Adding functionality to standard SAP program

HI frnz,
Please let me know how to go about my problem....
The problem is as follows
Assumptions:
1.This enhancement will not allow end users to display Street data of employee vendors in XK03  and FK03 (Display Vendor). However it will not blank out change history (if any) related to these changed fields.
2.The Street address display restriction will not be role based.
3.This enhancement is not applicable to other standard transactions (i.e. other than XK03/FK03)  or custom programs where address information can be displayed by a user.
Purpose and Description:
There is a need by business to provide Vendor Master Display (XK03 and FK03) access to multiple users. However along with this access users will also be able to view Vendor employee (Account group Z002) House no/ Street address which is considered to be a sensitive information. There is thus a  need to restrict user's ability to view Vendor Employee House no/Street address information.  Current configurations relating to field status group does not allow to restrict this display access based on specific Account Group. This results in a need to have  an enhancement which hides the contents of the fields. This enhancement will blank out the contents from the field on the next screen.
All fields to be blanked in the Street Address.
Thanks is advance..

Hi,
I just wanna know a couple of things:
1. Does this limitation to display address of the vendors apply to all user? If not, what is the criteria that should be used to identify whether user A is allowed to display employee address while user B is not allowed?
2. Is there any user assigned to maintained employee vendor and if there any, should he/she be able to maintain address data? (XK02/FK02)
3. Is there any user assigned to create employee vendor and if there any, should he/she be able to create address data for employee vendor? (XK01/FK01)
If you have the answer for above question, then we can start to identify enhancement needed to fulfil your requirement.

Similar Messages

  • Info. / Doc. on Changes to Standard SAP Program, Tables, Fields in SAP 6.0

    We are in the process of upgrading our SAP from 4.6c to 6.0 and I am looking for a document or white paper that summarizes changes to Standard SAP Programs, Tables/Fields, Function Modules etc.. from what used to be in SAP 4.6c to what it is in SAP 6.0.  I am not sure if such a comprehensive document exists or is posted in the forum.
    Any help or information in this regard will be highly appreciated.
    Thanks
    ram

    Hi Ram,
    <<   We are in the process of doing our technical upgrade from SAP 4.6c to 6.0. I am looking for a white paper or documentation listing the changes made to the standard SAP Programs, Tables, Fields, Function Modules etc. from Rel. 4.6c to 6.0. >>
    Do you want to know what custom changes were done to SAP standard objects in your system or do you want to know what changes SAP did from 4.6c to ECC6.0.
    There is no white paper or documentation to find out custom changes made to SAP standard objects. but there were many tools in the market to find out and tell what changes were done to sap standard objects in your system.
    Your question seems ambiguous please clear it.
    Thanks,
    Kiran.

  • Changes in standard SAP programs

    Hello all,
    How could I track the changes made to standard SAP programs by a client? The system is 4.0B and some standard R/3 application's source code has been modified to provide some non-standard functionalities (that was, probably, the worst solution - in many of the cases they could have use user exits or enhancements for achieving the same purpose).
    In the table TRDIR (or, if you will, D010SINF) I can find the programs that were created by a set of users such as 'SAP' or 'SAP*' or 'DDIC' and were subsequently modified by client users (developers).
    Furthermore, finding the development class of those programs (function module 'RS_PROGRAM_GET_DEVCLASS') gives me a better idea about what applications were really modified by the client.
    Still, many of these programs that appear to have been created by 'SAP' or 'SAP*' and modified by other (client) users were <b>generated</b> as a consequence of <i>configuration changes</i> made by those client users, and therefore are not changes made to SAP R/3 standard.
    Is there a way to track only those standard programs that were indeed modified by the client, at source code level?
    Thank you,
    Bogdan

    Hi Bogdan,
    you can program your own tool-abap:
    1) select table <b>E070</b> ( TRFUNCTION = 'R' )
    2) -> for all entries select V_<b>E071EU</b>
          (TRKORR = e070-TRKORR)
    3)-> list all found objects:
      -V_E071EU-PGMID
      -V_E071EU-OBJECT
      -V_E071EU-OBJ_NAME
    and create an interactive list (e.g. for SE11 and SE38)
    hope this helps
    Andreas

