Adding Custom fields to standard SAP-EBP application

Hi,
A functionality requires some custom fields to be added to the standard SAP-SRM EBP ( Manage business partners) application.
If I copy the whole BBP_VENDOR_CREATE program into a Z-program, and the BBPMAININT internet service to a Z-application, then would it be feasible??
Which is the best way to add custom fields in a SAP standard EBP application--in the 'Manage business partners' section.
Regards,
Goutam

Hi
I don't think it's easily possible to add custom fields to the existing transaction - BBPMAININT.
For adding customer fields you can refer the SAP OSS not - 672960, but I don't think it will be of much help here.
Since SAP has not upgraded this transaction - BBPMAININT for a quite long time, you need to do all the logic and validation from your end.
Better to go for you own Z (custom program) and make your logic accordingly.
Regards
- Atul

Similar Messages

Adding Custom fields to standard SAP-ITS application.

Hi,
A functionality requires some custom fields to be added to the standard SAP-SRM EBP ( Manage business partners) application.
If I copy the whole BBP_VENDOR_CREATE program into a Z-program, and the BBPMAININT internet service to a Z-application, then would it be feasible??
Which is the best way to add custom fields in a SAP standard ITS application.
Regards,
Goutam

Hi Goutam,
> If I copy the whole BBP_VENDOR_CREATE program into a
> Z-program, and the BBPMAININT internet service to a
> Z-application, then would it be feasible??
Yes, I think so.
Best regards,
Henning

Re :adding custom fields to standard transaction

Hi ..
I've added custom fields to vbap table..I have also
added these fields in the va02 screen.
Now whatever values I enter for the zfields(va02 ) must be saved in vbap table.
How do i do this?.
Should I write in MV45AIZZ .(PAI).
what are the steps i have to follow?.
Thanks and regards..
tharun venkat

zfield in the program means the corresponding field name u have given for the newly added field in the table.
IN the layout u might have added some field ad have given some name (I/O) field name.

Adding Custom Fields in Standard View - How to save data to Table

Dear Experts,
One View is having UI elements from a standard table /RPM/ITEM_D. Added 2 custom fields in this table using enhacement. Now enhanced that standard View and added these 2 custom fields. When I am saving the application, these 2 fields values aslo should be saved. In the context all fields are present from table /RPM/ITEM_D except the custom one. Can you please help me out how to acheive this.
Thanks and Regards
Sumesh

Hi Sumesh,
What you need to do is :
1) add these two new fields in the same context node where the field from table /RPM/ITEM_D are added.
2) in your UI , bind values to these new attributes.
If current application is using and BAPI / Class method to update the table ,
this new fields will also be passed to that bapi and will update table.
Regards,
Ashish Shah

Adding custom fields to standard Asset Accounting ALV reports

Hello,
I have recently added some fields to the Asset Master table ANLU using the customizing include CI_ANLU. I have also added some fields using an append structure to ANLZ. I now need to have these fields available in the standard reports for Asset Accounting. One example is the report generated for transaction S_ALR_87011963. I need the new fields available in the 'Displayed Columns' list when clicking the Change Layout icon. Any suggestions?
Thanks,
JR

Hi Vignesh,
Adding new fields is not possible, but custom subscreens can be added.
Check enhancements QQMA0001 (subscreen for notification header) and QQMA0008 (subscreen for additional data).
It might help you.
Thanks & Regards,
Swati

Adding custom fields to standard table control in IW51

Hi,
I have added 4 custom fields to the standard table QMEL through the structure CI_QMEL .
In transaction IW51 there is a table control as show in the screenshot below.
The 4 custom fields which i have added in the standard table should also be added to this table control.
Can this achieved by making adjustments in SPRO settings or can it be acheived technically by using some exit?
Thanks in advance.
Regards,
Vignesh Sunkasi.K

Hi Vignesh,
Adding new fields is not possible, but custom subscreens can be added.
Check enhancements QQMA0001 (subscreen for notification header) and QQMA0008 (subscreen for additional data).
It might help you.
Thanks & Regards,
Swati

Adding additional fields on standard SAP pop up box

Hi Experts!!
I have to enhance IT0378(Adjustment Reasons) with additional fields. Same time I have to enhance a pop box wich is generating in IT0171( General Benefits) in CE workbench.
( if you click on workbench, we get a popbox with a statement ' Benefit data for other Personnel assignments' . Selet green right mark with name 'work bench'. It will take you to Concurrent Employment Benefit Workbench screen. Choose any position in the left side then select create Adjustement reason button. you will get a pop box. Exaclty here i have to add the fields whatever i am going to enhace in IT0378 )
Could you please give some easy steps to get it done.
Regards,
Ravi Visarapu.

http://wiki.ittoolbox.com/index.php/Implement_a_screen_exit_to_a_standard_SAP_transaction

Adding a custom field in a sap standard screen in pa30 for an infotype.

Hi to all..
i'm in a requirement to add a custom field in a standard screen of pa30. for the infotype 0442.
I googled up.. but i was not getting proper solution for it.. can any one provide a solution for it..
With regards.
Aahbha.

