Add Interface mapping to Receiver Determination is not possible

Hello,
I create some scenarios from R\3 to BW and R\3 to File.
When I want to add Interface mapping to Receiver Determination is not possible.
Not to choose from list and not with copy and paste.
Any ideas?
Regards
Elad

Hi Elad,
Just check whether ur interface mapping that u defined in IR is activated properly or not.It will be present in the hit list as soon as u click the help button of the interface mapping of the interface determination in the ID.
Regards,
Prasanthi.

Similar Messages

Error: com.sap.engine.interfaces.messaging.api.exception.RetryControlException: Receiver Determination did not find any receivers at all

Hello,
I have an issue configuring a simple File Adapter Content Conversion, it will be great to give me some support as I'am new in the PO Environment.
Iam reading a flat file and trying to write into an XML in the same FTP server
I have a 1 to 1 Mapping as follows
And my Content Conversion at Sender side Looks like this
After running the configuration Iam getting following error message
Error: com.sap.engine.interfaces.messaging.api.exception.RetryControlException: Receiver Determination did not find any receivers at all
My System is the SAP Netweaver Process Intgration 7.4 single Java stack
Do you have any idea how to fix this issue?
Many thanks in advance
Khadim

Hi evrybody
I have enabled the tracing of ICO and have seen that my payload for the message mapping is ok,.
<ns:hartgeldbest_ERP_KT xmlns:ns="http://xxxxxx.de">
<Recordset>
<header>
     <gesellschaft>03</gesellschaft>
     <filiale>000</filiale>
     <satzart>11</satzart>
     <datum>00000000</datum>
     <kennzeichen>1</kennzeichen>
</header>
</Recordset>
</ns:hartgeldbest_ERP_KT>
The issue is on detrmining the RECEIVER in the Main-XML
<sap:Main xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" xmlns:sap="http://sap.com/xi/XI/Message/30" versionMajor="3"versionMinor="1" SOAP:mustUnderstand="1">
<sap:MessageClass>ApplicationMessage</sap:MessageClass>
<sap:ProcessingMode>asynchronous</sap:ProcessingMode>
<sap:MessageId>ae41678e-da87-11e3-cd0f-0000006831a2</sap:MessageId>
<sap:TimeSent>2014-05-13T10:16:43Z</sap:TimeSent>
<sap:Sender>
<sap:Party agency="http://sap.com/xi/XI" scheme="XIParty"/>
<sap:Service>CC_Hartgeldbest_File2Idoc</sap:Service>
</sap:Sender>
<sap:Receiver>
<sap:Party agency="" scheme=""/>
<sap:Service/>
</sap:Receiver>
<sap:Interface namespace="http://xxxxx.de">hartgeldbest_KT_async_out</sap:Interface>
</sap:Main>
Is it possible that the receiver is overwritten due to the Content Conversion? Because if I set my Message Protocol to "File" the receiver determination will work.
Any idea?
Thx
Khadim

IDoc TO File: Receiver Determination did not find any receivers at all

Hi,
We have IDoc to file scenario, where based on attributes present in IDoc we have configured different receivers.
Everything was working fine and files were getting created based on the receiver determination criteria.
But there is one change done in custom IDoc to re position the attributes.
Idoc before changes was having NAME1 and NAME2 above KATR6 and KATR7 and after change it looks like below:
So there is no change in segment and no change in mapping but the attributes KATR6 and KATR7 are used to determine the receiver.
Cache refresh is done for both ESR and ID. I have re - entered the receiver determination criteria just to ensure that change should reflect.
But still when I am triggering outbound IDoc from ECC to PI, the transaction is getting errored out with below error:
"ErrText": "Processing error = Receiver Determination did not find any receivers at all",
Can any one providee some idea what could be the reason and what is the right approach to resolve this issue.
Thanks,
Vertika

Hi Krupa,
I have marked your answer as helpful answer and delete of metadata wasn't required.
Reload works . But thanks for your suggestion.
Thanks,
Vertika

