Adding custom fields in BSEG

Hi All,
We have an requirement where I need to add custome field to BSEG(with APPEND).
I wanted to know the steps to add the custom fields in BSEG and also the impact of the same. Are there any concerns as this is a cluster table?
Please let me know.
Thanks for your help in advance.
Best regards,
Yogita
PS : I couldnt find any details in the forum regarding this
Please be careful when creating a subject line. I changed it to what I think you mean.
Edited by: Rob Burbank on Oct 15, 2010 10:27 AM

Guess you didn't look very hard. See Add New fields in BSEG
Rob

Similar Messages

Adding Custom Fields to BSEG and BKPF Tables

Hi All,
My customer would like to add around 5 fields to BKPF table and 6-7 fields to BSEG table. Can you all suggest me whether it would be a good idea to add any custom field to these tables ? I would like to mention that standard fields available in these tables will not be used for the requirements of the customer and he is insisting on adding custom fields. I need your expert advice on this matter.
Regards,
Rohit

Hi Friend,
Please do not add any custom fields in those tables.
These two tables are pillar of accounting entries in SAP, if you want to push them then it is OK, otherwise find some other way.
Regards
Krishnendu

FBV1 - missing standard field and adding customer field

Hi there,
I am in a process of developing a batch input program based on RFBIBL00 to upload preliminary posted documents.
The problem is some fields are not there. A standard field BKPF-REINDAT is missing. Also there is a requirement to add a customer field from BSEG (on vendor screen).
I have searched SAP notes for possible solutions, most of them include modifying screens by hand and adding the required fields there (i.e. Note 1347046 - VATDATE: Field missing in batch input parking (FBV1)).
This is quite a serious modification, requiring access key to change SAP objects. Before I decide to change SAP standard objects I kindly ask whether anyone tried that ? REINDAT might work, as it's a standard field, but I'm note sure about customer fields.
Has anyone tried modifying FBV1 or any of FI posting screens by hand and can provide some input on this ?
Thanks,
Bart

Dear Bart ,
as You know the field in question is intended only for US-Federal customers.
The field is not availble into the standard system using the parking transaction; therefore You should run se51 at Your own responsability and do the changes.
If You need to be completely sure about the impact on the customer System, please kindly open a message on the marketplace.
I hope this can help.
Mauri

Adding custom fields to Embedded Search

Hi All,
I have read the post [here|How to add custom fields to Embedded Search; about adding custom fields to Embedded Search. I am looking to add Employee Subgroup for use in Talent Management (specifically the STVN SuccessionPlanning component) and wanted to know if anyone can expand on the instructions in the link to add this field.
It appears to be part of the HRTMC_PERSON search object connector already and while I've done some IMG configuration the field is showing in SuccessionPlanning, but not displaying any data.
Additionally, I'd be interested in any tips to add information that is not from PA0002 should it be required in the future.
Many thanks,
Luke

Hi Luke,
I am assuming here that your search request fields are based on HRTCM_CENTRALPERSON search template. To enable your search to work on employee subgroup please do the following
1) Check if the HRTMC_PERSON Template extracts the data from Infotype 0001 via SPRO node 'Define Search Models and Change Pointer' Extraction Class is 'CL_HRTMC_SEARCH_READ_PA_INFTY'.
2) Via ESH_COCKPIT, goto Template Modeler and select your custom Software Component and press Edit. Goto roadmap step 5 - Define Requests - where all search request fields are defined. Its using these fields Talent search works.
3) Select the search request e.g. 'SAP_TALENT_NAKISA', it would then show list searchable attributes in below table. Using 'Add' button select path for PERSK so that it can searched.
It would look like this once selected
OBJID(REL_CP_P)->HRTMC_REL_CP_P_209.REL_CP_P(REL_CP)->HRTMC_PERSON.OBJID->HRTMC_PERSON.ORG_ASSIGNMENT
4) In step SPRO 'Define Search Requests and Search Field Names' , define Employee subgroup field with AliasSearchField = PERSK since thats what is defined in roadmap step 5.
Hope it helps!
Regards,
Ricky Shah

Adding custom fields through SE51

Hi All!
This is with regards to adding custom fields through Se51 to standard screens.I had added custom field KNVV-ZZKVGR6 to the screen.
After drawing the text and I/O buttons.When I activate I am getting an syntax error saying Field KNVV-ZZKVGR6 is defined differently in screen (ABAP/4 field,Dictionary field).
What does this mean.
Also if i activate with a SAP standard field instead of the custom it is getting activated.
But for both the ways I could not able to see the output on the actual transaction.Also the new drawings which i am drawing are in brown color(different form the existing one)
Please advise.
regards
Praneeth

hi Praneeth,
what is the program name,screen number you are trying to modify..,and after appending the field ZZKVGR6 to KNVV , now go to table and choose menu Utilities->Data base Utility-> now click on Activate and Adjust the Data base, then try to add the field.
and are you adding the field from Dictionary (i.e you have option Get From Dictionary in that give KNVV table name it will list the fields, choose zzkvgr6 from it, and place it in your screen.)
the exit which you are adding should be appropriate one
or else you won't get the desired results. what is the exit..
Regards
vijay