Hello Sirs,
Step by step instructions on:
http://help.sap.com/erp2005_ehp_04/helpdata/EN/4f/d52552575e11d189270000e8322f96/frameset.htm
The below thread provide more info on how to create an infotype from scratch, but this is just for the reference:
add custom fields to standard infotype
Regards,
Bentow.

Adding custom fields on SAP standard screen

Hi,
I have to add some custom fields in the SAP defined standard screen. When I go to that particular screen and try to change it to 'CHANGE' mode , it asks for Access Key. Please suggest me, how to add the custom fields.
RGDs,
Gsaasg

Hi,
For this only there are enhancements, Just search for screen exits in the SDN or google for
your transaction and also search for BADI's.
Regards and Best wishes.

Adding Custom Fields - Application Enhancement Tool - SAP Library

To add a comment, please log in or register on the top of this page and choose Reply. Please write your comment in English.
You can also go back to the SAP help page.

Hi,
AET(Application Enhancement Tool) is able to create custom field for almost all CRM application.
Please go to transaction AXTREG to see which "Business Object" is enhanceable.
AET is also able to create custom field for ERP on CRM system. It will enhance the BOL structure which is shown in ERP_H component. However, you need to create the field on the ERP system as well. This is not supported by AET.
Regards,
Steve

Regarding adding a Custom field to Standard Table

Hi ABAPers,
Can any one explain the below spec-description.
"The purpose of this design is to provide the foundation for a more automated solution to the invoice reconciliation process. This design calls for adding a custom field to the standard SAP table EINE as well as a data maintenance tool for the same. There will also be a new custom table for storing values associated with the new EINE field. These new tables will also provide users with the ability to determine which PIR are soon to expire."
We have to add one custom field to standard table EINE, how we can add this custom field to STND table.
According to me we can add it through append structure. is it correct or not.
and what is data maintenance tool.
Pls.............Explain in details.
Thanks in advance.
Regards,
Ramana Prasad. T

Hi,
Goto SE11 ,give ur table name.Then press display button.Then in the application tool bar press on append structure ...Now create a zstructure and add ur custom field and then activate the table.
Regards,
nagaraj

How to add custom fields to the sap standard program ukm_bp_display

How to add new custom fields to the sap standard program ukm_bp_display .
could u please any one help me on this?

Hello Kumar,
You have to modify below structure, as this structure is providing the field catalog for output display (ALV).
Here you can see there are a lot of include structures, so if you want to add fields in the output display you can add those fileds as an append structure to any of the below mentioned structures (Like ukm_s_account, ukm_s_bp_cms_sgm etc as per your requiremnt and positon at which you need to dispaly your fields.)
DATA: BEGIN OF gt_grid_alv OCCURS 0.
       partner LIKE but000-partner,
       credit_sgmnt LIKE ukmbp_cms_sgm-credit_sgmnt.
        INCLUDE STRUCTURE ukm_s_account.
        INCLUDE STRUCTURE ukm_s_bp_cms_sgm.
DATA:   credit_sgmnt_txt LIKE ukmcred_sgm0t-credit_sgmnt_txt.
      Gruppe Vector
        INCLUDE STRUCTURE ukm_s_bp_vector.
      Gruppe OBL = Obligo
      include structure UKM_S_BP_CMS_MALUSDSP_OUT.
        INCLUDE STRUCTURE ukm_s_display_segment.
        INCLUDE STRUCTURE ukm_s_bp_cms.
        INCLUDE STRUCTURE bus000_dat.
*DATA:   icon(4).
      Gruppe RAST (Raster)
DATA:
         rast01 LIKE ukm_s_display_segment-AMOUNT_GRID,
         rast02 LIKE ukm_s_display_segment-AMOUNT_GRID,
         rast03 LIKE ukm_s_display_segment-AMOUNT_GRID,
         rast04 LIKE ukm_s_display_segment-AMOUNT_GRID,
         rast05 LIKE ukm_s_display_segment-AMOUNT_GRID,
         rast06 LIKE ukm_s_display_segment-AMOUNT_GRID.
DATA:    rast2_6 LIKE ukm_s_display_segment-AMOUNT_GRID.
"Summe raster 2 bis 6
DATA: END OF gt_grid_alv.
Another way is you can go to SE38, and you can create implicit enhancements.One enhancement point is available here in this required area. so create an implementation and add your fileds with data types.This way is also simple.
Hope this will solve yiour problems.
Regards,
Antony Thomas

Adding field in standard SAP transaction output results.

Hi,
I have to add a new field in standard SAP transaction output results.
Can any one tell me what are the ways (brief explanation) that I can do this?
If using exists - then what kind of exists I have to use? And how to find out the possibility with user exists?
Thanks for your time.
Thanks.
Chris.

