Add field to MM01, MM02, MM03

Hi guru,
I need to add some fields in MM01,MM02 & MM03  in BASIC DATA 1 tab.
I want to do this using BAdI.
The data will go to MARA table.
Expecting a better solution in brief from U.
With Thanks
Sohel

Hi,
Forgot to tell u Note No.
Please Follow Note No : 44410
You can also try.............
Note 38299: “Customized material master: concepts”
Note 44410: “Integrate Customer Specific fields in material master”
“To extend an existing material master table to include specific customer-specific fields, you can proceed as follows:
1. Extend the required table in the Dictionary using an append structure
2. Extend online maintenance in customer-specific material master maintenance.
a. Define a sub screen with your customer-specific fields in a customer-specific function group created as a copy of standard function group MD1
b. In configuration, assign this sub screen to a maintenance screen using the “Copy customized material master” function…..(program COPYMGD1 is available)
3. To update customer-specific fields via data transfer, proceed as follows:
a. Include the fields in central table T130F
b. Extend the data structures for data transfer to include the customer-specific fields
c. Include the customer-specific fields in those tables in which the incorrect data is stored during Direct Input.
Let me know if you need more information...
Affable
Arbind
Edited by: Arbind Prasad on Jan 25, 2010 10:32 AM

Similar Messages

  • Error in adding custom fields to mm01/mm02/mm03 trx

    Hello People,
    To add my custom fields in the basic view tab of MM01 transaction, i have performed the following steps:-
    1. Inserted the append structure in MARA table with the required fields.
    2. Copied function group 'MGD1' to 'ZMGD1' and then set the layout of screen '0001' as per my requirement.
    3. Then i made changes in spro as
         SPRO->Logistics-General->Material Master->Configuring the material master->define structure of data screens for each screen sequence and inserted my program name( of function group 'ZMGD1') and screen number(0001) in 21(Std ind.(short) tab pages)->7(Basic Data 1)->8(sequence).
    Now, if i click on SPRO option (view data screen), then i can see my fields added in basic data view...
    but when i execute 'MM01/MM02/MM03' trx  there my added fields do not appear....
    Does anyone know where i am missing out??
    Please suggest...
    Thanks in advance..
    Rgds,
    Abhi

    Here are some notes I have from when I recently added a new screen/subscreen to Material Master transactions.  Hopefully this information will help you.
    This guide should be used in conjunction with OSS note 44410 and IMG notes Logistics->Logistics Material Master->Material->Configure Customized Material Master.
    Online Maintenance.
    1. Add fields to append structure ZAEMARA.
    Use data dictionary maintenance u2013 SE11
    2. Generate table MARA.
    3. Add fields to view MARU and generate.
    Use data dictionary maintenance u2013 SE11.
    4. Create new sub-screen or add new fields to screen SAPLYMM1 9001.
    Use Screen Painter u2013 SE51.
    Change flow logic to add fields to field: statement and to add any validation required. Generate screen.
    If this is the first time additional data has been added to material master it will be necessary to create a new function group and associated programs. See Configure Customised Material Master paragraph Requirements.
    5. If new sub-screen, add to Customer main screen.
    Transaction OMT3.
    Double click on u2018Std industry sequenceu2019.
    Choose customer screen and Details.
    Change the first occurrence of 0001 (blank screen) to new screen number.
    Save.
    Back arrow.
    Click on Transport button and choose required transport.
    6. To include in 'Copy with Reference' processing - MM01, add new MARA fields to table T130F. (in each client)
    Use Transaction SM31. (make a copy of another ZZ field by typing over existing name).
    Add to transport manually:- R3TR TABU T130F + individual keys
    7. Test Material create, change, display.

