Add time series and CIF behaviour

All,
I need to delete time series and add time series again. What is the impact in a production environment? Do I need to stop CIF etc?
Cheers

There is no need to stop the CIF queues when you are deleting and recreating the time series. The data can flow in from R/3 and it will not have any impact on the time series deletion / recreation process.  But in general it is advisable to perform this task  after normal business hours when no business users are logged in and when no other jobs are running.
This is necessary because if anything were to go wrong you can be sure the problem is because of the time series deletion and recreation.
Also MAKE SURE YOU BACKUP ALL TIME SERIES DATA  to backup cube before deleting the time series , otherwise you will lose all your data as soon as you delete the time series .  In general time series is deleted only when it is absolutely necessary since it is considered a very critical process .
Thanks
Saradha

Similar Messages

  • Time series and Order series questions

    Hi Guys - Need some help in understanding/Visualizing some basic APO concepts. I do not want to move further without understanding these concepts completely. I did read sap help and couple of apo books but none gave me a complete understanding of this very basic concept.
    1. Data is stored in livecache in 3 different ways. time series, order series and atp time series. for now I am concentrating on just time series and order series. Can some one help me understand with an example how data is stored in time series and how it is stored in order series? I read that data which is not order related is called time series data and which is order related is called order series data.
    My query is even in DP time series data, data is stored with respect to product and location that is transferred to snp. In SNP too data is processed with respect to product and location. so what is the difference in time series data and order series data?
    2. what are time series key figures and what are order series key figures? I read safety stock for example is a time series keyfigure. why is it not a order series key figure? what makes a keyfigure time series or order series? can some one xplain this in detail with an example or numbers?
    3. there is a stock category group in snp tab of location master LOC3. Stock category should be product related right? how is this related to location and what does this field mean in location master
    Thanks a lot for your help in advance. Please let me know if I am not clear in any of the questions.

    Hi,
    Time series:  Data is stored in buckets with no reference to orders.( If you place the mouse on time series data and right click for
                         display details , you will not find any information.
                          Suitable for tactical planing and aggregated planning. Usually in demand planning.
    Pre requisite: 1. You need to create time series objects for the planning area.
                           2. When creating planning area you should not make any entries for the Key figure in the field Info Cube, category
                               and  category group.
                           3. When creating planning area any entry you made in the field Key figure semantics with prefixed with TS.
                               (Optional entry)
    Order series: Data is stored in buckets with reference to orders.( If you place the cursor on the order series data and right click
                          the mouse for display details , you will find information of order details.)
                         Useful for operative planning.
                         *You will have real time integration with R3.
    Pre requisite: 1. You need to create time series objects for the planning area.( though you are creating Order series)
                          2.When creating a planning area specify a category or category group or enter a key figure semantics with prefix
                            LC.
                         3. When creating planning area you should not make an entry for the key figure in the field Info cube.
    Thanks,
    nandha

  • Max Number of Time Series and Other Columns?

    What are the ceilings on the number of Time Series and Other Columns that BOP can handle?
    I can not find this very basic info anywhere but I have a client that I think has hit it.

    @ cfr:
    I googled. But I opened this thread the July 25th and I'd forgot about that link and the fact that my problem could be Firefox fault. Silly me. -_-
    I'm trying to surf w/ Chromium right now (I don't like very much Opera and other browsers based on Webkit don't read much stuff on the web) to check if issue returns. If so I'll try to check log.
    Edit:
    I found that I don't even like Chromium as well. So I think I'll use W3m and Elinks for "normal browsing" and FireFox just when I need to write a mail with my damned Hotmail account.
    Edit (2012-10-08):
    the issue still presist, even without Firefox.
    Last edited by rix (2012-10-08 20:16:25)

  • Appending and add time stamp at a time........