  • How to find CUSTOMER EXIT for a Standard SAP program

    How to find CUSTOMER EXIT for a Standard SAP program

    Hi
    To introduce the techniques of enhancement in standard SAP system. SAP creates customer exits for specific programs, screens, and menus within standard R/3 applications. These exits do not contain any functionality. Instead, the customer exits act as hooks. You can hang your own add-on functionality onto these hooks.
    They do not affect standard SAP source code.
    When you add new functionality to your SAP System using SAP’s exits, you do not alter the source code of standard SAP programs in any way. The code and screens you create are encapsulated as separate objects. These customer objects are linked to standard applications, but exist separately from SAP’s standard software package.
    They do not affect software updates.
    When you add new functionality to your SAP System using SAP’s exits, your objects (called customer objects) must adhere to strict naming conventions. When it comes time to upgrade a to a new software release, customer objects’ names ensure that they will not be affected by any changes or new additions to the standard software package.
    Customer exits are not available for all programs and screens found in the SAP System.
    Any change made to an SAP object in a customer system is called a modification. Customers usually modify their systems for one of two reasons. Either they make changes to the SAP standard in order to adjust the R/3 System to their specific business needs (actual modifications), or they alter individual SAP objects in order to correct an error (as recommended in an SAP error note).
    You should only modify the SAP standard if the modifications you want to make are absolutely necessary for optimizing work flow in your company. Be aware that good background knowledge of application structure and flow are important prerequisites for deciding what kind of modifications to make and how these modifications should be designed.
    SAP application programmers create SAP enhancements in transaction SMOD using function module exits, menu exits, and screen exits.
    Customers are given a catalog containing an overview of existing SAP enhancements. They can then combine the SAP enhancements they want into an enhancement project using transaction CMOD.
    SAP enhancements are made up of component parts. These components include function module exits, menu exits, and screen exits. A specific component may be used only once in a single SAP enhancement (this guarantees the uniqueness of SAP enhancements).
    Customer enhancement projects consist of SAP enhancements. Each individual SAP enhancement may be used only once in a single customer enhancement program (this guarantees the uniqueness of a customer project).
    SAP application programmers preplan function module exits, menu exits, and screen exits for their applications and combine them to create useful enhancements for the R/3 System.
    Customers create their own enhancement projects for their systems using SAP enhancements. You can customize the individual components of an enhancement project by creating your own include programs (for function module exits), texts (for menu exits), and subscreens (for screen exits).

  • Z search field in standard sap program

    Hi,
    I would like to ask if Z search field can be created in the standard SAP program.
    Basically I need modify the search field used when searching for Business area in creation of asset master data (tr. AS01).
    It shows the list of table tgsbt.  But I would like to exclude by default some rows of the table and also would like to sort it in different way (by text).
    Is that possible, if so, could anyone give me a hint how to do that?
    Many thanks,
    Honza

    Hi Jan,
    Please go thorugh the below link.
    http://wiki.sdn.sap.com/wiki/display/Snippets/ImplementingSearchHelp+Exits

  • How to uncomment code in Standard SAP Programs

    Hi Experts,
    how to uncomment entire code  of standard SAP programs  which is commented .
    Standard SAP Program is fully commented,i have to uncomment it ,to work it as normal.
    i saw that some lines * / * like  this are there in the commented code .
    what is the way to un comment this ?
    Thanks in advance,
    Regards,
    Hitu

    Well, if it is commented by your company - This doesnt ask for access key but if it is commented by SAP and you want to uncomment, you need access key.
    You can ask basis guys to get access key for the object. you need to provide the program name and other information.
    Other information: - go to the GOTO on application tool bar and select object direct entry.... you need to provide the full object key.
    To uncomment the code - select the lines and right click - uncomment . This can only be done in editable mode.

  • How to change standard SAP program SAPLFSKB to add custom fields...?

