Adding custom fields to Article Master (MM41/MM42)

Hi ,
I have a requirement of adding custom fields to Basic data of Article creation in MM41 . I appended the fields to
MARA table using Append structure . I followed the steps given in note 44410 . But i am unable to find an EXIT/BADI
/ENHANCEMENT to populate the values of custom fields which get triggered during MM41/MM42 .
But the Exit EXIT_SAPLMGMU_001 gets triggered only during MM01/MM02 . Kindly guide me to solve this .
Thanks and Regards,
S.Sivakumar

Hi,
Business Requirement:
As per the client Business critical requirements, additional fields are
required in the Article Master. This is because the existing fields in
the Article master are not adequate to capture the data.
We have referred the SAP Note 925424 (Table MAW1) and 44410 (MARA) for
this.
Based on the above note 44410, we have added fields in MARA table,
since Manufacturing
activities are envisaged in future instead of proceeding with 925424.
Whether, MAW1 (925424) also to be considered?
Since this is very critical requirement from client, we cannot avoid
and do not have any
alternate solution.
These fields will be used in reports and pricing in sales &
distribution.
Apart from this, are there any other SAP notes to be referred?
Is there any restrictions there in length for fields to be used in MARA table .
By referring note 44410 , i added 20 fields in MARA table, in which some 4 fields are more than 40 characters .
All custom fields are updated in MM41 and MM42 .
Shall i proceed by this approach .Kindly guide me on this .
Thanks and Regards,
S.Sivakumar

Similar Messages

Adding custom fields in article master transaction - MM41.

Hi ,
Please find my requirement below.
Create a new custom field in the MM41->Logistic Distribution View->Other Logistic data.
The new field would be Shelf life which would be added in MARC table MARC-ZIPRKZ.
Now I would like to know how to bring this enhanced field MARC-ZIPRKZ into the Other Logistic data screen of MM41.
Have seen lot of discussion in the community. But a clear step by step procedural advice and guidance is highly appreciated.
Regards
Siva

Hi Siva:
Modification free enhancement of the article master is common. Part of this implementation is technical and part of this is functional configuration.
From a functional perspective, you'll want to consider far more than what you have indicated. For example:
MM41/42/43 Screen Sequence
Reference Handling – Field Selection Groups
Data Retention Levels / Copy Rules (e.g. when appending MARC)
Change Pointers
Conversion / Data Loading / ALE ARTMAS Inbound
ALE ARTMAS Outbound
MM46 Article Mass Update
WRFMASSMAT Integrated Mass Change
F4 Help / Check Tables
Text Tables / Translation
As far as data retention levels for extended fields, you can distribute customer-defined fields for MARC and other tables without including new segments in the IDoc.
Please consider:
Create Programs for Customized Subscreens
Menu Path: SPRO > Logistics - General > Material Master > Configuring the Material Master > Create Program for Customized Subscreen
Read the IMG documentation here!
Screen SequenceMenu Path: SPRO > Logistics - General > Material Master > Configuring the Material Master > Define Structure of Data Screens for Each Screen Sequence
Assign Screen Sequence to Article TypesMenu Path: SPRO > Logistics - General > Material Master > Configuring the Material Master > Maintain Order of Main and Additional Screen
BadI and User Exit for MM46
BadI for WRFMASSMAT (see SAP Note 1024725)

Adding custom field to product master general tab

Hi All,
i want to add a custom field in Product master creation (commpr01) ,could any one help me out on this !
Many thanks and Regards.

Hi
You can create field using EEWB or follow the following simple process
1. Create the required field as " attribute" using the tcode COMM_ATTRSET
2. Assign it to a set type using the same tcode COMM_ATTRSET
3. Assign this set type to the product category usign the tcode COMM_HIERARCHY in the set type tab and use the view ID as "BASIC"
The field will then be available to you in the product master to the products with are created with the named product category
Hope this helps
Regards
Rekha Dadwal
Edited by: Rekha Dadwal on Mar 19, 2008 1:19 PM

Adding custom fields to Equipment master General tab ?

