Add custom field in the F4 help for selecting source field in tcode FMDER

HI,
I an working in FUND MANAGEMENT, i want to add custom field in the F4 help for selecting source field in t-code FMDERIVE.
How this possible.
Regards,
Pankaj

Similar Messages

Freely Programed Help for select-option field

Hi,
how can i set freely programmed help for select option field, i mean while adding selection field what are the parameters that are important for freely programmed help.
i have implemented iwd_value_help in one component comp1 and declared the usage of comp1 in comp2 where i actually defined the usage of select-option component.
i used parameter i_value_help_type = if_wd_value_help_handler=>co_prefix_appldev while adding selection field, however when i presss F4 icon, the following message is coming
View WD_VALUE_HELP does not exist within the component WDR_SELECT_OPTIONS
Please suggest where i am doing wrong??
Edited by: kranthi kumar on Dec 29, 2010 6:19 PM

>
kranthi kumar wrote:
> Hi,
>
> how can i set freely programmed help for select option field, i mean while adding selection field what are the parameters that are important for freely programmed help.
>
> i have implemented iwd_value_help in one component comp1 and declared the usage of comp1 in comp2 where i actually defined the usage of select-option component.
>
> i used parameter i_value_help_type = if_wd_value_help_handler=>co_prefix_appldev while adding selection field, however when i presss F4 icon, the following message is coming
>
> View WD_VALUE_HELP does not exist within the component WDR_SELECT_OPTIONS
>
> Please suggest where i am doing wrong??
>
> Edited by: kranthi kumar on Dec 29, 2010 6:19 PM
Hi Kranthi,
Please help me to understand your design.
Why would you like to create a Freely programmed value help for select-option?. why not use wdr_select_option directly ?

How to add Custom Attributes in the SOAP header for OWSM

Hi,
I like to know how to add the Custom Attributes in the SOAP header for OSWM username token authentication.
Currently we are getting the header element like
<wsse:Security xmlns:wsse="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd" xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd">
here we need to add the attribute "soap:mustUnderstand="1" , so the element will look like
<wsse:Security soap:mustUnderstand="1" xmlns:wsse="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd" xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd">
Any info on this will be helpful.
Thanks,
ArunM

Hi Jay, you can make it in more than 1 way.
I suggest you the following:
- create an URL iview that points to any URL you want.
- define a Resource that points to the iview (with a window name, to open in new window)
- define an Area that points to the resource
- add your new Area to the your current Area Group
Regards!

Search help for selection screen field

Hi ,
steps for creating search help for a key field in selection screen..
tables is a userdefined from which the field is taken..
thxs,
vind

hi,
c this.
REPORT ZXYZ_0002 .
data: dynfields type table of dynpread with header line.
data: return type table of ddshretval with header line.
selection-screen begin of block b1 with frame title text-001 .
selection-screen begin of line.
PARAMETERS: P_BUKRS type T001-BUKRS.
selection-screen comment 30(20) BUTXT for field p_bukrs.
selection-screen end of line.
selection-screen end of block b1.
at selection-screen output.
if butxt is initial.
   select single butxt into butxt
         from t001
        where bukrs = p_bukrs.
endif.
at selection-screen on value-request for p_bukrs.
call function 'F4IF_FIELD_VALUE_REQUEST'
       exporting
            tabname           = 'T001'
            fieldname         = 'BUKRS'
            dynpprog          = sy-cprog
            dynpnr            = sy-dynnr
            dynprofield       = 'P_BUKRS'
       tables
            return_tab        = return
       exceptions
            field_not_found   = 1
            no_help_for_field = 2
            inconsistent_help = 3
            no_values_found   = 4
            others            = 5.
read table return with key fieldname = 'P_BUKRS'.
Add it back to the dynpro.
dynfields-fieldname = return-retfield.
dynfields-fieldvalue = return-fieldval.
append dynfields.
Get the company code from db and add to dynpro
data: xt001 type t001.
clear xt001.
select single * into xt001
         from t001
        where bukrs = return-fieldval.
dynfields-fieldname = 'BUTXT'.
dynfields-fieldvalue = xt001-butxt.
append dynfields.
Update the dynpro values.
call function 'DYNP_VALUES_UPDATE'
       exporting
            dyname     = sy-cprog
            dynumb     = sy-dynnr
       tables
            dynpfields = dynfields
       exceptions
            others     = 8.
start-of-selection.
rgsds
anver
if hlped mark points

