Adding diffuse map on proe files surfaces

I tried to work with 3d toolkit to edit my proe files and I don't understand one thing:
why when I add in material a diffuse map and apply that to my surfaces I cannont visualize it. I can do it with reflection map, but not with diffuse. Is that a problem due to the proe format?
with rhino files this doesn't happen!
what about a manual that tells how the mapping and the material editing is working in 3d toolkit?
thanks,
Mariano

SharePoint doesn't quite work like that. You will need to move the documents into SharePoint. You can do this en-mass via WebDav (that is, going to \\sharepointsiteUrl from Start->Run) or via a migration tool, which will preserve all file metadata (created
by, created date, modified by, and so on), such as tools from Sharegate, Metalogix, Metavis, AvePoint, and others.
If you really want to "map" a file share to SharePoint, you need a 3rd party tool, such as AvePoint's SharePoint File Share Integrator. I'm sure there are other tools out there that perform a similar function.
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Similar Messages

  • I have all my music on my external hard drive when I try to add it to iTunes it is automatically added to my MacBook Pro's hard drive. How do I stop this from happening? I just want the music to stay on the external hard drive. Thanks!

    I have all my music on my external hard drive when I try to add it to iTunes it is automatically added to my MacBook Pro's hard drive. How do I stop this from happening? I just want the music to stay on the external hard drive. Thanks!

    This is true of course, but doesn't cover the situation where some files are in the iTunes Media folder and others are on an external drive. In my case I keep my music in the Media folder and all my films on an external drive (there are too many to have on the internal drive). In iTunes 11, and before, it was easy to add those external files by holding down the alt/opt key while dragging to the sidebar. In iTunes 12 this is no longer possible. There are several workarounds: use TuneSpan to move the file after it's been added; delete the file from the Media folder and empty the trash then use iTunes Get Info which will report the file is missing and allow you to locate it; constantly switch the Add to iTunes toggle on and off as required. All of these require a lot more work than just holding down the alt/opt key while adding.
    It constantly gets harder.

  • Here is A Fix for Axiom Pro control surface on Logic 9 on OSX10.10.2

    here's a fix 4 problems mapping Axiom Pro to Logic 9: paste these drivers into Applications/ Logic ...right click...choose Contents/Midi plugins folder:
    Axiom Pro.bundle
    Axiom.bundle
    If this cut and paste is non-functional ( after I click 'post')...you'll find them on the M-Audio support site...but be sure to select this newer pair of files they created on : 13/09/2011
    it will probably work all the way down to osx 10.7 and maybe 10.6.8 too.
    have a nice day.

    That is not for Apple to fix, check with M-Audio.

  • LP X 10.1 not working with MCU Pro control surface

    Since installing LPX 10.1 my MCU Pro (firmware version 4.0.2) no longer works with Logic.  Logic is still reporting the existence of a "Logic Control" in the control surfaces list, but doesn't send anything to or receive anything from the controller, and the controller itself remains completely unresponsive.
    I've read multiple reports of other MCU Pro owners having the same problem after installing 10.1.  Has anyone found a way around this, or do I just have to wait and hope that Apple will address it to restore the functionality of my studio?
    (I'm also running Yosemite 10.1 for an OS, BTW.)

    Thanks for the link, although I already knew about that thread.  The solutions listed therein did not help.
    However, I MAY have resolved my problem (although I guess only time will tell for certain).  I was running the next-to-latest firmware for the MCU Pro (4.0.2) and assumed that there was unlikely to be anything in the most recent 4.0.3 firmware that would help, since it still predated the release of 10.1.  However, I finally went looking for the 4.0.3 firmware this afternoon, and one of the items in the short list of updates was:
    "Fixed soft reset bug that could cause the MCU Pro or XT Pro to freeze when being reset by a DAW application."
    That sounded exactly like what I was seeing, even though I'd not seen it happen prior to installing LPX 10.1.  So I managed to get the MCU Pro firmware updated; Logic could send MIDI to it once the MCU Pro was in an update mode rather than trying to act as a control surface, fortunately.  After updating the firmware, selecting for the unit to act as a Logic Control again and then re-adding it to Logic's control surfaces setup, it once again seemed to lock up ... that is, until I then shut down and restarted both it and Logic Pro X.  At that point, it started working again (hallelujah!), and has continued to work normally through a couple of shutdown and restart cycles since.  So for now I am keeping my fingers crossed, and would recommend to any other MCU Pro owners that, if they aren't already running the latest firmware for their MCU Pro, to try doing that upgrade first before they despair.