Mapping for ND_FORM to ND_FORM not possible due to recursion

Hi Experts,
I am trying to define external context mapping...with the steps..say there are two components ZOMP1(in which i am using other component) and ZCOMP2(this is used in zcomp1)
1. IN the component zcomp2 I define ZCOMP1 under the used components
2.in the component controller of ZCOMP2 under properties tab I create controller usage of zcomp1 and two entries are created
3.I go to the context tab of component controller of zcomp2 and drag and drop the ND_FORM node from ZCOMP1 to context node of ZCOMP2
when I do a check I get the error
Mapping for ND_FORM to ND_FORM not possible due to recursion
Don't understand why am I getting this error though the node I am trying to map is not recursive?
This is what I see in long text of error:
Message no. SWDP_WB_TOOL263
Diagnosis
Mapping from ND_FORM to ND_FORM is not permitted, as ND_FORM has its own mapping that refers directly or indirectly to ND_FORM.
System Response
The mapping can neither be created nor used.
Procedure
If you receive this error message when you check a context or when you update the mapping to context node ND_FORM, delete the mapping to ND_FORM using the context menu function with the same name.
Please help,
Anubhav

Hi Anubhav,
following restrictions apply on recursion nodes:
1. You cannot nominate a recursive node to act as the data source in a context mapping relationship. Recursive node structures are restricted to the scope of a single controller.
2. The root node of a context cannot be used for a recursion.
Please check this...
http://help.sap.com/saphelp_nw04s/helpdata/en/47/45641e80f81962e10000000a114a6b/content.htm
Also Cehck This,..
Enhancement FPM of Trip application
Cheers,
Kris.

Batch determination is not possible because there is no search procedure

Hello Friends,
In Consignment issue delivery document facing error 'Batch determination is not possible because there is no search procedure",please tellm ehow to resolve this.
regards,
Nitin M.Pawar

In IMG > Logistics - General > Batch Management > Batch Determination and Batch Check > Batch Search Procedure Allocation and Check Activation > Allocate SD Search Procedure/Activate Check.
Here maintain the config as per the system requirements.
Best Regards,
Ankur

Receiver Determination: Sender not found is in

Hi,
I am getting a "message incomplete: no sender found" error, in a synchronous step from a BPM(The intended receiver is another BPM which is in a separate namespace & SWCV). The message interface for the send step is also in a different namespace & SWCV.
I tested the call to the target BPM(with the same message interface) using a tester BPM and it was working fine. However both were in the same namespace.
I couldnot find any reason other than to think about the namespaces being different.
I have defined the dependencies between the SWCV's and have imported those into the Integratoin builder.
suggestions/leads/hints will be most appreciated...
Thanks & Regards,
Renjith.
Now we have got a little more clarity on how the error occurs. Let me explain the steps in BPM -
Step1 Receive MSG1
Step2 Map MSG1 to MSG2
Step3 Send ASYNC MSG2
Step4 map MSG2 to MSG3
Step5 Send Sync MSG3
and so on...
In this case the Step5 send sync msg3 fails and i get the error back - "Message is incomplete. No Sender found" - during receiver determination.
If i were to remove the step3, send msg3 async, everything works like a charm....Has anyone got an idea why this is happening?
Message was edited by: Renjith Andrews

Hi Priyanka,
Thanks for the response.
The step 3 was executed successfully and i can see the file in the output folder. It was not failing.
As for step5, it never got till recevier determination because the error was that the sender information was missing.
Thanks & Regards,
Renjith.

Receiver determination is not showing communication channel

HI, I am working on file adpater scenario. I have created communication channel and later deleted it. Then created new communication channel and completed other steps like - creating- receiver determination and interface determination. But when I am trying to create Receiver agreement , I am not getting the new communication channel in selection list. Its showing old communication channel that i created and deleted. There are no entries to activate in Change list and cache refresh also working fine.
Please let me know why its showing old comunication channel, instead of new one.

Dear rajaram,
I found two chances to have the above mentioned situation.
[1]. You have deleted the channel from the scenarios and Change lists, But you may find the same in the Objects Tab[between the Change LIst tab and Scenarios Tab].
[2]. The second chance is that you may created the channel with the conflict on the 'Sender' or 'Receiver'. Check the second one. I believe the second one made this probelm
regards
Neo
<i>reward me, if found useful</i>

Condition editor in receiver determination does not show payload fields

Hi !
We are trying to create some conditions for the receiver determination in a RFC->XI->File scenario, but when we open the condition editor, under the XPATH option we do not set any payload fields to create conditions!!
Any clues?
Thanks,
Matias.