    Hi all,
    i am working on a scenario...
    it is file based..no mapping and bpm can be used.
    I need to pick up file through xi and append it and put in the target with time stamp to it.
    we can achieve this if mapping or bpm is allowed.....
    But,in file processing we can use only one option at a time.....
    I found a way:
    scenario one: files will be appened and kept in a temparory folder
    using another scenario we will pick up the appeneded file and add time stamp and keep in target structure...
    but i dont think this is advisable...
    please suggest me any other ways to achieve this...(can run operating system command be helpfull??)
    thanks in advance..
    Regards,
    Kiran.

    HI,
    Yes you are right, Appending and adding Time Stamp will not be possible simultaneously.
    Refer - this could help you
    Dynamic Filename with TimeStamp  
    Dynamic Filename with TimeStamp
    /people/william.li/blog/2006/04/18/dynamic-configuration-of-some-communication-channel-parameters-using-message-mapping
    But some how you have to use mapping for it. Then if its allowed to use the mapping then as you have suggested, should have to go for two scenarios. No alternative,
    Probably also you can try with Customized Adapter Module for this.
    Thanks
    swarup

  • Fragementation with Time series calculation

    Hi,
    I have three 3 tables
    Table1 for Region 1 , Frag Logic =Region = Region 1
    Table 2 for Region 2 Frag Logic =Region = Region 2
    Table 3 for Region 3 Frag Logic =Region = Region 3
    we use fragementation to query based on the region.Now i have duplicated Table 1 to calculate the Previous date for time series
    Table1 for Region 1 , Frag Logic =Region = Region 1
    Table1 for Region 1 Prev ?
    Table 2 for Region 2 Frag Logic =Region = Region 2
    Table 2 for Region 2 Prev ?
    Table 3 for Region 3 Frag Logic =Region = Region 3
    Table 3 for Region 3 Prev ?
    After adding prev tables i am almost lost,Do i need to add the Fragmentation for Prev tables also ,else we dont need as main and Prev tables are created as Alias from the base tables.Please share your thoughts.

    To use TimeSeries on Fragmentation in OBIEE, is identified as a bug
    http://obieetalk.com/time-series-and-fragmentation

  • Issue with nested aggregated in time series

    Hi Experts,
    I have a small requiremnt using time series.
    eg : (sum(current year4:Quarters bookingamt)-sum(previous year4:Quarters bookingamt))/sum(previous year4:Quarters bookingamt)
    Bookingamt is My measure Name.
    how do we implement above logic can please help regarding this.
    Thanks,
    C Mahesh

    Hi Mahesh,
    These functions help to obtain the data analyzed based on the time. There are two types of Time Series in OBIEE viz..
    1) Ago
    2) To Date
    Following are the prerequisites and procedure to create time series function in OBIEE RPD.
    a) Create a dimensional Hierarchy (ex: YearàQTRàMonth) and convert it to the time dimension. DC on hierarchy and check the box time dimension.
    b) Define the Chronological Key. A chronological key should always be the lowest level in the table and the data in it should be in the format of 20090102 or 200109 (year, month format). DC on level (preferred/last—detail) go to KEYS tab and check chronological key.
    c) Duplicate the existing column, rename and specify the formula for the column.
    1) Ago: This function when specified in any column displays data that is month ago, 2 months ago depending on the specified formula. DC on new column check use logical columns and click on exp. Builder. In the left column select functions and then time series and then AGO. Then in metric go to logical tables and select metric and in level go to time dimension and select month (1 month ago) and give the period as 1(since it is 1 month ago) then transfer two new columns to presentation layer
    Ex: sales: 100,200,300 à -, 100, 200 (1 month AGO).
    2) To Date: This functions allows us to display the aggregated measures based on the formula specified. DC on new column check use logical columns and click on exp. Builder. In the left column select functions and then time series then select TO DATE. Select metric from logical tables (revenue) and as level go to time dimension and select year(YTD) and OK.
    YTD- year to date – Displays aggregated values that is with respect to month since it is YTD. Similarly for QTD and MTD.
    Ex: sales: 100,200,300 à YTD Sales: 100,300,600
    http://www.rittmanmead.com/2007/04/obi-ee-time-dimensions-and-time-series-calculations/ -- How to implement step by step with screen shots.
    http://www.oraclebidwh.com/2009/12/time-series-wizard-in-obiee/ -- you can understand easily how to implement this with screen shot.
    Hope it help's
    Thanks,
    satya

  • Can Numbers handle time series?

