Adding Barcode Type 39 (3 of 9) in Reader

Hi,
Does reader support barcode type 39 (3 of 9)? Is it just a font that's written into reader or an image that's inserted in the pdf? We need the barcode to be 300 dpi and bi-tonal.
Any recommendations on a recommended barcode creator that works best with Adobe Reader?

thank you for the quick reply
At time of pdf creation can we add a barcode - is it just a font or an image that's entered it?
I'm not sure if PDF supports barcodes when a pdf is created

Similar Messages

Regarding Barcode Type....

Hi friends...
     How can I get the information about the attributes of different barcode types   used in Smartforms?
Kindly Suggest me the solution for this query???
Points will be rewarded to the useful answer...
Thanx,
Rahul.

Hi Rahul,
You can use barcodes types already created or you can create new one if
these types does not satisfy you requirement.
If you create a new system bar code for the "new bar code technology" in transaction SE73, you must specify the following parameters:
Bar code name (used in Smart Styles)
Short text for system bar code (documentation)
Bar code symbology:
    Code39
    Code128
    Interleaved 2of5
    PDF417
    Code93
This selection determines the technical bar code type that is used to format the bar code data (also called bar code symbology). The symbology also determines which characters are allowed in the bar code data.
Bar code alignment:
Normal (that is, the scan direction is "from left to right")
Rotated (the scan direction is rotated by 90 degrees "from top to bottom")
Inverted (the scan direction is rotated by 180 degrees "from right to left")
Bottom-up (the scan direction is rotated by 270 degrees "from bottom to top")
Code39 ******************
Code39 is an alphanumeric code that can represent the following characters in the bar code data:
Numbers:        1234567890
Capital letters: ABCDEFGHIJKLMNOPQRSTUVWXYZ
Special characters: - . $ / + %
Blank characters (space characters)
The start and stop character for the Code39 bar code is usually represented by an asterix (*) in the text view of the bar code data (also called "human-readable text" or "interpretation line").
Parameters for Code39:
Narrow module width
Value range: 1 to 10
This is the width for the narrowest module of a bar code, measured in pixels. It controls the width of the bar code. Value 1 generates the "narrowest", value 10 the widest bars or spaces.
Linear height
Value range: 1 to 9999
Controls the height of the bars of the bar code, measured in pixels. A value of 600 is equal to a height of one inch.
Mod-43 check digit
Value range: X equals YES, blank character equals No
With this indicator, you can determine whether a Modulo-43 check digit is to be generated.
Bar ratio
Value range: 20 to 30
This value controls the ratio between wide and narrow bars. This value controls the ratio between wide and narrow bars.Value 20 means a ratio of 2.0:1, value 30 means a ratio of 3.0 to 1 (that is, 3:1).
Parameters for Interleaved 2of5:
Narrow module width
Value range: 1 to 10
This is the width for the narrowest module of a bar code, measured in pixels. It controls the width of the bar code. Value 1 generates the "narrowest", value 10 the widest bars or spaces.
Linear height
Value range: 1 to 9999
Controls the height of the bars of the bar code, measured in pixels. A value of 600 is equal to a height of one inch.
Mod-10 check digit
Value range: X equals YES, blank character equals No
With this indicator, you can determine whether a Modulo-10 check digit is to be generated.
Bar ratio
Value range: 20 to 30
This value controls the ratio between wide and narrow bars. This value controls the ratio between wide and narrow bars.Value 20 means a ratio of 2.0:1, value 30 means a ratio of 3.0 to 1 (that is, 3:1).
Code 128 *****************
Code128 is an alphanumeric code that can encode three different character sets. Each of the three character sets can represent 106 different characters. Within a bar code, you can alternate between the character sets.
The three Code128 character sets are named as follows:
Subset A) (contains, for example, digits, capital letters and control characters)
Subset B) (contains, for example, digits, uppercase and lowercase letters)
Subset C) (digit pairs from 00 to 99)
Parameters for Code128:
Narrow module width
Value range: 1 to 10
This is the width for the narrowest module of a bar code, measured in pixels. It controls the width of the bar code. Value 1 generates the "narrowest", value 10 the widest bars or spaces.
Linear height
Value range: 1 to 9999
Controls the height of the bars of the bar code, measured in pixels. A value of 600 is equal to a height of one inch.
Code128 mode
Value range: N (default value), A, U
