Add new email header line and add Bcc recepient to this additional header.

Hi Folks,
iMS5.2p1, Solaris 8.
Just after a few directions. I have a 'catch-all' mbox, that customer POP's. The customer then uses MDaemon to deliver email, based on rules to correct recepients, works fine until a Bcc comes in, as quoted below.
Why doesn't MDaemon parse the BCC header?
BCC only works with SMTP mail. By definition, the carbon copy is "Blind".
There are no headers in the message which can be parsed using the POP3 method that would provide the address. The only hope for these kinds of messages is to get the ISP to stamp the message file with the delivery information from the SMTP session during delivery to the ISP. For example, when the person sends the BCC message to the ISP hosting the mail, some of them stamp a header called "Deliver-To:" into the message. MDaemon could pick up on such a header if it existed.
I know I would have to tackle this with either a re-write/mapping/conversion, but not sure what the best approach, ie to add and rewrite the Bcc, recepient into the new 'Deliver-To:' header.
Any good solutions/tips ?
Cheers folks.

Hi Jay,
Sorry if there is any confusion. The customer at his premises has a server running this mail app. called MDaemon, which uses filters to deliver to local mboxes for their users. The customer in question just wanted a 'catch-all' mbox with iMS for his domain (which we host), to just POP3 this mbox and then the customer's MDaemon app, parses through filters to deliver to correct local mbox. They didn't want to have each user's mbox hosted on iMS....as yet anyway, thus the need for 'catch-all' delivery of email for the customer domain to one iMS mbox.
The problem is with any Bcc email for customer's domain. As described POP3 as per definition hides the Bcc line, thus MDeamon filters at customer end will fail delivery to intended recepient. Thus the doco from MDaemon as explained to me from the customer can handle additional header lines and parse that way. Thus the need to add the recepient in the Bcc line to an additional header (ie. Deliver-To: [Bcc smtp recepient]). Then as MDeamon doco says it can be setup to parse and deliver to correct local mbox. I hope that my be a little clearer.
So I need to on iMS rewrite any Bcc recepient for customers 'catch-all' mail domain and add another header line (ie. Deliver-To: [Bcc smtp recpient]). So when customer POP's iMS mbox, Mdeamon at customer's end will parse and deliver locally.
Hope that makes sense and the best way to add an additional header and take the original Bcc line and add to to new header is.....hopefully a pointer from your good self.
Cheers.

Similar Messages

  • Add new email address button and tool bar no longer appears.

    Was adding email addresses and for some reason the address tool bar and add new address button disappeared. Without them I can not add any more email addresses.

    Thanks for the help. F-10 got the menu up so I could turn on the address book tool bar.
    Best,
    John

  • Exchange 2010 add new email address space and additional smtp address to all recipients

    HI
    Our company is being bought and we need to change the email address for every recipient within the business group/user.
    I have added the new domain to the Accepted Domains and have confirmed that if I manually change a users smtp address that mail flow works and the postmaster account receives email.
    looking in the E-mail address policies section within the EMC we currently have 2 polices one for the current company policy call company.co.uk with a priority 1 and one called Default policy.
    when I try to edit these I get a warning message which states that this policy was created with an earlier version of exchange I have looked on our exchange 2003 environment and have found the polices and can edit them.
    Now my questions are 
    1. should I create the policy on the exchange 2003 environment or 2010
    2. if I create a new policy on the exchange 2010 environment what will happen to the old addresses?
    3. I must be able to preserve the old addresses and must make the new address space the primary address?
    if anyone could help with the steps required or if there are any gotcha to avoid.
    thanks

