Adding custom fields to table view assignment block

Hi All,
  I want to add two news fields to 'Service Contract Item Level' in 'Object List' assignment block. How can i add these two custom fields to table view assignment block using AET. I have tried to add new fields using AET but there is no business object supports to my requirement.
Thanks & Regards
Nitish

Hi Nitish,
As naveen sadid use Cutomer_i object . I guess it will be more appropriate.
And following link will be helpful for AET creation.
CRM 7.0 How to --4 Adding Custom Fields With The New Application Enhancement Tool (AET)
Regards
Loks

Similar Messages

  • Adding Custom Fields in Standard View - How to save data to Table

    Dear Experts,
    One View is having UI elements from a standard table /RPM/ITEM_D. Added 2 custom fields in this table using enhacement. Now enhanced that standard View and added these 2 custom fields. When I am saving the application, these 2 fields values aslo should be saved. In the context all fields are present from table /RPM/ITEM_D except the custom one. Can you please help me out how to acheive this.
    Thanks and Regards
    Sumesh

    Hi Sumesh,
    What you need to do is :
    1) add these two new fields in the same context node where the field from table /RPM/ITEM_D are added.
    2) in your UI , bind values to these new attributes.
    If current application is using and BAPI / Class method to update the table ,
    this new fields will also be passed to that bapi and will update table.
    Regards,
    Ashish Shah

  • Adding custom fields in table control of infotype 0591

    Dear Experts,
    My requirement is to add custom fields x y z  in the Table contol of the standard infotype 0591 (Nominations) screen in PA30 tcode.
    Is it possible to add the fields in table control after the fields share,guardian's address, without using access key.
    if  so, help me to know the procedure.
    Please suggest.
    Warm Regards
    Sinde.

    hi..
    a thread already exists with the same Subject.. pls check if it helps u....

  • Adding custom fields in table control of PO

    Hi Everyone,
    I have a requirement which i need to display the custom fields in the Table Control(Item Overview) of PO. Since our Version is 4.6C there is no badi's avilable to do the changes. Please let me know how can we solve this problem.
    Mentors: Forgive me if it is repeated Post...
    Edited by: subas  Bose on Feb 5, 2010 12:10 AM

    Hi,
    Search for user exit...either screen or field exit..this will solve your problem.
    Small help on how to find a exit;
    1. find out the package
    2. go to se84 with the help of package in the cutom exit tab look for all the exit.
    3.put the brek point and tack where you can get the solution.
    Pooja

  • Adding custom fields to DB table

    Hi,
    I added custom fields in std DB table using CI_* , activated table using SE14. Now I want to remove the added custom fields , I deleted the CI_* using SE11. It still appears in DB table,  I mean I dont expect to disappear from DB table, when I double click it still takes to structure screen. I deleted include from SE80 also selecting Package, activated and adjusted DB table from SE14 after deletion, but it still appears and when I check the attributes it shows the same package , how to reset the CI_* , bottom line ,I want to make DB table normal as before, because of that I am getting dumps when I execute std DB table related T codes.
    It should be done in easy way but not able to get breakthrough.
    Please let me know your suggestions.
    Thanks

    Hi Sai,
    Try to assign the CI_* structure to $temp,i.e as local object and then activate it first.
    After that, try deleting the local object and adjust the table using SE14.
    If still it does not work, ask your BASIS consultant to do an "Alter table".
    May be that works!
    Thanks & Regards,
    Anshumita.

  • Adding Custom Fields to FAGLFLEXP Table

    Hello,
    We have a requirement to update WBS Element for Planning related Data. So have added custom field(WBS Element)  in structure CI_FAGLFLEX04.
    The field is visible when I open FAGLFLEXP table, but when I post data The custom field (WBS Element) is not being updated. Could you please let me know the process to update this field?
    Thank you in advance.

