Add custom MARC fields in MM41, MM42, MM43?

Hi all,
I need to implement 4 custom fields (aleady appended to MARC) to MM41, MM42, MM43 - I know how to add the new subscreen from the configuration path Logistics General/ Material Master/Configuring the material master (have also read OSS note 44410).
My questions are:
1) Will this configuration work for Articles (as opposed to materials) & what are the differences?
2) Is there a Badi needed to transfer custom fields to MARC in MM41/2/3? I can't find one - the fields only need screen validation and nothing else.
Many thanks in advance

Hi,
Please refer the below link.
This is for MM01. I understand that you are into Retail system. Hope the same processing logic can be done in your scenario also.
saptechnical(dot)com(slash)Tutorials(slash)ExitsBADIs(slash)MM(slash)MM01(dot)htm
Replace the bracket words with the correct symbols.
With Regards,
Sumodh.P

Similar Messages

  • Adding custom MARC fields to MASS for updating

    We have a requirement to add custom fields to MARC which was done easily.  Now we'd like to be able to update these fields via MM17 (MASS) but the fields don't appear.  What do we need to do to allow custom fields to be updated via MASS?
    Thanks,
    -=Rob=-

    Dear Customer,
    you should check note 576160 for furher information.
    You have to implement a BAdI (from mass maintenance) and a Customer Exit (from Material)
    mit freundlichen Grüßen/ yours sincerely
    Marcus Wagler
    SAP AG
    Installed Maintenance Support Germany

  • RFDOPR10 dynamic selection to add customer group field

    Hello,
    I am trying to add the customer group field in the dynamic selection
    option, when running the RFDOPR10 report. I don't seem to find the
    option to add the customer group field (KNVV-KDGRP). I tried looking in
    the config, but was not able find this report. I also looked for any
    OSS notes, but didn't find anything either.
    Can anyone please tell me if this possible to do? Thanks.
    Ahsan

    you have to update all the following routines in program RM07MLBD which load stock
    IF      BWBST = 'X'.
    *   select the valuated stocks
        PERFORM                  AKTUELLE_BST_BWBST.
      ELSEIF LGBST = 'X'.
    *   all own stock from storage locations or batches
        IF XCHAR = ' '.
          PERFORM                AKTUELLE_BST_LGBST_MARD.
        ELSEIF  XCHAR = 'X'.
          PERFORM                AKTUELLE_BST_LGBST_XCHAR.
        ENDIF.
      ELSEIF   SBBST = 'X'.
    *    special stocks
        CASE    SOBKZ.
          WHEN  'O'.
            PERFORM              AKTUELLE_BST_SBBST_O.
          WHEN  'V' OR  'W'.
            PERFORM              AKTUELLE_BST_SBBST_V_W.
          WHEN  'K' OR  'M'.
            PERFORM              AKTUELLE_BST_SBBST_K_M.
          WHEN  'Q'.
            PERFORM              AKTUELLE_BST_SBBST_Q.
          WHEN  'E'.
            PERFORM              AKTUELLE_BST_SBBST_E.
          WHEN  OTHERS.
    *       Angegebener Sonderbestand nicht vorhanden.
            MESSAGE S290.
            PERFORM              ANFORDERUNGSBILD.
        ENDCASE.
      ENDIF.
    But as material group is in MARA, you could fill a table from MARA using the SELECT-OPTIONS FOR MARA-MAKTL, then update the routine using a FOR ALL ENTRIES OF the result table (if not empty) (you could also use a JOIN with MARA)
    Regards

  • MM41/MM42/(MM43) - Sales view: How to add own input validation for CALP-END

    Hello.
    I am looking for an easy way, if any to create an own input validation for a certain field in the article master on the sales view tab. In addition to any standard input validation I would a like to add an own validation (for CALP-ENDPR) depending on the input.
    How can that be achieved in the easiest and proper manner - in general and for the specific case?
    There are no screen exits etc. here, if I am correct.
    Any ideas?
    Thanks.
    C.N.

    Hi,
    Please refer the below link.
    This is for MM01. I understand that you are into Retail system. Hope the same processing logic can be done in your scenario also.
    saptechnical(dot)com(slash)Tutorials(slash)ExitsBADIs(slash)MM(slash)MM01(dot)htm
    Replace the bracket words with the correct symbols.
    With Regards,
    Sumodh.P

  • How to Add Customer Class Field in WEB-IC

    Hi CRM Experts,
    Please provide me Solution on folooing queries.
    1)When ever i create a BP from WEB-IC, i need to enter Customer Class. Since this field is not available in the standard system i cant enter.
    So, Please tell me how to add new filed in the WebIC.
    Points will be Rewarded.
    Thanks in Advance.
    Regards,
    Sree

    Hi,
    See Thread entitled "Links to CRM Documentation" - there you will find a link to Interaction Center (IC) WebClient Consultants Cookbook. This document gives you all the info you need to add fields to the ICWC.
    http://service.sap.com/~form/sapnet?_SHORTKEY=01100035870000647973&_SCENARIO=01100035870000000112&_OBJECT=011000358700003057372006E
    Regards,
    Damien
    Please award points...