Hi Gurus,
I have requirement where in I need to add two custom fields in IE02/IE03.
Completed part :
1. The new fields are added in the EQUI table in CI_EQUI structure.
2. Created a project in CMOD and linked enhancement ITOB0001 to it .
3. Activated the User exits EXIT_SAPLITO0_001 and EXIT_SAPLITO0_002.
4. Logic in EXIT_SAPLITO0_001
E_SUBSCREEN_NUMBER = '1020'.
I_OBJECT_TYPE = '02'.
I_ACTIVITY_TYPE = '3'.
EQUI-zfld1 = I_DATA_EQUI-zfld1.
EQUI-zfld2 = I_DATA_EQUI-zfld2.
Logic in EXIT_SAPLITO0_002
E_UPDATE_DATA_EQ-zfld1 = EQUI-zfld1.
E_UPDATE_FLAGS_EQ-zfld1= 'X'.
E_UPDATE_DATA_EQ-zfld2 = EQUI-zfld2.
E_UPDATE_FLAGS_EQ-zfld2 = 'X'.
Now the place where I got stuck is do I need to create a subscreen to add these new fields in SAPLITO0 , 1020 screen ?
Do I need to create a Function group ? If yes how do I link these.
I think I need access to Edit from SE51.
I have browsed many threads but no luck.
Thanks
Navya.

No, just
Read carefully the SMOD enhancement documentation
During CMOD execution, double-click on one of the Customer-exit dynpro (first time, choice the first one, the other dynpros will be used later for other objects)
In EXIT_SAPLITO0_001, pass the dynpro number in export parameter (e.g. 1000 for first one)
NB: In this exit you receive I_OBJECT_TYPE as imported parameter to identify Object Type: '1' = F/L '2' = EQU '3' = SER (do not try to change it ) so include may start with a CASE I_OBJECT_TYPE. WHEN 'EQU'. E_SUBSCREEN_NUMBER = '1000'... ENDCASE.
Regards,
Raymond

Custom fields on Material Master - ECC6.0

Hello
We have added custom fields on material master basic data screen following these steps :
1) Copied Func. grp MGD1 to Z Fgrp via Spro -> Logistics General ..
2) Created a subscreen in Z fungrp by copying screen from original program.
3) Deleted the unwanted fields and added new fields to the layout and Fields in PAI.
4) Attached the subscreen in screen sequuence via SPRO
We are now able to see the new fields on the baisc data screen and also able to input data in these fields , but on SAVE the data is not getting saved to database table MARA.
We have also referred to OSS note 44410 but with no help.
Are we missing something , is there anything additional that needs to be done in ECC6.0 ?
Thanks

Hi Kalidas,
In your customized subscreen, did you update the PAI to include your custom field?
process before output.
* Verarbeitung vor der Ausgabe
module init_sub.
module get_daten_sub.
module feldauswahl.
module sonderfaus.
module sonfausw_in_fgruppen.
module feldhistorie. "Aenderungsdienst
module bildstatus.
module zusref_vorschlagen_b.
module refdaten_vorschlagen.
module zusref_vorschlagen_a.
module set_daten_sub.
process after input.
module get_daten_sub.
* Put your custom fields here to copy to structure for saving
field: mara-zzcustom.
module set_daten_sub.

Adding custom fields to FD32

Hi All,
I need to add 4 new fields to "Status" screen of FD32 transaction. I cannot use the already existing standard fields so I need to add custom fields. I have searched the forum and found the following enhancement and BADI :
RFDRRANZ
FI_DUZI_ROUND_CML
I tried to implement them but did not achieve the results that I wanted.
There are so many forums on this topic but none of them had an actual solution.
Did any had success adding custom fields to FD32? If yes, could you please let me know the solution.
Thank You,
Sonali.