  • Adding new field in MM01/MM02/MM03

    Hi All,
    I have a requirement to add a checkbox in MM01 costing2 tab page. I have done the basic configurations like adding a new field in MARC with Append Structure, creating Function group (for subscreen) in SPRO and assigning the same to the respective screen (2902) for Costing2 tab page.
    I am facing a problem that when i check the newly created checkbox in Costing2 tab page while creating new material. Once the material is successfully created, it is not reflecting in the MARC table for the same created Material,
    can anybody guide me to meet the desired requirement.
    Note : while running MM02 TCode the respective value to the newly created checkbox should retrieved from database table and if any change made to that should also be reflected back to MARC.
    Kindly help me in this regard
    Regards
    Babu

    USE set parameter id in the standard EXIT

  • Addtional field display in search help for plant in MM01/MM02/MM03

    Hi Experts,
    my requirment is that when see search values of ( F4) plant field in MM01/MM02/MM03 t.codes only avilable plant and name1 values . i need to display name2 values also. How i can search help of plant field should be enhanced.
    Regards
    Jaya

    Hi,
    You need to:
    1/ append ALV grid structure PLM_ALV_116 with field (in SE11)
    2/ in form WERKS_LISTE in include LMATEFLI you need to implement following modyfication selecting NAME2 for all the plants which are to be shown:
    FORM werks_liste.
    * convert into ALV list
      DATA: c_structure_name TYPE tabname VALUE 'PLM_ALV_116'.
      DATA: status_set TYPE slis_formname VALUE 'ALV_PF_STATUS1' .
      DATA: et_list TYPE TABLE OF gs_list_type_06 .
      DATA: l_et_list LIKE LINE OF et_list .
      DATA: l_seqwerk LIKE LINE OF seqwerk .
    * Prapering data to be display
    *  SET TITLEBAR  'TIT' WITH text-003. Note 821186
      G_titlebar = text-003.
      LOOP AT seqwerk INTO l_seqwerk  .
        MOVE-CORRESPONDING l_seqwerk TO l_et_list .
        APPEND l_et_list TO et_list .
      ENDLOOP .
    "-------->INSERT
      SELECT name2 FROM t001W
        INTO CORRESPONDING-FIELDS OF TABLE et_list
        FOR ALL ENTRIES IN et_list
        WHERE werks EQ et_list-werks.
    "<--------
    * Praper fields for ALV Disply
      PERFORM alv_list_fieldcat_create
            USING lt_fieldcat c_structure_name .
    * Diplay ALV list
      PERFORM alv_list_display TABLES et_list[]
                               USING  c_structure_name
                                      status_set
                                      space.
    ENDFORM.                    "WERKS_LISTE
    Regards,
    Marcin

  • Add a custom-field in the table MARC and manage it in MM01/MM02/MM03

    Good day to all of you!
    I have this task: To add a custom-field to the table MARC. This custom-field will be managed through the MM01/MM02/MM03 transaction as follows:
    In the Basic Data 1 or Basic Data 2 the custom-field data will be added. Let's say the field is MATNR OBSOLETE.
    I have searched and implemented the things in customizing: Made a copy of function group MGD1, added the field on the screen.
    MY PROBLEM! How to manage it??? When the user enters MM01/MM02/MM03 and update this field, the field should be updated in MARC.
    1. I am not sure that this custom-field should be on Basic Data1 or Basic Data2.They want it at plant level.
    2. How to manage the data transfer from SAP Standard Program and my Custom Function Group.
    PLs: Do not paste me link to sap technical site with that example, because there takes the custom fields and UPDATE a CUSTOM TABLE. I need to update MARC!
    All the documentations i have read until now tell you how to add the field, ONLY the first part of the SOLUTION.
    Any help, pls?
    Good day and thank you!

