Adding more RAM....

Hey,
i have a macbook 2GHz White, it has the standard 512mb of RAM, when i look under the Memory section of System Profiler it states that i have 2 x 256mb, one in each bank, if i wanted to add more (another 512mb) is there another port (or bank whatever!) for me to put it?

Actually you have to swap the 256 and replace it with a larger module:
http://www.apple.com/macbook/specs.html
It says two SODIMMs. And this article shows that both are user accessible:
http://docs.info.apple.com/article.html?artnum=303721
I'd keep the old module(s) in the static protective sleeve (or their own static protective sleeve) that the new module(s) come in, just in case you have to put it back in.

Similar Messages

  • Adding more RAM to Tiger

    My ibook has 512MB's of RAM. I am happy with this. However since next year I plan to return to school to get a Masters in Ministry, I may need more RAM. From 2001-2005 while I working on my undergrad I used a Performa 6360 which had 136MB's of RAM + RAM Doubler. I was able to run some 20 apps at one time (or more) without a major slowdown. I cannot do this with Tiger, and since I plan to get the OSX version of Dave to access other PC's on the network (since whatever is built int OSX pales in comparison to Dave). On my Performa 6360 Dave was a necessity, since the campus dumped using Macs in 2002. I remember my 1st year (2001-2002) I could access a number of Macs on the Appletalk network at the time. But after the Fall 2002 semester the mac got dumped. Some students still used Macs, but fewer and fewer used them in the 2003-2005 years.
    So my question is. Will maxing out my ibook to a gig of RAM although me to run some 20-30m apps at one time (like I could on the Performa) or was OSX Tiger just not designed for this?
    OSX Tiger is much better than OS 9.1, but not in all areas as OS 9.x and before do have their advantages over Tiger.
    Thanks,
    John

    My ibook has 512MB's of RAM. I am happy with this.
    However since next year I plan to return to school to
    get a Masters in Ministry, I may need more RAM. From
    2001-2005 while I working on my undergrad I used a
    Performa 6360 which had 136MB's of RAM + RAM Doubler.
    I was able to run some 20 apps at one time (or more)
    without a major slowdown. I cannot do this with
    Tiger, and since I plan to get the OSX version of
    Dave to access other PC's on the network (since
    whatever is built int OSX pales in comparison to
    Dave). On my Performa 6360 Dave was a necessity,
    since the campus dumped using Macs in 2002. I
    remember my 1st year (2001-2002) I could access a
    number of Macs on the Appletalk network at the time.
    But after the Fall 2002 semester the mac got dumped.
    Some students still used Macs, but fewer and fewer
    used them in the 2003-2005 years.
    So my question is. Will maxing out my ibook to a gig
    of RAM although me to run some 20-30m apps at one
    time (like I could on the Performa) or was OSX Tiger
    just not designed for this?
    OSX Tiger is much better than OS 9.1, but not in all
    areas as OS 9.x and before do have their advantages
    over Tiger.
    Actually, OS 9 does not have any advantage over OS X. You had 136 MB of ram plus RamDoubler, why do you think 512 MB of ram will be less adequate?
    RamDoubler merely did what OS X does as part of how it works. It did not give you more ram it just allocated more to the app up front while dropping background apps as low as possible. This is what OS X does.
    If you were running 20 - 30 apps with 136 MB of ram then they weren't ram hogs at all and it's very likely you can run them without adding more ram now.
    OS X handles virtual memory much better too. In the old days I could run 2-3 apps at a time, now I can run 10-12, and most of mine are major ram hogs like Photoshop.
    Kevin

  • Adding more RAM to Macbook Pro mid-2012

    Hi!
    I have a question about adding more RAM to my mid-2012 MacBook Pro (without Retina). I've been doing some video editing with Final Cut, and I'm using quite many apps on the daily basis. I have the standard configuration with 4GB of RAM (2x 2GB) but I guess I should upgrade it, shouldn't I?
    I had that idea in mind: buying extra 8GB RAM instead of one 2GB, so I'll end up with 10GB of RAM. If it won't be enough and I'll have some extra money, I will add another 8GB instead of 2GB, so I'll have 16GB.
    First question - is it worth it?
    Second question - can I add any RAMs supported by Macs? For example I'll leave one 2GB that I have already, and add 8GB made by, let's say, Kingston (I guess they are supported and they have good price in my country). Will this work fine? Does it make sense?

