Adding audio and/or video without altering time line...

I currently have a completed i-movie project of which I wanted to add some "stuff" at the begining of the presentation and actually at one point in the middle. I want to "insert" this audio and a few slides without altering the rest of the project. Am I am to anchor points so that what ever I do around those points does not affect the timing of what is already there?
Thanks in advance all.
JCole

Hi
First your server does not require javascript only your browser, (standard in all modern browsers).
You also do not necessarily require the flash program, (your browser will require a plug-in for the audio video to play).
You will require some form of video/media encoding software to convert your files to the required format though, (do a search using your preferred search engine for video encoder), then use dreamweavers insert file option to insert your audio/video file into your html
PZ
www.pziecina.com

Similar Messages

  • I am using MTS files.  They load in PE fine. The problem is when I try to play them, I just get audio and no video.  I have installed the latest updates.  Is there a CODEX that I need.

    I have windows 8.1.  I have downloaded the mts files from my video camera onto my hard drive.  I have loaded a subset of these mts files into premier elements and they show up fine.  I can bring them to the time line without a problem.  The issue is that when I click on them, I only get the audio and no video.  Normally when you click a thumbnail, the picture shows in the large screen.  That screen remains blank.

    John - thanks for your response
    1. Graphics Adapter:  Nvidia GeForce GTX 650
    2. My driver before you response was 3/4/14   9.18.13.3523.  I went to Nvidia and downloaded and installed latest driver 7/2/14  9.18.13.4052
    3. Rebooted and checked APE and no change in the problem. Still doesn't show video when I double click an thumbnail or if I single click it does not show a video image in the large screen.
    4. Some things I have done to try to resolve the problem.
         a. Searched this forum for a similar problem.  I didn't see one.
         b. Did a web search to see if I could find a solution outside this forum
         c Went into "edit" and tried some changes in project preferences and setting to see if that would make a difference
         d. Tried to contact Adobe support to speak to a person but that seemed difficult and could never figure out how to do it.
    5. I have always loaded AVI clips into this program and this is the first time I have tried MTS files. When I opened the new project, the program notified that I had to change something??? to load an MTS file and asked me if I wanted the program to do this for me.  I said yes and here I am.   I seem so close to making it work.   Thanks

  • Hidding the floating toolbar that apears when sharing audio and/or video

    Hello everyone!
    I'd like to know if is it possible to remove(or hide) the floating toolbar that appears when sharing audio and/or video on firefox.
    I am attaching an image of what I want to hide.
    Thanks in advance,
    Ibrahim

    Sorry...
    The attachment didn't work the first time...

  • Recording Audio and Midi at the same time in Logic 7 Express Can it be done

    I am wondering if I can record audio and midi at the same time in Logic 7 Express. I am running my guitar thrugh a Roland GR 33, and a line out and using the GR 33 to trigger sounds in the Logic's synth section but cant seem to record all three tracks at once. If any one knows how let me know. Oh and I am running the GR Synth and Guitar into the Prosonus Fire Fox and have the GR 33 out midi to the Fire Box as well. So I guss the question is how do I sent up two audo tracks and one midi track to record in real time. Thanks Victor

    I am wondering if I can record audio and midi at the
    same time in Logic 7 Express. I am running my guitar
    thrugh a Roland GR 33, and a line out and using the
    GR 33 to trigger sounds in the Logic's synth section
    but cant seem to record all three tracks at once. If
    any one knows how let me know. Oh and I am running
    the GR Synth and Guitar into the Prosonus Fire Fox
    and have the GR 33 out midi to the Fire Box as well.
    So I guss the question is how do I sent up two audo
    tracks and one midi track to record in real time.
    Thanks Victor
    Try arming the audio tracks, select one of the tracks, then while holding down the shift key, select the midi track you want to record, arming the "r" on the midi track. Press "record".....
    HL

  • Downloaded a movie (mpeg-4) from youtube and I only have audio and no video.  it plays on another pc but not this one.  please help.

    Hi,
    I downloaded the latest free version of quicktime.  I am trying to play a movie (mpeg-4) that was downloaded from youtube.  It plays fine on my other pc, but I only get audio and no video when I open it on this pc. It shows up like static lines on a tv that has bad reception.  Can anyone offer some suggestions please?  I need to play it on thislaptop computer as I require it for a school presentation.  Thank you.

    It plays fine on my other pc, but I only get audio and no video when I open it on this pc. It shows up like static lines on a tv that has bad reception.
    Open your QuickTime control panel (either via the Control panels, or by going "Edit > Preferences > QuickTime Preferences" in the Quicktime Player). In the Advanced tab, uncheck Enable Direct3D video acceleration:
    ... and click OK. Quit and restart the QuickTime Player prior to checking to see if the settings change has had any effect.