  • How Do I Use DVD Studio Pro Files In iDVD?

    I had somebody create a DVD for me using DVD Studio Pro. (This was a compilation of many different videos.) It turned out great.
    I now want to make a DVD of one of those videos on my own using iDVD '08.
    I have the raw video/audio files. But, my problem is the raw files that were used for the DVD Studio Pro project are separated into one video file and one audio file. I don't know how I can get them both into iDVD. I was told that I have to recombine these two files into one file. But, how do I do this and still maintain the best quality?
    (I am not a video expert by any means, but I can tell you that the video file is a ".mpeg" and the audio file is an ".ac3". When looking at the .mpeg file in the finder it lists its Kind as "MPEG Movie" and when looking at the .ac3 file in the finder it lists its Kind as "Unix Executable File".)
    (I'm using iDVD 7.0.1 - I do have Quicktime Pro - I do not have the Quicktime MPEG-2 Playback component - I do not have DVD Studio Pro)
    Thanks in advance for your help!

    Q: How Do I Use DVD Studio Pro Files In iDVD?
    A: You don't, essentially.
    DVDSP is apple's top end app and it is intended to be used with FCP > Compressor > DVDSP. All of these are pro apps.
    i-Apps are consumer apps all of which are QT based. With that in mind ....
    now that doesn't mean you can't use FCP > iDvd. You can. But you have to do it in a way that iDvd will read all the files (meaning you must think in terms of QuickTime and export in this way). So when you export your QT File / Movie from FCP over to iDvd, it will look something like this hopefully regardless of the raw image & audio files you have already compiled which unfortunately will NOT work with i-Apps BUT will work with apple's pro apps which is the intended workflow / direction of said files in the first place.
    Btw ... if your QT movie has chapter markers then please use the following settings so iDvd can read these markers. (if on the other hand you were looking to export this file to DVDSP; then you would choose DVDSP Markers.
    Let me know if the above helps. If not, just come on back.

  • Finding whole mapping from database file - filesystems - logical volume manager - logical partitions

    Hello,
    Trying to make reverse engeneering of database files and their physical carriers on logical partitions ( fdisk ).
    And not able to make whole path from filesystem down to partitions with intermediate logical volumes.
    1. select from dba_data_files ...
    2. df -k
    to get the listing of filesystems
    3. vgdisplay
    4. lvdisplay
    5. cat /proc/partitions
    6. fdisk /dev/sda -l
       fdisk /dev/sdb -l
    Problem I have is that not able to determine which partitions are consisten in logical volumes. And then which logical volumens are consisted in filesystem.
    Thank you for hint or direction.

    Hello Wadhah,
    Before start the discussion let me explain I am newcommer to Oracle Linux. My genetic with dba experience of Oracle is from IBM UNIX ( AIX 6.1 ) and Oracle 11gr2.
    First task is to get the complete picture of one database on Oracle Linux for future maintenance tasks and make database more flexible and
    preparing for more intense work:
    -adding datafiles,
    -optimize/replace archive redolog files on separated filesystem from ORACLE_BASE
    - separating auditing log files from $ORACLE_BASE to own filesystem
    - separating diag directory on separated file system ( logging, tracing )
    - adding/enlarging TEMP ts
    - adding/enlarging undo
    - enlarging redo for higher transaction rate ( to reduce number of switched per time perceived in alert_SID.log )
    - adding online redo and control files mirrors
    So in this context try to inspect content of the disk space from the highest logical level in V$, DBA views down to fdisk partitions.
    The idea was to go in these steps:
    1. select paths of present online redo groups, datafiles, controlfiles, temp, undo
       from V$, dba views
    2. For the paths got from the step 1
       locate filesystems and for those filesystems inspect which are on logical volumens and which are directly on partitions.
    3. For all used logical volumes locate the logical partitions and their disks /dev/sda, /dev/sdb, ...