    Jerroslaw,
    since you’re running Mavericks, open up Activity Monitor while you’ve got your usual selection of apps running, select its Memory tab, and look at the Swap Used setting in the lower left. If it’s displaying “0 bytes” as the amount of swap used, then extra RAM won’t make a difference. Otherwise, to answer your first question, whether it’s worth it or not depends upon how frustrated you are running your usual selection of apps with 4 GB of RAM. It might be that the cost of replacement RAM modules outweighs your level of frustration — only you can make that determination of worth. I would recommend that if you do choose to purchase replacement RAM, that you get a pair of matching modules — either 2 × 4 GB = 8 GB, or 2 × 8 GB = 16 GB, to replace the pair that is currently installed.
    For your second question, you don’t have to use Apple-brand RAM, but you do have to use RAM with the same characteristics as your factory-installed RAM uses. Any worthwhile purveyor of RAM for Macs will let you easily locate modules that are compatible with your Mid 2012 MacBook Pro.

  • Will adding more RAM to my Power Mac G5 make a difference?

    I have a Power Mac G5 (Late 2005) with 1 GB of RAM, which is how I ordered it. Sometimes when I am viewing large (large viewing size) video files with Quicktime, the video files get a little choppy from time to time, especially when I have many other applications open. Will adding more RAM fix this or is it not really necessary? Also, does Leopard improve this problem? I am currently using Tiger.

    Hey Tim
    I'm definitely not an expert - but more Ram makes a huge difference. I'm not sure if more Ram will specifically solve your Quicktime issues or whether upgrading your graphic card is really the answer. Those more knowledgeable should jump in here. Buying Ram from 3rd parties, like OWC (making sure you do have the right compatible Ram), will improve your performance immediately. I noticed the difference when maximizing the RAm on my G4. It cannot hurt. 4GB of Ram for my G5 cost less than $200. I think Ram is the biggest bang for the buck.
    Do you really need to get Leopard? The performance of Tiger on the G5 for me is solid. Seems like Tiger is optimized at this point for the G5 processor chips. Why muck around with all the potential problems you read about on these forums. Check out the Adobe forum and hear some of their nightmare stories. Who has this amount of time to waste on fixing what shouldn't need fixing in the first place. Just a thought - hope I'm not out of line for chiming in on this.
    Since your model can take 8GB of Ram, indulge yourself and maybe buy another 4GB of matched Ram and if it doesn't solve your Quicktime issues, I'll bet it will make you happy with everything else.
    Mike

  • Will adding more RAM reduce system overloads?

    I'm running Logic Express 8 on a mac mini (core 2 duo) with 2GB or ram. I was thinking of adding more RAM (4 or 8GB). I tend to see "system overload" errors often. Generally, rebooting seems to fix the issues. Do you think adding more RAM would make any difference? Generally I have maybe 15-20 tracks.
    Thanks

    No, unless the overload has to do with RAM, which it ususally hasn't.
    Nevertheless, adding RAM is a very good idea to help instruments with high RAM requirements like EXS24.
    To reduce system overload:
    - let Logic be the only open application
    - if necessary, raise the audio buffer in the preferences to the next higher value.
    - while playing back, have an empty audio track (or the master track) selected.
    Fox

  • Will adding more Ram  help?