    Hi.
    The procedure isn't so simple. There are several posts on the subject SCN. I suggest research before you start developing.
    Start here:
    https://help.sap.com/saphelp_nw04s/helpdata/en/cf/21eb61446011d189700000e8322d00/content.htm
    However, the most important is: a) Is it really necessary to change the standard? b) There could be a Z table containing the new information and referencing FAGLFLEXP? c) What is the transaction that will keep the data? It has Exit´s for what you need?
    As Vadamalai said below,
    Actually your approach may be wrong, first as an ABAPer should ask to functional team, which transaction and where to insert the fields, it could be header or item level(I am saying example)
    Based on tcode, you need to enhance the table level as well as the screen exit/BADI we need to pass screen to internal programming structure. the structure type will be table type of FAGLFLEXP.
    Regards.
    Douglas

  • Adding Custom Fields to BSEG and BKPF Tables

    Hi All,
    My customer would like to add around 5 fields to BKPF table and 6-7 fields to BSEG table. Can you all suggest me whether it would be a good idea to add any custom field to these tables ? I would like to mention that standard fields available in these tables will not be used for the requirements of the customer and he is insisting on adding custom fields. I need your expert advice on this matter.
    Regards,
    Rohit

    Hi Friend,
    Please do not add any custom fields in those tables.
    These two tables are pillar of accounting entries in SAP, if you want to push them then it is OK, otherwise find some other way.
    Regards
    Krishnendu

  • Adding Custom fields to SRM Item Data tab & Account Assignment Tab

    Hi Everyone,
    We have got a small requirement to add 2 custom fields in SRM Shopping cart.
    Need to add a input field, which should act just like Requisitioner in ECC. ( F4 help ).This will allow to create shopping cart on behalf of some one.
    Need to add input field, which resembles Goods Recipient in ECC ( Free text)
    After adding custom fields, how do i ensure that, it's mapped to right field in ECC.I spent much browsing SRM forum, but couldn't gather much information. I understood that, this involves configuration in SPRO.
    Any information or help in any kind would be really helpful.
    Thanks in advance.
    Vishnu

    Hi Vishnu,
    Take look at this link.
    Add custom field to SC and POWL
    Thanks
    Senthil

  • CRM 7.0 / IS-U: adding custom fields to Business agreement for replication

    Hello Experts!
    We're working on replication of custom fields from IS-U to CRM 7.0.
    Can you help me with clarification of my understanding of these questions..?
    1) CRM/IS-U mapping tables for buag_main:
    Business Agreement(BUAG_MAIN) is a BO in CRM that corresponds to CRM table CRMM_BUAG and to Contract account in IS-U table FKKVKP.
    Table FKKVKP were enhanced with some z-fields,
    so we are going to enhance corresponding CRM table CRMM_BUAG (or CRMM_BUAG_H) with that new fields..
    But we see that these CRM and IS-U tables have far not the same field structures..
    So, the question: Which crm and is-u tables i should look, enhance and replicate for Business agreement?
    2) Access to Business agreement with possibility to add custom field:
    I couldn't find in Web UI where i can directly edit profile of Business Agreement..
    I've found just access to assignment block "Business agreement" on Account's profile overview page..(Role ServicePRO; Account details).
    There I used AET to add custom field..but I faced with problem when the 1st popup appeared: there was no enhanced object "Business Agreement"..
    Also in role "Utilities IC Agent" i've found "business agreement" profile but there I don't see buttons for adding custom fields..
    So, the question is: Where I can access Business agreement profile to enhance it with custom fields for replication with IS-U?
    3) CRM/IS-U data exchange functions:
    I tend to use tcode CRMC_BUT_CALL_FU:
    for CRM inbound event of BUAG object  - FM CRM_BUAG_MWX_PROCESS_EXT_STRUC..(as template).
    Question: Am I right that it fits my requirement to replicate custom fields from IS-U to CRM?
    Please tell me if you need more information..
    Looking forward to your answers.
    Thank you a lot in advance!
    Kind regards,
    Evgenia