    I have a time series and i want to display the data in a diagram. The intervals of the points in time vary. I found no option to display the values in a digram so that values that are close in time are displayed close to each other and greater gaps are displayed further apart. Unfortunately all values are displayed in a constant interval.
    Is there a solution, other than creating a table with all possible dates and inserting values only in rows where data is available?
    Martin

    In the old Numbers you can use an x-y scatter plot with dates for the x axis. Numbers 3.0 seems to accept the dates but displays them wrong on the scatter chart, as large numbers rather than dates.
    Please do give Apple feedback on this, in your menu Numbers>Provide Numbers Feedback.
    SG

  • Raw time series with power spectrum

    I want to generate another VI with raw time series and power spectrum. Use soundgen.vi, with a sampling frequency of 1 kHz and datasize of 2000, so that it covers 2 sec.
    How do I display the raw time series data and a power spectrum of it? 
    Find the rest of the peaks and identify them. Why the peaks are where they are?
    Attachments:
    soundgen.vi ‏15 KB

    To start do a search in the examples that came with LV for FFT. This will show you a good cross-section of what LV has to offer in terms of analysis capabilities. The thing to remember is that you can perform this analysis on data directly from a device or post-process data that you read from a datafile. After going through the examples if you have specific questions, we'll be able to give more specific answers...
    Mike...
    Certified Professional Instructor
    Certified LabVIEW Architect
    LabVIEW Champion
    "... after all, He's not a tame lion..."
    Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

  • How do I add moving averages to my time series graph is there a function on numbers on tr iMac?

    I've created a time series graph on numbers on my iMac but I need to add moving averages. Is there a function an if so where is it and if not is there a way to get around it

    Badunit,
    Here is an example plot, data sorted from most recent data at top of the table...
    You can see the moving average (of 20) is plotted from right to left.
    The Moving Average calculation is now wrong, and should have been calculated and presented from oldest to most recent.
    Here is the same data, with table sorted from oldest data at the top of the table.
    The moving average is also plotted from right to left, and shows the correct Moving Average for the most recent data.
    That is, it is calculated from oldest to most recent, with the last Moving Average data point plotted on "todays" date.
    What I want to see is my table displayed from most recent at the top (the top table), and moving average calculated and displayed as per the bottom graph.
    Edit: So, think about this some more,
    I need an option to tell Numbers to do the Moving Average calculation from the bottom of the table up, not from the top of the table down.

  • Add varchar column in to Time Series Algorithm

    i created a time series algoritham using numeric columns, but i need to add text columns so what we do?
    plz share to me if possible to add.

    Hi,
    Thanks a lot, it's really help...don't know why I didn't see this customized point before in SPRO.
    But I have an other issue, my new fields is added in the CATS screen and now I'm trying to put default value by using the user exit of extension CATS0009.
    When I complete the value of my new fields in structure CATSD_IMP, there are not taking into account and the CATS screen doesn't display the value.
    Am I using the wrong table ? wrong user-exit ? or my code ..
    Thansk a lot again for your help.
    Fanny GROUX

  • What is diff b/w order series and time seriesu2026

    what is diff b/w order series and time seriesu2026

    Hi S R,
    Order series is the concept used in SNP whereas time series is concept used in DP.
    ie In SNP, orders are stored in livecache as Order series whereas in DP, the historical data is stored with respect to time, ie time series in DP.
    Regards
    Senthil mareeswaran.

