Adding a new stroke through the Appearance Panel?

Are there any reasons to add a new stoke in the Appearance Panel VS. just doing it in the Control Panel or in the Toolbox?

Here is a visual showing yu how three strokes are being applied to one Type Object.
BTW you could thank Scott for explaining this for you.

Similar Messages

I can't install correctly Adobe Captivate 8, cause a message of no connection to internet appears (I am connected to internet). Even though, when I want to unistall through the control panel it doesn't let me, anyone knows how to uninstall it??

I can't install correctly Adobe Captivate 8, cause a message of no connection to internet appears (I am connected to internet). Even though, when I try to unistall through the control panel it doesn't let me, an Uninstall Failed message appears, anyone knows how to uninstall it??
I've already tried Adobe Cleaner Tool, but it doesn't work, as the program is not listed as one of the proposed
Does anyone know how to uninstall it??
Thank you

Which are you after... installing Captivate 8 or uninstalling it (whatever "it" is)?
Sign in, activation, or connection errors | CS5.5 and later
https://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

I tried repairing iTunes through the control panel but there is a new message that "the file 'itunes library.itl' could not be read because it was created by a newer version of iTunes"

I tried repairing iTunes through the control panel but there is a new message that "the file 'itunes library.itl' could not be read because it was created by a newer version of iTunes"

Unless you deliberately downgraded iTunes this may be a sign of a corrupt library. See Empty/corrupt library after upgrade/crash.
tt2

Can I make another website using iWeb,then publish it to a different server through the SMTP panel on iWeb

Can I make another website using iWeb, and then publish it to a different server through the SMTP panel on iWeb, even though I have a website published on mobile me, can I just use the SMTP engine to publish a different site but to a different server, that's the question I'm asking. I'm hoping for a quick reply. Thank you for your time in reading this.

Yes. You can do it one of two ways:
1 - select FTP Server in the Publish To menu (click on the site folder to get to the options) and enter the FTP address, username and password and publish as you would if using MMe.
2 - select Publish to Folder and publish. Use a 3rd party FTP client like Cyberduck to upload the site files to there server using the FTP address, etc.
OT

CProjects - Adding a new field to the detail screen of object link

Hi All,
I've a requirement of adding a new field to the detail screen of object link. But the field is a combination of 3 other standard fields.
Please let me know how could i realise this functionality?
Thanks in advance.

Hi Srini,
Thanks for your Reply
I have kept 01 against the field BSEG-AUGDT and selected the preselect check box also.
But still that field is not visible in the dynamic selection screen.
Thanks
Ajay.D

Adding a new field to the search help exit

Hi friends,
adding a new field to the search help exit. How does it work ?
Thanks in advace
Ilhan

The search help exit allows you to modify functionality of search help. If you add a new field to the
parameter list that is not contained on the selection method you can manually populate it within the search
help exit.
This would be performed within the u2018STEP DISPu2019 section. Once within this section all search help
data has been retrieved and is stored in table RECORD_TAB (record_tab-string) as one long string value.
Therefore you need to read table SHLP in-order to locate position of value within string.
Example:
To find position of personnel number (PERNR) within elemenory search
help M_PREMN you would use the following code:
Loop at record_tab.
     read table shlp-fielddescr into wa_shlp
                                   with key tabname   = 'M_PREMN'
                                            fieldname = 'PERNR'.
You could then use this information in the following way, for
example, to find a persons organisation unit:
      select orgeh endda
        up to 1 rows
        from pa0001
        into (ld_orgeh,ld_endda)
       where pernr eq record_tab-string+wa_shlp-offset(8)
                                                  u201Cpernr length is 8
       order by endda descending.
      endselect.
      select single orgtx
        from t527x
        into ld_orgtxt
       where orgeh eq ld_orgeh and
             sprsl eq sy-langu and
           ( endda ge sy-datum and
             begda le sy-datum ).
If you have added a new field to the end of the parameters list
the next step is to populate it by adding this data to the end of
the record_tab string:
concatenate record_tab-string ld_orgtxt into record_tab-string.
modify record_tab.
endloop.

Adding a new field to the Address Data for a business partner

Hi Experts,
I am trying to add a new custom field to the address data (all structures and tables) that is linked to a business partner on SAP CRM via EEWB. Structure is the address structure wthin BUS_EI_EXTERN. Table is BUT020. I have been told that it is not possible as there is no Business Object that allows this. When doing an EEWB, the only business object is BUPA, which when selected, adds the new custom field to BUT000. I would like the field to be added to BUT020 (Address Table). This leads me to believe that there is no standard way of doing this, which ultimatley means that it would need to be done manually. Please help me with this predicament.
Regards
Yusuf