How to raise a exception if the incoming value for a source field is empty

Dear all,
I have a scenario where the source and target structures are as follows :
The output for the above transformation logic is
The occurrence for field id in source and target is 1:1 Even if i don't provide the input value for id field,
system is not throwing any runtime exception.But if the field tag id is missing in incoming payload, then
system throws exception.
1) *** How can i raise a exception it the value for field id is empty
2) As the target structure occurrence for field id is 1:1 why system doesn't throw exception for null value
Regards
Koti Reddy

1) *** How can i raise a exception it the value for field id is empty
You need to impliment the check to throw the error
2) As the target structure occurrence for field id is 1:1 why system doesn't throw exception for null value
You are sending a blank value " " and the same is being passed. if you remove the tag from source xml it'll throw the error
Message was edited by: Hareesh Gampa

How to add custom actions to the Settings page for a Document Library?

I want to add a custom action under General Settings on the Document Library Settings page (listedit.aspx). So I added a new SharePoint 2010 "Empty Element", and put this code in the Elements.xml file:
<?xml version="1.0" encoding="utf-8"?>
<Elements xmlns="http://schemas.microsoft.com/sharepoint/">
<CustomAction
Id="MyClassName"
Sequence="999"
GroupId="GeneralSettings"
Location="Microsoft.SharePoint.ListEdit.DocumentLibrary"
Title="My Link"
Description="My description here"
Rights="ManageWeb">
<UrlAction
Url="~sitecollection/_layouts/MyProject/MyPage.aspx"/>
</CustomAction>
</Elements>
I found the GroupId and Location here: http://msdn.microsoft.com/en-us/library/bb802730.aspx but I am starting to wonder if this documentation is for MOSS2007 rather that SP2010
as it says.
What am I missing?
Any help or hint would be greatly appreciated!

Hi Henrik,
Can we add above custom action in our custom group like General Settings?
I have tried for that but it is not working.
I have tried as follows
<Elements xmlns="http://schemas.microsoft.com/sharepoint/">
<CustomActionGroup
Id="LibrarySettings.MyGroup"
Title ="My Group"
Sequence="1000"
Location="Microsoft.SharePoint.ListEdit">
</CustomActionGroup>
<CustomAction Id="Custom.Configuration.ListCustomSettings"
GroupId="LibrarySettings.MyGroup"
Location="Microsoft.SharePoint.ListEdit"
RequireSiteAdministrator="FALSE"
Sequence="100"
Title="Library Admins">
<UrlAction Url="_layouts/15/LibrarySettings.aspx?List={ListId}" />
</CustomAction>
</Elements>
But custom group is not created in list settings
Any idea what I am missing here?

Change Search Help for Payment Terms Field

Hi,
I would like to change the Search Help for Payment Terms Field, in Customer Master (KNVV-ZTERM). and in Sales Document. I believe it is the same.
Default is From Table T052 / T052U
ZTERM and TEXT1 Fields
I would like to have
From Table TVZBT
ZTERM and VTEXT
PayT Own Explanation Field.
Can we change the Search Help.

Hi,
The search help for the payment terms is not coming from the DDIC search help..
It is coded in the process on value-request event...
The function module FI_F4_ZTERM is called for this..you have to change this function module in case if you want the values from a different table..
OR do implicit enhancement in the subroutine FORM HELP_ZTERM in the include MF02DFH0 to call your search help instead of the function module FI_F4_ZTERM ..And do the same for the sales order also..
Thanks
Naren

Default value for selection screen field

Hi all,
I am using LDB PNPCE. I want to give default value for field Personnel area on selection screen.
How can I do it?
Thanks
Rahul

Hi Rahul,
In the INITIALIZATION event we can set the default values for selection screen fields.
INITIALIZATION.
loop at screen.
if screen-name = 'S_MATNR-LOW'.
CLEAR S_MATNR.
s_matnr-low = '1234'.
s_matnr-option = 'EQ'.
s_matnr-sign = 'I'.
append s_matnr.
CLEAR S_MATNR.
s_matnr-high = '5678'.
s_matnr-option = 'EQ'.
s_matnr-sign = 'I'.
append s_matnr
clear s_matnr.
endif.
endloop.
Hope it helps.
Mark if useful
Regards,
Saumya

How to add user defined F4 help for s LDB field?