    Hi Gobi,
    Thank you for advice. But:
    I've created fields not by using AET - I used documentation that Nicolas suggested me above.
    I've enhanced tables and structures that were mentioned there with my z-fields for both sides (CRM and ERP).
    Also I looked CRMC_BUT_CALL_FU for CRM Inbound BUAG_MAIN - corresponding standard FMs are marked for call.
    Any ideas?
    Thanks in advance.
    BR,
    Evgenia

  • Updating custom field in table EKKO within user exit when PO is saved

    I am trying to update a custom field in table EKKO when a PO is saved.  I am using FM EXIT_SAPMM06E_013, within enhancement MM06E005.  Since EKKO is not a table that can be updated with this user exit, I am using a technic that I read about on SDN where I assign a field symbol to the calling program variable and then am able to access data within EKKO table.  But when I pass this data back into the field symbol, for some reason this field is not getting saved when the PO is saved.  In debug mode, it looks like this field is getting updated, but when I look in the table after the PO is saved, it is not there.  My code sample is below.  What I am doing wrong?
    data:
      CHAR(50) VALUE '(SAPLMEPO)EKKO-ZHDRCSTCENTER',
      g_zhdrcstcenter like ekko-zhdrcstcenter,
      FIELD-SYMBOLS <F1> type any.
    if i_ekko-ekorg = '5401'.
      ASSIGN (char) to <F1>.
      g_zhdrcstcenter = <F1>.
      move '0000113322' to g_zhdrcstcenter.
      <F1> = g_zhdrcstcenter.
    endif.
    Thanks!
    Sarah Smyth.

    Firstly, have you investigated using EXIT_SAPMM06E_008 to set any custom fields you have added in the EKKO_CI / CI_EKKODB structure?.. that might work more easily.
    In terms of doing an assign back into a calling program's memory, it can work but it's probably worth setting a break point in your code then stepping through watching the values in EKKO - sometimes you can find subsequent code that re-writes an earlier copy of values back into the structure, thereby preventing you doing your change...  SAP does warn this method is for "internal use".  Also check in your debugger that it's SAPLMEPO and not SAPMM06E you need.

  • Adding custom fields to shopping cart in SRM 7.0

    Hi My dear Experts,
    I am having big doubt also a lot of confussion as per my understanding regarding adding custom fields to SC.
    I believe,
    i) It can be achieved by configuration in spro with respect to Meta data frame.
    i,e  Configure field control->configure control for fields on Header/Item level
    after that
    configure customer fields->Define cistomer fields on Header/Item level.
    ii) I also doubt fields can be added through Webdynpro enhancement of standard component.
    Pls clarify my doubt with little detail which is the best way to achieve my requirement ??
    Is Webdynpro Enhancement  really needed ??

    Hi ,
       Example for  Adding fields in SC accounting Tab ...follow the below example
    1. Add custom field ZZTESTACCT  in   structure   INCL_EEW_PD_ACC_CSF by  using  append structure.
    2. Spro ->Supplier Relationship Management u2192 SRM Server u2192 Cross application basic settings u2192 Extensions and field controls (personalization) u2192 Configure field control ->Configure Control for Fields of Substructures
    then click on  "Metadata for Fields of Substructures and Table-Like Enhancements"
    add the below entry
    Bus. Object Set Type  : 31
    Structure Field Name  : ZZTESTACCT
    Bus. Object Type       : BUS2121
    Set Level                    : Item
    Field Visible :  Check box should be checked
    Field Enable :  check box should be checked
    if you create the above entry then you can see ZZTESTACCT field in the accounting tab.
    Second point :
    WD_BADI_DOMODIFYVIEW  is a Badi you can implement this badi for the WD component and View to handle the UI elements.
    regards,
    Devi