  • How to write the output of a mapping into a file (OWB10.2

    Hi
    I am using Oracle 10.2.0.1 version of OWB.
    the task is to write the output of a mapping into a File (Flat File).
    Please help me out!
    Regards
    Abi

    Hi,
    Create the file format thru OWB and mention the location in OWB. Deploy the file and it will be ready to use for target load. Make sure the connection to the target loc is available.
    Regards
    Bharadwaj Hari

  • After upgrading to Mountain Lion, I cannot open my File Maker Pro files. Can I use Numbers to open these files?

    After upgrading to Mountain Lion, I cannot open my File Maker Pro files. Can I use Numbers to open these files?

    Numbers is a spreadsheet program and FileMaker is a database program, so you probably can't use Numbers to open them unless you had first exported them from FileMaker in a spreadsheet-compatible format.
    If you upgraded from 10.6 Snow Leopard or earlier and your old copy of FileMaker won't open anymore, it might be a PowerPC application that is not compatible with 10.7 and later. If that is the case, to work with your FileMaker files you should upgrade your copy of FileMaker to the latest version, which seems to be FileMaker 12.

  • How do I import Map Info Tab files into Spatial for a map of europe?

    How do I import Map Info Tab files into Spatial for a map of europe via FME and have oracle spatial draw the map without problems?
    So far I've got to the stage where I can import the data, spatially index it (in oracle 9i) and get my SVG (scaleable vector graphics) application to view the map.
    The problem is that countries that have more than one polygon (more than one row in the database) do not draw properly.
    When I view the Map Info tab file in the FME viewer I can see that the data is fine, but I can also see that some of the polygons used to draw a country are donugts and some aren't.
    This seems to cause a problem when I import the data into oracle spatial as I don't know if a row in the table needs to be inserted as an independent SDO_GEOMETRY or if it should form part of a larger SDO_GEOMETRY (as in 2 or more rows make up the polygon shape for a country).
    I have a feeling that I'm not using FME correctly, because at the moment I have to import the tab file into Oracle then re-insert the data into a spatially formatted table (one with a spatial index) - I get the impression that FME should do that for me but as I'm new to this I don't really know.
    Any Help welcome :|
    Tim

    Tim,
    MapInfo has a free utility called EasyLoader that allows you to upload a table directly to Oracle. EasyLoader creates the geometries and spatial index. You can download it free from http://www.mapinfo.com/products/download.cfm?ProductID=1044
    Andy Greis
    CompuTech Inc.

  • ORA-29861 Error while editing or adding search keywords in a File Item

    Hi,
    We are getting the following error while editing or adding search keywords to a file item:
    ORA-29861: domain index is marked LOADING/FAILED/UNUSABLE
    DAD name: portal30 PROCEDURE : PORTAL30.wwv_edit_tab.edititem
    Can you please tell us what went wrong.
    Thanks

    Vikas,
    From the server error messages reference:
    Cause: An attempt has been made to access a domain index that is being built or is marked failed by an unsuccessful ODCIIndexCreate or is marked unusable by a DDL operation.
    Action: Wait if the specified index is marked LOADING Drop the specified index if it is marked FAILED Drop or rebuild the specified index if it is marked UNUSABLE.
    It's possible you were loading the document while the index was being rebuilt. Search all_indexes where DOMIDX_STATUS <> 'VALID' OR DOMIDX_OPSTATUS <> 'VALID' to find the offending index and rebuild it.
    Regards,
    Jerry
    null

  • I had a second hard drive added to my Mac Pro.  How do I format it and not effect my orginal hard drive?

    I had a second hard drive added to my Mac Pro.  How do I format it and not effect my orginal hard drive?