Hi,
Business Requirement:
As per the client Business critical requirements, additional fields are
required in the Article Master. This is because the existing fields in
the Article master are not adequate to capture the data.
We have referred the SAP Note 925424 (Table MAW1) and 44410 (MARA) for
this.
Based on the above note 44410, we have added fields in MARA table,
since Manufacturing
activities are envisaged in future instead of proceeding with 925424.
Whether, MAW1 (925424) also to be considered?
Since this is very critical requirement from client, we cannot avoid
and do not have any
alternate solution.
These fields will be used in reports and pricing in sales &
distribution.
Apart from this, are there any other SAP notes to be referred?
Is there any restrictions there in length for fields to be used in MARA table .
By referring note 44410 , i added 20 fields in MARA table, in which some 4 fields are more than 40 characters .
All custom fields are updated in MM41 and MM42 .
Shall i proceed by this approach .Kindly guide me on this .
Thanks and Regards,
S.Sivakumar

Article master (mm41) through eewb

Hai all,
Is it possible to add fields to MM41 transaction through eewb transaction??if yes please tell me the steps else please tell me a way to add fields i had checked for screen exits and badi's .
Thanks in advance

Hi,
Business Requirement:
As per the client Business critical requirements, additional fields are
required in the Article Master. This is because the existing fields in
the Article master are not adequate to capture the data.
We have referred the SAP Note 925424 (Table MAW1) and 44410 (MARA) for
this.
Based on the above note 44410, we have added fields in MARA table,
since Manufacturing
activities are envisaged in future instead of proceeding with 925424.
Whether, MAW1 (925424) also to be considered?
Since this is very critical requirement from client, we cannot avoid
and do not have any
alternate solution.
These fields will be used in reports and pricing in sales &
distribution.
Apart from this, are there any other SAP notes to be referred?
Is there any restrictions there in length for fields to be used in MARA table .
By referring note 44410 , i added 20 fields in MARA table, in which some 4 fields are more than 40 characters .
All custom fields are updated in MM41 and MM42 .
Shall i proceed by this approach .Kindly guide me on this .
Thanks and Regards,
S.Sivakumar

Custom field in Vendor Master - track field changes

Hi Experts,
I have a requirement to enhance vendor master (XK01) by adding custom fields. I did this, but now the customer needs to track changes made to this field. He expects to see the changes made to this custom field using menu path 'Environment -> Field Changes' from vendor master transactions (XK01, XK02, XK03). I have enabled the track changes in the data element, so that field changes can be tracked in CDPOS, but that is not enough. Please help to find solution. Thanks.
Regards
Arun

Hi Brad,
I added the new fields to vendor master using the SPRO option:
'Prepare Modification-Free enhancement of Vendor Master Record' in the following path:
Logistics-General -> Business Partner -> Vendors -> Control -> Adoption of customer's own master data fields. This created a button on vendor master, and my field is in a pop up box which is generated on click of this button.
This field is stored in LFM2 table.
I have enabled the change flag in the data element of the custom field, and it is showning the field changes in CDPOS table.
But the problem I face is how I can avoid going to the CDPOS table and instead use the menu option :
'Environment -> Field Changes'
Regards
Arun

Adding Custom Fields to XD99, XK99

Hi,
I have a requirement to add custom fields to Customer and Vendor master transaction which are mass maintained.
XD99 and XK99 are the transaction codes. I found notes on adding custom fields to mass maintain MM17, however did not find any solution as of now to add custom fields to XD99 and XK99.
If anyone has worked on it, kindly provide me details if there is any Badi/User exit/Enhancement point to achieve this.
Regards,
Sneha Soni.

This works well with standard fields, but check [Note 216596 - Include additional fields in mass maintenance|https://service.sap.com/sap/support/notes/216596] and [Note 414020 - MASS: Customer fields are not mass-maintainable|https://service.sap.com/sap/support/notes/414020]
Regards,
Raymond

Screen Exit for adding custom fields in Additional Data tab in ME21N

I need a screen exit or whatever other method for adding custom fields to the additional data tab at header level.
I also need a similar exit for adding a filed at item level.
Thanks in advance
Martin

