apple logo as well as a progress bar at the bottom of the display. It is critical that the iPod remain connected to the computer or iPod power adapter during this stage.
    Note: The progress bar may be difficult to see, because the backlight on the iPod display may be off.
    After stage two of the restore process is complete, the iTunes Setup Assistant window will appear. It will ask you to name your iPod and choose your syncing preferences, as it did when you connected your iPod for the first time.
    You can find the instructions in this article:
    Restoring iPod to factory settings
    http://support.apple.com/kb/ht1339
    All the best,
    Jeremy

  • What are some features and/or apps for the hearing impaired?

    I am wondering, do you guys have an app and/or feature for a MacBook Pro, iPad 3rd generation, and iPhone 5 for the hearing ampaired?

    Is browse here: http://www.apple.com/accessibility/

  • PDF PO Release - XML Tags for the Header and Line Attachments

    Hi,
    I request you to please help me in finding out the XML tags for the PDF PO Release Header and Line Attachments? I tried to get the XML data by running the 'PO Output for Communication' program with the parameter as 'Debug' but its completing normally without giving me the XML data in the log file.
    Please help me in finding the XML tags for the PDF PO Release for the Header and Line Attachments.
    Thanks,
    Kunal

    Hi Kunal,
    Following syntax will get you the header and line level short and long text attachments.
    --Header short text attachments
    <?for-each:HEADER_SHORT_TEXT_ROW?>
         <?SHORT_TEXT?>
    <?end for-each?>
    --Header long text attachments
    <?for-each:/PO_DATA/HEADER_ATTACHMENTS/LONG_TEXT?>
         <?.?>
    <?end for-each?>
    --Line short text attachments
    <?for-each:LINE_SHORT_TEXT_ROW?>
         <?SHORT_TEXT?>
    <?end for-each?>
    --Line long text attachments
    <[email protected]:PoLnID;'PO_LINE_ID'?><?for-each:/PO_DATA/LINE_ATTACHMENTS/ID[. =$PoLnID]?>
         <?current()[$PoLnID]/preceding-sibling::TEXT[1]?>
    <?end for-each?>
    Also note that, while running the program in Debug mode for a particular PO/Release the status should be INCOMPLETE, otherwise you won't be able to see the XML tags.
    Thanks,
    PS.
    Edited by: PS on Sep 25, 2012 6:16 AM

  • I have subscribed to Adobe Export PDF for one year and paid the fee per my credit card.  I just received an sms to inform me of the amount of R230.61 was deducted today by Adobe Systems Software. I did not request to renew for another year.

    I have subscribed to Adobe Export PDF for one year and paid the fee per my credit card.  I just received an sms to inform me of the amount of R230.61 was deducted today by Adobe Systems Software.  If you have charged for another year, please cancel that service and refund me as I did not request renewal for another year.  I don't find this service very useful as documents converted to Word is not really usable when trying to do changes and amendments to the document. 
    Please confirm.
    Regards
    Esther Grove
    082-334-6786
    Email: [email protected]@

    Hi,
    I have cancelled your Export PDF subscription for the order no.AD001162465AP..
    Your refund no.is 66181102.
    You will get the refund in 7 business days.
    Regards,
    Florence

  • InDesign - export a PDF for web view and print

    I have a brochure created for print in InDesign. I need to create a PDF for the web, that would be a link to download and print on a home printer. How do I accomplish this?
    Thanks for any help!

    export smallest size or take the print PDF in to Acrobat and reduce the size there.

  • Does anyone know how to use pages so you can export pdfs from the internet and automatically drag words from the document into the file name of the pdf (i.e., author, title of a scientific paper)

    Does anyone know how to use pages so you can export pdfs from the internet and automatically drag words from the document into the file name of the pdf (i.e., author, title of a scientific paper). For example, if I am downloading a paper by smith called "Surgery" that was published in 2002, it will automatically set the file name in the download to smith- surgery 2002. I have heard pages is smart enough to do this.
    thank you