  • I am a long time iTunes user but a new MacBook owner! :) I keep the majority of my music files on an external hard drive.   I'm trying to view all those files on my MacBook through iTunes.   With windows you would go to : File/Add To Library, and iTunes w

    I am a long time iTunes user but a new MacBook owner! I keep the majority of my music files on an external hard drive.   I'm trying to view all those files on my MacBook through iTunes.   With windows you would go to : File/Add To Library, and iTunes would add all your selected files to your music library BUT WOULD NOT COPY THEM TO YOUR HARD DRIVE.  In other words, if the external hard drive was connected, you could listen, drag/drop, and edit the files.   When I tried the same thing with my new MacBook... it actually started coping the files to my MacBook harddrive.  I don't want that, it's millions and millions of mp3's that I don't want to keep on my computer, only my external hard drive.   Can anyone help?    I'm sure it's something easy, I'm just so new to the Mac world.   Being an iPhone owner for many many years I'm picking up things fast, but this is getting the best of me!  Help !

    In iTunes 11 uncheck the preferences setting in in the iTunes Preferences panel "Advanced > Copy Files to iTunes Media folder when adding to Library"

  • How to add new row and update existing rows at a time form the upload file

    hi
    How to add new row and update existing rows at a time form the upload file
    example:ztable(existing table)
    bcent                      smh            nsmh         valid date
    0001112465      7.4                       26.06.2007
    0001112466      7.5                       26.06.2007
    000111801                      7.6                       26.06.2007
    1982                      7.8                       26.06.2007
    Flat file structure
    bcent                       nsmh         valid date
    0001112465     7.8     26.06.2007  ( update into above table in nsmh)
    0001112466     7.9     26.06.2007  ( update into above table in nsmh) 
    000111801                     7.6      26.06.2007 ( update into above table in nsmh
    1985                      11              26.06.2007   new row it should insert in table
    thanks,
    Sivagopal R

    Hi,
    First upload the file into an internal table. If you are using a file that is on application server. Use open dataset and close dataset.
    Then :
    Loop at it.
    *insert or modify as per your requirement.
    Endloop.
    Regards,
    Srilatha.

  • HT201250 How do you add an external Hard drive to time machine and share on network?

    How do you add an external Hard drive to time capsule and share it on local network?
    Lee

    Ensure it's formatted as Mac OS Extended, FAT16, or FAT32, connect it to a self-powered hub, and plug it into the Time Capsule's USB port. If the drive is Ethernet and not USB, ignore everything else and just plug it in.
    (71787)

  • TS1424 trying to add Itunes match, and am almost at the end of installation when an error message pops up. it says  error 4010 cannot connect to ittunes store at this time try again later. what is the problem?

    trying to add Itunes match, and am almost at the end of installation when an error message pops up. it says  error 4010 cannot connect to ittunes store at this time try again later. what is the problem?

    Contact Apple support for warranty service.

Maybe you are looking for

  • Has anyone tried changing the drummer on a drummer part that has already been placed into a track stack?

    Has anyone tried changing the drummer on a drummer part that has already been placed into a track stack? I find that if I do that, the parts in the stack all get merged together with no way to expand them (ie the triangle you would click on to expand

  • Direct CTI Integration with Oracle Contact Center Form

    Hi, We are on 11.5.10.2 and we are trying to implement the "Direct CTI Integration" solution that Oracle suggested to enable Screen Pop in contact center form based on data coming from a third party CTI. In our case we are using Genesys TServers for

  • Why do some imported jpegs, psd files show as black rectangles?

    I recently scanned a dozen B&W 8x10 prints, plus a color  book dust jacket, into Photoshop, saving all to my desktop variously as jpegs, TIFFs and PSDs, then attempted to import the images to my iPhoto library. Some showed up fine but most were simpl

  • Saving PDF "sequential" (like by date or dep. variable...)

    Hello Team :-) A potential client asked me for help. He needs "fairly standard purchase orders and quotation forms", but "would like the auto save or save buttons that use form fields to name the file"... he further wrote "and the equal of "macros" t

  • Adobe Lightroom 5

    Hi. I am interested in purchasing the Adobe Lightroom 5 software for my son.  I am confused about the options available. I see that you can download a photography package from Adobe for a monthly fee.  I also see that you can purchase the software fr