     1. should I create the policy on the exchange 2003 environment or 2010
     You have to create in Exchange2010
    2. if I create a new policy on the exchange 2010 environment what will happen to the old addresses?
    Email address policy will change the email address if applied immediately except for the users which has "Automatically update email addresses based on e-mail address policy" option turned on
    You will get the list of users with "Automatically update email addresses based on e-mail address policy" option turned off by the below command.
    Get-Mailbox -ResultSize Unlimited | Where {$_.EmailAddressPolicyEnabled -eq $False}
    3. I must be able to preserve the old addresses and must make the new address space the primary address?
    Yes but you can keep only one as replying address.
    Please keep both address in the email address policy to preserve old email address to the users.
    If you want an autoreply, then use a hub transport rule in Exchange an Outlook rule and allow auto-replies to the internet. (auto-replies to the outside network is not a good idea)
    Here is a similar case
    http://exchangeserverpro.com/email-address-policies-in-mixed-exchange-20032007-organisations/
    Thanks, MAS
    Please mark as helpful if you find my comment helpful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you.

  • Unable to reset or add new email addresses on HP Officejet Pro 8600 Premium e-All-in-one N911n

    Unable to reset or add new email addresses on my HP Office jet J4680

    Hi johndavis196,
    Welcome to the HP Support forums.  I see that you are trying to add new email addresses to your Officejet J4680 printer.
    To better assist you, would you please provide some additional information:
    How is the printer connected (USB cable, ethernet, or wireless)? The Officejet J4680 supports all three methods.
    What operating system are you using on your computer (Windows 7, Mac 10.8, or Windows 8, etc)?
    Where are you trying to update the email addresses?
    Are you encountering any error messages? If yes, what is the error message and where is it displayed (printer or computer)?
    What steps are you taking before you are stopped?
    Thank you.
    Regards,
    Happytohelp01
    Please click on the Thumbs Up on the right to say “Thanks” for helping!
    Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
    I work on behalf of HP

  • How to add new price break lines to existing PO quotations?

    Hi,
    I am using a custom interface (to insert quotations data into PO headers/lines interface tables) and PO documents open interface to create PO Quotations in Oracle.
    I need to modify this interface to:
    1. Update existing price break lines for a quotation line.
    2. Add new price break lines to existing quotation line(which may/may not have exsiting price break lines).
    Please let me know:
    1. What modifications need to be done to the existing code.
    2. What values needs to be passed to the action columns in PO_HEADERS_INTERFACE and PO_LINES_INTERFACE for above scenarios?
    Any ideas/help will be appreciated.
    Thanks
    Imran

    Hi Imran,
    I have done a similar exercise for BPA price breakup.. Let me know if you need that as reference. I can share that :).. Please provide your personal mail id..
    Regards,
    S.P DASH

  • Add new column at line item level in MIR7 transaction

    Hi All,
        I would like to know how to add new column at line item level for GL Account
       tab  in MIR7 transaction. could you please let me know how do i add new
       column in MIR7  transaction. Please let me know is there any user exit or any
       other wat to do it.
    Thanks,
    rao

    Hi,
    The customer include CI_FMBL can only be used with FMPEP and not with other transaction like FMBB.
    Technically speaking, the structure CI_FMBL must be part of many other interfaces like the one use by BAdI 'FMKU_BUDGET_EVNT'.
    In order to add such customer fields in FMPEP, you have to use the BAdI 'FMBW_CUSTOMER'. For instruction, you have to look at the note 1356725 and the instruction of paragraph 30. Please read the instruction and start to do your implementation.
    With the BAdI 'FMBW_CUSTOMER', you can use the PBO and PAI for handling the customer fields. There is no other place to populate these customer fields. Do you want to use customer fields in FMPEP? Please check note 1356725 for reference.
    I believe this answer your inquiry.
    Best Regards,
    Vanessa Barth.

  • Why "New Item" in ribbon and "Add new item" in xsllistview link to different form

    Hi all,
    I have a question. I have a list with two new forms, one is created in SPD the other one is created in InfoPath (both forms are created by developer).
    I don't know why the new form link to different page when I click "New Item" in ribbon and "Add new item" in list view.
    1. Will open new form that created in InfoPath when click on "New Item" in ribbon.
    2. Will open new form that created in SPD when click on "Add new item" in list view.

