Add-on manager malfuction - AMO not working , search hnags, no list extensions

Using FF 18.0.2 then 19.0 in linux mint 14 64-bit (since 26 Feb 2013)
(Reprise of much earlier mess-up.)
AMO has stopped functioning (new design is still rubbish anyway)
Search stays at "Loading" always
Extensions are not listed
(Plug-ins are listed)
Check of compatibility seemed to hang.
Updated, Restarted in safe mode, cleared all cookies, cleared cache.
SNAFU
Whoever wrote this heap of c### (sorry, code :) even has avoided having a keyword in bugzilla . Must be a top-rate manager.
I can load extensions direct from urls, but some seem to hang as loading completes.
I can't list them, except by looking in internals.
FF seems sluggish, though net speedtest seems ok
Try to install "Details" collector add-on. SNAFU, loads but doesnot complete.
Use the clipboard route. Nothing much visible in about:support (this, in safe mode, newly updated FF)
Hrrmph.
Any solutions?

Thanks for noticing, djst.
{ fyi: acronym SNAFU = Situation Normal, All Fouled Up
well, I think we would normally say "fouled" up.
An expression of dissatisfaction and of universal realities.}
{ and fyi = for your information, so it is ;-}
Yes, I was referring to a non-functional, stuck, standard AMO UI, in a particular circumstance.
I don't have many good words for it, the new AMO.
I have several bad words I shouldn't use here, though.
Duly filed as bug
https://bugzilla.mozilla.org/show_bug.cgi?id=84558 qv
⦃ qv = Latin quod vide, "see that" ;-⦄
As yet, hardly a stir of interest, but the bug is more fully described there.
To be fair, although I've hit it before, I reckon it must be rare, though something could be improved about the way over-capacity is handled.
And I thought I'd reported it before, but a search doesn't turn up a result.
The "new" AMO is something of a bee in the bonnet for me, a regular irritation.
As for there not being a relevant bugzilla keyword, that's me being fallible again, not understanding properly.
Apparently I should have looked for Product=toolkit, component=Add-ons manager, rather than for keyword which is more specific to the progress of any potential fix. Learning curve.

Similar Messages

Sharepoint Custom calendar – Hover over the date to add a new item is not working – Sharepoint 2010

Hi,
In my Sharepoint visual web part i am using default sharepoint calendar view. But Mouse hover over the date to add a new item is not working. Please see this image below i need the same add new item functionality.

Hi Sudhanthira,
Couple of simmilar queries i can see from Madhu posted.
Please follow this thread:-
http://social.technet.microsoft.com/Forums/en-US/sharepoint2010programming/thread/b62f9b7e-2ce1-4efd-905c-9cc5471ad216
To be or Not to Be..The question is this only......

Automatically Add to iTunes folder is not working in iTunes 10.1

Hello,
I have a problem since the iTunes Update 10.0->10.1.
The "Automatically Add to iTunes" folder is not working in iTunes 10.1.
Whenever I put mp3-files in that folder, iTunes only adds these files when I start iTunes. I put some new files in this folder and nothing happens. Only when I restart iTunes the mp3s are added to my library.
Greetings
Thomas

It always worked that way. iTunes only acts on that folder if iTunes is running. It does not have to be playing, but it does need to be open.
If you add files to the Automatically Add folder while iTunes is closed, they will sit there until iTunes is restarted.

In Camera raw setting of CS6, using the adjustment brush, the new, add or erase buttons do not work. Please advise.

In Camera raw setting of CS6, using the adjustment brush, the new, add or erase buttons do not work. Please advise.

