Add StationGlobal, FileGlobal and Locals from a C# code module

Is it possible to create StationGlobal, FileGlobal and Locals from a C# code module?
I know it is possible to get and set variables using PropertyObject, but as far as I know it is not possible to create them.
Best regards

The easiest way is to use the PropOption_InsertIfMissing option with the SetVal* methods.
Be careful if you have multiple threads accessing the variables at the same time though because if you are creating and deleting variables dynamically while accessing/creating/deleting them from other threads it can lead to race conditions (i.e. crashes and memory corruption). If you need to access the variables from multiple threads at once, I'd recommend creating all the variables upfront, if possible, in the first thread, before any other threads try to access them, otherwise you will need to use a Lock step or step setting to protect access to the variables and any parents variables of variables you are inserting or deleting.
Hope this helps,
-Doug

Similar Messages

Can I add or edit Keywords and captions from within the Map module?

I frequently find a need to edit or add to the caption while reviewing and geotagging photos in the Map module. Constantly toggling between modules is inconvenient. Is there a way to add/edit captions or keywords while working in the Map module (or view the map module while working in the Library?
Thanks!
Steve

thank you
From: Modesto Vega <[email protected]>
To: Steve Murray <[email protected]>
Sent: Thursday, January 29, 2015 3:27 PM
Subject: Can I add or edit Keywords and captions from within the Map module?
Can I add or edit Keywords and captions from within the Map module?
created by Modesto Vega in Photoshop Lightroom - View the full discussionYou should be able to change the title, the caption, the sublocation, the city, the state/province, the country, the ISO country code, the altitude, the direction, and a few other fields. However, you cannot add keywords. It would be real nice if Adobe could add this to the Map module. If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7145077#7145077 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7145077#7145077 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following" Start a new discussion in Photoshop Lightroom by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

Extracting operators and operands from the source code

Hi there,
I am looking for a way to extract operators and operands from a source code to do a complexity analysis of the code. The final outcome I am expecting is to get the number of operators and operands in the code, to perform a Halstead Complexity Analysis.
Please let me know how this parsing can be done apart from just doing a sequential search of the content in the file.
Any samples and references are highly appreciated.
Thanks in advance!
Regards,
Aravinda777

Common way to analyze code is to defining the things you are interested in using some approproate language and then using a parser generator (or compiler compiler = cc). I used antlr some time ago for this reason. Perhaps you want to take a look at it:
http://www.antlr.org/

Is it possible to launch the SequenceAnalyzer from a C# code module in a Custom TestStand Editor

The Sequence Analyzer is not available in the Custom TestStand Editor Mode GUI.
Is it possible to add the Sequence Analyzer to a menu in the custom TestStand Editor?
Is it possible to launch the sequence analyzer from a C# code module, this method is then called from a sequence call back.
Best regards
Patrick

From the TS Help:
TestStand Sequence Analyzer Application
Select Start»All Programs»National Instruments»TestStand»Tools»TestStand Analyzer or run <TestStand>\Bin\AnalyzerApp.exe to launch the stand-alone TestStand Sequence Analyzer application. Use this application to analyze projects outside of the TestStand Sequence Editor.
The sequence analyzer application window contains the following tabs:
Files—The files and directories to analyze.
Rules—The rules to use for analysis. Use this tab to enable, disable, and configure rules for analysis in the current project.
Options—Contains the project options that control the analysis and determine whether the sequence editor automatically saves the current analyzer project.
Messages—Contains the list of messages for the most recent analysis of the current project, sequence file, or workspace file. The sequence analyzer overwrites the content of the Messages tab each time you start an analysis session.
Analysis Summary—Contains a summary of the most recent analysis of the project.
Command-Line Usage
You can use the following command-line syntax to open an analyzer project:
AnalyzerApp.exe "C:\My Documents\MyProject.tsaproj"
CTA, CLA, MTFBWY

