Adding new search fields in BP search of IC webclient

Hi ,
I am new in BSP and IC Webclient. Can anyone give me suggetion about how to add new fields in BP search in IC webclient and incorporate the new fields in the search process ?
Thanks in advance.
Pratip

Use the transaction EEWB for modifying the search structure.

Similar Messages

  • Impact of adding new value fields in ongoing operating concern.

    Hi All,
    Want to know the steps of adding new value fields in the existing operating concern in COPA?
    What is the overall impact of addition of New Value fields in the running Operating Concern?
    How do we test the addition of new value fields?
    Is the addition of New Value fields to the running Operating Concern advisable?
    Your support and advice is highly anticipated and appreciated.
    Thanks & Regards
    9819528669

    HI,
    please search in SCN forum before you post:
    Re: Adding a ValueField to an existing Operating Concern?
    Best regards, Christian

  • Maintaining operating concern after adding new value field

    Hello,
    I added a new value field to our live operating concern,maintained the data structure throguh KEA0(Maintain operating concern).The changes are transported from Development to Quality,Changes were reflected in Q system.After testing in Q system transports were pushed to production system.The new value field is added to the operating concern. When i check the log for KEA0 in production system it displayed one message like:
    Field VV088 was added to the reference structure
    Message no. KE782.You probably either  changed the operating concern or SAP-EIS aspect, and added the field VV099 to the definition.
    The added a CO-PA value field:
    In this case, the field is added to the definition or the summarization levels. This invalidates all existing levels. Consequently, you need to activate them again and fill them with data.
    In production system maintaining operating concenr or KEAO is only in display mode.Is it needed to regenerate the operating concern once again in production, how to do it. Is the message talking about the KEDV summarization levels.?
    thanks
    rahul

    Hi,
    No no ....KEDV is nothing to do here....that is creation of summarization in CO-PA.
    Since you added new value field you necessarily have to Regenerate the operating concern...
    Use Tcode KEA0...go to Environment tab...there the status of Cross client part  and client specific part both will be in RED....now just click on the Cross client (candle button)...now the system would regenerate the operating concern...once it is over do the same for the client specific...
    Beware when you do regenerate the operating concern no body can enter any transaction in that server since it is cross client table ...hence better do it after business hours.
    Hope this helps!
    Running KEDU with rebuild is relevant only when you already have created summarization and called up the same in the CO-PA report "options" tab. If you did not created the summarization you are nothing to do with KEDU.
    Next: The new value field has to be transported to PRD and hence even in PRD we have to do the regeneration manually.
    Regards,
    Velumani
    Message was edited by: Velumani Arunachalam
    Message was edited by: Velumani Arunachalam

  • ADF query panel with table, adding new search fields dynamically

    I am a beginner very new to ADF world. I have a ADF query panel with table which has its source from a ViewCriteria. I need to add a new search field on the form dynamically based on the user's need. Assume I am using a Employee table and I have search "employee ID" as one field in the form, upon clicking a add button in the form I need to have a another "employee ID" field appears along with the already existing one.
    I tried to add the condition in ViewCriteria but do not know how to add it ?
    Could some one pls address how it can be approached ?

    User, please always tell us your jdev version.
    Well, this use case need some thinking to be done. What do you want to archive with adding a new query field to the panel? As you said you already have one field for employeeId and now, on a click on a button, you add another one. How would the resulting query work with the new field? Should it use 'and' to concatenate the query or should it use 'or'?
    I suggest that you use the ADF Riche Client Demo (http://jdevadf.oracle.com/adf-richclient-demo/faces/index.jspx) select the Query node and then select 'af:query'. This shows you what is possible otu of hte box using the af:query component. You can add fields to existing queries in advanced mode (e.g. use system query 5, which starts with an empty panel and allows you to add fields).
    Once you understand how this works you may come back with a more detailed use case description or you have found the solution already. Read the documentation on af:query along with trying otu the component.
    Timo