    One way to do this would be to hold the urls for the pages you need to display in a table. You could then build the links as one of the columns of a report using some fancy SQL.<br>
    <br>
    Or you could make a simple function to return the correct link based on the relevant parameters:<br>
    <br>
    create or replace function get_url (p_criteria in varchar2) return varchar2<br>
    is<br>
    lv_url varchar2(500);<br>
    begin<br>
    if p_criteria = 'Personal' then<br>
    lv_url := 'http://host:port/pls/portal/etc...';<br>
    end if;<br>
    etc...<br>
    return '&LT;a href="' || lv_url || '"&GT;' || p_criteria || '&LT;/a&GT;';<br>
    end;<br>
    <br>
    Your report could then include the function as one of the columns in your report.<br>
    Not very elegant but it should do the job.
    Patrick.

  • How to add new currency in ORCO and ORBO

    Hi, I have successfully install ORCO, ORBO and ORPOS. I followed Implementation Guide, Volume 1 – Implementation Solutions to add new currency in ORPOS.
    But I still do not know how to add new currency in CO and BO.
    I try to use import parameter feature in ORCO and ORBO to import xml, the result said "Success" but there is no changes.
    Please help show how I could achieve this.

    I change the FL_CNY_BASE into 1 already. POS is OK now. But BO is not regconize that there is a new currency. I'm trying to go to
    Admin -> Job Manager -> Available Import -> Import BackOffice Parameters
    and try to import xml file that contain belowing content.
    <?xml version="1.0" encoding="UTF-8" ?>
    <CurrencyImport xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="CurrencyImport.xsd" Priority="0" FillType="FullIncremental" Version="1.0" Batch="1" CreationDate="2001-12-17T09:30:47.0Z" ExpirationDate="2027-12-17T09:30:47.0Z">
    <!-- Example of adding a Currency. -->
    <Currency ChangeType="ADD" ISOCode="MYR" IssuingCountryCode="MY" Name="MYR" IssuingCountryNationality="Malaysian" IsBaseCurrency="true" Scale="2" Priority="0" />
    <ExchangeRate ChangeType="ADD" CurrencyCode="MYR" MinimumAmount="0.00" EffectiveDate="2008-05-26" ExpirationDate="2050-06-02" ToBuyAmount="2" ToSellAmount="2" ServiceFeeAmount="0.00" />
    </CurrencyImport>
    The result said it success but I still cannot see any change.
    Is there is any other things I should make change at BO? Any property file that I should make change? BO and CO is web application so the structure of files are not the same as POS. I can't following the same thing when I had made with POS for BO and CO.
    Thanks for you helping

  • Header line and work area

    Hi,
    can anyone please explain me wht is the difference between header line and work area???

    Hi,
    INTERNAL TABLES
    - Internal tables are used to obtain data from a fixed structure for
    dynamic use in ABAP.
    - Each line in the internal table has the same field structure.
    - The main use for internal tables is for storing and formatting data from
    a database table within a program.
    WORK AREAS
    - Work areas are single rows of data.
    - It should have the same format as any of the internal tables.
    - It is used to process the data in an internal table one line at a time.
    Internal Tables with Header Line : Here the system automatically creates the work area. The work area has the same data type as internal table. This work area is called the HEADER line. It is here that all the changes or any of the action on the contents of the table are done. As a result of this, records can be directly inserted into the table or accessed from the internal table directly.
    Internal Tables without Header Line : Here there is no work area associated with the table. Work area is to be explicitly specified when we need to access such tables. Hence these tables cannot be accessed directly.
    HEADER LINE----
    CREATED EXPLICITLY------
    1.Internal table created by referring to another table
    Syntax: Data <f> <type> with header line.
    <type> refers to a table data type or table data objects using type or like.
    Here internal table <f> is created of the type <type>.
    Example:
    DATA t_line TYPE line OCCURS 10 with header line.
    2. Internal table created by referring to existing structure
    Syntax: Data<f> <type> occurs n with header line.
    The lines of the internal table <f> have the data type specified in <type> (Can use either like or type).
    Example:
    DATA flight_tab LIKE sflight OCCURS 10.
    CREATED BY DEFAULT---
    3. Internal table created With a new structure
    Syntax: Data : Begin of <f> occurs <n>,
    <component declaration>,
    End of <f>.
    Work area is created by default.
    Example:
    Data : Begin of itab occurs 10,
    column1 type I,
    column2(4) type C,
    column3 like mara-ernam,
    End of itab.
    reward if useful
    Regards