    Hi Alex,
    In which way you are trying to update that custom filed. Have you written any logic in EXITS/BADIS?
    http://pavelgk.pbworks.com/f/6729224-Implement-Screen-Exit-for-MM01-Adding-New-Fields-in-Screen.pdf
    and
    Just read the OSS note mentioned earlier.
    Symptom
    You want to integrate customer-specific fields in material master maintenance.
    Other terms
    SAPLMGMM, RMDATIND, ALE, CI_MMH1, EXIT_SAPLMGMU_001 
    Solution
    To add customer-specific fields to an existing material master table (such as MARA or MARC) , you can proceed as follows as of Release 3.0C:
          1. Use an append structure to add the fields to the required table in the Dictionary (this is not a modification; for details, see the SAP document "ABAP/4 Dictionary"). In Release 3.x, the length of the field names must be the same as  the standard five character fields. This is necessary because of dynamic assignments. As of Release 4.0A, the lengths of the field names can be longer than five characters. If the changes of the fields should be recorded in the change document and taken into account during ALE distribution, set the 'Change document-relevant' indicator for the corresponding data elements. For table MARA in Release 3.x, you must also enhance the database view MARU because the database changes are carried out using this view. This small modification is no longer necessary as of Release 4.0A because the database view MARU is enhanced automatically when you enhance table MARA or the include EMARA (which is the data part of table MARA).
          2. Enhancing online maintenance in customized material master maintenance:
          Define a subscreen with your customer-specific fields in a customer-specific function group created as a copy of the standard function group MGD1.
          In Customizing, assign this subscreen to a maintenance screen using the "Copy customized material master" function. For details, see the Implementation Guide (IMG). As of Release 4.0A, program COPYMGD1 is available. You can use this program to create customer-specific function groups as required. This program is also incorporated in the Customizing function 'Configure customized material master'. Ensure that each field of the subscreen has a field statement in the flow logic, otherwise the data is not transported correctly. You can use subscreen SAPLMGD1 2002 as an example.
          If you want these fields to be subject to standard field selection, you must add new entries for them to the central field table for material master maintenance (T130F): 
          Application examples for standard field selection:
          The field is mandatory and is to be flagged with a "?".
          The field belongs exclusively to the purchasing user department. Purchasing data and MRP data are both contained on one screen. However, the MRP controller is not to see the purchasing data.
          The following data is required for each field:
                a) Field name        (T130F-FNAME)
                b) Field selection group (T130F-FGRUP)
                Here, you should use a standard field group if the customer field is subject to the same field selection as the standard fields of the standard field group. If it is not, use a customer-specific field group.
                You must then check and, if necessary, modify the attribute of the field group using the function "Maintain field selection for data screens" in Customizing under "Logistics Basic Data -> Material Master".
                Field groups 111 through 120 that are not used in the standard system are reserved as customer-specific field groups. As of Release 3.0F, additional customer field groups are available. (For details, see the IMG).
                c) Maintenance status (T130F-PSTAT)
                List of the user departments that may maintain the field. You can display possible values by using the input help for the maintenance status field in the Customizing activity "Configure Material Master" when maintaining logical screens.
                d) Reference        (T130F-KZREF)
                This indicator must be set if the field from the reference material should be proposed during creation with reference.
    Note: You cannot yet use Customizing to enhance table T130F; you can use only transaction SE16 (Data Browser) or transaction SM31. Future releases will include a separate Customizing function for maintaining customer-specific fields. See Note 306966. By implementing this note you can add entries to table T130F within Customizing. This type of maintenance is possible as of Release 4.5B.
    You may change the entries for standard fields only with regard to the reference data and field selection group. Changing other data for standard fields constitutes a modification. Therefore, you cannot use the Customizing function "Assign Fields to Field Groups" to change this data.
