Added Articles and ran snapshot, but the new tables not showing up

I have a publication that is running on 2012 SQL server.  I added several tables, some stored procedure and some views.  Then I selected 'view snapshot agent service' and selected start.  It says running, and then says '9 articles published'
(or something like that) but the number is incorrect.  It should be a LOT more than that.  Then when I look at the subscriber, it doesn't have the new tables.  Thanks for any help you can offer.

After creating a new snapshot did you start synchronizing the subscriptions which applies the schema and data for the newly
added articles
--Prashanth

Similar Messages

  • I connect my iPad to my PC and open iTunes, but the iPad does not show up in sidebar.  I want to sync. How do I do it?

    I have my PC on, then plug in my iPad (which is on) and open iTunes.  The iPad does not show up in the sidebar.  How do you get it to show up so that I can select the iPad and then configure the sync settings in each of the settings panes....hoping that these actually show up.
    In the manual it says "log in to your computer user account before connecting iPad".  I am the only user of this PC...does this mean some other user account.  I am confused.  I need "baby steps" to tell me how to do all this....very senior and just learning about this wonderful machine. I will very much appreciate your help.

    If you are the only user on your computer you probably don't have multiple user accounts set up and can disregard that.  If you are using iTunes 11 go to View>Show Sidebar.  Now see if your iPad appears under Devices on the left side when you connect it.  If it does, click on the name of your iPad on the left side and your iTunes sync settings options will appear in folders with tabbed headings to the right.
    If it doesn't appear on the left side, follow the troubleshooting steps shown in this article: http://support.apple.com/kb/TS1538.

  • Installed xmms and xmms-imms, but the plugin does not show up?

    Hi All,
    I have installed xmms and xmms-imms. Then I have started xmms. Then I looked at the plugins (options->preferences->plugins->general plugins). There I see IRman, Joystick and Song change, but no imms.
    I see libxxmsimms in the plugin directory:
    # ls -l /usr/lib/xmms/General/
    total 160
    -rwxr-xr-x 1 root root 43896 Nov 16 20:15 libir.so
    -rwxr-xr-x 1 root root 31576 Nov 16 20:15 libjoy.so
    -rwxr-xr-x 1 root root 23096 Nov 16 20:15 libsong_change.so
    -rwxr-xr-x 1 root root 58656 Jan 16 16:52 libxmmsimms.so
    When I start xmms I see the following messages in the console:
    [cedric@TV cedric]$ xmms
    libmikmod.so.3: cannot open shared object file: No such file or directory
    Message: device: default
    My versions:
    Xmms 1.2.11
    [cedric@TV cedric]$ /usr/bin/immsd
    immsd: version 3.1.0-rc10 ready...
    What can I check to get imms recognised by xmms?
    Best regards,
    Cedric

    If you are the only user on your computer you probably don't have multiple user accounts set up and can disregard that.  If you are using iTunes 11 go to View>Show Sidebar.  Now see if your iPad appears under Devices on the left side when you connect it.  If it does, click on the name of your iPad on the left side and your iTunes sync settings options will appear in folders with tabbed headings to the right.
    If it doesn't appear on the left side, follow the troubleshooting steps shown in this article: http://support.apple.com/kb/TS1538.

  • My Ipod WiFi shows the Ip Adress and Subent Mask but the router will not show when it says I'm connected

    When I try opening Safari it says cannot connect because not connect even though I am connected. When I go into the settings my Ip Adress and Subnet Mask show up but the router or DNS. I have tried resotring,resetting and forgetting the network but nothing has fixed it so far

    What iP address is shown?  If it starts with 169 yo never connect to the router.
    Have you tried powering off and then back on your router?
    Does the iPod successfully connect to other networks?

  • I install at the new update cc2014 but for some reason in my computer appear double app the old one and the new  but the new dose not gave the setup that I have in my old version! What happen ?

    I install at the new update cc2014 but for some reason in my computer appear double app the old one and the new  but the new dose not gave the setup that I have in my old version! What happen ?