  • Changed TV out to off but ipod still only plays audio and no video

    Just recently my ipod decided not to play video. All the videos in the video folders are gone and now appear in the music folder. Even the video podcasts no longer appear in the video podcast folder. I have changed the TV to out to off and still it continues to do the same thing. I am not sure what happened, I don't believe I changed any settings or anything. I would hate to reset the ipod and lose everything. Need help, thanks.
    Compaq Presario 1500   Windows XP   2 ghz 256 mb ram laptop

    It plays fine on my other pc, but I only get audio and no video when I open it on this pc. It shows up like static lines on a tv that has bad reception.
    Open your QuickTime control panel (either via the Control panels, or by going "Edit > Preferences > QuickTime Preferences" in the Quicktime Player). In the Advanced tab, uncheck Enable Direct3D video acceleration:
    ... and click OK. Quit and restart the QuickTime Player prior to checking to see if the settings change has had any effect.

  • I shot video on a Panasonic P2 and I'm trying to import the MXF files to Final Cut Pro but when I try to import, the only thing that imports is a blurry image of each clip. There's no audio and no video...how can I import MXF files into Final Cut Pro?

    I shot video on a Panasonic P2 and I'm trying to import the MXF files to Final Cut Pro but when I try to import, the only thing that imports is a blurry image of each clip. There's no audio and no video...how can I import MXF files into Final Cut Pro?

    at the end, you say "import preferences", which program are you describing?
    So im safer using footage that is remotely being pulled from iphoto...
    vs
    using footage that is imported into FCP from imovie?
    Is there anything i can do in fcp to make this footage more reliable or safer or more stable as i pull remotely from iphoto?
    All the footage, and all the libraries to all programs, or on a new pegasus 12tb raid 5 setup fyi.

  • I am using FC Express HD, and for some reason, when I export a Quicktime movie, the final movie will only play audio, and the video is black.  I only get the actual video if I export as self contained, or if I exportusing quicktime conversion. Why?

    I am using FC Express HD, and for some reason, when I export a Quicktime movie, the final movie will only play audio, and the video is black.  I only get the actual video if I export as self contained, or if I exportusing quicktime conversion. Why?

    I am using FC Express HD, and for some reason, when I export a Quicktime movie, the final movie will only play audio, and the video is black.  I only get the actual video if I export as self contained, or if I exportusing quicktime conversion. Why?

  • Audio (and some video) dropping out export

    I've created an project with short video/audio clips sampled to produce "music". It plays OK in FCPX, but when I export it (H.264, 720p, Apple Devices, 44.1) as an MP4, some of the audio (and some video) drops out. That is, it does not show up in the exported (aka "Shared") movie file.
    There are about 7-8 things (tracks) going on at once, maximum.
    Any ideas what to do to fix this?
    Thanks!

    Hi juicespeare1,
    Welcome to the Sony Community!
    Upon checking your inquiry, the best division to respond to your concern is our Sony Mobile department.
    You can reach them at this site: http://www.sonymobile.com/global-en/support/contact-us/contact-info/.
    If my post answers your question, please mark it as "Accept as Solution"

  • Recording audio and midi at the same time ??

    Is it possible to record audio and midi at the same time in logic?? It doesnt seem to work for me, im assuming there must be unchecked box somewhere that I need to check. thanks,
    Dan

    Daniel,
    You should be able to accomplish this by hitting record on the audio track, and then while holding the "Shift" key down, hitting record on the MIDI track (or visa versa).

  • Streaming audio and/or video crashes your router BEFW11s4 firmware problem

    Ok!!! Apparently some of us have had the problem where trying to stream audio and/or video can cause the Linsys BEFW11S4 to crash, where only a power down and re-up will retore communication. Changing the MTU size has been suggested ad-nausium. I hope this works for you all, because it worked for me.
    Apparently the latest firmware is the problem. I just installed an older firmware version and problem solved (1.50.14).
    ftp://ftp.linksys.com/pub/network/befw11s4_v4_v1.50.14_code.bin
    So, looks like maybe Linksys could hopefully issue another firmware update that fixes this (we hate having to use old firmware... trading off one bug fix for other multiple bugs that may rear their ugly head later on).
    list of bugfix history found here:
    http://www.linksys.com/servlet/Satellite?blobcol=urldata&blobheadername1=Content-Type&blobheadername2=Content-Disposition&blobheadervalue1=text%2Fplain&blobheadervalue2=inline%3B+filename%3Dbefw11s4_v4_v1.52.02_ver.txt&blobkey=id&blobtable=MungoBlobs&blobwhere=1130824460891&ssbinary=true

    Hi all -
    This looks like this will fix the issue I have with my router. I'm willing to try it, anyway.
    My question is pretty basic: What do I do after I download the file?
    Thanks, Kate

  • Merging one Audio and one Video into one file.