    In addition, you must not add new standard fields to table T130F.
          3. If you want to maintain customer-specific fields using data transfer by direct input or via ALE distribution, proceed as follows:
          Add the fields to central field table T130F (see above).
          Add the customer-specific fields to the data structures for the data transfer (for example, BMMH1 for the main data).
          Also, add the customer-specific fields to the tables in which the incorrect data is stored during direct input. These tables have the same name as the corresponding master data table and also have the suffix _TMP.
          For example: If you add customer-specific fields to table MARA, you should add the same fields to table MARA_TMP.
          If you use ALE, you must also add fields to the IDoc. To process enhanced IDocs, you can use enhancement MGV00001 with customer exit EXIT_SAPLMV01_002 for creating the IDocs and customer exit EXIT_SAPLMV02_002 for posting the IDocs.
          Prior to Release 3.0E, enhancing structure BMMH1 constitutes a modification. In this case, you must add the new fields tot the end of the structure before the last field (SENDE = record end indicator).
          As of Release 3.0F, structure BMMH1 contains the customer include CI_MMH1, which is part of the enhancement MGA0001. Here, you must proceed as follows:
                a) Add the customer-specific fields to include CI_MMH1.
                The names of the fields in CI_MMH1 must be identical to those of the corresponding fields in material master tables MARA, MARC and so on.
                Important: The fields must be CHAR type fields. Therefore, create CHAR type data elements whose lengths are identical to the output length of your fields in  table MARA and so on. Use these data elements in include CI_MMH1, but use the field names from table MARA and so on.
                b) Activate include CI_MMH1.
                c) If you have not used customer structure ZMMH1 before, create it as a copy of structure BMMH1 and delete the standard fields that you do not require. You are not permitted to delete field STYPE and include CI_MMH1 when doing this. If you have already used structure ZMMH1, add include CI_MMH1 to it.
                d) Activate structure ZMMH1. This also adds the customer-specific fields to ZMMH1.
    Run program RMDATING. This program generates routines which are supplied to your customer-specific fields from the input file. As of Release 4.5A, you also need to activate the routines/function modules generated by program RMDATING (especially, the MAT_MOVE_BMMH1_XXXX modules). Details about this subject (especially the procedure when using customer structure ZMMH1) are described in the IMG for transferring the material data under item 'Maintain Transfer Structure'. Also, check the declaration of structure WA in program RMMMBIMC to see whether it is declared with sufficient length. If necessary, enhance the declaration (for the time being, this still constitutes a minor modification).
    In addition, lengthen domain DI_DATA with CHAR 5000. As of Release 3.1H, this has already been done.
    Important: When using customer-specific fields, you can use only structure ZMMH1 to transfer the data. Otherwise, after the next SAP upgrade which contains new standard fields in structure BMMH1, the input files no longer match. If you want these new standard fields to be transferred, add them after your customer-specific fields (the order of the fields in structure ZMMH1 does not need to be the same as the order of the fields in BMMH1).
    If you want foreign key dependencies or fixed domain values to be checked, or another check for a customer field, this is possible up to and including Release 3.0D only by modifying the corresponding check function modules. As of Release 3.0E, you can use function exit EXIT_SAPLMGMU_001 (SAP enhancement MGA00001) for these purposes.
    If you want to use engineering change management to schedule future changes for your customer-specific fields or you want to use the 'Display at Key Date' function, execute program GENERATE in addition. This program generates the necessary assignments for interpreting the change documents. With regard to engineering change management, you must read Notes 60281, 60973, and 48962.
    To date, it is not possible to integrate customer-specific tables in material master maintenance without making a modification. However, you can create customer-specific development objects containing the essential additional logic. You can then integrate these development objects in your system as part of only a minor modification.
    check this link. It may helps you to solve your issue.
    Thanks
    Sravan