Hello,
1st find badi or exit and then create screen ...and assign the screen group and screen no for that implementation....some steps i can give u i did with SPRO tcode....
please check it for VA02
SPRO u2013 SAP Reference IMG --- Logistics General --- Basic partner u2013 customers -- Control u2013 Adaption of customers own masters data element u2013 prepare modification of customer free enhancement of customer master record
1)Screen group                                  description
        zs                                           creating badi      --- (save)
       click on (label tab pages) u2013 new entries
       number u2013 10 , function code u2013 zs10 , description u2013 func ---(save) u2013(back)
2)select (FM_CUSTOMER_ADD) u2013 copy
     Implementation name u2013 ZAS
     (desc u2013 impl for cust) u2013 (save)
    interfaceu2014(check_add_on_active) double click on it
3)the above screen appear -- write the code in it u2013 (save) --- (activate) u2013 (back) u2013 (save)
     -- (activate) u2013 (back)
   Business adds in customer sub screens
4)select (FM_CUSTOMER_ADD) u2013 copy
     Implementation name u2013 ZAS1
     (description -- cust) u2013 in attribute u2013 (give screen group name)
5)go to interfaces (GET_TAXI_SCREEN) double click on it
   (save) --- (activate)
6)(SAVE) --
    Goto SE38 -- CREATE PROGRAM WITH NAME (ZQW) type module pool
     Goto SE51 -- Prog : ZQW
       Screen : 200 (Create)
      Goto layout u2013 design the screen
7)save u2013 activate
   then goto transaction : va02
For User Exit's
goto to tcode->status->program name->double click on that,
then goto to-> attribute take the package name and
Goto SMOD tcode ->Utilities->give the package name and F8
then a list of exits will display for that tcode as well as that package.
u can check the table MODSAP
u can check the table MODACT
For BADI's,
1)goto to tcode SE24 give the CL_EXITHANDLER and display and then double click on the GET_INSTANCE
keep Break point at this location 'call method cl_exithandler=>get_class_name_by_interface'
then the tcode it will trigger there and we can debugg there we can find badi'for that tcode and then remove the break point.
2)Goto to tcode->status->program name->double click on that program will display's
then press crtl+F then cl_exithandler
Thank u ,
santhosh

Adding Customer Fields to AS91 - Asset Management

Has anyone added customer fields to the AS91 transaction. I'm writing a conversion program to load legacy data and I would like to add more fields to the Origin tab. If I can't do that, then I would like to add another tab to the transaction. There is a CI_ANLU include which allows me to add the fields to the Asset Master Record, but there's not any screen exits to add those custom fields to the screen.
Thanks.
Linda

Do following.
1. Go to Transaction AOLA.Its a customising Transaction.
2. Create your own Layout for ex. ZSAP.
3. Go to tab page titles and make sure you have all tabs in place.
4. Select tab where you want to put.
6. Add a record in it.
5. Under Groups you will find your screen prefix with U.for example if screen number is 9001 then under group box you will find U9001.
Check Transaction AOLK. Where you have to assign layout to Asset Class.
That will display the User defined screens in that tab.
In SPRO following is the path.
SPRO->Financial accounting->Asset Accounting->Master Data->Screen Layout
Message was edited by: Deepak Bhalla

Adding custom fields to Embedded Search

Hi All,
I have read the post [here|How to add custom fields to Embedded Search; about adding custom fields to Embedded Search. I am looking to add Employee Subgroup for use in Talent Management (specifically the STVN SuccessionPlanning component) and wanted to know if anyone can expand on the instructions in the link to add this field.
It appears to be part of the HRTMC_PERSON search object connector already and while I've done some IMG configuration the field is showing in SuccessionPlanning, but not displaying any data.
Additionally, I'd be interested in any tips to add information that is not from PA0002 should it be required in the future.
Many thanks,
Luke

Hi Luke,
I am assuming here that your search request fields are based on HRTCM_CENTRALPERSON search template. To enable your search to work on employee subgroup please do the following
1) Check if the HRTMC_PERSON Template extracts the data from Infotype 0001 via SPRO node 'Define Search Models and Change Pointer' Extraction Class is 'CL_HRTMC_SEARCH_READ_PA_INFTY'.
2) Via ESH_COCKPIT, goto Template Modeler and select your custom Software Component and press Edit. Goto roadmap step 5 - Define Requests - where all search request fields are defined. Its using these fields Talent search works.
3) Select the search request e.g. 'SAP_TALENT_NAKISA', it would then show list searchable attributes in below table. Using 'Add' button select path for PERSK so that it can searched.
It would look like this once selected
OBJID(REL_CP_P)->HRTMC_REL_CP_P_209.REL_CP_P(REL_CP)->HRTMC_PERSON.OBJID->HRTMC_PERSON.ORG_ASSIGNMENT
4) In step SPRO 'Define Search Requests and Search Field Names' , define Employee subgroup field with AliasSearchField = PERSK since thats what is defined in roadmap step 5.
Hope it helps!
Regards,
Ricky Shah