    Hi guys,
    I have one audio and one video file, related to same issue.
    I want to merge it using Java.
    Please help me to solve this out.
    Thanking you all in advance.
    Regards,
    Lovelesh.

    check out FMJ:
    http://fmj-sf.net/

  • Portable Wireless Server WG-C10 doesn't stream any audio and some video content after updating phone to Android Lollipop 5.x

    The Portable Wireless Server WG-C10 I purchased in 2014 doesn't stream any audio and some video content after updating phone to Android Lollipop 5.x.
    The WG-C10 firmware is the last version which is available and the PWS Manager software is the last version available in Google Play Store.
    There are no updates for the WG-C10 firmware nor PWS Manager software since 2013 or for Android 5.x (Lollipop) and I don't know if the WG-C10 firmware is the problem or if the PWS Manager software is the problem.
    BTW, I am still able to stream this content on my tablet which is on KitKat (4.4.x) so the files are not corrupted.  The only problem is with Lollipop.
    PWS Manager in the Google Play Store says it supports Android 4.0+ which is no longer true.
    The audio file formats which fail to stream are:  mp3 and wav
    The video file formats which fail to stream are:  mp4, avi and 3gp
    JPEG Images appear to work fine, but I haven't tried other formats.
    I purchased the WG-C10 to stream audio and video primarily to my phone and now that this no longer works, the WG-C10 is useless to me.
    Any ideas?

    Hi juicespeare1,
    Welcome to the Sony Community!
    Upon checking your inquiry, the best division to respond to your concern is our Sony Mobile department.
    You can reach them at this site: http://www.sonymobile.com/global-en/support/contact-us/contact-info/.
    If my post answers your question, please mark it as "Accept as Solution"

  • Is it possible to Replace audio in a video without re-importing and re-exporting ?

    Hi..
    i have exported a video of 2 hours length..  Then i just feel i need to replace the audio with another audio file which has small tweaks in it..  Can i replace the audio in the video i exported without having to reimport the video into fcpx and re-exporting ??
    can i do this ? is there a way to replace audio ? any external apps available ?
    Do let me know.. Thank you !
    Regards,
    Arun Kanth

    If you're set against reimporting/exporting: Quick Time Pro should accomplish what you're trying to do. It's a $29 license, but is much more useful than QTX and is a tool worth having if you don't already/
    http://re-sounding.com/2012/01/05/replacing-audio-track-qt/
    Russ

  • Adding Audio and Video Content to EPUB from InDesign CS5.5 | CS5.5 Design Premium Feature Tour | Adobe TV

    In this episode, Colin Fleming shows how simple it is to embed audio and video content in InDesign CS5.5 for export to EPUB.
    http://adobe.ly/xT0jKh

    I have placed audio and video into InDesign. I did it just exactly the way this video told me. Everything works well in the preview panel. However, when I exported it to EPUB, the file of the EPUB is so small (I guess, it should have been larger because I had added video and audio file into it). Plus, When I open it in EPUB reader (ibook) and Adobe Digital Edition, It shows nothing.
    What I want to do is to create an EPUB which contains image, and sound. I want to make the image as a button which plays sound when I click it. I did it by setting he button to play when clicked, but again, it is not showing at all when published to EPUB.
    I hope that there will be a good solution to this matter.
    Thank You.

Maybe you are looking for

  • Cannot send email on iPad

    I cannot send email from my hotmail account on my iPad.  An error message indicates that the user naame or password for "Homail" is incorrect.  I have re-check the passwords in settings and they match my iPhone (on which I can send mail from the same

  • Encoder 2014 crashing with OpenGL error - please advise

    I did some research and split my 40-minute sequence (AVCHD 1080p 30fps) into chunks... did fine until the last one which was only 7:56 long - another successful export - Vimeo 1080p with MQR selected as suggested in the forum was longer. Up until thi

  • Use EVALUATE function in obiee

    Hi ALL i hv a database query like this; select deptno, rtrim (xmlagg (xmlelement (e, ename || ',')).extract ('//text()'), ',') enamesfrom emp group by deptno; now, i want to use this using Evaluate function in obiee column formula. thn how to do it.

  • Can't find my old iPhoto files....?

    I recently bought a new Mac laptop and transfered some files to it via data migration. Now I just want to locate some old photos on my backup drive. The dirve was connected to my old Mac, then I chose to transfer the backup drive to my new Mac laptop

  • Group key

    Hi What is use of group key in vendor/customer master data? with example Regards Suresh