  • Add custom field in MRP area-MRP 2 in material master(MM01/MM02/MM03)

    Hi
    As per my requirementn we have to add one field in the Material master(MM01/MM02/Mm03). Mentioned path below.
    MM01/MM02)--> MRP1 tab --> in the MRP areas > click on MRP AREAS button>Pop will come with MRP AREA --> double click on entry > MRP area screen will appear> In MRP2 data tab> i've to add a new custom field. Program Name> SAPLMD_MGD1
    Screen --> 0040
    Is there any exit/customization which can be used to do this?
    i was unable to find a exit for the same.
    Thanks,
    Gauri

    Hi Gauri,
    See Note 44410 - Integrating cust.-specific fields in matl master, I think that it will help you
    Regards
    Eduardo

  • How to activate the new fields on material master(MM01/MM02/MM03) for existing Materials

    Hi,
    We have a requirement to add  some custom fields as a new tab in additional data option(Descriptions, Unit of measure, etc.) in Basic data of Material master (MM01/MM02/MM03). I have successfully added and these custom fields and they are not part of standard(MARA, MARC) but a custom table and the updates are also done in custom table.
    For new materials, I can see the new tab in additional data screens of basic data view and I could successfully create/change/display using MM01/MM02/MM03. However I cannot see the new tab/fields for existing materials in the system in all 3 tcodes (MM01/MM02/MM03). This is not a main view in material master so that I can extend it by MM01.
    Is there any setting or mass generation program I have top perform so that I can see and maintain these new fields for existing materials. Appreciate any leads or help on this.
    Thanks,
    Harry

    Hello Harry,
    Goto t.code SPRO ---> Display IMG --->  Logistics - General --> Material master --> Configuring the material master --> Create program for customized screens
    Use the above path and create the screen and assign it to the sequence using the below link as reference.
    **************** - Tips - Implementing screen exits for MM01/MM02/MM03
    Regards,
    Thanga

  • Change the field description of a field in MM01,MM02, and MM03 Transaction

    Hi Experts,
    I had a requirement to change the field description of a field in MM01,MM02, and MM03. I know how to change the description of field in CMOD. In my requirement they need this new description only in the above mention transaction. So please let me know how we can do this?
    Regards,
    Ram

    Hi you can do this by SPRO transaction. Here you can copy the subscreen where you want the description of the field changed. And in the custom subscreen go to the Element list- >Texts I/O templates , Here you can change the description. After all this the customized subscreen is assigned in the proper sequence.  The step by step process is below:
    Step 1:
    Click on the button u2018SAP Reference IMGu2019. Then follow the path Logistics-General -> Material Master -> Configuring the Material Master. When this particular node is expanded, a drop down list of 7 different executable options appears.
    Step 2: Execute the option u2018Create Program for Customized Subscreensu2019
    Step 3: Copy the screens required to the custom function group.
    Step 4: In transaction SPRO, execute the option u2018Define Structure of Data Screens for each Screen sequenceu2019.
    Step 5: Now in transaction SPRO execute the option Assign Screen sequences to User/ Material Type/ Transaction/ Industry Sector.

  • Service for Object - MM01/MM02/MM03

    We have activated u201Carchive linku201D to ECM (IBM FileNet Application Connector for SAP® R/3® (ACSAP R/3) for business object for material master transactions (MM01/MM02/MM03), so the images associated with material master can be stored in FileNet repository.
    We will be using the SAP standard u201CService for Objectu201D functionality to store the image via create -> store business document.  We want to disable the u201CCreate -> Create Attachmentu201D because we donu2019t want the documents stored on the SAP content repository.   This is possible to do with either through configuration, security or user exit?  If yes, please specify how. 
    Additionally, please provide any security objects which we could utilize to control user from creating/changing /deleting the attached document.  Basically, we want some users to display the document but not alter them in any way.
    Thanks.

    Hi
    The authorization objects for attachment to material are as following:
    Object Class BC_Z Basis - Central Functions
    Authorization Object: S_BDS_DS  
    Authorizations for Document Set
    Authorization Field ACTVT :  30
    Authorization Field CLASSNAME:BUS1001
    Authorization Field CLASSTYPE:BO
    other ACTVT
    01     Create or generate
    02     Change
    03     Display
    04     Print, edit messages
    05     Lock
    06     Delete
    24     Archive
    25     Reload
    30     Determine
    70     Administer
    78     Assign
    82     Supplement
    Note: That to be able to attach user should have MM02 authorization..
    Best Regards
    Hope it helps