    Pages can export only its own documents. They may be exported as PDF, MS Word, RTF or Text files.
    Pages can import (ie. Open a file as, or Insert a file into, a Pages document) documents in several formats, but won't rename the document as you describe. Documents that can be Opened (eg. Text, AppleWorks 6 WP, MS Word files) are converted to Pages documents, and retain their original names, with .pages replacing the original file extension. Files that can be Inserted (generally .jpg, .pdf and other image files) become part of the existing Pages file and lose their names.
    It may be possible, using AppleScript, to extract the text you want and to Save a Pages file using that text as the filename, but that would depend in part on being able to identify which text is wanted and which is not.
    How will the script determine where the author's name begins and where it ends?
    How will the script recognize the beginning and of the title, an decide how much of the title to use in the filename?
    How will the script recognize the year of publication?
    For papers published in a specific journal, with a strict format for placing each of these pieces on information, or containing the needed information as searchable meta data in the file, this might be possible. But it would require knowledge of the structure of these files, and would probably handle only papers published in a specific journal or set of journals.
    Outside my field of knowledge, but there are some talented scripters around here who might want to take a closer look.
    Best of luck.
    Regards,
    Barry

  • What temperatures are acceptable for the CPU and Graphics card?

    I have Intel Xeon X5400 series CPUs and a Nvidia graphics card.  
    It is interesting to monitor the temperatures but only if you know what temps matter...
    What temperatures are acceptable for the CPU and Graphics card? 
    I was not sure if this is the document of choice for the CPU or not. I was not sure I was decifering it correctly either. 
    http://download.intel.com/design/xeon/datashts/318589.pdf
    Any one know what we should be watching for as far as what is too hot? 
    I have a ThinkStation D10.
    Did not see this in the user manual but could have missed it. 

    I found my specs:
    Intel(R) Xeon(R) CPU           E5405  @ 2.00GHz
    You are correct. An E series. 
    I was so focused on the upgrade to the X5420 that I forgot what the system came with. 
    So what should I set my sensor high value to on my sensor program that shows up on the panel (taskbar)?
    For the E5405 or the X5420? 
    SIDE NOTE: where can I get 2 E5420s or better cheap? 
    Not ready to give up my filters just yet. I live in a dust factory! 
    My girl friend sews really nice bags but creates sewing dust and fuzz. 
    And well there are natural fibers everywhere...
    So other than the the X5492 (150watts),  the X5482, X5472,  X5470, X5460, X5450 are all 120 watts.
    Like the bulk of the X series...
    The E5405, E5410, E5450, E5440, E5420, E5430, E5470, E5462, E5472 are all 80 watts.
    The L series seems to all be 50 Watts.  
     For many the other Processors see this:
    http://www.intel.com/products/processor/xeon5000/specifications.htm?iid=products_xeon5000+tab_specs
    Message Edited by VitalBodies on 12-06-2008 08:46 PM
    Message Edited by VitalBodies on 12-06-2008 09:03 PM

  • This is so basic: How do you turn off Apple TV, or do you just exit by changing the Input back to regular TV? When I put Apple TV to sleep, I had to log in again, a very tedious process with that awful "announcer" for the hearing impaired (how to remove?)

    This is so basic: How do you turn off Apple TV, or do you just exit by changing the Input back to regular TV? When I put Apple TV to sleep after I installed it, I had to log in again, a very tedious process with that awful "announcer" for the hearing impaired (and how to remove that?).

    Welcome to the Apple Community.
    The Apple TV will put itself to sleep. I'm not sure what you needed to log into again, but you shouldn't have to. Do you have a little more detail about what happens.

  • Hello All... Back after a brief absence, things look a little bit different. I'm trying to take a 16 minute mini dv video and compress it for use on the web. I'm interested in any suggestions you may have on settings for the video and audio tracks. I'v

    Hello All...
    Back after a brief absence, things look a little bit different.
    I'm trying to take a 16 minute mini dv video and compress it for use on the web. I'm interested in any suggestions you may have on settings for the video and audio tracks. I've tried using Sorenson 3 (15 frames, key frames set to automatic, 320 x 240) for video and IMA 4:1 (mono) for audio. The resulting video looked great but the file size came in at about 255 Mb.
    Thanks!
    PowerMac G5 1.8 Dual   Mac OS X (10.4.3)  
    Message was edited by: Dan Foley

    Thank you for the replies.  Everyone was correct about the jack, interface, and phasing problems.  I have been unplugging my motu audio interface and then using headphones at work.  I have not changed any detailed audio output settings in logic.  When I read that the jack might be a problem I tried switching headphones.  This actually helped.  I am using dre-beats headphones and they seem to be having issues with the mac/jack-(the phasing/panning problems.  I can use these headphones with other devices but not the mac.  I have to use ipod ear buds and the phasing seems fixed.  Hopefully this information is helpful to someone else. 
    If anyone knows how to correct this issue please let me know its difficult to know what my final mixes are going to sound like and I have had to keep bouncing everything into i-tunes- sync to ipod and then listen in my car radio. 