  • Screen Exit for adding custom fields in Additional Data tab in ME21N

    I need a screen exit or whatever other method for adding custom fields to the additional data tab at header level.
    I also need a similar exit for adding a filed at item level.
    Thanks in advance
    Martin

    Hello,
    1st find badi or exit and then create screen ...and assign the screen group and screen no for that implementation....some steps i can give u i did with SPRO tcode....
    please check it for VA02
    SPRO u2013 SAP Reference IMG ---  Logistics General --- Basic partner u2013 customers -- Control u2013 Adaption of customers own masters data element u2013 prepare modification of customer free enhancement of customer master record
    1)Screen group                                  description
            zs                                           creating badi      --- (save)
           click on (label tab pages) u2013 new entries
           number u2013 10 , function code u2013 zs10 ,  description u2013 func ---(save) u2013(back)
    2)select (FM_CUSTOMER_ADD) u2013 copy
         Implementation name u2013 ZAS
         (desc u2013 impl for cust) u2013 (save)
        interfaceu2014(check_add_on_active) double click on it
    3)the above screen appear --  write the code in it u2013 (save) --- (activate) u2013 (back) u2013 (save)
         -- (activate) u2013 (back)
       Business adds in customer sub screens
    4)select (FM_CUSTOMER_ADD) u2013 copy
         Implementation name u2013 ZAS1
         (description -- cust) u2013 in attribute u2013 (give screen group name)
    5)go to interfaces (GET_TAXI_SCREEN)  double click on it
       (save)  --- (activate) 
    6)(SAVE)  -- 
        Goto SE38  -- CREATE PROGRAM WITH NAME (ZQW) type module pool
         Goto SE51  -- Prog : ZQW
           Screen : 200 (Create)
          Goto layout u2013 design the screen
    7)save u2013 activate
       then goto transaction : va02
    For User Exit's
    goto to tcode->status->program name->double click on that,
    then goto to-> attribute take the package name and
    Goto SMOD tcode ->Utilities->give the package name and F8
    then a list of exits will display for that tcode as well as that package.
    u can check the table MODSAP
    u can check the table MODACT
    For BADI's,
    1)goto to tcode SE24 give the CL_EXITHANDLER and display and then double click on the GET_INSTANCE
    keep Break point at this location 'call method cl_exithandler=>get_class_name_by_interface'
    then the tcode it will trigger there and we can debugg there we can find badi'for that tcode and then remove the break point.
    2)Goto to tcode->status->program name->double click on that program will display's
    then  press crtl+F then cl_exithandler
    Thank u ,
    santhosh

  • Adding custom fields to Embedded Search

    Hi All,
    I have read the post [here|How to add custom fields to Embedded Search; about adding custom fields to Embedded Search. I am looking to add Employee Subgroup for use in Talent Management (specifically the STVN SuccessionPlanning component) and wanted to know if anyone can expand on the instructions in the link to add this field.
    It appears to be part of the HRTMC_PERSON search object connector already and while I've done some IMG configuration the field is showing in SuccessionPlanning, but not displaying any data.
    Additionally, I'd be interested in any tips to add information that is not from PA0002 should it be required in the future.
    Many thanks,
    Luke

    Hi Luke,
    I am assuming here that your search request fields are based on HRTCM_CENTRALPERSON search template. To enable your search to work on employee subgroup please do the following
    1) Check if the HRTMC_PERSON Template extracts the data from Infotype 0001 via SPRO node 'Define Search Models and Change Pointer' Extraction Class is 'CL_HRTMC_SEARCH_READ_PA_INFTY'.
    2) Via ESH_COCKPIT, goto Template Modeler and select your custom Software Component and press Edit. Goto roadmap step 5 - Define Requests - where all search request fields are defined. Its using these fields Talent search works.
    3) Select the search request e.g. 'SAP_TALENT_NAKISA', it would then show list searchable attributes in below table. Using 'Add' button select path for PERSK so that it can searched.
    It would look like this once selected
    OBJID(REL_CP_P)->HRTMC_REL_CP_P_209.REL_CP_P(REL_CP)->HRTMC_PERSON.OBJID->HRTMC_PERSON.ORG_ASSIGNMENT
    4) In step SPRO 'Define Search Requests and Search Field Names' , define Employee subgroup field with AliasSearchField = PERSK since thats what is defined in roadmap step 5.
    Hope it helps!
    Regards,
    Ricky Shah