  • Additional tab in MM01/MM02/MM03

    Hi,
    I want to add new tab(i.e. like Basic data1 tab) in MM01/MM02/MM03 to enter some additional data. Please guide me how I can do it.
    Moderator Message: FAQ. Search before you post.
    Edited by: kishan P on Jan 19, 2011 4:36 PM

    Hi,
    Search SDN before posting a question. There are lots of threads on this topic.
    Have a look at this thread : Adding a new tab in MM01
    Read SAP Notes 38299 & 44410 as suggested in that thread.
    Thanks & Regards,
    Faheem.

  • Screen-Exit MM01/MM02/MM03 - Problems when I try to retrieve the data saved

    Hi guys,
    I created a Screen-Exit in the Accounting View of MM01/MM02/MM03 because I need to insert data into the fields of an Append Structure of the table MBEW, that I created.
    So, I can insert the data through an User-Exit. I Export to the Memory the data from my Screen-Exit and I modify the Fields content of MBEW inside of this User-Exit.
    I need to select these data and show it, because the selection is not automatic. I don't know if it could be automatic.
    Inside of the Screen-Exit there are some tables available, but they are empty and I can't retrieve the data because I don't have
    the Material Number nor other data of MBEW. When I run MM02, for example, the User-Exit is not started and so
    I can't export the data to the Memory and after that to select the data. This User-Exit is only started when I save the data...
    I found not any BADI too...
    Please, could someone help me?? How I could solve this question?
    Thanks a lot!
    Regards,
    Marcos Fernando Dotta

    Hello Marcos,
    Please see OSS note 44410 - Integrating cust. - specific fields in matl master.
    Kind Regards,
    Rae Ellen Woytowiez
    Link:  [https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=44410]

  • Additional custom field on mm01/mm02 screen

    hi all,
    I need to create an additional custom field on mm01/mm02 screen.
    value entered in this field will be updated in the database.
    Kindly give pointer to the user exit/ screen where i can create the custom field.
    thanks in advance

    Hi Manish,
    Do the following process step by step as specified in the following link.[http://www.****************/Tutorials/ExitsBADIs/MM/MM01.htm]
    But in this link while you are at the 11th step
    select your required view.
    and do the rest as usual.
    This is at the configuration level u can add your customer fields.
    I dont think there are any exits available that can fulfill your requirement as the same requirement is fulfilled at the customization level.
    Thanks.

  • Custom fields data in mm02/mm03 is not showing

    Hi,
      My requirement is to add custom fields to mm01 and update the database.but at the same time if i check the material in mm02/mm03 the custom field data also should show.
    iam able to update database.my custom fields data is not showing if iam checking in mm02/mm03.
    Please help me how can i do this.
    Thanks in advance,
    Neelima.N

    Hi folks,
      can u please help me out.
    By the following code i can able to display the data in mm02/mm03.but my problem is the last created customer field(model) data is showing for all the materials.
    for eg matnr-10 model -xx.
             matnr-20 model-yy.
      if iam checking in mm02/mm03 for matnr-10 model-yy it is displaying.in database it is updating correctly.
    can  u please tell me how can i write a code to select the zfield data for that particular material.
    Module get_data.
    if sy-tcode = 'MM02'.
        select single model into mara-model from mara
                  where matnr is not null.
    elseif sy-tcode = 'MM03'.
        select single model into mara-model from mara
                  where matnr is not null.
      loop at screen.
      if screen-name = 'MARA-MODEL'.
       screen-input = 0.
       modify screen.
       ENDIF.
      endloop.
    endmodule.
    Thanks,
    Neelu.
    Edited by: neelima natta on Feb 26, 2009 2:02 PM

