Add z field in material master at plant level

I wanna to assign a new field in material master at plant level..
What settings should be done to do this?
Positive response will be highly appreciated.
Regards

hi,
You can define the field directly via assigning the field to field selection group...This could also be done at industry sector, plant level as well....
Check the path :
SPRO >> Logistics general >> MM >> Field selection >> Assign fields to field selection group...
SPRO >> Logistics general >> MM >> Field selection >> Assign field at plant
SPRO >> Logistics general >> MM >> Field selection >> Assign fields at industry sector level...
For this assign the field to the respective table and then provide it at OMSR...
Assign field selection group to it...
Then in OMS9 give the priority for hide/display/req/optional to field...
If you want this to be added in the new screen, then you have to make the settings under "configure the material master"...
Hope it helps..
Regards
Priyanka.P

Similar Messages

  • Add a field in Material Master-QM view

    The requirement is as...
    Create a field on the QM view of the material master MM01.  The field will be a check box.
    F1 help on this field should say “ Select ******** ”.
    Is there any BADI or any other way to achieve this?

    Hello Sumanth,
    For material master there is no concept like BADI. You will have to follow certain steps to do this.
    SPRO->Logistic General->material master->configuring material master->create program for customised screen.
    Execute this which will create a function group for you ZMGD1(say). Goto to SE80 select MGD1 function group, open screen section, select 3000 screen and right click, chose option of copy. In popup in the TO section enter ur SAPLZMGD1 screen 9001. this will copy the screen 3000 to 9001 in ZMGD1. Now goto screen painter and delete all the unwanted fields from the screen and create check box field. Save and activate. Now for processing in PBO u will have to have do as follows...
    PBO..
      MODULE BEZEICHNUNGEN_LESEN.
      module move_data_checkbox. <- created new
      MODULE SET_DATEN_SUB.
    has to be between BEZEICHNUNGEN_LESEN & SET_DATEN_SUB
    similarly for PAI same thing follows.
    Now go back to customising and goto Define structure of data screen for each screen seq. Select the seq which is most probably 01. click on data screen. Select the Quality screen and click on subscreen and here u overwrite an entry with 0001.
    01 20 4 SAPLZMGD1 9001.
    Save and try creating a material.

  • Mass deletion of material master at plant level

    Hi,
    Is there any way to flag materials nearly 500 Nos for deletion at plant level.
    Regards,
    Vengat

    hi,
    Use mass transaction for putting the delete indicator for the material master...this is to be done from MM17 tcode...
    and later they all could archived...Archive it from MM71 and can display this from MM72..
    Regards
    Priyanka.P

  • Transportation group field in Material master..Sales/Plant data tab.

    Hello Gurus,
    The transportation group field in material master is Material specific or a plant specific?? caz whenever i am changing this transportation group field in one plant it is also updating with the same value in all the plant for the common material even though the Company code and Country are different forall the plants.
    Hope to hear from you soon as its a very high priority production issue..
    regards
    Rikinl

    The transportation group field in material master is Material specific or a plant specific??
    Its material specific.  Even if you have multiple sales areas or plants and if you change the transportation group, the change will be applicable for those areas also.
    thanks
    G. Lakshmipathi

  • Base table name for fields from Material Master

    Hi All,
    I want base table name which holds all possible values of following column:
    1)Material Master : X-plant matl status from tab -basic data 1
    2)Material Master: X-distr.chain status from tab -sales org 1
    for example: Base table for Prod.hierarchy is T179/T179T.
    Many thanks to all
    Yogesh

    Thanks Mahesh but I know its value available in MARA table for eery material. But i want to know where all possible distinct values are stored?... In other word, when we click on button which is next to this field and from that list we normally select value and then assign to above fields. Where this list is stored for
    X-plant matl status
    X-distr.chain status

  • Control Code field in Material master- Foreign Trade imports tab

    Hello Experts,
    I am trying to understand the purpose of Control Code(MARC-STEUC) field in Material master- Foreign Trade imports tab. I am also interested in knowing where does this field appear in our PO.
    Please help..
    Manish

    Normally control code specifies the norm to follow by the supply plant for a sale of exposrts. each contry will have a set of rules to get follow as a stuatory . this code specifies the rules or certificates.
    http://help.sap.com/erp2005_ehp_04/helpdata/EN/93/7443a5546011d1a7020000e829fd11/frameset.htm
    may be comes in a sale order.
    Regards

  • Specific Field in Material Master

    Hi All,
    just some user can't see specific Field in Material Master with using MM03, but others people can. Where should  I change settings? Is it something to do with authorization?
    thank&regards

    >
    Jiami wrote:
    > Hi Biju, Pete
    >
    >
    > thanks for Support.
    >
    >
    > Material is created as ( Industry Sector: mechanical engineering
    >                                     Material Type: Trading goods)
    > Field name: Basic material (in Tab Basis Data 2).
    > 
    >
    > user can see Field now,
    > but just When we using MM03 in normal level, the Field will be displayed.
    > But after we given a plant, in Plan lever then we can not see this Field anymore in Tab basis Data 2.
    >
    >
    > thanks
    >
    > Jia
    execute OMSR,
    position on field MARA-WRKST
    click the button field selection  right of selection group
    you will now see which fields are assigned to the group
    and below you see in in which field reference the group is set to hidden.
    field reference is a multi usage, it can be for material type, for transaction, for industry .
    so you have to check at least the settings for your material, for the transaction where you get this effect and for the industry you material is created with.
    further there is a customizing transaction OMSA, which is plant specific field selection, and I guess that causes your effect.
    open it and see which selection group is assigned to it.
    then go back to OMSR and see what status is assigned to this field reference.