Hi,
There are so many ways to find out the user exits.
Hi,
To see SAP Exits -> Use Tcode SMOD
To See create a project for Customer Exits -> Use Tcode CMOD
There are projects to which Exits are assigned. Selects the relevant projects.
What is User Exit:
http://www.sap-img.com/abap/what-is-user-exits.htm
How to find then:
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
All Exits List:
http://www.easymarketplace.de/userexit.php
Do a search on SAP Exits, Customer Exits, enhancements, etc
Step 1 :- Execute transaction
step 2 :- Click on Status Menu
step 3 :- Double click on the program (screen) __?????___
Step 4 :- Search source code for the 'Customer-Function' string using the find button. Remember to select 'In main program'.
Step 5 :- A list of search results should be displayed indicating where all function exits can be found.
You can now double click on each of them to go to its position in the source code. This also
allows for the insertion of breakpoints so that you can test if the exits are called in the
appropriate place.
Step 6 :-Once you have found the Function Exit within the source code (Find Function Exit) you need to
access the actual function module it executes. This is done using the following steps:
Step 6.1 :-
Step 1
Locate desired 'Call Customer-function' statement within source code.
Step 2
If code is not within main program (module pool) e.g. SAP* then you will need to find this
out by selecting 'Main Program' from the 'GOTO' menu. The Main program for transaction
Step 3
The actual function module name can now be calculated based on the information retrieved,
it is defined by the following format:
EXIT_<Program name>_<Exit number>
eg :- 'EXIT_SAPLMR1M_004'.
Step 7.1:-
Once you have found the Exit function module
Step 1
Execute transaction CMOD
Step 2
Select 'SAP Enhancements' from the 'Utilities' menu.
Step 3
Select 'All selections' from the 'Edit' menu.
Step 4
Now populate the Component name field with the exit function module and press
the execute button.
Step 5
A list of all Exits(Enhancements) containing that function module should now be displayed.
Step 5
You can now double click on the desired exit to display a detailed description of its uses and a list of all
components contained in it.
Implementing Function Exit
This is required in-order to activate Function exit:
Step 1
The first step is to enter source code into function module in the usual way i.e. via SE37.
There will already be an include declaration within the code with the following
format: Include zx*.
Double click on this to create it, source code can then be entered within here.
Although it is good practice to create another include with this to store your
code, this allows separation of difference enhancements allowing them to be easlity
removed without de-activating the enhancement.
Step 2
Execute transaction CMOD and create new Enhancement. Enter name and press the create
Button.
Step 3
The following screen should be displayed, enter short text then click on the 'Enhancement
Step 4
Now enter the Exit name (enhancement) which contains the desired Function Exit.
Step 5
Return to initial screen of CMOD and press the activate icon. The exit is now ready for use.
Please Mark The Helfull Answers & close the thread.
regards
dj
reward for all useful answers.

Adding custom fields through SE51

Hi All!
This is with regards to adding custom fields through Se51 to standard screens.I had added custom field KNVV-ZZKVGR6 to the screen.
After drawing the text and I/O buttons.When I activate I am getting an syntax error saying Field KNVV-ZZKVGR6 is defined differently in screen (ABAP/4 field,Dictionary field).
What does this mean.
Also if i activate with a SAP standard field instead of the custom it is getting activated.
But for both the ways I could not able to see the output on the actual transaction.Also the new drawings which i am drawing are in brown color(different form the existing one)
Please advise.
regards
Praneeth

hi Praneeth,
what is the program name,screen number you are trying to modify..,and after appending the field ZZKVGR6 to KNVV , now go to table and choose menu Utilities->Data base Utility-> now click on Activate and Adjust the Data base, then try to add the field.
and are you adding the field from Dictionary (i.e you have option Get From Dictionary in that give KNVV table name it will list the fields, choose zzkvgr6 from it, and place it in your screen.)
the exit which you are adding should be appropriate one
or else you won't get the desired results. what is the exit..
Regards
vijay

Adding Custom Fields to FAGLFLEXP Table

Hello,
We have a requirement to update WBS Element for Planning related Data. So have added custom field(WBS Element) in structure CI_FAGLFLEX04.
The field is visible when I open FAGLFLEXP table, but when I post data The custom field (WBS Element) is not being updated. Could you please let me know the process to update this field?
Thank you in advance.

Hi.
The procedure isn't so simple. There are several posts on the subject SCN. I suggest research before you start developing.
Start here:
https://help.sap.com/saphelp_nw04s/helpdata/en/cf/21eb61446011d189700000e8322d00/content.htm
However, the most important is: a) Is it really necessary to change the standard? b) There could be a Z table containing the new information and referencing FAGLFLEXP? c) What is the transaction that will keep the data? It has Exit´s for what you need?
As Vadamalai said below,
Actually your approach may be wrong, first as an ABAPer should ask to functional team, which transaction and where to insert the fields, it could be header or item level(I am saying example)
Based on tcode, you need to enhance the table level as well as the screen exit/BADI we need to pass screen to internal programming structure. the structure type will be table type of FAGLFLEXP.
Regards.
Douglas

Adding Custom fields to standard SAP-EBP application

Similar Messages

Maybe you are looking for