    Hi Gurus,
    I have to change the standard SAP program SAPLFSKB screen 100 to add custom fields...i looked into OSS notes and there is a note: 174413 that provides steps to add custom fields...but when i try to do this it doesnt let me do it...it says that request cannot be changed....do i have to use modification agent...if that is the case then how shud i proceed with this....so please provide me some inputs....
    your help will be appreciated...
    Any inputs for me....
    cheers:sam
    Message was edited by:
            Sam williams

    try going into edit->enhancement operations->create.  this will allow up to add your customized field.

  • How to change the field length in standard sap program.

    Hi All,
    How to change the field length in standard sap program.
    Urgent
    Example:
    Text1 type c length 75,
    To change :
    Text1 type c length 150,
    Point will be rewarded..
    Thank you,
    Vikram.C

    If the only solution is to change the sap standard program, simply change the program, it will prompt for an access key. This key can be retrieved in the SAP support portal (service.sap.com) at keys and requests, sccr keys, register object.
    Sometimes these actions are outsourced to a competence center, so maybe youre not entitled to do this, in any case ask a resident senior developer for support.
    regards, Rob

  • FTP option in standard SAP programs

    Hi,
    Do standard SAP programs provide FTP option and if yes, is selection screen the only option of finding the FTP option.
    Regards,
    Vijay

    I don't get your requirement - pls post more details
    A.

  • Standard SAP Program to clear IDocs

    Hi all,
    IDocs transfer takes place between 2 of our R/3 systems.
    But due to network issues, many IDocs get stuck and we have to manually clear them.
    I want to know if there is any standard SAP Program to clear the IDocs, so that the program can be scheduled daily and thus the whole process can be automated.
    Sid

    Hi,
    The IDocs can be processed directly (by selecting the Idoc and clicking on 'Process' button).
    But my requirement is that I want to automate this process by a standard SAP program scheduled daily.
    Also the note 40088 was not of much use as it talks about archiving the IDocs.
    Sid

  • How do we find tables for standard SAP programs?

    Dear Friends!
    I have received a project in which I have to create a report on the employees skill-sets(qualifications). Qualifications we can see in in the Transaction PA30 in the form of infotypes. But infotype tables are not sufficient itself. So do you guys have any idea that where else do we maintain records like this moreover how do we find tables in standard SAP Programs.
    Please reply!!

    Whats up Guys...??
    Gave up??
    I have found a table for position but not really for Qualifications.. (Not in terms of Infotypes..)
    Tables ARE
    HRPY_WPBP
    -  PERNR
    -  PLANS
    T528T
    -  PLANS
    -  PLSTX
    See if you guys can do something more about it.

  • Z TCode for Standard SAP Program

    Hi all,
    Is it allowed by default (by SAP standard rule) to create a Z TCode for the existing standard SAP program? By doing this, I will have two transaction codes for one standard SAP program. One is the existing SAP standard TCode and the other one is the Z (custom) TCode. Both point to the same SAP standard program.
    I tried to copy TCode ME22 to ZME22 but I get error message "Transaction code ZME22 not defined" when I tried run it. ZME22 was successfully created (no error) with the same setting as ME22 during copying.
    Thanks in advance.
    Regards,
    Goh Tiam Tjai

    Goh,
    yes obvoiusly you can create another t-code.
    as i want to add more thing which all were missed is that you have to create parameter transaction from se93.
    and give default transaction as me22 in your case.
    hope now your problem has been resolved.
    please mark all good answer.
    Amit.

  • Adding field in standard SAP transaction output results.

    Hi,
    I have to add a new field in standard SAP transaction output results.
    Can any one tell me what are the ways (brief explanation) that I can do this?
    If using exists - then what kind of exists I have to use? And how to find out the possibility with user exists?
    Thanks for your time.
    Thanks.
    Chris.