In default mode N (None), the Code128 bar code works in subset B. If you want to switch to another subset, you must trigger the change explicitly with a control command ("invocation code") in the bar code data.
In mode A (automatic), the software analyzes the transferred bar code data and recognizes automatically which subset is the most adequate for the bar code data. Subsets are swapped automatically in the bar code data. A sequence of four or more digits initiates an automatic change in subset C.
In mode U (UCC case mode), you must transfer 19 digits in the bar code data. Subset C is set automatically and an FNC1 character is added as prefix.
Note: If fewer than 19 digits are transferred, the bar code is filled with zeros to the left until it contains 19 digits.
UCC check digit
Value range: X equals YES, blank character equals No
Note: This parameter has no effect becaues Code128 always generates a check digit, even in UCC mode. The parameter will be removed in the future.
Code93 is an alphanumeric code that can represent the following characters directly in the bar code data:
Numbers:        1234567890
Capital letters: ABCDEFGHIJKLMNOPQRSTUVWXYZ
Special characters: - . $ / + %
Blank characters (space characters)
The start and stop characters in the Code93 bar code are represented as # sign in the text view of the bar code data (also called "human-readable text" or "interpretation line").
Parameters for Code93:
Narrow module width
Value range: 1 to 10
This is the width for the narrowest module of a bar code, measured in pixels. It controls the width of the bar code. Value 1 generates the "narrowest", value 10 the widest bars or spaces.
Linear height
Value range: 1 to 9999
Controls the height of the bars of the bar code, measured in pixels. A value of 600 is equal to a height of one inch.
Check digit
Value range: X equals YES, blank character equals No
With Code93 bar codes, a pair of check digits is always used and is always generated in the bar code. This parameter has no effect.
PDF417 is a two-dimensional bar code to represent datasets that are larger as the usual datasets in one-dimensional bar codes (for example, more than 1,000 characters). The entire 7-Bit ASCII character set is generally processed (binary values 1 - 127, the value 0 is not permitted).
A PDF417 bar code consists of 3 to 90 consecutive rows. Every row consists of a start/stop indicator and "code words". A code word consists of 4 bars and 4 spaces. The minimum number of code words per row is three.
Parameters for PDF417:
Narrow module width
Value range: 1 to 10
This is the width for the narrowest module of a bar code, measured in pixels. Value 1 generates the "narrowest", value 10 the widest bars or spaces.
Linear height
Value range: 1 to 9999
This parameter currently has no effect on PDF417. The height of a PDF417 symbol is controlled by parameter "Single Row Height" and the number of columns and rows, in conjunction with the length of text data to be encoded.
Single row height
Value range: 1 to 32000
This value, multiplied by the narrow module width, returns the height of the individual rows of a PDF417 symbol, measured in pixels. Caution: Do NOT use the value 1 for this parameter
Security level
Value range: 0, 1-8
This parameter controls the number of code words that are generated for error recognition and error correction. The default value 0, however, only permits error recognition but no automatic correction. If you increase the security level, the level of error correction increases with it (this increases the size of the bar code).
Number of columns
Here, you can define the number of the code word columns which you can use to check the width of the bar code.
Value range:
0 (default value) : A row/column ratio of 1:2 is used.
Permitted values: 1 to 30
Number of rows
Here, you can define the number of rows which can be used to check the height of the bar code.
Value range:
0 (default value) : A row/column ratio of 1:2 is used.
Permitted values: 3 to 90
For example: If you leave both parameters set to the default value 0, the system would convert 72 code words in a bar code symbol with 6 columns and 12 rows.
Truncation
Value range: X equals YES, blank character equals No
This indicator determines if the right row indicator and the stop pattern are to be truncated (this saves space).
The following character combinations in the transferred bar code data have the special function:
\&    - This represents the end of a line (Carriage Return + Newline)
    - This represents a backslash (5C hexadecimal)
\0xYY - This represents a single byte with the value YY (hexadecimal)
        For example: \0x1E is output as a single byte with the value 1E (hex)
        or 30 (decimal).
The souce for this information is OSS Note 645128.
Still if u face any problem feel free to ask.
Regards,
Vivek
-Reward if useful