    Seriously, I doubt that your answer helped Erik.  He has two issues.
    He installed the new program and has a double icon folders with software. One for the new &  one for the old.  (I have this same problem.)
    He must have attempted to open one of the products and no longer see his personal settings transferred over.  (The install will ask to have those settings migrating, but you have to accept it. eh, I could be wrong; but, that what i remembered doing.
    I concur with his first. 
    However, i can not get any of my products to work.  Ie. have to constantly click on icon to open; once open i get a unexpected error and have to close. I'm on a mac pro w/ latest os system.
    In addition, I have tried to uninstall the older by clicking on the application's manager icon.; Unfortunately, it shuts down at each attempt.  Therefore, I am unable to un-install the old product or the new. 
    Possibly, we were hoping that the new product would be simply updated if an old recent was already installed. 
    Instead, the installation simply created a new icon and the new folder with product.

  • I can't get my ipod touch to sync with my new computer. My old one died. I downloaded itunes and installed music but the ipod will not sync with this new computer. What do I do?

    I can't get my ipod touch to sync with my new computer. My old one died. I downloaded itunes and installed music but the ipod will not sync with this new computer. What do I do?

    You can only sync with one iTunes library/computer. To switch:
    Syncing to a "New" Computer or replacing a "crashed" Hard Drive: Apple Support Communities

  • I have a L7680 All in with two new print heads but the new cyan/magenta shows yellow monitor status.

    I have a L7680 All in with two new print heads but the new cyan/magenta shows yellow monitor status. Ink status, cyan more than 50% and magenta is a 25% w/no low ink warnings... Just ran a clean print head again, print out looks good now but the status of the new cyan/magenta shows yellow monitor status. Is it time to buy another..When I purchased this printer it had to be replaced 3 times because of problems... Just a lemon?
    thx for your help in advance...
    Jim

    Could you share a link to the page?
    Seeing it in context and in our browsers is much easier to debug.
    If not, make sure to run the validator here The W3C Markup Validation Service and clear out any problems. HTML errors, especially structural ones, will cause all kinds of display problems in various browsers/versions/platforms.

  • HT6012 In this new version Ability than original version of Export., In a lot of older Eprot several types of Vdo. But the new can not just mp4.

    In this new version Ability than original version of Export., In a lot of older Eprot several types of Vdo. But the new can not just mp4.

    Yes, the old album art view is gone, bu you can see the album art for a song that's playing by clicking on the art image and it will open a bigger view.
    Everything else in your post is a waste. I'm not going to spend time reading it. If - and I repeat if, you have a question on how to get the best out of the new look iTunes, post it. But don't spend your time in long rambling negative rants.

  • I am trying to read my iMessages from my iPhone 4S on my iPad 2, but the messages do not show up on my iPad 2. I made sure that the receiving email address is the same on both devices and both are signed into my single Apple account.

    I am trying to read my iMessages from my iPhone 4S on my iPad 2, but the messages do not show up on my iPad 2. I made sure that the receiving email address is the same on both devices and both are signed into my single Apple account.

    Is it possible that the person who sent the message to your phone sent it to your phone # instead?  Try sending a message to your phone via the email address and see if it shows up on the iPad.

  • My imac is not recognizing any external dvd writer drive. I have imac with Core i7 and Mac OS 10.6.8. I have tried external dvd writers from Samsung and Amazon Essentials but the computer does not recognize any of them. Which Dvd writer is compatible?

    My imac is not recognizing any external dvd writer drive. I have imac with Core i7 and Mac OS 10.6.8. I have tried external dvd writers from Samsung and Amazon Essentials but the computer does not recognize any of them. Which Dvd writer is compatible?

    I have an external firewire burner; it never shows on the desktop unless I insert a CD or DVD - that icon will then show (if I have my preferences set to show those on the desktop). Hae you checked in Disk Utility (Applications > Utilities) to see if it is listed under drives?

