Add update rule for new key figure in one info struc

Hi, everyone
I would like to know how to add update rule for new key figure in one info struc.
Thanks ahead.
Eric

1)I have created the update rule for one info structure
2)add one key figure in the info structure due to business requirement
3)then I use MC25 to add update rule for the new key figure, but I find that there no relevant menu to do such operation.
Can anybody tell me how to do with it?
Any answer will be appriciated.

Similar Messages

  • To add new key figure in existing info cube (BI 7.0)

    I m using BI 7.0
    How can I add new Key figure in my existing info cube?
    Thanks
    KS

    hi,
    check the following the links
    http://help.sap.com/saphelp_nw04s/helpdata/en/58/85e5414f070640e10000000a1550b0/frameset.htm
    thread's regarding remodeling
    Remodeling Toolbox
    Remodelling option in 7.0
    https://www.sdn.sap.com/irj/sdn/advancedsearch?cat=sdn_all&query=remodeling+&adv=true&sdn_author_name=&sortby=cm_rnd_rankvalue
    hope this help you
    happy new year 2008
    regards
    harikrishna N

  • Update rules for 0PU_C02

    I am working on the Funds Management and the Standard Business content cube 0PU_C02, which pulls the data from 7 ODSs through the Update rules. The update rules does not have characteristics fields that needs to passed on to the cube, but it has the Key figure fields (0Amount) to pull. However, On looking in the Infocube content, the data are availble for the Characteristics field along with the expected Key Figure value.
    How is this situation possible, where we are getting the data (in the infocube) for the characteristics, which does not have any field specified in the Update rules. I checked other update rules too for getting to the bottom of this.
    Thanks

    Hi Saura,
    In the update rules screen, click on an update rule for the key figure (in column Ty.) In the screen that opens up you should be able to see update rules for the chars on the char tab.
    Hope this helps...

  • Adding a new key figure to Info Cube

    Can I add a new key figure to an existing Info cube in which data is loaded?
    Assume that In Info Cube we have the following.
    Stu Id -- Characteristic
    Maths , Physics , Chemistry -- Key figures
    These are the info objects which are already available and transfer rules are already available for the same in the infosource.
    Could any one let me know how to add one more new key figure (total ) , which is the sum of the three marks to the Info Cube and populate the data in to the same.
    I have tried the following steps ,  but could not get the solution.
    1). Create a new key figure info object (total).
    2). Add the same to the communication and pull the same into transfer rules of the existing info source and activate the same.
    3). Add the new key figure to the info cube.
    4). Open transfer rules for the info cube and change the mode from NO updation to Addition for the particular key figure (total).
       When I perform the 4th step it is giving a red symbol beside the key figure in update rules and I'm not able to activate the same.
    Any help on how to add key figures to update rules and transfer rules is highly appreciated and points would be assigned.
    Thanks

    1.add new Keyfigure to Infocube.
    2.Go to Update rules> go to update type of that Keyfigure>selct formula in update method>create new formula>here you can add up your 3 keyfigures-->OK.
    activate update rules and InfoProvider.Check all are active or not..
    by using Export generate datasouce ,you populate data(historical data)  to new keyfigure as well.Then you have to delete historical data requests.
    or iyou can create formula in query designer as well as srinivas suggested.that would be better option.

  • Adding new key figure in Info structure

    Hi all,
    I am in a need to add a new key figure to our info structure here in my company.
    The way I understand it is, it would be best to create a NEW info structure and copy all existing key figure and characteristic and then insert my new key figure into this and rewrite the macro if required.
    So my question is
    1. How to determine which info structure is currently in use in my company? If i check in MC89 - the key figures match what is in Info structure S076. So is it safe to assume that we are using standard S&OP in my company? Is that a correct way to identify the currently used info structure?
    2. For our KMAT, when i open a planned order I see that there in another info structure (not S076) under configuration tab. So can we have diff info structure in use at a same time ?
    Please guide.
    Thanks,