  • Add custom field to MAKT to get a larger descritpion in MM01/MM02/MM03

    Hi, I already know how to add a new field to MARA and show/maintain it at MM01-03 transactions using this procedure (copied from another thread):
    Create the append structure on the MARA table.
    The SAP note 44410 describes how to add the new fields to the screen and how the updating will work.
    1. Make a copy of function group MGD1to ZMGDI as stated inthe Ossnote using program COPYMGDI.
    2. Goto Se38 enter program name SAPLZMGDI Click Display and goto> program-> other object---> enter screen number '0001' and add your fields to the subscreen which should apper on the the general data section of the basic data1 tab for the tcode MM01
    2. Make the changes stated in SAP Note.
    3. After make the changes the functional analyst will need to make some configuration changes.
    4. SPRO -> Logistic General -> Material Master -> Configuring Materal Master -> Define Structure of Data Screens Sequence.
    5. Select SSq = 21 then click on Subscreens select Basic DATA1
    6. Enter in the new screens that were built
    7. Change the row that was create putting in the program (function group program) that was created in step 2.
    But now, I need to add a language dependent description to have larger material description than MAKT-MAKTX. I've added the Z field to the MAKT table, generated the subscreen and copied the PBO and PAI from the screen 1002 (which is saving the MAKTX data). But it doesn't work and I'm not sure what I have to do...

    Solved by myself
    I write here the response because I didn't found it anywhere:
    When you are adding a custom field to MAKT table you have to add it to appending structres SKTEXT and DMAKT too because the standard uses them to read/write the data to MAKT. It's easy to do but hard to find out

  • Custom field not updating in MARC table by mm01/mm02/mm03

    Hi,
    I have created a sub screen in Plant storage 2 of MM01 tcode with a custom field.  The field is visible in the screen but the value is not getting updated in the MARC table.  We can update the MARA table through the exit of MPA00001 but there is no option for updating the MARC table.  Please let me know if there are any options.

    HI Geeta,
    Chek this
    DATA: H_ZE1MARCM LIKE ZE1MARCM.
    IF F_CUST_SEGMENT-SEGNAM EQ 'ZE1MARCM'.
      H_ZE1MARCM = F_CUST_SEGMENT-SDATA.
      IF H_ZE1MARCM-ZMYFIELD = C_NODATA.
        CLEAR H_ZE1MARCM-ZMYFIELD.
      ELSE.
        IF H_ZE1MARCM-ZMYFIELD IS INITIAL.
          RES_FIELDS-FELDNAME = 'MARC-ZMYFIELD'.
          APPEND RES_FIELDS.
        ENDIF.
      ENDIF.
      F_MARC_UEB-ZMYFIELD = H_ZE1MARCM-ZMYFIELD.
    ENDIF.
    Given By Lars,
    Regards,
    Madhu.

Maybe you are looking for

  • GATP:  Unable to check ATP (in GATP)  when creating sales order in R/3

    Issue:  When doing ATP check (sales order)  in R/3, I am able to see only availability screen of R/3 and not APO ATP screen.  In other words ATP check is performed in R/3 and not in APO (GATP). Simulation ATP check in APO works fine. Environment:  AT

  • RSS Feed in Maverick Mail

    Before I updated to Maverick, I was able to get rss feeds. Now I can't. Any help or insight?

  • DB2 SQL syntax

    in Sybase/SQL server, you can do conditional compound SQL like following: begin transaction begin insert into blah values ("blah") if(@@rowcount>0) begin update blah set blah = "blah" where blah = "blah" end end commit transaction;Does anyone know to

  • Accessing the Related components service

    Hi All, I installed the Related content component from stellent/oracle on the content server and works fine on the content server. Now I want to integrate this with my Front End. I am already using CIS APIs getFile and searchResults. I am trying to c

  • Why do I not see my PSE6 slide shows in the PSE8 organizer?

    When I open my Organizer in PSE8, the slide shows that I thought I transferred from PSE6 on my old computer show up in Organizer as a blank image with an hourglass in the middle.  Nothing happens when I double-click on it.  What did I do wrong and ho