Adding a non-wireless PC to an Airport Extreme network with WDS, or extend

I have an Airport Extreme base station (802.11n), a Time Capsule, and a cable modem. Currently the Time Capsule is wired by WAN to my cable modem. It is broadcasing a wireless network to my iMac Intel Core2Duo running 10.5.2 and my AppleTV, and my MacBook Pro running 10.4.11. I'd just acquired a Windows XP PC with no WiFi card but a built-in NIC card. I'm having difficulty adding the Airport Extreme base station to the network of the Time Capsule, so the non-wireless PC can use the LAN port of the Airport Extreme and pickup an internet connection. I don't want anything connected to the WAN port of the Airport Extreme. The PC can't be moved to the room with the cable modem. Should I:
1. Set it up from the Airport Utility of my iMac or MacBook Pro?
2. Switch the placement of the Airport Extreme and Time Capsule?
3. What steps should I take from Airport Utility, to add a reset Airport Extreme or Time Capsule to the network already tied to my Cable modem?

Since both of your base stations are 802.11n, I suggest that you use the "extend a network" feature available to these, instead of creating a WDS.
1. Set it up from the Airport Utility of my iMac or MacBook Pro?
Your choice, you could use the AirPort Utility from either of these Macs to configure the base stations.
2. Switch the placement of the Airport Extreme and Time Capsule?
I'd suggest leaving the Time Capsule connected to the modem and use the AEBSn to extend its wireless network.
3. What steps should I take from Airport Utility, to add a reset Airport Extreme or Time Capsule to the network already tied to my Cable modem?
Here are the basic steps to configure the extended network:
o If practical, place the base stations in near proximity to each other during the setup phase. Once done, move them to their desired locations. You may also want to temporarily connect the AEBSn directly to one of the TC's LAN ports during setup.
o Open AirPort Utility and select the TC.
o Choose Manual Setup from the Base Station menu.
o Click AirPort in the toolbar, and then click Wireless.
o Choose “Create a wireless network” from the Wireless Mode pop-up menu, and then select the “Allow this network to be extended” checkbox.
o Next, select the AEBSn, and again choose Manual Setup from the Base Station menu.
o Choose “Extend a wireless network” from the Wireless Mode pop-up menu, and then choose the TC's wireless network from the Network Name pop-up menu.
o Click Update to update the base station with new network settings.
o Upon completion of the setup, you can now relocate the AEBSn to its desired location.
(ref: Page 46 of "Designing AirPort Networks Using AirPort Utility.)

Similar Messages

  • Can't join the airport extreme network with my iphone~~please help

    Can't join the airport extreme network with my iphone

    What radio mode do you have the 802.11n AirPort Extreme Base Station (AEBSn) configured for? (ref: AirPort Utility > Select the AEBSn > Manual Setup > AirPort > Wireless > Radio Mode = ?)

  • Extending Airport Extreme network with Airport Express using WDS

    I have been having some trouble using WDS between an Airport Extreme and Express, with the Extreme acting as the internet router in the network.
    Both devices have been updated with the lastest firmware.
    I am using Airport Utility 5.5.1
    *Airport Extreme Configuration*
    *Wireless Tab*
    Wireless Mode: Participate in a WDS network
    Allow Network to be extended: Checked
    Radio Mode: Auto
    Security: WPA/WPA2 Personal
    Channel Selection: Manual (Same as my Express)
    *WDS Tab*
    WDS Mode: WDS Main
    Allow Wireless Clients: Checked
    WDS Remotes: (MAC of my Airport Express)
    *Airport Express Configuration*
    *Wireless Tab*
    Wireless Mode: Participate in a WDS network
    Channel: (Same as my Extreme)
    Network Name: (my network name)
    Wireless Security: WPA/WPA2 Personal
    Allow this network to be extended: unchecked
    Radio Mode: 802.11n (802.11 b/g compatible)
    *WDS Tab*
    WDS Mode: WDS Remote
    Allow Wireless Clients: checked
    WDS Main: MAC of my Airport Extreme
    I think that covers the pertinent stuff. If there's anything else that might be useful, please just say so.
    So, the Extreme is green-lit, working fine. Wireless clients can connect to it just fine. On the Wireless Clients page the MAC of my Express is showing up, with a type of WDS listed. It does not, however, show up under the DHCP clients section.
    The Express is yellow-lit. Sometimes after a setting change it goes green for a minute or so, then back to yellow, reporting a WDS Error ("the AirPort Wireless device is set up as part of a WDS network, but no other AirPort wireless devices were found").
    The Airport Express is ending up with an ip address of 169.254.49.198 (an automatic private). It seems it's not getting an ip from the Extreme's DHCP.
    Do I have some sort of authentication issue here? Honestly I'm totally baffled.
    Any help with this would be greatly appreciated.
    Would the routers' logs be of any help?
    Thanks
    Message was edited by: Xaniel