    Hi Nisha,
    1. First of all, How would I determine which info structure is being used at this time in my company?
    I need to know this so that when I am creating my own custom (S500 - S999) info structure, i can copy the existing KFs and Characteristics and add them to my info structure and then Add a specific key figure on top of that.
    Info structures are nothing but tables so in se16 you can check which are Info structures are having update values.
    Yes you can add the specific key figure on existing self defined info structure in MC22 after that you need to generate it.
    2. Can multiple info structure be in 'use' at the same time in any scenario? 
    For self defined info structure are application specific you can not have multiple info structure for same scenario. If you take the example of flexible planning with self defined info structure then you can transfer the demand from only one info structure.
    Regards,
    R.Brahmankar

  • No split for particular key figure while "Time Distribution in Update Rule"

    Hi experts,
    I wanted to have data in the infocube at day level. Currently it has only week level data. So I used "Time Distribution in Update Rule". Due to this am able to split 0Calweek data at 0calday.
    But while using   "Time Distribution in Update Rule" all key figures are getting split by same way. For e.g. key fig1 has week level data as 100. so after getting split in calday, it is apperaring as (100/7) 14.285 . for every day.
    But i dont want to happen this split for every key figure. For some key figures value "100" should be as it for every field in calday. for e.g. 100 should not get divided by 7 and posted as 100 only for all seven days.
    How can i achieve this? Is it possible if i write formula or routine for particular key figure so that split should not take place for that particular kay figure? Or is there any other to keep exception?
    Please help.
    Thanks

    Hi,
    This is one of the limitation of Time Distribution that you can not have it by individual key figure. Check the below article for more information,
    [http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/e0e1096a-e058-2c10-06b7-c66f9a82a9c8?QuickLink=index&overridelayout=true]
    I think in this case you will have to write individual routine for each key figure instead of Time Distribution approach.
    Regards,
    Durgesh.

  • How To Add New Key Figure in Manual Planning

    Dear All
    Please Help
    I Already implement BPS for 2 year.
    Now user want to add new key figure in Cube.
    I already add new key figure to cube and activated it.
    But in Manual Planning, The new key figure not show in selection
    what I must do?
    Please Help.
    Thanks

    Hi,
    not all key figure types are supported in BPS.
    1. All key figure types must have aggregation SUM, SUM.
    2. Supported key figure types:
    - amout
    - quantity
    - number (integer, float, dec)
    - time, only type DEC
    - datum, only type DEC
    All other key figures are filtered out and are not available in BPS.
    Regards,
    Gregor

  • Add of new key figure.

    Hi..
    is it possible to add new key figure in the planning table of the ICH.
    for ex. there are key fig like demand, planned receipt, firm order in the SMI Monitor (Supplier view of ICH) i want to add new key fig in that grid...is it possible..
    Plz suggest...
    Thanks in advance..

    Hi Rupesh,
    Were you able to achieve this? I would be really thankful if you could jot down the steps you followed towards achieving this.
    Thanks,
    Puja.

  • Hi Gurus, To Add New key figure in BW 3.5 flow ODS- Infoset

    Hi Gurus ,
    I have rquerimennt to add a new  keyfigure in ODS and then into  Infoset .  The histrorical data for this keyfigure is not needed . Can you please let me know what the are changes needed to be done in Transfer structure -> cs->updaterules->ods->infoset.
    should i delete data from dso before I add keyfigure?
    Rehards
    sriram

    Hi
    are going to get the values for the new key figure from source or is it going to calculate in BW side?
    If yes, then add that key figure in source DS, replicate the same BW system.
    Now add this key figure to your ODS and activate.
    create transformation for this. and activate.
    as this is key figure, you will get data for this in info set automatically.
    Regrads,
    Venkatesh

  • Add new key figure to an Infocube

    Hi Experts
    I need add two new key-figure to the Infocube with data.
    Can I do this, or I need have an empty cube in order to made the changes?
    Thank you in advance!