    My iMac is 2010. Over the last 3 - 4 months its started to slow down a bit. I  realize sometimes thats just the way things are but I am wondering if there is anything I can do to help. It seems that everything is a bit slow on startup/wakeup. It takes about 5-10 seconds for things to get rolling, that doesn't bother me that much, I can handle it, just pointing out that is different from 3-4 months ago. Once things get rolling its fine.
    iPhoto on occasion slows down, but again for the most part its ok. It's iMovie that really seems to lag. I realize of the things I am using iMovie is probably the most "powerful" program I am using , dealing with all the video files, but it has become very tedious to use. I've tried to "clean up" things a bit and that doesn't seem to really be helping. I am wondering if adding more RAM would help. Currently I have 4 slots filled with 2 GB of Ram. I think thinking of upgrading 2 of those to 4GB.
    I guess I am wondering if that would make a difference? I know in theory adding more "juice" will make things run faster but for the most part the computer does run ok on its own, its iMovie that lags. It it simplky because its a more powerful program and adding more juice will help. Or do we think something else is going on?
    OS X Version 10.9.1
    3.06 Ghs Intel Core i3
    8 GB 1333 MHz DDR3
    229 GB of 500GB avaliable storage space on the harddrive.
    Any thoughts?

    When you have the problem, note the exact time: hour, minute, second.
    If you have more than one user account, these instructions must be carried out as an administrator.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above. Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first. Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
    The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. In most cases, a few dozen lines are more than enough. It is never necessary or helpful to post more than about 100 lines. "The more, the better" is not the rule here.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

  • Adding more RAM to Lenovo ThinkPad S430

    Hey guys
    I've read the guide on how to add more RAM to my laptop (http://support.lenovo.com/en_US/downloads/detail.page?DocID=PD024449), but I still got a question.
    Do I have to remove the battery before adding the memory, or is it enough to just have the laptop turn off. This is the first time I'm doing this so I want it all to be perfectly safe for my system.
    Cheers.
    Øyvind

    there is an option to disconnect the battery within the bios menu, this would allow you to do once off RAM upgrade. It automatically resets the battery to reconnect after you restart the laptop.
    Regards,
    Jin Li
    May this year, be the year of 'DO'!
    I am a volunteer, and not a paid staff of Lenovo or Microsoft

  • HELP: Question on adding more RAM to my 2X dual core 2.66  Xenon  MacPro

    Hi,m
    I current;y have 6GB of RAM in my MacPro and want to add a bit more.
    Right now I have 4 X 512MB strips and 4 1GB strips for a total of 6GB
    I was thinking of adding 2 X 2GB strips to replace 2 of my 512MB strips which would give me 4 1GB strips, 2 2GB strips and 2 512MB strips filling all slots on both risers.
    What is the proper order in which to place the memory strips? 2GB strips in slots A&B on the top riser and the rest paired wherever... or is there a specific order these need to be in?
    Should I remove the 2 remaining 512MB strips altogether and leave 2 empty slots?
    I have heard that adding more memory improperly can in some cases actually slow things down.
    My MacPro is running the 32BIT EFI... but should be able to address all RAM up to 4GB per core. ( 12GB total)

    2006: symmetrical quad sets are ideal.
    4 x 2GB + 4 x 1GB / even 4 x 4GB
    The bad config is 6 DIMMs, yes.
    More than 4 DIMMs = higher latency
    There is no "per core." You can have up to 32GB (8 x 4GB).
    WHY do you want more and what will this do for you?
    Are you using CS3 or later? then yes 6GB is minimal.
    Do you show page outs and swap files being used?
    Where I recommend checking, and there are install guides and video:
    http://eshop.macsales.com/shop/memory/Mac-Pro-Memory#667-memory
    http://support.apple.com/kb/TS1957

  • Adding more RAM video tutorial?