Hi,
I am using PNPCE Logical Database for a program using the standard HR report category. But I want to have my own restricted F4 help for a particular field.Is it possible to override the standard LDB search help? I tried doing it , but I am getting a syntax error .
Mahesh

Hi Mahesh,
I don't think so that you can attach a User defined F4 help in a standard LDB.
What I would suggest is that you copy the standard LDB into Z LDB from SE80.
Then go to the selection screen of the LDB and either try and attach a F4 help by writing the code in it OR
Hide the field where you want to attach the F4 help with the keyword Exclude(you will have to check on the exact keyword).
And add the same field in the selection screen of the report and define the F4 help.
Do not forget to attach the Z LDB to your report by going to the Attributes.
Please refer to the code below for attaching a generic F4 help to a select options:
report zrich_0001 .
data: begin of ihelp occurs 0,
field type char10,
ftext type char50,
end of ihelp.
data: a_field(20) type c.
select-options s_field for a_field.
initialization.
ihelp-field = 'A'.
ihelp-ftext = 'Description A'.
append ihelp.
ihelp-field = 'B'.
ihelp-ftext = 'Description B'.
append ihelp.
ihelp-field = 'C'.
ihelp-ftext = 'Description C'.
append ihelp.
at selection-screen on value-request for s_field-low.
call function 'F4IF_INT_TABLE_VALUE_REQUEST'
exporting
retfield = 'FIELD'
dynprofield = 'S_FIELD'
dynpprog = sy-cprog
dynpnr = sy-dynnr
value_org = 'S'
tables
value_tab = ihelp.
start-of-selection.
In case you have any further clarifications,do let me know.
Regards,
Puneet Jhari.

To add F4 help for goods recipient field in MIGO

Hello,
I've a requirement in migo, under the details data, we have a "where" tab.
Under this tab, there is a field "Goods Recipient" for input.
Now I've to add a F4 search help for this input field such that it picks up from my ZTABLE.
Can anyone please suggest how to add the search help for this field.
Can this be performed using a field exit or any userexit. MBCF0005 or badi MB_MIGO_BADI ?
Please guide me and thanks in advance.
~With Regards,
Him

Thanks Rupali,
I've already created my search help and search help goes well with any of my ztable or zprogram. But, the field where I want to add my search help is a standard migo program SAPLMIGO, and the field where I want to add search help is "good recipient" field under "where" tab of "migo" transaction.
And the name of the field is WEMPF, which belongs to the sap standard structure GOITEM.
So, SAP wont allow me to edit it's standard tables. Is there any other alternative?
~With Regards,
Him

How to get the F4 help for a field in the selection screen

Hi all,
I am working on a report program. In the selection screen, I have the field 'Brand Node ID'(ZNODEID). The requirement is to have the F4 help for this field. This field is available in a 'Z' table ZNODETAB. There is no Value table maintained for the corresponding data element. So, without disturbing the table data element/domain, I should get the F4 help in the selection screen of the report. In the F4 help, data should be fetched from the table ZNODETAB and the field is ZNODEID. Is there any way to do this.
By searching the function modules, I could find that, we can use the FM F4IF_INT_TABLE_VALUE_REQUEST. But, I am not Sure. Can someone tell me the parameters to be passed to this function module to get the F4 help and the procedure to follow. S_NODEID is the select option used in the program. Please help me in this regard. Thanks in advance.
Thanks & Regards,
Paddu.

look at this code and try
select-options : S_NODEID for ZNODETAB-ZNODEID.
at selection-screen on value-request for s_nodeid-low
perform f4_nodeid using 'S_NODEID-LOW'.
at selection-screen on value-request for s_nodeid-low
perform f4_nodeid using 'S_NODEID-HIGH'.
end-of-selection.
FORM f4_nodeid USING    p_field.
declare it_node.
select znodeid from ZNODETAB into table it_node.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
    EXPORTING
      retfield        = 'ZNODEID'
      dynpprog        = sy-repid
      dynpnr          = sy-dynnr
      dynprofield     = p_field
      value           = space
      value_org       = 'S'
      display         = 'F'
    TABLES
      value_tab       = it_node
    EXCEPTIONS
      parameter_error = 1
      no_values_found = 2
      OTHERS          = 3.
endform