  • Maximum number of fields in material master

    Hi,
    Could you please help to understand how many fields can be added in material master Tab.
    Example - If we create new material master tab as additional data and would like to add some fileds in that tab, is there a limit we can't add more than certain number of fields.
    Please advise how many cloumns can be added as well in one tab.
    Example
    Material master additional data Tab (New)
    feild 1 description field 4 description field 7 ......
    field 2 description field 5 description field 8 ......
    field3 description field6 description field 9 ........
    I think the fields should be assigned to feild selection group which is reserved as for Z fields
    Please confirm if my understanding correct for Z fileds
    211-240 Reserved for customers
    As I think only 20 field can be assigned to field selection group but My question is can we assign more than one filed selection group to one material master tab. I mean to increase the number of field to be added in new additional data tab can we add 111-120 Reserved for customers and 211-240 Reserved for customers to one material master additional data tab.
    Thanks

    Hi,
    For add fields to material master, check Note 44410 - Integrating cust.-specific fields in matl master (and related notes).
    Other note useful to understand the range of customer names in SAP: SAP Note 16466 - Customer name range for SAP objects.
    I hope this helps you. If you need something else, let me know.
    Regards,
    Eduardo

  • Maintain Profit Center as mandotary field in Material Master

    Dear Experts,
    We would like to make Profit Center under Sales: General/Plant view as mandotary field during Material Master creation. Kindly assist me the path that where we can maintain this. Thank you.
    rgds,
    nantha

    Hi,
    Go to OMS9, Under Field Selection (Field Selection Group 1) screen tab, double click the material type for which you want Profit center as mandatory field.
    Scroll down to Selection Group "48", Select the radio button "Required Entry".
    Go to MM01, check under Sales: General/Plant, you will be able to see Profit Center as Mandatory field.
    Hope this will help you out.
    Regards,
    Vijay

  • Purpose of Cash Discount field in Material Master

    what is the purpose of Cash Discount field in Material Master. what does it control. do it link to SKTO anywhere?
    please explain

    Hi,
    Cash discount is applicable for this material or not..
    This is for Sales only..
    Pricing Procedure (RVAA01) and if you activate SKTV and SKTO Condition types
    Cash Discount can calculate before tax or after tax
    Condition Type- SKTV(Statistical Condition Type)---If you check requirement is "14" which says Discount before Tax( This will calculate from the Filed Material master "Cash Discount Indicator" ie "SKTOF"
    Condition Type-SKTO-(Statistical Condition Type)--
    >Requirement "9" Discount After tax - here also it will consider filed "SKTOF" ie "Cash discount indicator in material master.
    SAM

  • Maintenance of Z field in material master

    Hi All,
    Could any body pls let me know where can I maintain the selection option for Customized field in material Master.( Means F4 options for any z filed)
    Any help will be highly appreciated.
    Regards,
    Meenakshi

    take help of abap guy.
    regards

  • New standard field in Material master

    Hi
    I have to introduce "RETDELC" field in Material Master.
    The said field is already available in MARA table.
    The field is available only in ECC 6.0 version.
    I have introduced the field in Field selection group and make it optional at client level, material type level and Transaction code level (MM01,MM02, MM03).
    But stil, i could not get the same field in Material Master- Basic Material data-2 view.
    Any help please!
    Regards
    Prasad

    this fields domain is DFPS_RETDELC .
    DFPS stands for Defense Forces & Public Security.
    In order to use this industry solution, you need to activate additional business functions
    http://help.sap.com/erp2005_ehp_03/helpdata/EN/d8/686660a46d486e95f0a3588111376d/frameset.htm

  • 'Storage bin field in material master

    Can we increase character length of 'Storage Bin' field in material master so that bin details can be accomodated ?

    No you cant!
    Takehelp of some other field.(text field)
    Edited by: uttkarsh agrawal on Jan 30, 2009 3:11 PM

  • Hide field in material master

    Hi Friends,
    I want to hide a field in material master can some please give the step by step method of how to do the same.
    Regards,
    Wasim.

    Hi,
    Follow the steps to hide a field in material master:
    1.Just click the TAB ,(Which you want to HIDE )and get the field name (Press F1 & then in next screen click technical information)
    2. Use T.Code: OMSR and enter that field name and get FIELD SELECTION GROUP
    3. Use T.Code: OMS2 and click your material type(you used to create that material) and in next screen check Field reference ( you have assigned for the material type){{ ( example-->For ROH material type the "Field reference" is ROH)
    4. Now use T.code:OMS9, Double Click your "Field Reference" and select  FIELD SELECTION GROUP  & select round box of  HIDE  and save.
    Regards,
    Biju K

  • Add additional field in Vendor master data for VAT Reg. No.?

    Add additional field in Vendor master data for VAT Reg. No.?
    Hi I need to add one additional field for other VAT Reg. number in vendor master data FK01, We currently have two field
    Current Settings:
    Country : LFAS-LAND1
    VAT registration no.: LFAS-STCEG
    I need to add one additional field for text information. Is this possible?
    Thanks you very much
    Luis G.

    If you want to add new fields that are not possible from config (check with your consultant) you need to implement BADIs
    In SPRO, go to:
    >Logistics-General
    ->Business Partner
    -->Vendors
    --->Control
    >Adoption of Cusomter's Own Master Data Fields
    and read the documentation provided there.
    You will need to implement following BAPIs
    Processing Master Data Enhancements: VENDOR_ADD_DATA
    Customer Subscreens: VENDOR_ADD_DATA_CS
    I am not aware of any other way to add new fields to Vendor master (however, check with your consultant for config related screen modifications)
    Should you need any further info to implement it, post back (read it thoroughly first, it's quite self-explanatory).
    regards,
    Aabhas

Maybe you are looking for