While adding custom field in urgent change-Create new field button in AET is not coming

Dear All,
we have requirement to add some custom fields in urgent change document. while adding custom fields using AET, create new field button is not coming.
Thanks in advance. points will be awarded.
Rahul

Hi Jignesh,
Thanks for your valueble inputs, it really helped me to understand the process.
I checked in Web UI configuration for urgent change document as you mentioned but still that button is not coming.
In transaction BSP_WD_CMPWB, i have created enh. set: Z_ENHANCEMENT_SET.
Can you tell what to selelect in application and page popup which comes after selecting Enhance component button. Actually i tried but i am not able to add new record in conf.
Thanks in advance.

CRM 7.0 / IS-U: adding custom fields to Business agreement for replication

Hello Experts!
We're working on replication of custom fields from IS-U to CRM 7.0.
Can you help me with clarification of my understanding of these questions..?
1) CRM/IS-U mapping tables for buag_main:
Business Agreement(BUAG_MAIN) is a BO in CRM that corresponds to CRM table CRMM_BUAG and to Contract account in IS-U table FKKVKP.
Table FKKVKP were enhanced with some z-fields,
so we are going to enhance corresponding CRM table CRMM_BUAG (or CRMM_BUAG_H) with that new fields..
But we see that these CRM and IS-U tables have far not the same field structures..
So, the question: Which crm and is-u tables i should look, enhance and replicate for Business agreement?
2) Access to Business agreement with possibility to add custom field:
I couldn't find in Web UI where i can directly edit profile of Business Agreement..
I've found just access to assignment block "Business agreement" on Account's profile overview page..(Role ServicePRO; Account details).
There I used AET to add custom field..but I faced with problem when the 1st popup appeared: there was no enhanced object "Business Agreement"..
Also in role "Utilities IC Agent" i've found "business agreement" profile but there I don't see buttons for adding custom fields..
So, the question is: Where I can access Business agreement profile to enhance it with custom fields for replication with IS-U?
3) CRM/IS-U data exchange functions:
I tend to use tcode CRMC_BUT_CALL_FU:
for CRM inbound event of BUAG object - FM CRM_BUAG_MWX_PROCESS_EXT_STRUC..(as template).
Question: Am I right that it fits my requirement to replicate custom fields from IS-U to CRM?
Please tell me if you need more information..
Looking forward to your answers.
Thank you a lot in advance!
Kind regards,
Evgenia

Hi Gobi,
Thank you for advice. But:
I've created fields not by using AET - I used documentation that Nicolas suggested me above.
I've enhanced tables and structures that were mentioned there with my z-fields for both sides (CRM and ERP).
Also I looked CRMC_BUT_CALL_FU for CRM Inbound BUAG_MAIN - corresponding standard FMs are marked for call.
Any ideas?
Thanks in advance.
BR,
Evgenia

Adding Custom fields to SRM Item Data tab & Account Assignment Tab

Hi Everyone,
We have got a small requirement to add 2 custom fields in SRM Shopping cart.
Need to add a input field, which should act just like Requisitioner in ECC. ( F4 help ).This will allow to create shopping cart on behalf of some one.
Need to add input field, which resembles Goods Recipient in ECC ( Free text)
After adding custom fields, how do i ensure that, it's mapped to right field in ECC.I spent much browsing SRM forum, but couldn't gather much information. I understood that, this involves configuration in SPRO.
Any information or help in any kind would be really helpful.
Thanks in advance.
Vishnu

Hi Vishnu,
Take look at this link.
Add custom field to SC and POWL
Thanks
Senthil

Adding custom fields to Article Master (MM41/MM42)

Hi ,
I have a requirement of adding custom fields to Basic data of Article creation in MM41 . I appended the fields to
MARA table using Append structure . I followed the steps given in note 44410 . But i am unable to find an EXIT/BADI
/ENHANCEMENT to populate the values of custom fields which get triggered during MM41/MM42 .
But the Exit EXIT_SAPLMGMU_001 gets triggered only during MM01/MM02 . Kindly guide me to solve this .
Thanks and Regards,
S.Sivakumar

Hi,
Business Requirement:
As per the client Business critical requirements, additional fields are
required in the Article Master. This is because the existing fields in
the Article master are not adequate to capture the data.
We have referred the SAP Note 925424 (Table MAW1) and 44410 (MARA) for
this.
Based on the above note 44410, we have added fields in MARA table,
since Manufacturing
activities are envisaged in future instead of proceeding with 925424.
Whether, MAW1 (925424) also to be considered?
Since this is very critical requirement from client, we cannot avoid
and do not have any
alternate solution.
These fields will be used in reports and pricing in sales &
distribution.
Apart from this, are there any other SAP notes to be referred?
Is there any restrictions there in length for fields to be used in MARA table .
By referring note 44410 , i added 20 fields in MARA table, in which some 4 fields are more than 40 characters .
All custom fields are updated in MM41 and MM42 .
Shall i proceed by this approach .Kindly guide me on this .
Thanks and Regards,
S.Sivakumar

Adding Custom Fields to FAGLFLEXP Table

Hello,
We have a requirement to update WBS Element for Planning related Data. So have added custom field(WBS Element) in structure CI_FAGLFLEX04.
The field is visible when I open FAGLFLEXP table, but when I post data The custom field (WBS Element) is not being updated. Could you please let me know the process to update this field?
Thank you in advance.