After adding MIME type in sharepoint server, file click opens a popup for file to open as readonly or edit, How to avoid this popup

After adding MIME type in sharepoint server,
File click opens a popup for file to open as readonly or edit, How to avoid this popup
Popup Details:
You are about to open --> File Details
How would you like to open --> ReadOnly, Edit
OS: Window 7
Jagadish

this is likely caused by the library requiring check-out/check-in. For a file to be editable, the file needs to be checked out.
Scott Brickey
MCTS, MCPD, MCITP
www.sbrickey.com
Strategic Data Systems - for all your SharePoint needs

Adding Barcode Font, Other PDF reports complete in warning

Hello guru's,
I am needing assistance with a barcode font problem that I am having. We have followed instructions on Tim's blog about adding barcode fonts but the concurrent program completes in a 'warning' status.
Also, other reports that were developed in Word that are getting output to PDF format are also completing with a warning(even though they have no Barcode Font on them). When I try to view the output through EBS it will not let me view it(though it will let us print the report to a post-script printer with a pdfTOps printer driver).
Interestingly enough, when we remove the Font Mapping(which was done at a site level) all the reports without barcodes complete successfully and can be viewed through EBS(and the report with the barcode font completes in a warning). So my question is, why does this happen and how do I fix the issue? It appears as though the Font Map which we created is not allowing the predefined fonts in XML publisher to work properly?
Thanks in advance!!!

Which version of XML Publisher are you in? You might have to install a patch for bar code to show up on PDF outputs.
Please take a look at metalink note: 373377.1 (in the bottom of this document, please see the patch info along with error info).

Enterprise Content Management - Use of barcode type Code 39

Can anyone provide some insight on what barcoding types, other than UPC-A is compatible with SAP enterprise content management solutions? I have a potential client who likes the flexibility of Code 39.
Can it be used?
I look forward to your reply.

Hello Alton,
Here is the link for barcode type which are supported by SAP.
http://help.sap.com/saphelp_47x200/helpdata/en/d9/4a94e251ea11d189570000e829fbbd/frameset.htm
Hope this helps.
Regards
Arif Mansuri

New barcode type

I want to print Barcode type Code 128 Width 4cm and Height 1cm. I checked SE73. I don't find there. I tried to create one on my own and it is not working.
Any suggestions to make it work.
Thank you,
AP

hi,
as for reference i did the same and it is working fine for me...
pls check that smartstyle character format is activated and u assign this characterformat to the variable to print as barcode.
if it works with standard barcode then try to create one for zbarcode for reference.
se73--> system barcodes --> create..
Regards
CNU

Printing different barcode types..!

Hi Guys,
I have a requirement to print barcode of materials, the barcode type varies depends on the length of material No.
How this can be acheived in Adobe form ?
I am looking to control the visibility of the barcode through some conditions.
Also how I can loop through a internal table to print the barcode, which should each one in a separate page.
Thanks
Sam

It is a javascript-statement. IF you aren't familiar with javascript it is hard to develop a adobe-form at all.
My first case would be to make yourself familiar with the concept of Adobe-forms. You can work thorugh the getting started content provided by SAP and Adboe. There you will get a lot of basic experience on that tool itself and formclac/javascript.
Anyway, here is the JAvascript-example for the case you need to complete the solution:
switch(this.yourfield_barcodetype.value)
case "A":
execute code block 1
case "B":
execute code block 2
default:
code to be executed if n is different from case 1 and 2