  • Adding custom fields  through SE51

    Hi All!
    This is with regards to adding custom fields through Se51 to standard screens.I had added custom field KNVV-ZZKVGR6 to the screen.
    After drawing the text and I/O buttons.When I activate I am getting an syntax error saying Field KNVV-ZZKVGR6 is defined differently in screen (ABAP/4 field,Dictionary field).
    What does this mean.
    Also if i activate with a SAP standard field instead of the custom it is getting activated.
    But for both the ways I could not able to see the output on the actual transaction.Also the new drawings which i am drawing are in brown color(different form the existing one)
    Please advise.
    regards
    Praneeth

    hi Praneeth,
    what is the program name,screen number you are trying to modify..,and after appending the field <b>ZZKVGR6 to KNVV</b> , now go to table and choose menu <b>Utilities->Data base Utility-></b> now click on  <b>Activate and Adjust the Data base</b>, then try to add the field.
    and are you adding the field from Dictionary (i.e you have option Get From Dictionary in that give KNVV table name it will list the fields, choose zzkvgr6 from it, and place it in your screen.)
    the exit which you are adding should be appropriate one
    or else you won't get the desired results. what is the exit..
    Regards
    vijay

  • BADI or User exit  for FB50 to update custom field in table COEP

    Hi all,
    i have added one custom field in table COEP through include CI_COBL .
    when i do posting through sales order(VA02) or purchase order(ME22n) that custom fields in COEP get updated with controlling document
    and through BADI AC_DOCUMENT i m updating that custom field in COEP.
    but when i do manual posting through FB50 controlling document is generated in COEP but i m not able to update that custom field
    because in this case BADI AC_DOCUMENT  is not get triggered.
    is there any BADI or User exit or enhancement spot for FB50 through which i can update that custom field in table COEP

    Hi Sandy,
    Thanks for u r reply,
    RFAVIS01 is not getting triggered through FB50
    and F180A001 ( EXIT_SAPLF048_001) is getting triggered but it doesnt contain COEP field in its parameter
    import - F180A_DOC_HEAD_TAB
                 F180A_DOC_ITEM_TAB
    changing - RELATION_TAB

Maybe you are looking for

  • Inter company stock transfer - OBYA

    Hi SAP folks, I have a small question on TC: OBYA We have 2 co codes (CC10 & CC20) and 2 GL accounts (110510 & 110520). Now i am doing inter company stock transfer from CC10 to CC20. Here, 110510 a/c is belongs to CC10 and 110520 a/c is belongs to CC

  • Park FI document...?

    How can we set BSTAT value to V in the BAPI BAPI_ACC_GL_POSTING_POST.. Thanks

  • Add third party SIP Phone to CCM 5

    'm not able to register this SIP Phone to the CCM5.0. I have device license that cater all IP Phone models.(LIC-CM-DL-100=) I got error message " Login Forbidden" "timeout" in the IP Phone. In the CCM, I got this message in Phone COnfig Window Regist

  • Elements 12.1 Organiser window on iMac

    The Elements 12.1 Organiser window on a new iMac(Mavericks) is only half the iMac screen. It stops half way down. It may be that this results from a failed attempt to stream a slide show (with RAW images) to a TV via Apple TV. How do I get the iMac t

  • Can't find movie rentals on my iPad

    We rented 6 movies through iTunes on my son's pc and they look like they are on his iPad when we look at it through the iTunes on his PC but when we go and look on the actual iPad, we can't see them anywhere. Am I missing something here? Marcus