  • How to add custom user field in search result page

    Hi,
    I want to display user defined field values in search users result page. For example, I am having USR_UDF_SSN user defined field. Now if i search users, the resultant table should display the default OOTB values (USER ID, FIRST NAME, LAST NAME, STATUS) and USR_UDF_SSN value.
    We are using OIM 9.1.
    - Kalyan Mutya.

    You can't add this without having the source code. And on another note, i would highly suggest you DO NOT display a user's SSN unless you are in the HR system. These values should always be encrypted in OIM or you might have some bigger issues of private data being accessible.
    -Kevin

  • Copy SAP Stardard Program (MM41/MM42/MM43)  and Change the Menu

    I just get a requirement to copy the standard SAP T-code (Article create/change/displaty) as a customized T-code, then change the program menu to point as another t-code. How I can do this correctly?!
    what I do is copy the function group and the program as a new one respectively, then main the menu bar , but how can I assign the customized t_code or new program for the new function group?!
    Thanks in advanced

    You can create the new tcode via SE93,  specifying the new program name and initial start screen.
    Regards,
    Rich Heilman

  • Add Customer Field while posting Journal Entry

    BSEG-KUNNR is not exposed while posting journal entry using FB01. It is not available in the field status group also. How to add customer number field in the field status group to make it available during posting journal entry using FB01.

    Hi Jac,
    1, There is a known issue in a lower version before  2005A SP01 PL30when you try to run a retirement operation for a fixed asset with Net Price equal to the Net Book Value, it failed and you got the following error message:
    21141 error while posting journalentry: -5012 /Unbalanced Transaction.
    If you are in this scenario, please upgrade your Fixed Assest to the latest patch.
    2. If you are not in above scenario, this problem is possibly caused by the incorrect configuration of accounts in G/L
    Account Determination.
    There should not be 'Default VAT Group' related to these accounts except for account 'Default Revenue Acc. Retirement' in G/L Account Determination.
    1) Go to Administration - Setup - Fixed Assets - Open G/L Account Determination;
    2) Select an Account Determination Group;
    3) Under the G/L Account Determination window, open the account linked to 'Balance Sheet of Asset Acc.' by clicking on the yellow arrow;
    3) The Chart of Accounts window will open, click on the'Account Details' button beneath the window to open G/L Account Details;
    4) Empty the field 'Default VAT Code';
    5) Execute the Retirement functionality again.
    You can also refer to SAP Note 1050423 for reference. https://service.sap.com/sap/support/notes/1050423
    I hope it is helpful!
    Regards,
    Ivy Zhang
    SAP Business One Forums Team

  • Report Painter: How to add new(customer specific) field to CCSS table

    Dear Experts,
    We have requirement to display the orders based on Profit center or Profit center groups in report painter. So in report library(6O1), we want to add fieild PRCTR or any customer specific field(ZPRCTR) to CCSS table. Could you please let us know how to add field ?
    or is possible to add customer specific field(ZPRCTR) in CCSS and link that field to Profit Cetner(PRCTR) and profit center group.
    Please help us..
    Thanks in advance

    You can check the below OSS notes:-
    <https://service.sap.com/sap/support/notes/929889>
    <https://service.sap.com/sap/support/notes/522581>
    <https://service.sap.com/sap/support/notes/43493>
    Regards,
    Gaurav

  • How to add a new Field in the Dynamic Selection screen section.

    HI,
    There is a requirement in which I need to add a field in existing program of dynamic selections.
    I need to add a field KNKK-DBRTG (Customer Rating) in dynamic selections screen of some existing report
    which has a dynamic selection screen with other fields like customer account, company code etc. Along with this i need to add Customer rating field also in the selection screen.
    I have used GET KNKK statement to select this in the Dynamic selection screen. But I need to make it appear
    on the screen.
    LDB used is the Customer Database.
    I have added GET KNKK statement after GET KNA1 statement.
    Can any one help me how we can make this rating field appear in the selection screen.
    With the GET statement Credit control area Fields can be selected in the selection screen but I have to permanantly add the field in the selection screen.
    Regards
    Prashant Prabhu

    Hi,
    So you need that this new field have data in old records?
    1.- If you are in BI 7.0 and the logic or data for that New field are in the same Dimension, you can use a Remodeling to fill it. I mean if you want if you want to load from a Master Data from other InfoObject in the same Dim.
    2.- If condition "1" is not yours.
    First add the new field, then create a Backup Cube (both cubes with the new field) and make a full update with all information in the original Cube. The new field willl be empty in both cubes.
    Create an UR from BackUp_Cube to Original_Cube with all direct mapping and create a logic in the Start Routine of the UR (modiying the data_package) you can look for the data in the DSO that you often use to load.
    To do that both cubes have to be Datasources ( right click on Cube-> aditional function-> and I think is "Extract Datasource")
    Hope it helps. Regards, Federico