Hi,
Check in SLD if your software component is installed on your business system and then clear SLD cache in ID.
You will see interfaces assigned to your business system and also the payload fields in condition editor
Thanks,
Beena

XI - Receiver Determination Condition not working

I created a Condition on my Receiver Determination to stop some messages from being sent based on a field in our message.
It works when using some test tools (workbench, SOAPUI, etc) but not when coming from our MDM system. The beginning of the input message looks like what is listed at the bottom of this message(and it works).
But when coming from MDM the one node looks like this - there is no colon ( after the xmlns.
               <YMDMB_CREMDM xmlns='http://intel.com/MDM/BUPA/Vendor'
without the colon ( the condition does not work; with the colon it does work.
the sending system is not able to add the colon.
Does anyone know why the colon matters and what we can do to get around it in XI ??
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
<YMDMB_CREMDM xmlns:='http://intel.com/MDM/BUPA/Vendor' xmlns:xsd='http://www.w3.org/2001/XMLSchema' xmlns:soapenv='http://schemas.xmlsoap.org/soap/envelope/' xmlns:xsi='http://www.w3.org/2001/XMLSchema-instance'>
   <IDOC BEGIN='1.0' xmlns=''>

below is the beginning of the XSD from the IDOC (it is custom but based on a SAP one - just added a few fields)
I also put the start of the input message below that.
also to make sure I was clear, if all we do is change this node of the input message by adding a colon after the xmlns everything works.
               <YMDMB_CREMDM xmlns='http://intel.com/MDM/BUPA/Vendor'
thanks
begging of XSD from IDOC
<?xml version="1.0" encoding="ISO-8859-1"?>
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema">
     <xsd:element name="YMDMB_CREMDM">
          <xsd:complexType>
               <xsd:sequence>
                    <xsd:element name="IDOC" type="YCREMDM.YMDMB_CREMDM" />
               </xsd:sequence>
          </xsd:complexType>
     </xsd:element>
     <xsd:complexType name="YMDMB_CREMDM.E1BPADTTX">
here is beginning of input message
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
<YMDMB_CREMDM xmlns='http://intel.com/MDM/BUPA/Vendor' xmlns:xsd='http://www.w3.org/2001/XMLSchema' xmlns:soapenv='http://schemas.xmlsoap.org/soap/envelope/' xmlns:xsi='http://www.w3.org/2001/XMLSchema-instance'>
   <IDOC BEGIN='1.0' xmlns=''>

Receiver Determination-Condition not working

Hi all,
It is simple iDoc to File scenario. I have two receivers based on a condition in the receiver determination. I am getting all data into both receivers without executing the condition.
Below is the condition. Any idea why this is not being executed? Thanks for your help.
(/ZGENERIC_OUTBOUND01/IDOC/Z1GENERIC_SDATA/SDATA = '1C')
(/ZGENERIC_OUTBOUND01/IDOC/Z1GENERIC_SDATA/SDATA = '1B')

>   <?xml version="1.0" encoding="UTF-8" ?>
> - <ZGENERIC_OUTBOUND01>
> - <IDOC BEGIN="1">
> - <EDI_DC40 SEGMENT="1">
>   <TABNAM>EDI_DC40</TABNAM>
> ......
> ......
>   </EDI_DC40>
> - <Z1GENERIC_SDATA SEGMENT="1">
>        <SDATA>1C</SDATA>
>   </Z1GENERIC_SDATA>
> - <Z1GENERIC_SDATA SEGMENT="1">
>        <SDATA>1C</SDATA>
>   </Z1GENERIC_SDATA>
> - <Z1GENERIC_SDATA SEGMENT="1">
>        <SDATA>1B</SDATA>
>   </Z1GENERIC_SDATA>
>   </IDOC>
>   </ZGENERIC_OUTBOUND01>
You cannot have both the conditions in same IDOC at the same time. Like here in the above example you have 1C & 1B both, so in this situation it will not work.
Just for testing either remove 1C or 1B and then test. I am sure it will work.
You cannot send the same payload at the same time based on two different conditions to 2 different receivers except you put 'OR' in your conditon for 1C & 1B. But in this situation message will go to both of the receivers which you don't want here.
Regards,
Sarvesh

Warning received "It was not possible to finish your purchase"!...