Collect signatures workflow - Signatures can't be added or removed because this document was opened read-only

Hi, I have configured a "Collect Signatures" workflow for test Word document(.docx), then uploaded it to sample SP 2010 doc library (content type "Document"). This Word document has 2 empty Signature Lines in it.
After that i'm starting the Collect Signatures workflow on it , which is assigned to me and other user from my Active Directory.
Workflow is started and after that i'm receiving mail about assigned task which also contains link to document.
When i click on link it opens IE which contains SP library file path, after a while doc is opened in Word client in Read-only mode. When i want to sign the document info window pops up : "Signatures can't be added or removed because this document was opened
read-only" and i'm not able to compete task/sign doc from Word.
It is possible to sign the document when i go to SP library and opens this file directly from there (file drop-down menu-> open in MS Word).
I saw that this behaviour is similar to this article:
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/31ba43ec-b04e-428d-9a66-0cc571934197/collect-signatures-workflow-using-firefox-not-showing-workflow-task-this-document-requires-your?forum=sharepointgeneralprevious
but i'm using IE so it shouldn't be Active X issue.
I have also checked this MS Fix:
http://support.microsoft.com/kb/2661910
but changing CA settings to Permissive didn't help
Any ideas ?

Hi bezcisnien,
I could not reproduce this issue.
When you open this file directly by clicking the document Name link from SharePoint library, is there a
yellow message bar in Word document?
Did this happen to all users on all PCs?
Have you checked if it is a client side issue, test with different IE 8/9/10 versions for this issue (and IE compatibility mode, add-ons, trusted site zone etc)?
Thanks,
Daniel Yang
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Daniel Yang
TechNet Community Support

IDOC type abc contains error (Unable to read segments)

Hi All
While importing IDOC in IR i am getting error "IDOC type abc contains error (Unable to read segments)".
We have added one extra field into our existing customised IDOC into R3 and successfully releases. Previous IDOC having version 640 and modified IDOC having version 700.
In IDX2 i have successfully imported IDOC metadata and one extra added field also i can see there. But while importing into IR its showing me error "IDOC type abc contains error (Unable to read segments)".
I have tried to import different IDOC using same user and it was successfully imported means there is no authorization error.
Please suggest me where could be the problem?
Regards
Dheeraj Kumar

Do The following:
1) Delete the IDX2 entry and try to reimport once again....and in the IR also do the same.
2) Have a look into this SAP Note- 742093
3) Check the IDX1 entry , RFC destination entry... may be not pointing correctly.
4) If any field which is mandatory in the idoc must not be disabled...take care about it.

I have used Sony for the past 5 or 6 years. They recently stopped selling books and migrated their customers to Kobo. In uploading the Kobo site it looks like I added a new Adobe ID. Then my reader and computers were out of sync. When I try to downlo

I have used Sony for the past 5 or 6 years. They recently stopped selling books and migrated their customers to Kobo. In uploading the Kobo site it looks like I added a new Adobe ID. Then my reader and computers were out of sync. When I try to download books I get that they were already downloaded by another user, but also that they are in my library. However, I can't find them, and if I do download, it gives me an error message that the book is DRM protected. How do I get to the point where I can download books again?

Please authorize ADE 3 with same credentials that you used with older version of ADE

How do I add text boxes that people can edit font type, size, and color in Adobe Reader

How do I add text boxes that people can edit font type, size, and color in Adobe Reader? I am using Acrobat Pro XI.

It is possible. Add your text fields and in their Properties set them to have Rich Text Contents (under Options). This will allow the users to specify all kinds of formatting settings for those fields (by pressing Ctrl+E and using the Properties bar).