Hi.
The procedure isn't so simple. There are several posts on the subject SCN. I suggest research before you start developing.
Start here:
https://help.sap.com/saphelp_nw04s/helpdata/en/cf/21eb61446011d189700000e8322d00/content.htm
However, the most important is: a) Is it really necessary to change the standard? b) There could be a Z table containing the new information and referencing FAGLFLEXP? c) What is the transaction that will keep the data? It has Exit´s for what you need?
As Vadamalai said below,
Actually your approach may be wrong, first as an ABAPer should ask to functional team, which transaction and where to insert the fields, it could be header or item level(I am saying example)
Based on tcode, you need to enhance the table level as well as the screen exit/BADI we need to pass screen to internal programming structure. the structure type will be table type of FAGLFLEXP.
Regards.
Douglas

Adding custom fields to DB table

Hi,
I added custom fields in std DB table using CI_* , activated table using SE14. Now I want to remove the added custom fields , I deleted the CI_* using SE11. It still appears in DB table, I mean I dont expect to disappear from DB table, when I double click it still takes to structure screen. I deleted include from SE80 also selecting Package, activated and adjusted DB table from SE14 after deletion, but it still appears and when I check the attributes it shows the same package , how to reset the CI_* , bottom line ,I want to make DB table normal as before, because of that I am getting dumps when I execute std DB table related T codes.
It should be done in easy way but not able to get breakthrough.
Please let me know your suggestions.
Thanks

Hi Sai,
Try to assign the CI_* structure to $temp,i.e as local object and then activate it first.
After that, try deleting the local object and adjust the table using SE14.
If still it does not work, ask your BASIS consultant to do an "Alter table".
May be that works!
Thanks & Regards,
Anshumita.

Adding custom fields to table view assignment block

Hi All,
I want to add two news fields to 'Service Contract Item Level' in 'Object List' assignment block. How can i add these two custom fields to table view assignment block using AET. I have tried to add new fields using AET but there is no business object supports to my requirement.
Thanks & Regards
Nitish

Hi Nitish,
As naveen sadid use Cutomer_i object . I guess it will be more appropriate.
And following link will be helpful for AET creation.
CRM 7.0 How to --4 Adding Custom Fields With The New Application Enhancement Tool (AET)
Regards
Loks

Adding custom fields in IW41/42/43.

Hi All,
I have a requirement of adding custom fields in the order confiramtion screen i.e IW41/42/43.
i found this user exit CMFU0001: Determine customer-specific screen layout.
but i am not able to figure out a way to use it.
has anyone done such an developemnt .
Kindly help
Regards,
Johnson George.

Hi,
Try this:
Userexit:CONF0001
Go to tcode:CMOD
Give a name for project,press Create.
Click on the enhancement assignments button and add the selected enhancement there and enter and save it.
Click on 'Components' button.Double click on EXIT_SAPLCORU_001, double click on 'INCUDE ZXCOCU01'. Write code here.

Adding Custom Fields to XD99

Hey All,
I am trying to figure out a way to Mass maintain Custom fields(Z fields) in KNA1 using transaction XD99. I did find some material which discussed about adding custom fields to MM17 transaction, but couldnt get any usefull information on XD99.
Any inputs or suggestions are highly appreciated.

Hi,
Please check the following oss note
Note 414020 - MASS: Customer fields are not mass-maintainable
Thanks
Naren

Adding Custom fields to standard SAP-EBP application

Hi,
A functionality requires some custom fields to be added to the standard SAP-SRM EBP ( Manage business partners) application.
If I copy the whole BBP_VENDOR_CREATE program into a Z-program, and the BBPMAININT internet service to a Z-application, then would it be feasible??
Which is the best way to add custom fields in a SAP standard EBP application--in the 'Manage business partners' section.
Regards,
Goutam

Hi
I don't think it's easily possible to add custom fields to the existing transaction - BBPMAININT.
For adding customer fields you can refer the SAP OSS not - 672960, but I don't think it will be of much help here.
Since SAP has not upgraded this transaction - BBPMAININT for a quite long time, you need to do all the logic and validation from your end.
Better to go for you own Z (custom program) and make your logic accordingly.
Regards
- Atul

Adding custom fields in BSEG

Similar Messages

Maybe you are looking for