  • Attachments dont download from Gmail in Safari, They disappear,I even tried re-downloading Safari and that download disappeared, it is not in my downloads folder, I actually searched in finder for the file and it is nowhere on my computer.  Please help!

    Attachments dont download from Gmail in Safari, They disappear,I even tried re-downloading Safari and that download disappeared, it is not in my downloads folder, I actually searched in finder for the file and it is nowhere on my computer.  Please help!

    Oh my gosh I had the EXACT same problem, and for ages I couldn't figure out how to fix it until today. Here's what I did:
    First I went onto my computer, opened itunes, and un-installed tumblr, vine and kik. These were the apps I was having problems with (it said I had them on my phone but, like you, they didn't show).
    Then I went to the itunes store, searched for each one, and it said I could update them so I did (just FYI: for tumblr a window popped up saying "please click ok to confirm you are 17 years or older", so I did that also)
    When I went back to my phone and tried installing them again (still on my computer), it worked!
    I hope this helps, because it was incredibly frustrating. Good luck!

  • TS3988 I changed my Apple ID to my new email address successfully for the iTunes and App store but it won't work for iCloud and it won't recognize my password. I read that this can't be done. How am I supposed to get into iCloud?

    I changed my Apple ID to my new email address successfully for the iTunes and App store but it won't work for iCloud and it won't recognize my password. I read that this can't be done. How am I supposed to get into iCloud? I plan on getting rid of my old email address which is my old Apple ID so how is that going to work?

    Same question Wish someone had replied!
    I changed my Apple ID to my new email and now cannot find any way to access icloud. Unfortunately I had allowed icloud to hijack my airbook files, so of course I am afraid I will lose them tomorrow when I exchange my iphone for a new one and cannot keep an icloud account i cannot access. What a poor sync system! Really atypical for apple!

  • HT1386 I have upgraded from  an iPhone 4 to a 5 i have an itunes account on my laptop for the 4 and have set up a new account for the 5 on my desktop how do I get my contacts , music, apps and photos over to the 5 from the 4?

    I have upgraded from an iphone to a 5. I have an itunes account on my laptop for the 4 and have started a new itunes account for the 5 on my desktop at work as the laptop was being fixed. I want to transfer all the contacts, apps and music, photos etc from the 4 to the 5 How do I go about this (in dummies language please!)

    iOS: Transferring information from your current iPhone, iPad, or iPod touch to a new device

  • When I try to play a song on my iPod Touch, it shows the information screen for the song and then skips to a new song but then goes back to the main playlist page without ever playing a song! Help!

    When I try to play a song on my iPod Touch, it shows the information screen for the song and then skips to a new song but then goes back to the main playlist page without ever playing a song! Help!

    thats tough man, yeah exchanging it is the best option. But why do people always leave a message saying" i'll probably just by an ipod" and it's usually followed by, "even though i don't like apple or ipod" . I mean fine, if u feel like giving up on the zen micro thats fine, i personally don't care if you're going to buy an ipod. for god sakes ipod isn't even the next alternati've mp3 players, theres plenty. Are u just trying to get the creative people saying "oh man we lost another one to ipod" cuz i'm sure they don't lose sleep over u wanting to buy an ipod instead of a zen. *done ranting*
    Message Edited by bleakreserve on 02-3-2005 06:34 AM

  • I'm installing the new OS and iPhone is asking for a password to "restore" my iPhone, but I've never used a password for the phone and don't know what it is!

    I'm installing the new OS and iPhone is asking for a password to "restore" my iPhone, but I've never used a password for the phone and don't know what it is!  Can anyone help??

    You selected Encrypt iPhone Backups in iTunes.  Then you entered a password.
    It would be that specific password it is asking for.
    See here:
    https://discussions.apple.com/thread/3284065?start=0&tstart=0

Maybe you are looking for