    Wait, just did a bit more reading. Am I correct in assuming now that the "Extend a network" option will function as a wireless repeater, with no ethernet connection to the main router required
    Yes. This will provide much better wireless performance...and...its much easier to configure.
    On your AirPort Extreme, open AirPort Utility - click Manual Setup
    Click the Wireless tab below the row of icons
    Wireless Mode = Create a wireless network
    Make sure there is a check mark next to "Allow this network to be extended"
    Update to save settings
    On the AirPort Express, open AirPort Utility - click Manual Setup
    Click the Wireless tab
    Wireless Mode = Extend a wireless network (hold down the option key when you click on the selection box if you do not see this setting)
    Wireless Network Name = Click on the selection box and name of your AirPort Extreme network should appear
    Check mark next to Allow wireless clients
    Wireless Security = Exact same setting as the AirPort Extreme network
    Wireless Password = Same password as the AirPort Extreme network
    Confirm Password
    Update to save changes
    A good starting location for the Express is a point that is about 1/2 to 2/3 the distance from your AirPort Extreme to the area that needs more coverage.
    The ethernet port on the Express is also enabled, so you can connect an ethernet device if needed. Post back to let us know how things are working.

  • Will Airport Extreme Network with Panasonic Viera TC-P50ST30

    Will Airport Extreme Network work properly with Panasonic Viera TC-P50ST30 HDTV?

    I don't have this particular model, but I do have a Panasonic TC-P42GT25 plasma which has no difficulties accessing the Internet through my 4th Gen AirPort Extreme Base Station or 4th Gen Time Capsule.

  • HT3500 To add a wireless adapter to my Airport Extreme network using WPS, documentation recommends adding it under "Add wireless clients" in Airport Utility but there's no such an item anywhere in v6

    I am trying to connect an Iogear Wifi adapter from my home entertainment center to my Airport Extreme home network (secured with personal WPA) using WPS. Apple's support literature says to do this through Airport Utility (v.6) choosing Manual Setup from Base Station Menu and Add Wireless Client. After hours of searching and fiddling I cannot find "Manual setup" or "Add Wireless Client" in the Airport Utility (v.6). HELP.  andy

    Those instructions are for Airport Utility v5.5.3 or v5.6. As a matter of fact, Airport Utility 6.0 does NOT have that options. So assuming you have Mac OS X Lion 10.7.4, you have to download and install Airport Utility 5.6 for Mac OS X Lion. Then follow those simple instructions you have.

  • How do I maintain my Airport Extreme network with my new Comcast wireless gateway?