Adding Barcode to Adobe Form using Adobe LifeCycle Designer

I am hoping someone can help me. I have created a PDF form and have added 2 3-of-9 barcodes to the form using Adobe LifeCycle Designer version 8.0. I see the barcodes when I prin tthe form from Adobe but when I run my web page to print out the form using pdf, only the default value shows on the printed form, no tthe barcode as expected? Do I need some other software?
Thanks in advance
D

Hi Vasu,
Yes you can add fonts on ADS.
Adobe document services require access to fonts that are installed with the Font Manager Module. This module contains a number of Adobe bundled fonts installed in
"/usr/sap/<SAPSID>/JC<xx>/j2ee/os_libs/adssap/FontManagerService/fonts/adobe".
You can also add fonts obtained from other vendors. The types of fonts you can add are OpenType® (.otf), TrueType® (.ttf), and PostScript® Type 1 (.pfb/.pfm).
Procedure
To add fonts:
1. Create a subdirectory called fonts below the
"/usr/sap/<SAPSID>/SYS/global/AdobeDocumentServices/ FontManagerService" directory.
Enter JC<xx> if your system is a SAP Web AS J2EE system.
Enter DVEBMGS<xx> if your system is a SAP Web AS ABAP + J2EE system (J2EE Add-In).
2. Create a subdirectory called customer below the fonts/ directory created in the previous step.
3. Copy your fonts into the "/usrsap/<SAPSID>/SYS/global/AdobeDocumentServices/ FontManagerService/fonts/customer" directory.
4. Restart the Document Services Font Manager for the changes to take effect.
5. Also restart the application com.adobe/AdobeDocumentServices for the changes to take effect.

RECN (Process Contract) Error while adding condition type

Hi All
I am processing the contract (RECN). While adding a new condition type, it gives me thr error
Parameter KWH (area unit) for calculation formula Y3 has errors
Moreover when i defined this calculation formula (Y3), units KWH are not coming in area unit field (F4-possible entries).
Pls help me with that.
Thnx in advance
Deepak

Hi,
i am assuming you have added customised formula to condition type while creation of conditon. for the formula there is no link to Badi.
if the above is right, you need not to add any formula and parameter while creation of conditon,first remove the formula form the conditon and assign standard one.
then select the formula after inserting the condition. error about the formula may be no value is being supplied from the formula.
thanks
Jilani

Error while adding content type fields in the EditForm.aspx for an customlist item.

This is office 365. I have content type which is attached to custom list.
Added new site column "CustomerAction" which was added to Content type, now when I added this field in the EDITForm.aspx using the SharePoint designer, this form is called when the custom list item is being edited.
But when I added this extra field to EDITFORM.aspx it is giving error,. the standard correlationid error.
Can anyone suggest, what could be problem !
Thanks
Labhesh
Labhesh Shrimali

Hi Labhesh,
When we add the site column to the content type, there is an option to update the all
content types which inheriting from this type.
If we set this to Yes, then the site column will be added to the list where the content type or its child content type has been used and this column will be added to the EDITFORM.aspx too.
So we don’t need to re-add this site column to EDITFORM.aspx.
Thanks,
Victoria
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Victoria Xia
TechNet Community Support

Adding Barcode field in Acrobat X

When I try to add a barcode field in Acrobat X I get the following message
A Barcode Field encodes data that end-users type into a fillable PDF form. Use of this type of field for paper forms processing requires Adobe's Barcoded Paper Forms Solution (separate license required).
Where do you go to purchase this liscense? I can't seem to find it on the webpage.

It is required if you want the bar code field to work with Adobe Reader (Win/Mac). If all of your users will have Acrobat, it's not needed. The license can be purchased along with LiveCycle Reader Extensions (http://www.adobe.com/sea/products/server/readerextensions/), which is also available from datalogics.com (I couldn't get to their web site today, but look here: http://www.linkedin.com/company/datalogics/adobe-pdf-java-toolkit-1006340/product?trk=biz_ product)
If you go through Adobe, you'll have to talk to a sales rep about pricing.

Adding Barcode Type 39 (3 of 9) in Reader

Similar Messages

Maybe you are looking for