Add new key figure and characterstic into cube without touching historical

Hi ,
I have cube in prodcution which has historical data of last 4 years .
Now buisisness is asking me to add one keyfigure and and one characterstic to cube without tcouchingand next load these 3 fileds to be populated .
is it possible to this ?
Please let me know

check the blog by Nagesg Ganisetty regarding remodelling option available in 7.0.
thats a good blog and very informative.
http://help.sap.com/saphelp_nw04s/helpdata/en/8c/131e3b9f10b904e10000000a114084/frameset.htm

Similar Messages

  • To add new key figure in existing info cube (BI 7.0)

    I m using BI 7.0
    How can I add new Key figure in my existing info cube?
    Thanks
    KS

    hi,
    check the following the links
    http://help.sap.com/saphelp_nw04s/helpdata/en/58/85e5414f070640e10000000a1550b0/frameset.htm
    thread's regarding remodeling
    Remodeling Toolbox
    Remodelling option in 7.0
    https://www.sdn.sap.com/irj/sdn/advancedsearch?cat=sdn_all&query=remodeling+&adv=true&sdn_author_name=&sortby=cm_rnd_rankvalue
    hope this help you
    happy new year 2008
    regards
    harikrishna N

  • How To Add New Key Figure in Manual Planning

    Dear All
    Please Help
    I Already implement BPS for 2 year.
    Now user want to add new key figure in Cube.
    I already add new key figure to cube and activated it.
    But in Manual Planning, The new key figure not show in selection
    what I must do?
    Please Help.
    Thanks

    Hi,
    not all key figure types are supported in BPS.
    1. All key figure types must have aggregation SUM, SUM.
    2. Supported key figure types:
    - amout
    - quantity
    - number (integer, float, dec)
    - time, only type DEC
    - datum, only type DEC
    All other key figures are filtered out and are not available in BPS.
    Regards,
    Gregor

  • Hi Gurus, To Add New key figure in BW 3.5 flow ODS- Infoset

    Hi Gurus ,
    I have rquerimennt to add a new  keyfigure in ODS and then into  Infoset .  The histrorical data for this keyfigure is not needed . Can you please let me know what the are changes needed to be done in Transfer structure -> cs->updaterules->ods->infoset.
    should i delete data from dso before I add keyfigure?
    Rehards
    sriram

    Hi
    are going to get the values for the new key figure from source or is it going to calculate in BW side?
    If yes, then add that key figure in source DS, replicate the same BW system.
    Now add this key figure to your ODS and activate.
    create transformation for this. and activate.
    as this is key figure, you will get data for this in info set automatically.
    Regrads,
    Venkatesh

  • Add new key figure to an Infocube

    Hi Experts
    I need add two new key-figure to the Infocube with data.
    Can I do this, or I need have an empty cube in order to made the changes?
    Thank you in advance!

    Yes the same, no need to delete data unless you recategorize the existing characteristics the same is true for the ods too. Adding is not issue, only removing.
    thanks.
    Wond

  • New Key figures and Macro updates

    Hi,
    Is there a way to ensure that a change in the data view design  by adding additional key figures and changing the positions of the key figures/macros DOES NOT result in changes in Macros already present. This seems a little ridiculuous when i compare this to spreahseet functions, where only fixed references in the cells  are impacted by changes in rows and columns, adding columns and deleting rows etc, else the formulas/macros in excel adjust automatically. The Macros in my planning are adjusted and deactivated after inserting some more key figures and shuffling some up and down to organize the book for some new functionalities. Is there a report/technique to reset the macros so that they work as intended with proper references as defined.
    Regards,
    AS

    Hi
    As Somnath says this is unfortunately the "normal" behaviour of the system. The macro workbench basically allocates a number to each key figure internally, so if new key figures are introduced, or even if you change the order of key figures in the data view, then this can affect the macro functionality.
    As long as the new key figure is introduced and placed at the end of the list in the data view then this will not normally affect the macro, it just needs re-activating.
    I find it frustrating when I have to re-order key figures in a data view then I have to check all macros are still working correctly and that the key figures used in the macro are the correct ones but unfortunately SAP will just say "as designed"!! 
    Regards
    Ian

  • Add new key figure with characteristics in report painter

    Hi expert,
    I am create a new report painter in GRR2 under report group 8A2 (EC-PCA: Standard Reports) and i would like to create a report show on G/L amount with segment.
    When i click on first column to assign "key figure with characteristics" i am not able to find characteristics "segment".
    Please kindly advice how to create in new characteristics in report painter?
    Thanks.
    p/s : profit center number is same with segment number
    regards,
    ng chong chuan

    Hi,
    "segment" is not a characteristic of classical profit-center accounting (libraries 8A*). Its a New GL characteristic, thus create a report painter report for New GL library.
    best regards, Christian

  • Adding a new key figure to Info Cube

    Can I add a new key figure to an existing Info cube in which data is loaded?
    Assume that In Info Cube we have the following.
    Stu Id -- Characteristic
    Maths , Physics , Chemistry -- Key figures
    These are the info objects which are already available and transfer rules are already available for the same in the infosource.
    Could any one let me know how to add one more new key figure (total ) , which is the sum of the three marks to the Info Cube and populate the data in to the same.
    I have tried the following steps ,  but could not get the solution.
    1). Create a new key figure info object (total).
    2). Add the same to the communication and pull the same into transfer rules of the existing info source and activate the same.
    3). Add the new key figure to the info cube.
    4). Open transfer rules for the info cube and change the mode from NO updation to Addition for the particular key figure (total).
       When I perform the 4th step it is giving a red symbol beside the key figure in update rules and I'm not able to activate the same.
    Any help on how to add key figures to update rules and transfer rules is highly appreciated and points would be assigned.
    Thanks

    1.add new Keyfigure to Infocube.
    2.Go to Update rules> go to update type of that Keyfigure>selct formula in update method>create new formula>here you can add up your 3 keyfigures-->OK.
    activate update rules and InfoProvider.Check all are active or not..
    by using Export generate datasouce ,you populate data(historical data)  to new keyfigure as well.Then you have to delete historical data requests.
    or iyou can create formula in query designer as well as srinivas suggested.that would be better option.