    Hi all,
    I've just signed up Internet access through Xfinity. Today, they sent me a new wireless gateway, which I am willing to use. But I would also like to maintain the network I've currently been using, which is an Airport Extreme hooked up to our DSL modem. Currently, I have a Brother wireless printer, our TiVo, and a Roku streaming stick on this network, as well as all of our Macs and mobile devices. I have been reading about "bridge mode," and selecting this mode once my AE is hooked up through the Ethernet cable to our new wireless gateway seems like the way to go if I'd like to keep the AE network I have now. Then, I can select either the new Xfinity network or the AE network, depending on my need. Is that correct? Will I have to reassign all of these peripherals to the AE network once it's been placed in bridge mode, or will they all be able to find that network automatically once the AE is plugged into the new modem/router? Also, is there a way to connect the AE to the new Xfinity equipment wirelessly, or is it best to connect through Ethernet? I have probably betrayed my ignorance more than a few times in this post, so please be kind and explain it to me like I'm a seven-year-old. Thanks in advance for any and all help!
    -B

    Call Comcast and ask them for instructions to configure their "wireless gateway" as a simple modem. Sometimes the terminology they use is "transparent bridging". Have them walk you through it, since all such devices are configured differently. It is usually through a web page but you will need a password to change its settings. You ought to turn off its wireless network also, so ask about that too.
    Then, you will have essentially what you have been accustomed to using: an Extreme connected to a box with an Ethernet cable, doing everything it used to do when you had DSL. Your AirPort Extreme is almost certainly a better router than whatever junk Comcast supplies, and to reconfigure it as a bridge would remove all the features that make it so.
    You probably won't need to change a thing on your Extreme, other than to unplug it and plug it in again after reconfiguring the "wireless gateway".

  • Multipmultiple Airport Extreme Base Stations: WDS Or "Extend Wireless Network" To Have Wired -- Wireless Bridge?

    Hello there!
    I've been looking for this info, but have as yet been unable to find it. Here's my scenario:
    I have two Airport Extreme Base Stations (both are dual band) and 3 airport expresses. The main internet connection in my house is in one room, where I have an AEBS as the main wireless router. In another room, I have a bunch of ethernet-only devices. I'd like to use the 2nd AEBS in this room, plug the ethernet devices into it and have the 2nd AEBS act as a wired <--> wireless bridge (connected to the same wireless network as the 1st AEBS). I've attempted this via "extend a wireless network," but the ethernet devices don't get past the AEBS they're plugged into. Should I instead be implementing WDS?
    I mention the airport expresses as I'd like to have airtunes & wireless signal in other areas, but would like to keep the set-up as simple as possible (i.e., not config the AXes for WDS unless it's required).
    Thanks in advance for any help!

    Unlike the 802.11n AirPort Express Base Station (AXn), the 802.11n AirPort Extreme Base Station (AEBSn) cannot be configured as a wireless Ethernet bridge.
    However, there are at least two ways to configure it to provide wired clients access:
    Connect the second AEBSn back to the first by Ethernet; reconfigure the second AEBSn as a bridge and disable its wireless radios, or
    Reconfigure both AEBSns into an extended wireless network. For 802.11n AirPorts, this would be called a dynamic WDS. The AEBSn, connected to the Internet would be the "main" base station and it would only require that you enable the "Allow this network to be extended" option in the AirPort Utility. The extending AEBSn would need to be configured with the option, Wireless Mode = Extend a wireless network, enabled.
    In both configurations, the second AEBSn's Ethernet ports would be enabled for wired clients.

  • Trying to extend my airport extreme network with an airport express

    I´m trying to extent my network with an airport express 802.11g.
    I´ve been fallowing the guide:
    http://support.apple.com/kb/HT4259
    however, when I´m trying to configure the extended wifi base station ( point 8.)  it won´t let me choose "extend a wireless network".
    The only options I have is "create network", "join network" and "participate in a wds network".
    I´ve been trying to find a solution all day.
    Is there anyone out there who has hade the same problem or knows what it could be?
    I´ve made sure that my base station connected to the internet through ethernet has checked the "allow this network to be extended"

    however, when I´m trying to configure the extended wifi base station ( point 8.)  it won´t let me choose "extend a wireless network"
    Unfortunately, the older AirPort Express 802.11"g" model does not have a setting to "extend a wireless network", so it cannot be used the way that you want.
    The article that you reference should be clear about this:
    This article explains how to set up an 802.11"n" extended wireless network.
    You need to use one of the newer AirPort Express 802.11"n" models to gain the ability to "extend a wireless network".