Need some help in creating Search Help for standard screen/field

I need some help in adding a search-help to a standard screen-field.
Transaction Code - PP01,
Plan Version - Current Plan (PLVAR = '01'),
Object Type - Position ( OTYPE = 'S'),
Click on Infotype Name - Object ( Infotype 1000) and Create.
I need to add search help to fields Object Abbr (P1000-SHORT) / Object Name (P1000-STEXT).
I want to create one custom table with fields, Position Abb, Position Name, Job. Position Abb should be Primary Key. And when object type is Position (S), I should be able to press F4 for Object Abb/Object Name fields and should return Position Abbr and Position Name.
I specify again, I have to add a new search help to standard screen/field and not to enhance it.
This is HR specific transaction. If someone has done similar thing with some other transation, please let me know.
There is no existing search help for these fields. If sm1 ever tried or has an idea how to add new search help to a standard screen/field.
It's urgent.
Thanks in advace. Suitable answers will be rewarded

Hi Pradeep,
Please have a look into the below site which might be useful
Enhancing a Standard Search Help
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/daeda0d7-0701-0010-8caa-
edc983384237
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ee93446011d189700000e8322d00/frameset.htm
A search help exit is a function module for making the input help process described by the search help more flexible than possible with the standard version.
This function module must have the same interface as function module F4IF_SHLP_EXIT_EXAMPLE. The search help exit may also have further optional parameters (in particular any EXPORTING parameters).
A search help exit is called at certain timepoints in the input help process.
Note: The source text and long documentation of the above-specified function module (including the long documentation about the parameters) contain information about using search help exits.
Function modules are provided in the function library for operations that are frequently executed in search help exits. The names of these function modules begin with the prefix F4UT_. These function modules can either be used directly as search help exits or used within other search help exits. You can find precise instructions for use in the long documentation for the corresponding function module.
During the input help process, a number of timepoints are defined that each define the beginning of an important operation of the input help process.
If the input help process is defined with a search help having a search help exit, this search help exit is called at each of these timepoints. If required, the search help exit can also influence the process and even determine that the process should be continued at a different timepoint.
timepoints
The following timepoints are defined:
1. SELONE
Call before selecting an elementary search help. The possible elementary search helps are already in SHLP_TAB. This timepoint can be used in a search help exit of a collective search help to restrict the selection possibilities for the elementary search helps.
Entries that are deleted from SHLP_TAB in this step are not offered in the elementary search help selection. If there is only one entry remaining in SHLP_TAB, the dialog box for selecting elementary search helps is skipped. You may not change the next timepoint.
The timepoint is not accessed again if another elementary search help is to be selected during the dialog.
2. PRESEL1
After selecting an elementary search help. Table INTERFACE has not yet been copied to table SELOPT at this timepoint in the definition of the search help (type SHLP_DESCR_T). This means that you can still influence the attachment of the search help to the screen here. (Table INTERFACE contains the information about how the search help parameters are related to the screen fields).
3. PRESEL
Before sending the dialog box for restricting values. This timepoint is suitable for predefining the value restriction or for completely suppressing or copying the dialog.
4. SELECT
Before selecting the values. If you do not want the default selection, you should copy this timepoint with a search help exit. DISP should be set as the next timepoint.
5. DISP
Before displaying the hit list. This timepoint is suitable for restricting the values to be displayed, e.g. depending on authorizations.
6. RETURN (usually as return value for the next timepoint)
The RETURN timepoint should be returned as the next step if a single hit was selected in a search help exit.
It can make sense to change the F4 flow at this timepoint if control of the process sequence of the Transaction should depend on the selected value (typical example: setting SET/GET parameters). However, you should note that the process will then depend on whether a value was entered manually or with an input help.
7. RETTOP
You only go to this timepoint if the input help is controlled by a collective search help. It directly follows the timepoint RETURN. The search help exit of the collective search help, however, is called at timepoint RETTOP.
8. EXIT (only for return as next timepoint)
The EXIT timepoint should be returned as the next step if the user had the opportunity to terminate the dialog within the search help exit.
9. CREATE
The CREATE timepoint is only accessed if the user selects the function "Create new values". This function is only available if field CUSTTAB of the control string CALLCONTROL was given a value not equal to SPACE earlier on.
The name of the (customizing) table to be maintained is normally entered there. The next step returned after CREATE should be SELECT so that the newly entered value can be selected and then displayed.
10. APP1, APP2, APP3
If further pushbuttons are introduced in the hit list with function module F4UT_LIST_EXIT, these timepoints are introduced. They are accessed when the user presses the corresponding pushbutton.
Note: If the F4 help is controlled by a collective search help, the search help exit of the collective search help is called at timepoints SELONE and RETTOP. (RETTOP only if the user selects a value.) At all other timepoints the search help exit of the selected elementary search help is called.
If the F4 help is controlled by an elementary search help, timepoint RETTOP is not executed. The search help exit of the elementary search help is called at timepoint SELONE (at the
F4IF_SHLP_EXIT_EXAMPLE
This module has been created as an example for the interface and design of Search help exits in Search help.
All the interface parameters defined here are mandatory for a function module to be used as a search help exit, because the calling program does not know which parameters are actually used internally.
A search help exit is called repeatedly in connection with several
events during the F4 process. The relevant step of the process is passed on in the CALLCONTROL step. If the module is intended to perform only a few modifications before the step, CALLCONTROL-STEP should remain unchanged.
However, if the step is performed completely by the module, the following step must be returned in CALLCONTROL-STEP.
The module must react with an immediate EXIT to all steps that it does not know or does not want to handle.
Hope this info will help you.
***Reward points if found useful
Regards,
Naresh