Calling a Configuration Entry Point from a C# code module

Hi,
Is it possible to call a configuration entry point from a C# code module?
I have a custom process model which creates some configuration entry points.
One of the entry points, calls a C# method in a code module to display a Startup screen for the operator.
In an Editor User Interface, I have added a toolbar, now I want to execute the previous entry point initiated from my C# code to get the Startup screen again when a button is clicked on the toolbar.
Best regards

Hi James,
Thanks for your suggestion, but unfortunely the code hangs after executing the entrypoint, if have tried it in two ways, but both have the same result. Do you have any idea how to fix this.
Trial 1:
  Engine engine = new Engine(); ApplicationMgr applicationMgr = (ApplicationMgr)engine.GetInternalOption(InternalOptions.InternalOption_ApplicationManager);EntryPoints entryPoints = applicationMgr.ConfigurationEntryPoints; int intIndex = 0;foreach (EntryPoint entryPoint in entryPoints) {    switch (entryPoint.Name.ToUpper())    {        case "TOGGLE ONLINE <-> OFFLINE":            object objEditArgs = System.Type.Missing;           entryPoint.Run(objEditArgs); // Application hangs after executing this command, the entrypoint does not execute!             break;        default:            break;     }
     intIndex++;
Trial 2:
  Engine engine = new Engine(); ApplicationMgr applicationMgr = (ApplicationMgr)engine.GetInternalOption(InternalOptions.InternalOption_ApplicationManager);EntryPoints entryPoints = applicationMgr.ConfigurationEntryPoints; int intIndex = 0;foreach (EntryPoint entryPoint in entryPoints) {    switch (entryPoint.Name.ToUpper())    {
        case "TOGGLE ONLINE <-> OFFLINE":           // Application hangs after executing next command, the entrypoint does not execute!           applicationMgr.GetCommand(CommandKinds.CommandKind_ConfigurationEntryPoints_Set, intIndex).Execute(true);              break;        default:            break;     }
     intIndex++;
Best regards

Can you add new camera and lenses to lens correction profile module

I refer to Lightroom version 3.6. I have purchased a panasonic-gx1 plus 14-42mm & 45-175mm lenses and would like to add the lens profiles to the lens correction module. Appreciate if someone could let me know if this possible?

The GX1 is supported on 3.6.
If the lens profiles you need are not available in 3.6 use can use the downloader to check for availability or create by yourself.
Read here: http://labs.adobe.com/technologies/lensprofile_creator/

I am getting sync problems with Exchange Server and local outlook. Error code is 18439. Does anybody have an idea what the problem might be?

I am using Outlook on my Imac, which is linked to the Windows Exchange Server. All off a sudden I keep receiving messages saying that the message Re: xxxx cannot be synchronized with the exchange server. When I delete the message from my local mail box, all is fine, but after a while another one pops up. The error code is 18493. Does anyone have an idea what could be going wrong???
Thanks for your help already now!

Hello Wolfgang,
I get the same error, but I cannot figure it out too. I hope you or I get some responses back! I do not know why there isnt an edit feature in outlook to acknowledge the individual alarm so it does not alarm again!
Fil

Add/Update Employee and put the ApplicationUserID (User Code) empty

Hello,
I'm trying to create or update an Employee master data but some times I need to put the user code as empty, when I'm trying to set it as 0 it's give me an error
Enter valid code [OHEM.userId]
When I put it as -1 it's updated successfully but when I'm trying to set another employee on -1 I get this error
The user is already associated with another employee [OHEM.userId]
Please advice it's really urgent

Yes that's right when adding there is no problem, but if I need to make update then what I should do if I want to set the user id empty?
if i have only one employee there is no problem the update success but if I have more than one employee I get this error:
The user is already associated with another employee [OHEM.userId]

How do I add certain songs and playlists to my iPhone but not others?