What operating system are you using?
Which version of camera raw do you have in photoshop cs6?
After you select the Adjustment Brush, the New button should already be enabled.
Then after you draw on an area of the image, the Add button should be enabled, with the option to choose either of the other two buttons; New or Erase
Could you post a screenshot?
Maybe all the adjustment values are set to zero?
(at least one needs to have a value other than zero)

Verizon Access Manager Download link not working

Hi,
Verizon Access Manager Download link not working, Following Links
http://www.vzam.net/download/download.aspx?productid=872
http://pcdn2-download.vzw.com/win/7.7/VZAM_7.7.1_2727b-AC30-Web.exe
plz help to download verizon five spot access manager.
thanks
karthirocks

Hi karthirocks! I'm sorry to see you're having any difficulties using these links. I've clicked on both, but had no problems getting pages to launch or in getting the application to download. If this is still a problem for you, please describe the issue you're experiencing. Also, please share the browser version you're using, and if you've enabled any security feature that prevents access to certain secure sites or services. Thanks!
DionM_VZW
Follow us on Twitter www.twitter.com/vzwsupport

Zen Micro 5gb - Playlist on the fly with "add to selected" often does not work (AD HOC 'playlis

I've found ad-hoc playlist made from ADD TO SELECTED often does not work. Here are other issues:?. Does not add? at all OR only adds after first song selected played2. Cannot swith from ARTISTS to SONGS w/o killing list. This will kill the ongoing list.3. If I make mistake and hit the PLAY button, it wipes out the entire list I'd already made. Any of these issues resolved in Zen Vision M?

try reloading the firmware and if that doesnt work try opening the case and cleaning it if there is anything in there. the button may be stuck. and if that doesnt work i dont know what else to sugjest. it seemed to work for me.

Itunes document manager pro will not open a document with .cwk extension. It will catch the document then error message states that it cannot open document. Can anyone tell me what Im doing wrong?

Itunes document manager pro will not open a document with .cwk extension. It will catch the document then error message states that it cannot open document. Can anyone tell me what Im doing wrong?

Forgive my ignorance but I have never hear of iTunes Document Manager Pro. If you mean Document Manager Pro, i was able to find that. Back to your problem, have you tried opening one of those files in the iOS iWorks apps? Form the quick read that I did about this, .cwk files can be opened by Pages, Numbers or Keynote, depending on what type of document that it is and those files can be read by Document Manager Pro, after properly saving them. I don't see that you can go directly from the .cwk file in Document Manager Pro without converting them first.
I took a very quick look at the app, so I may be a missing something about its capability.

CsrAttachmentUploadDiv part attachment is not rendered SP 2013(Attach file in not working for all the list forms)?

csrAttachmentUploadDiv partattachment is not rendered SP 2013(Attach file in not working for all the list forms)?
Ravi
function ShowPartAttachment() {
ULSopi:
    if (document.getElementById("part1") == null || typeof document.getElementById("part1") == "undefined") {
        alert(Strings.STS.L_FormMissingPart1_Text);
        return;
    (document.getElementById("part1")).style.display = "none";
    (document.getElementById("partAttachment")).style.display = "block"; //problem here

Am also facing the similar problem....any iputs are highly appriciated.
Issue..
1) Defined the attachment type in IMG.
2) Added the attachment type "SFREEATTM" by selecting other attributes---> Attachment Types.
3) Attached the excel file in the design.
See the screen shot below:
The Issue is when testing through tcode nwbc in the inbox the attachment tab is not visible after selecting the particular form.
Please see the screen shot below:
Did i miss any Configuration?? Please suggest...
Regards,
Naveen

Skrolu mouse does not work properly in the list of bookmarks

skrolu mouse does not work properly in the list of bookmarks
yer imleri listesinde maus skrolu düzgün çalışmıyor

A possible cause is a problem with the file places.sqlite that stores the bookmarks and the history.
*http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
You can also try to move (delete) the Firefox plist file.<br />
See [http://www.macfixit.com/article.php?story=20060606082246983 How .plist files become corrupt and troubleshooting the results]
Go to "Library > Preferences" and remove the plist file for Firefox (org.mozilla.firefox.plist).