How to get the histoical data for newly added field in the cube?

Hi Experts,
I have small doubt on remodeling the infocube.
After adding the characteristic or keyfigure to a cube by using remodeling concept, how can I get the historical data for that particular field.
I have searched in SDN also but I didn't get proper information.
Please excuse me if I posted repeated question.
helpful answer will be awarded with poitns.
Thanks & regards,
Venkat.

hi
depending on your customer need you could use the remodelling functionnality but sometimes you have no way to retrieve what you want so another option you should consider is the following:
Advantages
that will cost less effort and guarantee the result.
Drawbacks
data is redondant for a while
space (depending on the volume of historical data)
So here are the steps :
step 1Adjust your extraction process according to the fields you need to add to populate the cube.
step 2 Then create a dso next or even a cube, feed the dso with a full load with the enhanced extractor you adjusted with the new fields in step 1 only once in fact this should be one shot.
step 3 Copy the query to the previous built multi-provider on top of the new historical data from dso and the running live delta cube. Adjust the queries if necessary.
optionnal Then if you want to get rid of the dso or new cube for historical data you could empty the actual one push the data from the new data provider and that's all.
bye
Boujema

New custom field in MCVBAK not available for selection in RSA5

I added a custom field to the communication structure MCVBAK. When I go to RSA5 and select the Maintenance button to select it, it is not visible in the list. Do I need to do something other than add to MCVBAK to make it available for selection?
Thanks.

Hi Boater,
Have you included this new field from MCVBAK in the extract structure from LBWE T-code? If you haven't, you need to do this and it will be available in RSA6. Hope this helps.
Thanks and Regards
Subray Hegde

Adding a new field to the search help exit

Hi friends,
adding a new field to the search help exit. How does it work ?
Thanks in advace
Ilhan

The search help exit allows you to modify functionality of search help. If you add a new field to the
parameter list that is not contained on the selection method you can manually populate it within the search
help exit.
This would be performed within the u2018STEP DISPu2019 section. Once within this section all search help
data has been retrieved and is stored in table RECORD_TAB (record_tab-string) as one long string value.
Therefore you need to read table SHLP in-order to locate position of value within string.
Example:
To find position of personnel number (PERNR) within elemenory search
help M_PREMN you would use the following code:
Loop at record_tab.
     read table shlp-fielddescr into wa_shlp
                                   with key tabname   = 'M_PREMN'
                                            fieldname = 'PERNR'.
You could then use this information in the following way, for
example, to find a persons organisation unit:
      select orgeh endda
        up to 1 rows
        from pa0001
        into (ld_orgeh,ld_endda)
       where pernr eq record_tab-string+wa_shlp-offset(8)
                                                  u201Cpernr length is 8
       order by endda descending.
      endselect.
      select single orgtx
        from t527x
        into ld_orgtxt
       where orgeh eq ld_orgeh and
             sprsl eq sy-langu and
           ( endda ge sy-datum and
             begda le sy-datum ).
If you have added a new field to the end of the parameters list
the next step is to populate it by adding this data to the end of
the record_tab string:
concatenate record_tab-string ld_orgtxt into record_tab-string.
modify record_tab.
endloop.

Add custom field in the F4 help for selecting source field in tcode FMDER

Similar Messages

Maybe you are looking for