  • Extend AirPort Extreme Network with AirPort Express- Setup assistance

    I have an AirPort Extreme working nicely and connected directly to my Comcast cable modem.  I would like to extend my network for greater coverage upstairs and to run an upstairs printer on the network.  I cannot get the Express connected as an extension to my existing wireless network.  What am I doing wrong? 

    Hi Bob. Do you mind if I listen in on this thread? I am trying to extend a network the same way JVT1057 is, yet my Mac mini in the Airport application cannot find the Express device. The Extreme device is up and working well, and is "seen" by the mini in the utility, but not the Express device. I need a stronger signal in a home office upstairs and would like to connect a networked printer here in the office via the Express.
    What am I doing wrong? I, too, have specifiied on the Extreme menus that I want the network to be extended.
    Thanks in advance for any help you can provide.

  • Extending and airport extreme network with wired connection to a express

    I am getting fed up of deadspots in my house that now seem to have become much worse recently. After giving up on configuring my extreme router to avoid issues I now want to extend the network.
    If I put in a network cable from the extreme router to an airport express on the other side of the house can this be configured to be the same wireless network?
    I know express routers have an option of extending the network is this for wired or wireless or both and if I do this will it show up as one wireless network with no interference issues?. At the moment I am planning on getting an express airport and using some of those power cable ethernet adapters to link the two routers up should this work okay?
    Many thanks
    Andy

    Welcome to the discussions, Andy!
    If I put in a network cable from the extreme router to an airport express on the other side of the house can this be configured to be the same wireless network?
    Yes, post back if you need more details about this.
    and if I do this will it show up as one wireless network with no interference issues?
    There will be no interference issues between the AirPort Extreme and AirPort Express. However, if you live in an area with a number of other wireless networks around you, or you have cordless phones, there may well be some interference issues to tackle.
    I am planning on getting an express airport and using some of those power cable ethernet adapters to link the two routers up
    That should work assuming that both ethernet powerline adapters will be on the same master electrical circuit. I would suggest that you get a clear understanding of the store's return policy though...just in case.
    Message was edited by: Bob Timmons

  • Is it possible to extend an Airport Extreme Network with a normal router ?

    Hi everyone !
    I know this question as been asked a lot before, but not in this way, I always saw : How to connect an Airport Extreme/Express to a Normal (D-Link, Linksys, Ect.) Router. What I wan't to do is connect a normal router to my existing Airport Extreme to extend the range of it. I know you can extend the network with an Airport Express, the thing is, i wan't to try with the router I replaced by the Airport Extreme. It's an D-Link DIR-615. If someone know how to do this it will be very nice and helpfull for me! I know on Apple website it says that it's not possible but some people seems to get it to work!
    Thanks a lot !
    (Sorry for my bad english i'm french Canadien)

    You can extend the wireless range of the AirPort with a D-Link or the other way around ... BUT only if the connection between them is wired. This would be the basis of a roaming network. If you must have them interconnected by wireless, then it will NOT work.

  • Airport Extreme network with Ubuntu Linux (7.10), Windows (XP) and MacBook

    Hi all.
    My problem is that I cannot get Ubuntu to connect to Airport Extreme, see the hard disk(s) connected on it and print through it.
    Airport extreme is connected to my adsl modem and I have an Ubuntu PC, Windows PC and a MacBook connected to airport extreme. Windows PC and MacBook work as expected. From the Ubuntu machine I can only connect to the Internet but I can't see the hard disks and printers. I think this is because I provided the modem's IP address to connect to (I chose Static IP in Network Settings and provided the modem's IP as a gateway). When I provide airport extreme's IP address as a gateway I am disconnected from the Internet.
    To use airport extreme on Windows and macbook I used the installation CD, but it will not work on ubuntu. I installed airport-utils but it won't help, perhaps I am doing something wrong.
    Any suggestions?