    Yes the same, no need to delete data unless you recategorize the existing characteristics the same is true for the ods too. Adding is not issue, only removing.
    thanks.
    Wond

  • New Key figures and Macro updates

    Hi,
    Is there a way to ensure that a change in the data view design  by adding additional key figures and changing the positions of the key figures/macros DOES NOT result in changes in Macros already present. This seems a little ridiculuous when i compare this to spreahseet functions, where only fixed references in the cells  are impacted by changes in rows and columns, adding columns and deleting rows etc, else the formulas/macros in excel adjust automatically. The Macros in my planning are adjusted and deactivated after inserting some more key figures and shuffling some up and down to organize the book for some new functionalities. Is there a report/technique to reset the macros so that they work as intended with proper references as defined.
    Regards,
    AS

    Hi
    As Somnath says this is unfortunately the "normal" behaviour of the system. The macro workbench basically allocates a number to each key figure internally, so if new key figures are introduced, or even if you change the order of key figures in the data view, then this can affect the macro functionality.
    As long as the new key figure is introduced and placed at the end of the list in the data view then this will not normally affect the macro, it just needs re-activating.
    I find it frustrating when I have to re-order key figures in a data view then I have to check all macros are still working correctly and that the key figures used in the macro are the correct ones but unfortunately SAP will just say "as designed"!! 
    Regards
    Ian

  • Addition of new key figure in ODS

    Dear all,
    In ODS, delta is loaded everyday through process chain. Now according to business requirement, we need to add one more key figure in it. I don't have to map it with any of the R/3 field. Only i have to create update routine to assign value in it using already existing key figure.
    Can i directly add new key figure in the ODS? Will it affect my data present in ODS as well as daily delta load process?
    If i can do this, can i assign exact 'key figure' value for the existing data also?
    Please guide me for the same. We are using BW 3.5.
    Regards,
    Omkar.

    Hi,
    I am not sure that it is true that you need to delete data.  I am sure one can add a field to the ODS without deleting it.  The field will remain blank after creation, unless you fill it:
    1.  manually using a flat file for past data; mapping will work for subsequent data
    2.  Use a self reference if the value is already present in another key figure.
    The change may take a long time to activate depending on the following:
    1.  Size of the ODS
    2.  Existence of indexes.
    However,  as you are running a delta you need to be careful of the delta queue if you also intend to touch the datasource.
    Cheers....

  • Adding new key figures to DP planning area

    I am using APO DP.
    When adding new key figures to a planning area, is there any way of avoiding having to deinitialise and then re initialise the planning area?
    Thanks for any advice on this...

    First of, let us know which version of DP are you using.
    If you are using 7.0, all you need to do is right click on your planning area and select Change Keyfigure setting and you should be able to update the key figures there.
    The below is from SAP help for SAP APO 7.0, you should be able to add the key figure without deinitializing the planning area.
    Key Figure Settings
    Here you can change the properties of the key figures of a planning area, if the planning area has already been initialized. You can also add or delete key figures. However, you can only delete key figures that are no longer used in planning books, data views, macros, or demand forecasts. You can find out in which objects a specific key figure is used with the where-used list.

  • Urgent: Error in uploading data in cube after adding new Key figure

    Hi Guys,
    I have added 1 key figure (DEC) to my existing cube. and proceeded as below:
    1. Deleted all data from cube
    2. activated the cube
    3. set Constant 1 for this key figure
    4. activated the transformation
    5. reated a new DTP
    But when i execute it, it gives me error. in updating to infocube ZSDBILL:
    Error while updating to target  ZSDBILL
    Process Terminated.
    all other steps in DTP are succesful like: extraction, error handling and transformation.
    There is no details in long text of these errors.
    Can anyone suggest whats the error stands for or what i am missing.

    Once logout and login back then again activate cube,transformation and run the DTP.
    Hope it helps you

  • How to append DATA_PACKAGE strucutre to include new key figures?