Adding custom fields through SE51

Hi All!
This is with regards to adding custom fields through Se51 to standard screens.I had added custom field KNVV-ZZKVGR6 to the screen.
After drawing the text and I/O buttons.When I activate I am getting an syntax error saying Field KNVV-ZZKVGR6 is defined differently in screen (ABAP/4 field,Dictionary field).
What does this mean.
Also if i activate with a SAP standard field instead of the custom it is getting activated.
But for both the ways I could not able to see the output on the actual transaction.Also the new drawings which i am drawing are in brown color(different form the existing one)
Please advise.
regards
Praneeth

hi Praneeth,
what is the program name,screen number you are trying to modify..,and after appending the field ZZKVGR6 to KNVV , now go to table and choose menu Utilities->Data base Utility-> now click on Activate and Adjust the Data base, then try to add the field.
and are you adding the field from Dictionary (i.e you have option Get From Dictionary in that give KNVV table name it will list the fields, choose zzkvgr6 from it, and place it in your screen.)
the exit which you are adding should be appropriate one
or else you won't get the desired results. what is the exit..
Regards
vijay

While adding custom field in urgent change-Create new field button in AET is not coming

Dear All,
we have requirement to add some custom fields in urgent change document. while adding custom fields using AET, create new field button is not coming.
Thanks in advance. points will be awarded.
Rahul

Hi Jignesh,
Thanks for your valueble inputs, it really helped me to understand the process.
I checked in Web UI configuration for urgent change document as you mentioned but still that button is not coming.
In transaction BSP_WD_CMPWB, i have created enh. set: Z_ENHANCEMENT_SET.
Can you tell what to selelect in application and page popup which comes after selecting Enhance component button. Actually i tried but i am not able to add new record in conf.
Thanks in advance.

CRM 7.0 / IS-U: adding custom fields to Business agreement for replication

Hello Experts!
We're working on replication of custom fields from IS-U to CRM 7.0.
Can you help me with clarification of my understanding of these questions..?
1) CRM/IS-U mapping tables for buag_main:
Business Agreement(BUAG_MAIN) is a BO in CRM that corresponds to CRM table CRMM_BUAG and to Contract account in IS-U table FKKVKP.
Table FKKVKP were enhanced with some z-fields,
so we are going to enhance corresponding CRM table CRMM_BUAG (or CRMM_BUAG_H) with that new fields..
But we see that these CRM and IS-U tables have far not the same field structures..
So, the question: Which crm and is-u tables i should look, enhance and replicate for Business agreement?
2) Access to Business agreement with possibility to add custom field:
I couldn't find in Web UI where i can directly edit profile of Business Agreement..
I've found just access to assignment block "Business agreement" on Account's profile overview page..(Role ServicePRO; Account details).
There I used AET to add custom field..but I faced with problem when the 1st popup appeared: there was no enhanced object "Business Agreement"..
Also in role "Utilities IC Agent" i've found "business agreement" profile but there I don't see buttons for adding custom fields..
So, the question is: Where I can access Business agreement profile to enhance it with custom fields for replication with IS-U?
3) CRM/IS-U data exchange functions:
I tend to use tcode CRMC_BUT_CALL_FU:
for CRM inbound event of BUAG object - FM CRM_BUAG_MWX_PROCESS_EXT_STRUC..(as template).
Question: Am I right that it fits my requirement to replicate custom fields from IS-U to CRM?
Please tell me if you need more information..
Looking forward to your answers.
Thank you a lot in advance!
Kind regards,
Evgenia

Hi Gobi,
Thank you for advice. But:
I've created fields not by using AET - I used documentation that Nicolas suggested me above.
I've enhanced tables and structures that were mentioned there with my z-fields for both sides (CRM and ERP).
Also I looked CRMC_BUT_CALL_FU for CRM Inbound BUAG_MAIN - corresponding standard FMs are marked for call.
Any ideas?
Thanks in advance.
BR,
Evgenia

Adding custom fields to Article Master (MM41/MM42)

Similar Messages

Maybe you are looking for