  • Customer specific fields or tab in SOLAR_PROJECT_ADMIN

    Hi Experts,
    is it possible to add customer specific fields to transaction SOLAR_PROJECT_ADMIN?
    If yes, is it also possible touses that fields for reporting functionalities?
    Best regards,
    Martin

    Hi Martin,
    By standard you can't add custom fields or tabs. But you can extend SAP Solution Manager to manage new object types as described in this blog post by Andreas:
    -Extend SAP Solution Manager to Manage New Object Types
    Kind regards, Fabricius

  • Adding custom fields to Article Master (MM41/MM42)

    Hi  ,
    I have a requirement of adding custom fields to Basic data of Article creation in MM41 . I appended the fields to
    MARA table using Append structure . I followed the steps given in note 44410 . But i am unable to find an EXIT/BADI
    /ENHANCEMENT to populate the values of custom fields which get triggered during MM41/MM42 .
    But the Exit EXIT_SAPLMGMU_001 gets triggered only during MM01/MM02 . Kindly guide me to solve this .
    Thanks and Regards,
    S.Sivakumar

    Hi,
    Business Requirement:
    As per the client Business critical requirements, additional fields are
    required in the Article Master. This is because the existing fields in
    the Article master are not adequate to capture the data.
    We have referred the SAP Note 925424 (Table MAW1) and 44410 (MARA) for
    this.
    Based on the above note 44410, we have added fields in MARA table,
    since Manufacturing
    activities are envisaged in future instead of proceeding with 925424.
    Whether, MAW1 (925424) also to be considered?  
    Since this is very critical requirement from client, we cannot avoid
    and do not have any
    alternate solution.
    These fields will be used in reports and pricing in sales &
    distribution.
    Apart from this, are there any other SAP notes to be referred?
    Is there any restrictions there in length for fields to be used in MARA table .
    By referring note 44410 , i added 20 fields in MARA table, in which some 4 fields are more than 40 characters .
    All custom fields are updated in MM41 and MM42 .
    Shall i proceed by this approach .Kindly guide me on this .
    Thanks and Regards,
    S.Sivakumar

  • How to add custom fields in BADI  Subscreen.

    Hi Friends,
    I have to include some custom fields in MFBF tcode.(In make-to-order tab page).
    To do that I have used RM_HR_INTEGRATION  BADI definition  and created implementation for this. In the provided subscreen I tried to add custom fields but it asks access key . I donu2019t know , how to proceed further. Your help is needed.
    Or kindly provide me solution to achieve my requirement.
    Thanks in Advance,
    senthil.

    Hi Venky,
    We can see the documentation in
    se18 -> badi -> LE_SHP_TAB_CUST_HEAD -> display -> documentation button above the definition name
    in the first pop-up of documentation..go to the end which says 'Further notes'
    Further notes
    Documentation on BAdI Interface LE_SHP_TAB_CUST_HEAD
    click on this and we have a detailed description of each method defined in the badi
    Hope it helps
    Regards
    Byju

  • Add a new field in custom table but not show on SM30

    I add a new field in a custom table, did Table Maintenance generator and SE93.  But that field did not show on SM30 screen.  How to make it show on the SM30?
    Thanks
    Helen

    Hi,
    I think its the Problem with TMG.
    Go to TMG screen delete the old TMG and regenerate the new TMG
    Hope it helps
    regards
    Prasanth

  • How to add custom field in delivery address/performance location tab in SRM shopping cart and Ship to address Pop-up in SRM PO?

    Hi Experts
    i have a reuirement where i have to add custom field in delivery address/performance location tab in SRM shopping cart and Ship to address Pop-up in SRM PO
    i am doing below steps for this.
    1. Adding custom field ZZfield in structure INCL_EEW_PD_PARTNER_CSF by  using  append structure.
    2. Spro ->Supplier Relationship Management -> SRM Server -> Cross application basic settings -> Extensions and field controls (personalization) -> Configure field control ->Configure Control for Fields of Substructures
    then click on  "Metadata for Fields of Substructures and Table-Like Enhancements"  
    add the below entry
    Bus. Object Set Type  : I am trying 7 and 29
    Structure Field Name  : ZZfield
    Bus. Object Type       : BUS2121/BUS2201
    Set Level                    : Item
    Field Visible :  Check box should be checked
    Field Enable :  check box should be checked
    Can anyone has the idea of this?
    Thanks
    Rohit

    Hello Rohit,
    Please create a enchancement for component  /SAPSRM/WDC_UI_DO_SHIPTO.
    Add new input field and label in view V_DODC_SHIPTO.
    Bind the input field value with field ZZfield from structure  /SAPSRM/WDC_UI_DO_SHIPTO in the context node SHIP_TO .
    Regards,
    Neelima

Maybe you are looking for