"I re-installed my Angry Birds Apps on my new iPad 3 (IOS 7) (Gratuit downloads) with my Apple ID and password but when I tried to buy additional items (e.g. Tournament Pack for angry Birds Friends) I received the warning that "It was not possible to finish your purchase. For help, please contact iTunes support".
However, I checked my Apple/iTunes Account details and they are all in order, including my credit card details and phisical address.
Can someone please assist?
Thank you.

Contact Apple Customer Service.
1-800-676-2775

Receiver determination did not find any receiver at all while using ICO

Hi Experts,
I'm getting this error in one of our sender SOAP channels. It's Web Service (SOAP) - PI - Proxy (SOAP) scenario using ICO. Have you come across this problem before? What should I check?
Thanks in advance.
Mahi

Check for Nicolas reply in the below thread.
http://scn.sap.com/thread/3205324
Don't select anything under swcv->

Automatic batch Determination:Batch determination is not possible

Dear Guru's,
I have ticked the automatic batch determination in the item categories.
Defined the records for the batch determiantion: in VCH1.
i have assigned the Batch Determination --> in the Logistics General.
But in the Order Screen : when I go to the batch management ..The system says : The strategy contains no selection specifications".
Where can I set up automatic batch determination at sales order level ?
Anu Solutions GURU's!
Edited by: EXPLORING MULTIDIMENSIONAL SAP on Aug 18, 2008 10:44 AM

Hi,
With the following settings, the batches are selected the moment
1: Set up batch determination the way that the batches in batch selection are sorted the right way. e.g. sorted by expiry date
2: Use automatic batch selection in disp view.
A1) Normaly we use batch determination at delivery level, because at the time of order material may or may not be created.for this material should be configured with batch and batch determination should be checked in sales views of material.
A2) Batch Determination during order Creation.
For this you need to maintain a Classes d for you Material. Depending on the Manufacturing process you can define the characteristics for your material.
You need to create a class (You might have to create a new class type) which incorporates the characteristic.
First Create the Characteristic Using Ct04 and then using Cl02 create the Class including this characteristic.
Then in your material master Classification View Enter this class.
Then Create a Batch for the particular plant and Stor Loc using MSC1N.Give the value of the characteristics in this batch.
Then go to SPRO ->Logistics General ->Batch Management and maintain the Condition Technique (Procedure, Strategy Types and assignment to sales docs etc).
Then Create the Batch Determination Record using VCH1.
Please try and come back.
Regards,
R.Brahmankar

Need of creating receiver determination and interface determination

what is the need of creating interface determination where as providing all the details in Receiver determination?

Hi,
The loose coupling between the Interface mapping and receiver determination have provided the compatibility for reusability.
The Interface determination maintained and just linked to receiver determination so you could have multiple receiver determinations with common interface determination or vice-versa.
If you provide all the information in receiver determination then, it would be very dfficult to have the various mappins for multiple receivers maintained in receiver determination.
Interface determination is applied at runtime to all messages to be processed. Thus from security point of view of transaction of data. its preferable.
Thanks
Swarup

How enhanced receiver determination works..?

hi all,
In enhanced receiver determination Interface mapping(which has java mapping) I have also included logic to make some change in content of input file and dynamic configuration for output file name. My input and output are flat files. So I m using dummy structure. In interface determination i m not referring any Interface mapping.
Receiver determination is working properly But neither dynamic file name nor the changes in content of file are reflecting in out put file.
Is it mandatory to use separate mapping in interface determination to change the content of file and dynamic file name?
Thanks
Jai
Edited by: Jaideep Baid on May 29, 2010 6:27 PM

Is it mandatory to use separate mapping in interface determination to change the content of file and dynamic file name?
The mapping used to in receiver Determination is to decide the Receiver.....the mapping used in Interface Determination is to create the target structure....both are to be developed and used separately (one in Receiver Determination and other in Interface Determination respectively)....this wiki gives you an example:
http://wiki.sdn.sap.com/wiki/display/SI/StepbyStepguidetoExplainEnhancedReceiver+Determination
Regards,
Abhishek.

Add Interface mapping to Receiver Determination is not possible

Similar Messages

Maybe you are looking for