Hi all,
I recently installed iTunes 11.0 onto my MacBook Pro, and I yearn for the days of far simpler content management. All I want to do is add certain songs and playlists from my computer onto my iPhone without re-syncing the entire thing (every time I do, sound files that I created for work find their way onto my phone, and I have to re-delete them every time). But I can't figure out how to simply add ONE song or ONE playlist to what is already there. In the previous version, it was so simple--just point, click, and drag. Now I can't figure it out and I feel like an idiot. Can anyone show me how to do such an absurdly simple thing?
Thanks,
Neil

When you sync your phone with your laptop (or other device that has the songs you want), go into your music preferences and choose "Selected playlists, artists, albums and genres." This should allow you to select the three songs you want from your library. Make sure to click or tap on "apply" or else the changes will not be saved. Let the phone completely sync and those three songs should be in your phone's music library.
Hope this helps!

SIU - Apply Computer Name and Local Hostname settings from a file

I am setting up a workflow to image corporate computers and wanting to know how the "Apply Computer Name and Local Hostname settings from a file" works in the Apply System Configuration Settings task.
We bind the computer to AD and OD and we have a specific naming convention for certain departments and trying to automate the entire imaging process.
Would this be something that can be done with SIU?

Well, maybe there's a bug in the latest version (10.5.3) of SIU as this is not what is happening.
It doesn't seem to matter what I specify for the name parameters I end up with a Bonjour name of ".local".
I put in a line of the form <Mac Address><TAB>tom<TAB>dick<TAB>harry into the text file used by the Apply System Configuration Settings Action.
and end up with hostname = tom, Computer Name = dick and Bonjour Name = .local
I'm building the NetInstall image on a new iMac running 10.5.3 booted out of a second partition and create the image from the main boot partition (also 10.5.3). I then copy the image to my server (10.5.3) and make a second iMac boot up from the NetInstall image.
For what it is worth the Workflow Actions I am using are:
Define Image Source
+ NetInstall
Source: Macintosh HD
Filter Clients by MAC Address
+ Allow
<List of MAC Addresses>
Enable Automated Installation
+ On Volume Named: Macintosh HD
+ Erase before installing
+ Primary Language: English
Apply System Configuration Settings
+ Apply Computer Name and Local Hostname settings from a file: <FILE>
Add Packages and Post-Install Scripts
+ Shell Script [Doesn't work - we're discussing in it in another thread]
Create Image
In: Public
Named: NetInstall Classroom
Volume Name: Classroom iMacs
Index: 1

Solaris Unicode and locales how can I add another language.

I am seeking a way to add supports for my local language Bengali in Solaris 10. After migrating from Fedora Core I have been stuck with Solaris. I just cannot find the way out to install other Unicode languages. If it was Fedora Core I would have just installed rpm of my language.
The problem is most of my file and directory names are in my local language (using Unicode). Now I am stuck because I cannot read them because Solaris isn't displaying those characters.
There must be a solution. Please inform me.. Also I cannot find Bengali Locale in my Solaris 10 (update 5).

You use # localeadm command to install locales. FAQ on locales for Solaris 10 is in [this site|http://developers.sun.com/dev/gadc/faq/locale.html] .
[This site|http://developers.sun.com/global/products_platforms/solaris/reference/faqs/solaris-10-locale-packages.html] contains the list of locale packages

I have an iPod Classic and the latest version of iTunes. I make all my purchases on my computer, but when I try to click the "add to" option and transfer the songs to my iPod, it doesn't work. How can I get my songs from my computer to my iPod?

I have an iPod Classic and the latest version of iTunes. I make all my purchases on my computer, but when I try to click the "add to" option and transfer the songs to my iPod, it doesn't work. How can I get my songs from my computer to my iPod?

See this excellent user tip from another forum member turingtest2 outlining the different methods and software available to help you copy content from your iPod back to your PC and into iTunes.
Recovering your iTunes library from your iPod or iOS device
B-rock

I have an iphone 4s. I have a mac computer and a pc. Most of my itunes library is on my pc, but when I try to add music to my phone from my library on the pc, it won't let me do it. I CAN add music from my library that is on my mac, same account.