The search help exit allows you to modify functionality of search help. If you add a new field to the
parameter list that is not contained on the selection method you can manually populate it within the search
help exit.
This would be performed within the u2018STEP DISPu2019 section. Once within this section all search help
data has been retrieved and is stored in table RECORD_TAB (record_tab-string) as one long string value.
Therefore you need to read table SHLP in-order to locate position of value within string.
Example:
To find position of personnel number (PERNR) within elemenory search
help M_PREMN you would use the following code:
Loop at record_tab.
     read table shlp-fielddescr into wa_shlp
                                   with key tabname   = 'M_PREMN'
                                            fieldname = 'PERNR'.
You could then use this information in the following way, for
example, to find a persons organisation unit:
      select orgeh endda
        up to 1 rows
        from pa0001
        into (ld_orgeh,ld_endda)
       where pernr eq record_tab-string+wa_shlp-offset(8)
                                                  u201Cpernr length is 8
       order by endda descending.
      endselect.
      select single orgtx
        from t527x
        into ld_orgtxt
       where orgeh eq ld_orgeh and
             sprsl eq sy-langu and
           ( endda ge sy-datum and
             begda le sy-datum ).
If you have added a new field to the end of the parameters list
the next step is to populate it by adding this data to the end of
the record_tab string:
concatenate record_tab-string ld_orgtxt into record_tab-string.
modify record_tab.
endloop.

ADDING A NEW ITEM IN THE CREDIT REQUEST DETAILS PAGE.

Dear friends,
Please help me with this scenario.Thanks so much for your help.
Task: ADDING A NEW ITEM IN THE CREDIT REQUEST DETAILS PAGE.
Need to create a new item on this page called "approver notes" (column notes).
Can this be achieved by personalization?
Scenario:
On credit request details page disputed invoice number, request date, status, bill to, ship to, etc are displayed.
When the status is "not approved”, item should be displayed along the "rejected" comment.
If the status is other than "not approved" then the item should not be displayed.

what page is this ? are you sure it is a OAF page ?
If it is a OAF page, you would need to extend the controller to fire a partial action for the item and then control the display property of the comments field
Tapash

Adding a new server in the menu of SAP GUI 640

Hello Everybody,
While adding a new server to the menu of SAP GUI 640 using Server Tab after entering all details like :
1] SAP System ID
2] Hostname where message server is running
3] SAP ROUTER :None
After filling all the above details and after pressing the Generate List Button I am getting the following error .Please help me to know why this error is coming and suggest a solutio for adding a new server to my SAP GUI 640.But I am able to add a new server using User defined tab but I want to add a new server using Server tab.
Below is error details which I am getting:
Error:service'sapmsSBX'unknown
Wed Jan 09 06:41:13 2008
Release 640
Component NI(network interface),version 37
rc=-3,module ninti.c,line 463
Detail NiPGetServByName: service 'sapmsSBX' not found.
Thanks and Regards,
Ashish Thakkar.

Hi,
check etc/services for sapmsSBX entry. If missing - add it (i.e. sapmsSBX 36XX/tcp - where XX is your instance no.)
Add an extra [Enter] after last line of etc/services.
Regs,
FS

Firefox 6 will not load when I click the icon. I have tried to uninstall it, both through the control panel and geong straight to help.exe. In both cases nothing happens. How do I uninstall this program?

Firefox 6 will not load when I click the icon. I have tried to uninstall it, both through the control panel and going straight to help.exe. In both cases nothing happens. How do I uninstall this program?

Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]]
* [[Troubleshooting plugins]]
If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
* Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
* Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")

Error while adding a new method to the Session Bean

Hello everyone. I'm using jdev 11g, ejb, jpa & jsf. Everything works fine. But when I try to add a custom method to the Session Bean, I'm having an error.
Here is my steps:
1) I added a new method to SessionBean.java. Something like this:
public void Hello() {
System.out.println("Hello!");
2) Then using Structure palette I exposed this method through Local interface and created data control
3) Finally, I made a command button binded to this method (just droped it from DataControls.dcx to my page)
When I start the page and click the button, I'm having the following error:
Error 500--Internal Server Error
javax.faces.el.EvaluationException: Method not found: Hello.execute(javax.faces.event.ActionEvent)
     at org.apache.myfaces.trinidadinternal.taglib.util.MethodExpressionMethodBinding.invoke(MethodExpressionMethodBinding.java:58)
     at org.apache.myfaces.trinidad.component.UIXComponentBase.broadcastToMethodBinding(UIXComponentBase.java:1227)
     at org.apache.myfaces.trinidad.component.UIXCommand.broadcast(UIXCommand.java:183)
     at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent$1.run(ContextSwitchingComponent.java:70)
... (I've truncated the log because there is nothing important in the missing part)

Yes, I have binding in the page def. Everything is correct there:
<methodAction id="Hello" RequiresUpdateModel="true" Action="invokeMethod"
MethodName="Hello" IsViewObjectMethod="false"
DataControl="PriceServiceLocal"
InstanceName="PriceServiceLocal.dataProvider"/>
I've droped the method from the Data Controls panel