  • Reset Password email:  subject line and body

    For an email that is sent from this page:
    Home>Manage Workspaces>Manage Developers and Users>Reset Password
    Question: Where/how can I change the subject line and message-body contents for this email

    I would like to customize the subject line and body. for example...
    Current Email:
    Subject: Your password has been changed.
    Body: Account password changed for user CXXXXX.
    I would like to modify to:
    Subject: Your 'Oracle Application Express' password has been changed.
    Body: 'Oracle Application Express' Account password changed for user CXXXXX

  • Diff between header line and work area.

    Diff between header line and work area.

    Hi,
    These are table with header line.
    DATA: T_TABLE type table of <table_name> with header line.
    data: begin of t_table occurs 0,
                  field1 type ...
                  field2 type ...
                  field3 type ...
          end of t_table.
    <b>The result is:</b>
    <u><b>TABLE</b></u>    
    FIELD NAME  |FIELD1|FIELD2|FIELD3|  
    HEADER LINE |EE1   |EE2   |EE3   | <---- Line 5 content
               1|AA1   |AA2   |AA3   |  
               2|BB1   |BB2   |BB3   |  
               3|CC1   |CC2   |CC3   |
               4|DD1   |DD2   |DD3   |
               5|EE1   |EE2   |EE3   |
    These are table without header line.
    DATA: T_TABLE type table of <table_name>.
    DATA: T_TABLEX LIKE TABLE OF t_table.
    <b>The result is:</b>
    <u><b>TABLE</b></u>    
    FIELD NAME  |FIELD1|FIELD2|FIELD3|  
                     0|---   |---   |---   | <---- No header Line
                     1|AA1   |AA2   |AA3   |  
                     2|BB1   |BB2   |BB3   |  
                     3|CC1   |CC2   |CC3   |
                     4|DD1   |DD2   |DD3   |
                     5|EE1   |EE2   |EE3   |
    These are work areas:
    Tables <table>.
    DATA: wa type <table>.
    DATA: wa like t_table.
    DATA: wa type line of <table>.
    <b>The result is:</b>
    <u><b>WORK AREA</b></u>  
    |EE1   |EE2   |EE3   | <---- Content
    Regards.
    Marcelo Ramos

  • How do I change my user name in syn? I typed in the wrong email address. And I cancelled syn thinking this may work but no luck.

    How do I change my user name in syn? I typed in the wrong email address. And I cancelled syn thinking this may work but no luck.

    You have to clear saved password for this page:
    # Open you login page (where you have to enter username and password).
    # Right click on page and select '''Page Info''' form context menu.
    # On last tab ('''Security''') there is '''View saved passwords''' button, click it and delete all saved passwords for this page.
    # Also clear all related cookies (just in case) there is button for this next to first one.

  • Hi There for the last few days I can log into Icloud on my pc but I can't action anything. I can see the emails but cannot view them. I cannot compose a new email.. I don't know if this is icloud or my pc? Its working fine when I access on my iphone..

    Hi There
    for the last few days I can log into icloud via icloud.com on my pc but I can't action anything.
    I can see the emails but cannot view them. I cannot compose a new email.. I don't know if this is icloud or my pc?
    Its working fine when I access on my iphone.
    many thanks
    Cherry

    Just realised its fine through internet explorer but its Mozilla.. so assuming an issue with my browser?