    Not long ago I added another hard drive to my Mac Pro and to do it I reviewed a Quicktime video that offered step by step instructions. It worked great. I found it somewhere on the web but I don't know or remember where.
    Now I want to add more RAM and it has arrived from Crucial but their online picture instructions appear to be for the older PPC machines and not the newer Intel Macs.
    I'd like to try and find a video that would show me where to find the RAM on my Mac Pro and how to install it.
    Does anyone know where I might find a quick video tutorial?
    John

    Okay, additional 2 gigs are installed. Tell me if this is the correct setup:
    DIMM Riser A/DIMM 1 1GB DDR2 FB-DIM 667MHz OK
    DIMM Riser A/DIMM 2 1GB DDR2 FB-DIM 667MHz OK
    DIMM Riser A/DIMM 3 512MB DDR2 FB-DIM 667MHz OK
    DIMM Riser A/DIMM 4 512MB DDR2 FB-DIM 667MHz OK
    DIMM Riser B/DIMM 1 512MB DDR2 FB-DIM 667MHz OK
    DIMM Riser B/DIMM 2 512MB DDR2 FB-DIM 667MHz OK
    DIMM Riser B/DIMM 3 Empty Empty Empty Empty
    DIMM Riser B/DIMM 4 Empty Empty Empty Empty
    If so - if I buy two more 1GB sticks do I shift the 512 from A/3 and A/4 and move to B/3 and B/4 then place 1GB each in A/3 and A/4?
    Thanks,
    John

  • After Effects CC 12.1 Adding more Ram

    Sorry, I've searched for this answer and haven't found anything about AE CC v12 and Ram, plenty on Ram, just not AE CC v12, actually v12.1 now.
    My question, is it better to have fewer slots of Ram with larger sticks, or more slots of ram with smaller sticks ?  Basically I want to add more ram to my system but not sure which of those is better, if any?
    I'm running a HP Z820 w/32 processors (hyperthread of course), nvidia k5000 & 32GB Ram.   I wanted to throw some more Ram into the system, maybe 64GB but wasn't sure it I should just add more to the 16 slots I have available or replace the sticks I have with larger ones ? OR maybe it's a waste of time/money.  The way capitol works here, i use it or lose it and not sure when the bank will be open again if ya know what i mean.
    thanks for any adivce and for answering my Ram question, much appreicated.
    Running windows 7 professional, Adobe Creative Cloud, C4D R15, maya, etc.

    Fewer is (slightly) better generally as long as the config is optimized. On a dual CPU Z820, 64GB (8x 8GB ECC reg) is also a good setup along with the 128GB one Eric suggested.
    Also see no problem with just adding another 32GB (8x 4GB) as long as they're matched for type (all registered or unbuffered but not mixed).

  • If my peak "physical memory" usage is around 50%, is adding more RAM a waste of money?

    I have a W700-DS with the T9600 dual-core and an SSD, and when running 4GB of RAM I'd notice that memory usage tended to rarely exceed 50%. Just for the heck of it, I just upgraded to 8GB of RAM, and now I'm curious as to whether I wasted my money, as the 4GB usage never hit 100%. One thing I did notice is that my "Windows Experience Index" went from 5.9 to 6.4, but I'm guessing maybe that's just marketing BS from Microsoft.
    Thanks for your opinions.

    If you haven't checked it out already, take a look at what the Resource Monitor tells you. I'm "using" only abpit 3GB out of 12 right now, but 9GB is marked "standby" -- memory filled by SuperFetch with items I'm most likely to need. The memory is still availalbe for something else if Windows/SuperFetch guessed wrong, but if it guessed right, it's already there and ready to go. Thus the boost to your Experience Index isn't total BS. You may actually be find your system more responsive. For example, if you always start your morning reading email, then check a website, then finally open your primary work applications, having more RAM allows SuperFetch to predictively load more of this while you're doing something else.
    Interstingly, as I was typing this, my In Use dropped to 2.7G, Standby has filled the remainign 9.3G and free is down to 0 (Hardware Reserved is a negligible 113MB).
    You don't mention exactly what OS you're using, but I'm going to presume Windows 7 x64... with a 32-bit OS, you definitely would have been wasting your money with its nominal 3GB limit. SuperFetch wasn't quite as good with Vista, but there would still be some benefit there, I think. I have no experience with XP x64.