  • Need to send my back up email a reset security questions email but the option does not show when I click on password and security

    Need to send my back up email a reset security questions email but the option does not show when I click on password and security

    You need to ask Apple to reset your security questions; ways of contacting them include clicking here and picking a method for your country, phoning AppleCare and asking for the Account Security team, and filling out and submitting this form.
    (97456)

  • I cannot unlock my phone. When I hit the number the key is highlighted but the "dot" does not show in the passcode box. Have shut it off and restarted nothing. Held on/off and "square" key to reset but still nothing. Any ideas on how to resolve this issue

    I cannot unlock my phone. When I hit the number the key is highlighted but the "dot" does not show in the passcode box. Have shut it off and restarted nothing. Held on/off and "square" key to reset but still nothing. Any ideas on how to resolve this issue

    Connect to iTunes and try to reset it from there.

  • Recently, I can't get any sound from my game applications.  Sound works fine with video, streaming, etc, but not my game applications.  I've tried powering down and re-booting, but the sound does not return.  Can anyone help me?

    Recently, I can't get any sound from my game applications.  Sound works fine with video, streaming, etc, but not my game applications.  I've tried powering down and re-booting, but the sound does not return.  Can anyone help me?

    Have you got notifications muted ? Only notifications (including games) get muted, so the Music and Videos apps, and headphones, still get sound.
    Depending on what you've got Settings > General > Use Side Switch To set to (mute or rotation lock), then you can mute notifications by the switch on the right hand side of the iPad above the volume switch, or via control centre : swipe up from the bottom edge of the screen and it's the right-most of the 5 icons in the middle of it (if the icon is white then it's 'on', tap it to turn it grey and 'off'). The function that isn't on the side switch is set via control centre instead : http://support.apple.com/kb/HT4085

  • After update to IOS 6.0, on the iPhone 4 and 4s, emails can not be forwarded. I tried to resync, but the update does not show the forwarding buttons anymore.

    After update to IOS 6.0, on the iPhone 4 and 4s, emails can not be forwarded. I tried to resync, but the update does not show the forwarding buttons anymore.

    Have the same issues here, 3GS 5.0.1. Did you find any solutions until today ?
    I restored my phone, power up/down but nothing helps with my issues
    greetings
    /Edit:
    Maybe I should read carefully your text so I can give you some more information.
    my phone was updated via itunes.
    some hours ago the phone charged up to 5% but than directly draining to zero...
    can't help me with these issues...

  • I manually add my songs to my iphone, after dragging from itunes, it shows the syncing message but the songs do not show up on the ipod. I was able to copy songs successfully before.

    I manually add my songs to my iphone, after dragging it from itunes, it shows the syncing message but the songs do not show up on the ipod. I was able to copy songs successfully before. Please help.

    Now title changes are showing up on my iPod, but not artist and album changes

Maybe you are looking for

  • ICal has stopped highlighting the current day in month view.  Is there some way to reinstate this?

    It still highlights the day in day and week views.  Not sure when this behavior began, but it may have been after installing ColorMunki software.  Thanks for any suggestions.

  • Multiple signatures in email

    I want to be able to pick up (and send) work email with my work signature, and personal email with a different signature from my Touch. Mail only seems to support one signature. Is there a get-around for this? Both are running from separate gmail acc

  • Problems using Apple Remote

    I put this question on iTunes discussion but got no response so I will again try here. Recently imported my modest music collection from my old G3 CRT to a new Mac Mini by linking the two machines and then dragging the music library and songs over. i

  • Secure PDF using certificate

    Hi All, I'm developing a secure PDF using certificate. When I open the PDF I get acrobat security saying " A digital ID was used to encrypt this document but no digital ID is present to decrypt it.Make sure your digital ID is properly installed or co

  • Where can I download Group Policy Health Check Tool v.1.0?

    I once saw a screenshot of this tool (Group Policy Health Check Tool v.1.0) from some document.  However, when I search on line for it, it looks like this tool simply does not exist.  Can someone help me?