    Hi,
    Iu2019m a newbie to ABAP and need some help with a start routine in BW 3.5
    In the source DSO I only have  the u201CYTD amountu201D key figure. The destination DSO should also contain the key figures u201CCurrent month amountu201D (ZAMTMO) and u201CLast 12months amountu201D (ZAMTLTM). So in the transfer rule I want to have a start routine to do some calculations and add the 2 new key figures.
    I use an internal table LCYEARDATA do the calculations:
      DATA: LCYEARDATA type sorted table of /bic/aZHYP3_O00
            with unique key CALMONTH /BIC/ZHYP_ACC /BIC/ZHYP_ENTI
            /BIC/ZHYP_SUBA /BIC/ZHYP_VERS
            with header line.
    IF DATA_PACKAGE IS NOT INITIAL.
       LOOP AT DATA_PACKAGE.
    *Get the YTD This Month.
        READ TABLE LCYEARDATA
            WITH KEY
              CALMONTH = DATA_PACKAGE-CALMONTH
              /BIC/ZHYP_ACC = DATA_PACKAGE-/BIC/ZHYP_ACC
              /BIC/ZHYP_ENTI = DATA_PACKAGE-/BIC/ZHYP_ENTI
              /BIC/ZHYP_SUBA = DATA_PACKAGE-/BIC/ZHYP_SUBA
              /BIC/ZHYP_VERS = DATA_PACKAGE-/BIC/ZHYP_VERS.
          IF sy-subrc IS INITIAL.
              YTDTHISMONTH  = LCYEARDATA-AMOUNT.
    ENDIF.
    *Last 12 Months = (YTD Last Year - YTD Month Last Year) + YTD This Month
        LAST12MONTH = YTDLASTYEAR - YTDMONTHLASTYEAR + YTDTHISMONTH.
    *Save MONTHLYVALUE and LAST12MONTH to the DATA_PACKAGE.
         DATA_PACKAGE-ZAMTMO = MONTHLYVALUE.
         DATA_PACKAGE-ZAMTLTM = LAST12MONTH.
         modify DATA_PACKAGE.
        ENDLOOP.
    ENDIF.
    Since the DATA_PACKAGE have the same structure as the source DSO, and donu2019t contain the new key figures, I canu2019t add the new calculated key figures at the end of the loop. I get an error message saying that ZAMTMO and ZAMTLTM canu2019t be found.
    So the basic question is: How do I append the structure of the Data Package so it can include the new key figures?
    Best,
    Johan

    Hi Karsten,
      Similar post... have a look...
    Re: data package error
    DATA: varighed TYPE i.
    wa_temp type DATA_PACKAGE_STRUCTURE OCCURS 0
    WITH HEADER LINE.
    LOOP AT DATA_PACKAGE into wa_temp.
    varighed = 100.(<b>What this means....?? condition..?</b>)
    wa_temp-/bic/iotvarig = varighed.
    wa_temp-/BIC/IOTOBJFOR = 'TEST'.
    -->> <b>you have to write modify wa_temp</b>.
    modify wa_temp.
    ENDLOOP.
    REFRESH DATA_PACKAGE.
    LOOP AT wa_temp.
    APPEND wa_temp TO DATA_PACKAGE.
    ENDLOOP.
    Hope it Helps
    Srini

Maybe you are looking for

  • How can I force browser to open a pdf document in a new tab from another online pdf document?

    Hello everybody, I create the internal magazine in InDesign. Then I create a pdf document in which there are some URL. After having verified that every link works, I upload this pdf on our website to be read online. The pdf document opens in the brow

  • New MBP, but I can't get good color/contrast/density on my screen

    I have the matte screen. I did the "expert" calibration, but my screen still looks too bright, contrasty, and cool (blue). I have a 2-year-old PowerBook G4 and the color on that looks normal. (I used expert calibration on that one, too.) Any ideas? T

  • BADI after saving the billing document

    Hi Experts, Please tell me the BADI name which will be triggered after saving the billing doc Here once the customer billing document will be saved, BADI will update the equipment master. Regards, Sandeep Edited by: Sandeep Ballewar on Jul 1, 2010 11

  • SOAP Login Request Problem

    Hi, I have been trying to send a login request via Pear SOAP, without success.  Any ideas about what is wrong with the request? The Request: POST /dswsbobje/services/Session HTTP/1.0 User-Agent: PEAR-SOAP 0.12.0-beta Host: 192.168.130.52 Content-Type

  • Dynamically creating properties

    Hi, I'm migrating my application from NW 7.0 to NW 7.11 CE. Previously I dynamically created properties from my application and they were automatically created as onlinemodifiable = true. When I migrated my project the properties were no longer creat