  • Add of new key figure.

    Hi..
    is it possible to add new key figure in the planning table of the ICH.
    for ex. there are key fig like demand, planned receipt, firm order in the SMI Monitor (Supplier view of ICH) i want to add new key fig in that grid...is it possible..
    Plz suggest...
    Thanks in advance..

    Hi Rupesh,
    Were you able to achieve this? I would be really thankful if you could jot down the steps you followed towards achieving this.
    Thanks,
    Puja.

  • New key figures in multiCube not available in old query

    Hello every one,
    I created new key figures in a mult Cube but not I wish to put them in the query based on this multi Cube and the figures are not there.
    I already actived the multi Cube, also sign on and sign off the BEx, generate the query using rsrt but until now no solution.
    Can you help me out?
    Thnaks

    did you add the fields using the query designer....
    also make a double check that this query is based on that multiprovider...
    rgds, Ghuru

  • Addition of new key figure in ODS

    Dear all,
    In ODS, delta is loaded everyday through process chain. Now according to business requirement, we need to add one more key figure in it. I don't have to map it with any of the R/3 field. Only i have to create update routine to assign value in it using already existing key figure.
    Can i directly add new key figure in the ODS? Will it affect my data present in ODS as well as daily delta load process?
    If i can do this, can i assign exact 'key figure' value for the existing data also?
    Please guide me for the same. We are using BW 3.5.
    Regards,
    Omkar.

    Hi,
    I am not sure that it is true that you need to delete data.  I am sure one can add a field to the ODS without deleting it.  The field will remain blank after creation, unless you fill it:
    1.  manually using a flat file for past data; mapping will work for subsequent data
    2.  Use a self reference if the value is already present in another key figure.
    The change may take a long time to activate depending on the following:
    1.  Size of the ODS
    2.  Existence of indexes.
    However,  as you are running a delta you need to be careful of the delta queue if you also intend to touch the datasource.
    Cheers....

  • To delete and insert a new key figure in the cube

    Hi Experts...
                 How can I delete a key figure and insert a new key figure into a cube with data...? Should I be creating a new cube with the new key figure ?
    Thank you..
                Manohar....

    Hi
    Are you using Bi2004s
    yes you can delete,add,replace a key figure
    have a look at this blog for step by step procedure
    /people/mallikarjuna.reddy7/blog/2007/02/06/remodeling-in-nw-bi-2004s
    hope this helps

  • Add new key figs or characteristics and "Repair full request"

    Hi Gurus, here are my questions
    1.If I add new key figs or characteristics(which are not Key fields) to ODS and Cube containing tons of data, Will the transport for structure changes fail due to presence of data?
    2.The extractor to the ODS which inturn is feeding the cube, is delta enabled. So the newly added objects wont have entries for historical records. If I change this extractor to "Repair full request" after adding the new fields, will the new fields then get populated?
    3. After the "Repair Full Request" activity, Can I change the Infopackage setting back to delta update mode?
    Thanks for the help in advance!!
    Simmi

    Hello Simmi,
    1. Transport should go fine. As you are not changing the key fields, it should not cause any problem even if data is present.
    2. Yes. But make sure what data you want to laod. As with full repair, system is not going to check for duplicate data. The responsibility lies with you.
    3. Sure. if you mark the full load as repair, the delta settings will be unaffected.
    Hope it helps.
    Regards,
    Praveen

  • Add update rule for new key figure in one info struc

    Hi, everyone
    I would like to know how to add update rule for new key figure in one info struc.
    Thanks ahead.
    Eric

    1)I have created the update rule for one info structure
    2)add one key figure in the info structure due to business requirement
    3)then I use MC25 to add update rule for the new key figure, but I find that there no relevant menu to do such operation.
    Can anybody tell me how to do with it?
    Any answer will be appriciated.

  • Diff between Calculated key figure and new formula 6extra functions why

    Hi Friends
                  In BEx query designer we have Restricted key figure & Calculated key figure. In the case of Ristricted Key figure And new selection the difference is Global and local.
    But if we come to Calculated Key figure and New Formula the difference is same global and local. But in New formula we have 6 extra function. My question is does is there any certain reason for this or SAP AG not be able to develop those functions
    Thganks & Regards
    Bramhanand

    Hi Surendra thank you for your reply.
    But i am not asking difference between calculated key figure and New formula.
    What i am asking is in the case of Restricted Key figure And new selection the difference is Global and local.
    But in Calculated Key figure and New Formula the difference is same global and local and in New formula we have 6 extra function. My question is does is there any certain reason for this.Why not SAP AG is not included the new formula functions in Calculated key figure.
    Thanks & Regards
    Bramhanand

Maybe you are looking for