    Hi,
        There are so many ways to find out the user exits.
    Hi,
    To see SAP Exits -> Use Tcode SMOD
    To See create a project for Customer Exits -> Use Tcode CMOD
    There are projects to which Exits are assigned. Selects the relevant projects.
    What is User Exit:
    http://www.sap-img.com/abap/what-is-user-exits.htm
    How to find then:
    http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
    All Exits List:
    http://www.easymarketplace.de/userexit.php
    Do a search on SAP Exits, Customer Exits, enhancements, etc
    Step 1 :- Execute transaction
    step 2 :- Click on Status Menu
    step 3 :- Double click on the program (screen) __?????___
    Step 4 :- Search source code for the 'Customer-Function' string using the find button. Remember to select 'In main program'.
    Step 5 :- A list of search results should be displayed indicating where all function exits can be found.
    You can now double click on each of them to go to its position in the source code. This also
    allows for the insertion of breakpoints so that you can test if the exits are called in the
    appropriate place.
    Step 6 :-Once you have found the Function Exit within the source code (Find Function Exit) you need to
    access the actual function module it executes. This is done using the following steps:
    Step 6.1 :-
    Step 1
    Locate desired 'Call Customer-function' statement within source code.
    Step 2
    If code is not within main program (module pool) e.g. SAP* then you will need to find this
    out by selecting 'Main Program' from the 'GOTO' menu. The Main program for transaction
    Step 3
    The actual function module name can now be calculated based on the information retrieved,
    it is defined by the following format:
    EXIT_<Program name>_<Exit number>
    eg :- 'EXIT_SAPLMR1M_004'.
    Step 7.1:-
    Once you have found the Exit function module
    Step 1
    Execute transaction CMOD
    Step 2
    Select 'SAP Enhancements' from the 'Utilities' menu.
    Step 3
    Select 'All selections' from the 'Edit' menu.
    Step 4
    Now populate the Component name field with the exit function module and press
    the execute button.
    Step 5
    A list of all Exits(Enhancements) containing that function module should now be displayed.
    Step 5
    You can now double click on the desired exit to display a detailed description of its uses and a list of all
    components contained in it.
    Implementing Function Exit
    This is required in-order to activate Function exit:
    Step 1
    The first step is to enter source code into function module in the usual way i.e. via SE37.
    There will already be an include declaration within the code with the following
    format: Include zx*.
    Double click on this to create it, source code can then be entered within here.
    Although it is good practice to create another include with this to store your
    code, this allows separation of difference enhancements allowing them to be easlity
    removed without de-activating the enhancement.
    Step 2
    Execute transaction CMOD and create new Enhancement. Enter name and press the create
    Button.
    Step 3
    The following screen should be displayed, enter short text then click on the 'Enhancement
    Step 4
    Now enter the Exit name (enhancement) which contains the desired Function Exit.
    Step 5
    Return to initial screen of CMOD and press the activate icon. The exit is now ready for use.
    Please Mark The Helfull Answers & close the thread.
    regards
    dj
    reward for all useful answers.

  • Dynamic Selections in Standard SAP program

    There is an Icon which enables dynamic selection in the Standard SAP Transaction 'FBL3N'. How can I add or fields from this dynamic selection?
    Any help would be appeciated.
    Thanks,
    ALAM.

    Hi ,
    it all need upon requrement..
    if any extra paramaters need to add to input or output ---check for Badi or User-exits and add functionality.
    if no enhacements found try to create a copy of standard program and create z Program and add own code..
    Always better to create custom program for rather manually doing code changes to standard program..
    Prabhudas

  • Standard SAP program to generate email invoices ?

    Hello,
    Is there is any standard SAP SD program which can analyse the accounts recevables, and generate many invoices for many customers with a single run ? The program would then recognize the customer e-mail adress and send an e-mail with the invoice in attachment.
    I think that the SAP FSCM application can do that, but what about SD ?

    Hi,
    I am not sure whether this will really meets your requirement.
    But trying to suggest you with following way:
    could you just check the NACE->V3->MAIL option.
    Though this we can send the Invoice details through mail to respective Payee or Customer.
    And through VF31 we can send mail for multiple Invoices.
    Thank You,
    RB.

Maybe you are looking for