I have an iphone 4s. I have a mac computer and a pc. Most of my itunes library is on my pc, but when I try to add music to my phone from my library on the pc, it won't let me do it. I CAN add music from my library that is on my mac, same account. My husband has the same problem with his iphone 4, but only uses pc.

My husband and I are using the same iTunes account on all mac & pc computers, but the libraries are different on each machine. We always manually manage our music (no auto sync). iTunes is up to date on the PCs. My husband uses our joint iTunes account on his pc, but once again, has a different collection in his library from those on the other machines. He can't load any music from his PC to his iphone 4. I can load music from my mac library to my iphone 4s, but cannot load from my pc library to my iphone 4s. How can I switch my main library that it syncs with from the mac to the pc?
Thanks

I have two apple id's one from my old laptop and one from my iPhone. I saved my iTunes library to my external hard drive and then tried to transfer it to my iMac. My music skips like a scratched cd now and I can't add any to my iPhone. Help please!

I have two apple id's one from my old laptop and one from my iPhone. I saved my iTunes library to my external hard drive right before my old mac laptop died and then tried to transfer it to my new iMac. Now when I try to play my old music it skips like a scratched cd. Also, now I can't add any music to my iPhone unless it was purchased recently through itunes and downloaded through icloud. I tried to "Organize" my library in hopes of correcting the problem but my iMac just ejects my external harddrive part way through. Please help!

Ejects the harddrive?
Of what did your old Mac die?
It sounds to me like you have some file corruption somewhere. Either in the transfer of your library to the external or the external itself is flaky if it keeps ejecting.

How to use "Add from POM" to add source path and docpath?

Hi
My team is developing multiple projects with JDeveloper 11gr2.
We share libraries and sources between team members using maven extension for JDeveloper.
We deploy class jar, source jar and javadoc jar to repository.
The project pom has some dependency defined as below
<dependency>
            <groupId>com.example</groupId>
            <artifactId>CommonClient</artifactId>
            <version>0.0.1-SNAPSHOT</version>
            <type>jar</type>
            <scope>compile</scope>
</dependency>
We use ProjectProperties->Mave->Dependencies->Add from POM button to add dependecies to Project.
The problem is that the class jar is added to the classpath but the source jar and javadoc jar are not.
As a result, Team members cannot see the javadoc in code editor.
Configure IDE libraries is an option but does not work well with maven.
Does anyone know how to add source jar and javadoc jar to project using "Add from POM" button?
Thank you!

Hi ,
Sample code snippet for GET_RELATED_CONTENT is as follows :
dataBinder.putLocal("IdcService", "GET_RELATED_CONTENT");
dataBinder.putLocal("dSource","CS");
dataBinder.putLocal("dID","3202");
dataBinder.putLocal("dLinkTypeID","1");
serializer.serializeBinder (System.out, dataBinder);
// Send the request to Content Server
ServiceResponse response = idcClient.sendRequest(userContext,dataBinder);
// Get the data binder for the response from Content Server
DataBinder responseData = response.getResponseAsBinder();
// Write the response data binder to stdout
serializer.serializeBinder (System.out, responseData);
// Retrieve the SearchResults ResultSet from the response
DataResultSet resultSet = responseData.getResultSet("RelatedContent");
// Iterate over the ResultSet, retrieve properties from the content items
for (DataObject dataObject : resultSet.getRows ()) {
System.out.println ("Related ContentID is : " + dataObject.get ("dDocName") );
Point to note is :
dLinkTypeID is set to 1 . Reason being that the rendition related content is used to link items . So looking for those related items which are as Renditions .
This value would be as follows :
dLinkTypeID Related content type
1 Rendition
2 Supersedes
3 Has Supporting content
4 Cross References
2 more sub types are :
Supports - dLinkTypeID=3 and extraparameter is isGetParents=1
Cross Referenced By - dLinkTypeID=4 and extraparameter is isGetParents=1
Hope this helps .
Thanks,
Srinath

Add StationGlobal, FileGlobal and Locals from a C# code module

Similar Messages

Maybe you are looking for