    Just format it with Disk Utility as mentioned above.  Select the new disk on the list at the left.  Click the erase tab.  Specify Mac OS Extended (Journaled) if not already specified and give the disk a name of your choice.  Then click the erase button.
    That's the simplest way to format a disk with a single partition (volum). If you want to create multiple volume (partitions) then click the Partition tab instead of Erase.  You can then use then specify a number of volumes and size each volume by specifying its size or just dragging the slider in the bootm right of each partition.  Give each a name as before and again Mac OS Extended (Journaled).  Click Apply button to create the partitions.
    Since you appear to be new at this just "play" with the erase and partition settings so you can become comfortable with them.  So long as you have the new disk selected on the left you can't really hurt anything since it's a new disk and no data to loose.  You can always go back and erase it back to a single partition.

  • Can Adobe Acrobat 8.0 read a Adobe Acrobat X Pro file?

    Can Adobe Acrobat 8.0 read a Adobe Acrobat X Pro file?

    Mostly. Are you having a problem, or just preparing?

  • Problems installing Adobe acrobat 6.0 Pro on Surface Pro

    I cannot complete the installation of Adobe acrobat 6.0 Pro on Surface Pro. The process stopped and the status bar is about 70%. I cannot close of cancel the process. It is stuck on my computer.

    Is it running Win 8 and is it 32 or 64 bit OS? AA 6 is not listed as compatible with Win8 and you may very likely have to buy AA XI. Sorry, but AA 6 is too old for an upgrade.

  • Text appearance in adobe acrobat (pro) files displays inconsistently unless you zoom in. Mainly 'i's and 'l's look bigger than they should.

    Text appearance in adobe acrobat (pro) files displays inconsistently unless you zoom in. Mainly 'i's and 'l's look bigger than they should.
    The pdfs print fine though.

    Try doing a spotlight search for all files that start with AdobeFnt. They will be named AdobefntXX.lst, with the XX being some number. They will be scattered across the drive... After making sure that all Adobe applications are closed, trash all the adobefntxx.lst files, those with the 3 letter extension .lst.
    Then, restart the system, and open the files in Acrobat again.
    Otherwise, what happens in Safe boot? (Remember, Safe boot loads only a default set of fonts.) If they display fine there, the problem most likely is a font issue, one of the fonts that Adobe installed.
    Check Adobe's web support page for troubleshooting Fonts.
    - or -
    Contact Adobe about the whole issue, it is after all, Adobe Acrobat... Adobe's contact number is 800 833 6687.

  • How do I erase a portion of a figure in an Acrobat X Pro file?

    I have a figure in an Acrobat X Pro file that I want to erase part of. The part I wish to retain is not retangular so Crop will not work easily. Is there a way to do it? If I were working in Paint, it would be easy to erase anything.

    tools/edit object
    right click on object and select edit (image or object)
    it should open it in the correct app (ps or Ai) edit and save. close and go back to Acrobat file.
    G

Maybe you are looking for

  • Camera raw update without using iPhoto or Aperture

    I use Adobe LightRoom 4.4 for my photo editing and therefore I do not need Aperture or iPhoto. However, I would also like to see the RAW thumbnails in my Finder windows from my Canon G15. Is there a way to update the Digital Camera Raw without having

  • How to use different default parameter value for different report subscriptions

    In ssrs is it possible to define different default parameter values for different subscriptions? In the following example I have a report which has two subscriptions with different start date and end date values: Report name – Testsubscription.rdl Su

  • Refreshing iTunes Shared Library

    I'm wondering if there's a way to refresh Shared Libraries in iTunes? When I import new songs onto one of my home computer's libraries, it can take days or weeks for its library to update on my other computers. Say, I import a new CD into computer A'

  • New window opens behind, etc.

    I'm running Safari 4.0.5. Several things are happening. I can't launch Safari directly from the dock. The Safari icon on the dock open a finder window with the Safari icon, from which I can launch Safari. After several minutes of inactivity, the addr

  • Problem calling deployed EJB

    I've deployed an ejb but i cant seem to access it, it throws me an exception that it couldnt find a xxxHomeHelper.class which should be in the generated jar file from the deployejb utility. I have the generated file in the classpath which is why i do