    I suspect you have already found this out so this reply may simply be for my own memory recall in the future when I have forgotten it.
    To connect to the network drives you need to open the file browser. Then from the Go menu select Network. You will likely see the AirPort Extreme Base Station show up as a cryptic name. Double click on it and you should see the shares.
    For the printer I can't help as of yet since I haven't tried it yet.

  • Emac G4 problems with joining Airport Extreme network

    I have an Airport Extreme network with two Airport Express base stations. The Airport Extreme is connected to the internet via ethernet/cable modem. The imac and the base stations work fine and I have no problem with my internet access on the imac, but I can't get internet access via the emac. It appears that the emac is connected to the network, but I get an error message ("Can't find server") when I try to access the internet. What have I done wrong?
    imac G5 isight   Mac OS X (10.4.4)   Other computer: emac G4, operating system 10.3.9

    Is the eMac connected wirelessly to the network?
    It may be a DNS issue, see KB 106798, Mac OS: Troubleshooting "A connection failure has occurred", "The specified server could not be found" or Similar Messages.

  • Adding Wireless-N-ONLY Time Capsule to Dual-Band Airport Extreme Network?

    I have a dual-band airport extreme which I have configured to create both a wireless-a/b/g/n SSID on my network, as well as a second SSID which is Wireless-N-ONLY (meant to be used with my Time Capsule so that all backups to the Time Capsule via Time Machine are only ever done via Wireless-N).
    My Airport Extreme is already configured, and now I just have to configure my Time Capsule on my network...
    Can someone briefly run through the "assist me" steps in the Airport Utility that I'd want to follow to configure my Time Capsule so that it's available on my dual-band base station's wireless-N-ONLY network and so that it's not transmitting or receiving any other wireless protocol other than wireless-N?
    Thanks!

    Hi Bob,
    Thanks for your earlier feedback. I now have a dual band TC and the previous dual band EABS and I'm tearing my hair out trying to get these things to play nice! Maybe you can provide some assistance:
    1) The TC upstairs is connected to the comcast modem and is the main 'router' in my network. In addition, I'm using the "create wireless network" option on this router to set up both a 2.4 GHz and 5.0 GHz wireless environment.
    2) The AEBS downstairs on the opposite end of the house is connected by ethernet - whole house is wired so I'm feeding from the TC upstairs through a switch in the disti box down to an outlet where I have the AEBS. The cat-5 cable is connected to a LAN port on the back of the AEBS.
    3) I have the AEBS set up to extend the wireless network. When I do this it only gives me the ability to select one wireless network (I have the TC configured to call the 5 GHz network something different) - In essence doesn't appear to want to let me extend both bands of the wireless network.
    The problem seems to be that once I get all the configurations set I have no connectivity and if I try to open the configuration via Airport Utility, its just a spinning gear and will never open to show the settings. This happens to with both the TC and the AEBS. It's like it's in a loop or something.
    I immediately disconnect the AEBS from the network and suddenly all is well again.
    I know this seems like a rant, but this has been kicking my a** for two days!! I've just about had it with the constant 'hard reset' of the routers and starting over with configuration. If you have any specific things I should do, or settings that are key to set up both devices to extend my wireless network throughout the house I would be so thankful!!
    Thanks,
    Don

  • Can I use non-apple notebook to connect AirPort Extreme?

    I
    Can I use non-apple notebook to connect AirPort Extreme?

    He might be trying to do so to promote his products or may be there was some misunderstanding.
    Airport Extreme will work as a wireless router supporting upto 50 systems including Mac computers, PCs, iPad, iPhone, iPod touch, Apple TV and virtually all 802.11a/b/g/n Wi-Fi wireless devices — all at the same time.
    for reference http://store.apple.com/us/product/MD031LL/A/AirPort-Extreme

Maybe you are looking for