  • Adding more RAM to iBook

    How do I add more RAM to an iBook?

    cowboyjunction, Welcome to the discussion area!
    Basically the RAM goes under the keyboard. The exact instructions depend on the exact iBook G4 you have.
    Apple do-it-yourself instructions for iBook G4 and iBook G4 (Early 2004) models.
    Apple do-it-yourself instructions for iBook G4 (Late 2004).
    Direct PDF link to Apple do-it-yourself instructions for iBook G4 (Mid 2005).
    iFixit iBook Repair guides

  • Adding more RAM to my MacBook Pro

    I have a MacBook Pro 2.4 GHz with 2 GB 667 MHz DDR2 SDRAM and need to add more ram. can i, and if so, what kind should i get? what's the most I can add? recommend any non-apple brands like kingston? (since it'd be cheaper and i can have a friend install it)
    thanks!

    Yes you can, up to 4 GB, you can also use Kingston, Crucial (which I've used on two notebooks and my MacPro and PowerMacs, OWC, etc.
    http://www.crucial.com/
    Message was edited by: deggie

  • Adding more Ram DV6815NR. HELP!!!

    Hey all,
    I have an HP DV 6815NR laptop and wanted to add in more ram. It came with 2 sticks, one is a 1 gig, the other is a 2 gig, total of 3 gigs. I have an identical laptop, same model # that died, no picture comes up on the screen so I thought I woulld take advantage. It says I can put in up to 4 gigs, but it states something about a 32 bit operating system it may not use up to 1 gig. Well, I removed the 1 gig stick from my good laptop and replaced it with a 2 gig stick from the dead one. I read all the instructiions and it is not the first time I have replaced/upgraded ram.
    I put back the battery and power cord and stated it up. It seemed to go fine. I checked and it now shows 4 gigs instead of 3. As I started to do some stuff on the laptop to test it, it seems to keep shutting down and restarting itself. I get messages that windows has shut down and I start it back up in normal mode.
    I am running windows vista. I do have a 32 bit operating system. I am afraid to continue. It will run good for a few things, checking email, searching web sites, then it shuts down and restarts and all seems good again.
    Should I put back in the 1 gig stick? Thanks so much for your time!!!
    Brian

    I would go into the BIOS (F10 as you power up) and run the hard drive self-test on the newer laptop. With shutdowns like that a good part of the time it is hard drive or memory issues. Also I hate to bring it up but the dv6000 series in general has a higher than average hardware failure rate. The two memory sticks (2 gigs) you describe should work together. You might try just the 1 gig stick that is in the older laptop now in both laptops and see what happens. This will test whether the original 2 gig stick in the newer laptop might be having issues. if you are up for trying some more powerful tech solutions I can link you to a download of a good memory testing program but you will have to know how to download an .iso and burn a bootable cd rom and use it.

  • Does adding more Ram help with the speed of Compressor

    At my office, we are having to dump out a 300k qt 7 project that is an hour long. It takes currently 2 1/2 hours to render out. Can this process speed up a degree with more ram?
    Currently we have 8 gigs.. and we can make out to 16 gigs.

    I don't think so. I believe Compressor is cpu/disk io dependent. I think you have enough memory. Depending on what you're encoding to, you may be able to speed things up if your machine has multiple cpu's.

  • Will adding more RAM breaks the warranty?

    Hello there!
    Actually i bought new Toshiba laptop, and I added 2 GB tothe RAM..would that break the warranty?

    Hello
    More about death pixels you can find here:
    What is the maximum permissible number and type of pixel fault that your Toshiba LCD monitor can exhibit per 1 million pixels?
    LCD displays - Information on screen technology and pixel failure tolerance
    Bye

Maybe you are looking for