Power Manager 4.42 Not Working T61p Vista 64-bit

ThinkVantage Power Manager is not working on my machine. I first noticed this after System Update added several new ThinkVantage programs, including PM version 4.41a several weeks ago, but I can't point with any certainty a specific cause or beginning to the problem.
PM now stops working every time during initial (power-on) machine boot-up showing message: "Power Manager Stopped Working". This seems to happen whenver it is installed by system update. When I have tried installing PM manually, it simply refuses to install, giving a short message saying it cannot run on my system. Earlier versions ran OK before. Microsoft Problem Reports and Solutions is of course clueless about this (and most other crashes).
I have tried uninstalling, rebooting, and reinstalling both PM and the latest PM driver in several different sequences, but nothing seems to work. I was hopeful that a recent upgrade to PM version 4.42 (via System Update) might solve the problem, but same thing happens and manually installation still doesn't work. I also uninstalling Access Connections (which has given me other problems), rebooted, and tried loading both PM and PM Driver, but with the same results. Something funny going on...
I have ThinkPad 61p (6459-CTO) with 4GB RAM, running Vista Ultimate 64-bit with NIS 2009. I have installed the most recent BIOS and have other up-to-date Lenovo software via System Update.
Any suggestions?
Thanks

I have tried several more things, including upgrading to Visual C++ 2008 in an attempt to get my system to install TV Power Manager 4.42 (or earlier versions). I still get the same message when I attempt to install manually: "cannot run on this system". Same thing happens when trying to load an older version 4.20a that I found through the forum.
I have been successful in loading the version that came pre-installed on my computer (found in SWTools folder), and that seems to work, though with very basic functionality. It appears to be Version 2.11.
I would really like to find a way to install a newer version (preferably 4.42), as it seems this is needed to run later versions of other TV software. I have T61p (6459-CTO) running Vista Ultimate 64-bit, and the BIOS and drivers are all up to date, as per Lenovo site.
Thanks for any advice.

Photo gallery module manage items description not working

Hi. On this page I've got two photo galleries. For some reason the Description in the Manage Items tool only works some of the time. Seems to be quite random as to when it will/won't work. Is there a reason for this?
Waitakeres Ranges Maps

I'm having the same problem. Can you give me an idea of how this is possible using AJAX or point me at a tutorial?
for every iweb photos page iweb generates an rss.xml file with it, the captions are kept in the rss.xml .
so you can use ajax method to read the rss.xml and figure out what need to be manipulated.
there is no tutorial of any kind for iweb ajax widgets, I have not seen any one yet to crack an iweb widgets (this forum or elsewhere); so you are on your own.
that said you can hyperlink photos page captions and thumbnails with simple javascript (simple mapping lookup), but you still need to know javascript and iweb widgets.
here is my simple javascript sample: http://temp.cyclosaurus.com/NoThumbnails/Photos.html
thumbnails and captions are hyperlinked to apple, ggogle and yahoo.
code is linked to the sample, you'll have to adapt it to your own needs.

It seems I am installing add-ons ie, ebay sidebar, tweetbeat firsthand, they look installed in the add-on box but are not working at all?

I can go to tools, add ons and choose the add on I want and install it, then restart firefox but although the new add ons show up in the add on list nothing is there, they are not working at all, I am able to click on and change the options but apart from the new add ons do not appear to be there?

Hi,
I actually have the same exact problem with southwest.com. I think they use AJAX to load the airport cities when you're choosing a flight, perhaps. Normally, when you click the box (or start to type a city) in the "From" box, it pops up a list of airports in a floating box (not a separate browser window). Since upgrading to Firefox 3.6.15, this just doesn't work, and it also keeps me from using southwest.com in general. The calendar links for the departure and return dates are similarly busted.
I tried restarting in Safe Mode, and it is still broken in Safe Mode.
I downloaded the FF4 RC, and that version had no problem. If I switch back to 3.6.15 though, it is still broken. I tried it in Chrome and IE7, and southwest.com works fine. It appears to only be broken in FF 3.6.15.
Thanks!