  • HT1918 itunes hooked up to an e-mail no longer good tried to chg and add new email but it show system set me up with new account instead of updating new email need to merge and use the current email with old account

    I have had itunes for years, however, old account was setup under [email protected] and I no longer have that e-mail or ATT internet service so everytime I want to update my e-mail account with my new [email protected] it wll not let me because I tried to update from my itues account and just changed the e-mail id field and it allowed me to update however it actually just made me have another seperate account under my current e-mal.
    I need to merge the two how can  I do that now that this system has me as two different accounts. One is Tracy Rucker the other one has all of my names
    Tracy Randle Wlliams Rucker?
    Help please no verication e-mails can be verified with the old sbcglobal.net account

    In iTunes, do Store->View my AppleID
    Click "Deuthorize ALL"
    Then, on any computers you still have, do Store->Authorize this computer.  If there are less than 5, you will have no problem.
    You can only do "deauthorize all" once a year, so in the future, if you ever throw a computer away, remember do to "Store->Deauthorize this computer" first.

  • How to add new email id in sumbit event

    Hi all ,I am using Adobe life cycel designer ES2.Currently we are using a pdf form for getting hiring information .
    The need is while clicking the submit button of the form i would like to send the attached pdf form to two new mail ids.
    Am using this syntax to send to one person
    this.resolveNode("#event").submit.target
    = mailto:[email protected]?subject= Smart Form Hires (for Action Reason NHR)&body=NOTE TO HR: \n Please do not change the Subject line \n Remember to also attach Employee Data Form for a New Hire transaction;
    How to modify to add another email id?
    kindly help me,Thanks in advance.vidhya.

    Welcome to the Apple Community.
    Firstly, you need to change your details with Apple,  Start here, change your country if necessary and go to manage your account.
    In order to change your Apple ID or password for your iCloud account on your iOS device, you need to delete the account from your iOS device first, then add it back using your updated details. (Settings > iCloud, scroll down and hit "Delete Account")
    Providing you are simply updating your existing details and not changing to another account, when you delete your account, all the data that is synced with iCloud will also be deleted from the device (but not from iCloud), but will be synced back to your device when you login again.
    In order to change your Apple ID or password for your iCloud account on your computer, you need to sign out of the account from your computer first, then sign back in using your updated details. (System Preferences > iCloud, click the sign out button)
    In order to change your Apple ID or password for your iTunes account on your iOS device, you need to sign out from your iOS device first, then sign back in using your updated details. (Settings > store, scroll down and tap your ID)

Maybe you are looking for

  • Using CASE WHEN in PL/SQL package

    I am trying to convert the values in a selected column into 1 and 0 so that I can display all 1s in one column, all 0s in another. I am doing this in a PL/SQL package. However ORACLE compiler does not like the CASE construct. Does anyone know how to

  • US / CAN Workshops -- feedback?

    As announced at the Congress, the North American UA program will be offering workshops at three locations in June and July.  The date and locations below are firm.  The topics taught at each location and the class length are still flexible -- we woul

  • No digital output

    All of a sudden the Digital Output on my iMac has stopped working. There is no red light coming out of the toslink cable. In System Preferences/Sound there is no Digital Out in sound output devices anymore. I have checked that the cable is ok. Previo

  • Computing of the shortest path using a custom cost function in Oracle NDM

    Hi to all, I have Oracle 10g R2, I'm working on Oracle Network Data Model. I created a Network (named ITALIA_NET) based on links table (named ITALIA_LINK$) and nodes table (named ITALIA_NODE$). Until now I computed the shortest path between two nodes

  • Any report or Table to see orders with BP partner functions  in SAP CRM?

    Hello All, Could anyone help me  in getting  the table or any report  for orders with BP partner functions in SAP CRM? Would appreciate replying at the earliest. Cheers Sreedhar