Adding a new button in the PO search summary in SRM 3

Hello gurus,
my requirement is to add a new button in the search summary for PO in SRM. Here's the task: every time a search is executed, the result is a list of purchase orders and every item has on the left two icons, "Show PO" and "Modify PO". There are merely a shortcut that brings the user to the PO screen in which the document is shown/can be modified.
These two buttons are standard... my task is to add a new button in the template, "Copy PO", which should be a shortcut to the omonimous button which is present in the PO view screen. So I think this new button should work as the two standard ones.
In order to do so, I looked into the proper template: SAPLBBP_PDH_SEARCH, screen 3003, which belongs to the package BBP_PRODOC_C (ITS service BBPSEARCH).
I tried to "duplicate" the part referring to a standard button (e.g. the "display icon" chunk), obtaining a new chunk which represents the new button in the template.
And... it works, in the sense that the button is visible and clickable. So far so good. Here's the questions since I'm not absolutely an expert on Jscript... My button, once clicked, triggers my FORM (PO_COPY) which should receive the header GUID of the Puchase Order.
In debug I've seen that the form fails since it does not receive any parameter, and that's probably related to this section:
(angle brackets omitted, it gave me an error posting tags in sdn)
"JavaScript:HyperSubmit('PO_COPY', '`MAINLIST-LINE_NUMBER[j].value`')"
The problem is I did not understand how to check for possible parameters of this HyperSubmit method. Also, I'd like to check what's the structure of MAINLIST (as far as I've seen, MAINLIST-LINE_NUMBER[j].value is a parameter passed to the form) but don't know how to see that. Can anyone please direct me through these passages? Thanks in advance.

Hi Matteo Montalto,
Please let me know how you added new button.
Regards,
neelima

Is there any way to prevent excess rows from being added to a table on the front panel?

Whenever I programmatically add rows through a property node I can still go into the front panel and keep adding additional rows through the table. Is there any way to prevent this "excess scrolling"? Maybe grey out the rows or something?
At least I have chicken

Hello Labviewleroy,
You should be able to right click on the table on the front panel and select
Visible Items>>Horizontal Scrollbar or Vertical Scrollbar
You could also consider changing their visibility programmatically using a property node for the control or indicator that you are referencing. You can create the property node by right clicking on the control on the block diagram and selecting
Create>>Property Node>>Visible Items>>Horizontal Scrollbar or Vertical Scrollbar
Cheers,
-Joel
Motion PSE
National Instruments

Error while adding a new field to the Segment in we31

Hi ,
I am getting error when i am trying to add the new field to the cust. segment.
It is released for the adding the new fields i am cancelling the release , but i got a message like this
Error while resetting release of segment 'segment name'.
it is comming from the message class EA and message number 259.
Thanks in advance.
Reagrds,
bharani

Hi,
Have you tried Cancelling the release before adding the version?
Select the active version of the IDOC Segment and cancel its release first. Only then you will be able to add a version.
Please let me know if it worked!
Vijay

Adding a new listener in the exisiting listener file

Hi,
I am trying to add a new listener entry into the exisitng listener file for a db which is on some network machine. The listener file is for 9idb on a linux box. I am tryin to create a listener for the network db since i cannot directly connect to that network machine however i can connect very well through the linux server on which 9idb is present.
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = DAYBREAK)(PORT = 1521))
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC))
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = /orainst/ora9idb/product/9.2.0)
(PROGRAM = /orainst/ora9idb/product/9.2.0/bin/extproc)
(ENVS = "EXTPROC_DLLS=ANY")
(SID_DESC =
(GLOBAL_DBNAME = dlsdev)
(ORACLE_HOME = /orainst/ora9idb/product/9.2.0)
(SID_NAME = dlsdev)
(SID_DESC =
(GLOBAL_DBNAME = dlsqa)
(ORACLE_HOME = /orainst/ora9idb/product/9.2.0)
(SID_NAME = dlsqa)
-----NEW LISTENER ENTRY------------------
LISTENER_OTH =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 10.80.125.106)(PORT = 1521))
SID_LIST_LISTENER_OTH =
(SID_LIST =
(SID_DESC =
(GLOBAL_DBNAME = orcl)
(ORACLE_HOME = /orainst/ora9idb/product/9.2.0)
(SERVICE_NAME = orcl)
I've checked for the ip, port and the sid and they all are correct.
Now when i try to start this new listener from server below is wat i get:
lsnrctl start listener_oth
LSNRCTL for Linux: Version 9.2.0.4.0 - Production on 19-NOV-2007 16:22:52
Copyright (c) 1991, 2002, Oracle Corporation. All rights reserved.
Starting /orainst/ora9idb/product/9.2.0/bin/tnslsnr: please wait...
TNSLSNR for Linux: Version 9.2.0.4.0 - Production
System parameter file is /orainst/ora9idb/product/9.2.0/network/admin/listener.ora
Log messages written to /orainst/ora9idb/product/9.2.0/network/log/listener_oth.log
Error listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=10.80.125.106)(PORT=1521)))
TNS-12545: Connect failed because target host or object does not exist
TNS-12560: TNS:protocol adapter error
TNS-00515: Connect failed because target host or object does not exist
Linux Error: 99: Cannot assign requested address
Listener failed to start. See the error message(s) above...

Are you trying to start a separate listener on the same port on the same box? Two processes can't run on the same box on the same port. If you are trying to add another DB to the existing listener you can add it to the sid_list portion of the listener.ora file.

Adding a new stroke through the Appearance Panel?

Similar Messages

Maybe you are looking for