JSF, encoding, do not working search with non english words!

All my pages UTF-8, Database charset set UTF-8, My search with russian words does not working, How can I improve it?

Update: It seems to be related to the themeLinks in the JSP. I got it working for a second by adding in a missing themelinks link... but it's not working anymore. Huh.
Ideas?

Icloud manage storage link not working on my iphone 4s

I need to manage my icloud storage, but the manage storage link on my iphone is not working. When I click on it, nothing happens. Can anyone help with this problem? I don't want to buy more storage if I can turn off some of my apps in icloud. Has anyone else had this problem? Thanks!

Had the same problem recently (on an iPhone 4S, iOS 5.1.1). The phone couldn't back up to iCloud as the storage limit had been exceeded, and tapping "Manage Storage" in the iCloud settings didn't work: it just briefly showed a spinning wheel but I couldn't enter the Manage Storage screen. Looks like a bug.
In the end I was able to solve it via the iCloud settings on a laptop. Using this route, I removed the backup that was clogging the available 5GB free storage and was able to access Manage Storage again to tweak the settings. In my case this meant disabling iCloud backups of photos in the camera roll, which was the reason for the large size of the backup file in the first place.
Here's what I did:
1. Important step: first of all, make a backup of your phone in iTunes by connecting it to the computer and chosing the backup option in iTunes. You will delete the iCloud backup in step 3, so it's best to have another backup handy. It's not very likely your phone will crash in the short time it takes to complete these steps, but better safe than sorry.
2. After making the full phone backup, I downloaded all the photos from the camera roll onto my computer and deleted them from the phone. There are different ways of doing this, on a Mac you can for instance use Image Capture. This step is not really necessary to get the backups working again as you will probably disable camera roll backups in step 3 anyway, but it's good to get into the habit of backing up photos on the computer regularly, rather than in iCloud. If you want to keep some photos on the phone as well, you can always copy them back from the computer onto the phone.
3. Access iCloud storage management via the computer rather than the iPhone. Instructions: http://support.apple.com/kb/ht4847 > Backup > Deleting backups and turning off Backup for your device > Mac OS X (or Windows 8, Windows 7 and Vista). If you use a Windows computer and the iCloud control panel hasn't been installed yet, you can find it here http://www.apple.com/icloud/setup/pc.html.
I don't think you can delete specific elements like the camera roll from the backup this way, you have to delete the whole thing. But you made another backup in step 1 so this isn't really a problem.
4. On the iPhone, try to access Settings > iCloud > Storage & Backup > Manage Storage again - it should work now. In the next screen, choose your iPhone and you will get the Backup Options where you can switch backups on and off for different apps. It shows you how much storage each app takes, you will probably see that the Camera Roll is the largest so you may want to switch that off. Once you're happy with the settings, go back two screens to Storage & Backup and switch Icloud Backup back on (it was automatically switched off in step 3), and if you are on Wi-Fi, tap Back Up Now so it makes a new iCloud backup right away.
That's all, hope it solves your problem.

Weblogic 10.3.6 managed servers are not working properly

Hi,
i am using weblogic 10.3.6. I have 6 managed server and one Admin server. I observed one thing that when i up Managed6 and run my application. In one of the java file i am using one jar file to fetch one class(Bussiness Object instance). For managed 6 the code is working fine. it gives me the same class file. but if i up any other managed server then i am getting the Impl of that class.
can anyone help me out. Thanks in advance.

Hi,
You shouldn't have to edit the startup.properties manually.
Try the following sequence:
1. Shut down all managed servers;
2. Change the property in the Admin Console;
3. Restart the AdminServer;
4. Start the managed servers and check the property;
Make sure the managed server do not start in Independence Mode

Add-on manager malfuction - AMO not working , search hnags, no list extensions

Similar Messages

Maybe you are looking for