  • Adding New search criteria in Advanced Search

    Hi,
    In the page "PosVpoMainPG.xml", I have to add new search criteria "PO Description" apart from the existing ones.
    Can it be done by personalization? How?
    If not, please let me know the steps to do it from Jdeveloper.
    Regards,
    Ashish

    Check whether Query region has been used for the Page development and also figure out the construction mode (resultBasedSearch or autoCustomizationCriteria). You can create the extra column in the result table and define mappings as appropriate.
    Regards
    Sumit

  • Implications of adding new key fields to existing table

    Hi All,
    I have searched forum regarding this. But didn't find exact answer.
    We are planning to add new key fields to existing Ztable. I want to know the implications of this.
    I have checked the where used list of table and found no impact. Only one point is making me to think again and again.
    If we add key fields to existing table then we have to adjust the table from SE14 to activate it. But this adjustment doesn't ask for TR.
    So if i release my TR, entries in other systems will also be adjusted accordingly??? Business is OK with the new fields values to be blank for existing entries.
    Thanks,
    Vinod.

    Yes the data in transported  systems will also be adjusted. If this table contains too much data make transport at late hours because it will take long and table can't be used while it's adjusted. In this adjustment process data is copied to a temporary table and moved back to original table using move-corresponding command after key added. There will data loss if you remove a key or key fields field length but in your case it shouldn't be a problem.
    Edited by: Gungor Ozcelebi on Jul 2, 2009 9:18 AM

  • Adding new date field to already loaded data target.

    Hi,
        we have a cube containing date feild such as 0CALMONTH. the data is being loaded to the cube. now they have added new date feild (0FISCYEAR). how to get data to this feild. there is no data coming from source system for this feild. please can any one tell me how to include this feild and load data into it.
    with regards,
    sreekanth.

    Sreekanth,
       If Record creation date is the right field for deriving fiscal year, Why cant you derive the year from the date...by using automatioc time conversion...?? In update rules...??
      For exising data, you can do loop back to populate the data. see the below doc, for more info:
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f421c86c-0801-0010-e88c-a07ccdc69601
    Hope it Helps
    Srini
    Message was edited by: Srini

  • Adding new custom fields in SAP transaction?

    Hi,
    System - ECC 6.0
    I need to add some new custom fields in Contract Object(PSOBWORK). Can any one tell me what are the ways I can do this, and what is the best way to add custom fields in SAP transaction?
    I highly appreciate your help on this.
    Thanks.
    Rajesh

    Hi,
    Find the link below  which has step by step process of adding custom fields:
    goto site saptechnical-tutorials-ExitsBADIs-EEWB
    Hope this would be helpfull.
    Regards,
    Sharath

  • Adding new custom fields in FB01

    Hello all.
    I am having a requirment as i need to add the custome fields in Fb01 transaction at item level.
    I have added the custome fields in Bseg table, now i wan to display this fields in the Fb01 screen.
    Is thios possible to do so.

    First, I hope you are using the ECC 6.0 since this is a new functionality (or ECC 5.0????). Second, tell us the steps you have followed.
    Fernando.

  • Adding New Screen Fields Through BDT

    Hi All,
          In BP transaction there is a concession tab. i want to add 2 new screen fields from z table.
          i have added from z table in that concession tab.
    But The problem is that screen fields are coming in the last line.but where as i need those all new fields in right corner of first and second lines of the existing fields .plz.. help me
    Thanks Inadvance ,
    Siva Kumar

    Hi Vishnu
    I suggest to use EEWB for adding the new field. Follow the following steps
    1. Run Transaction EEWB (Easy Enhancement Work Bench)
    2. Create new Project.
    3. Select the relevent Z package.
    4. Create Customizing and Workbench Requests.
    5. Select table BUPA
    6. Select the type of field you require (single or table) and follow the wizard.
    The new fields will appeare on a new tab "Customer Data" on BP Screen.
    The Screen Name and Sequence can then be changed with VCT.
    Precautions:
    1. Your user must have developer's key privilages.
    2. There should not be any users working on the system when you are doing this activity.
    3. The workbench request created is client independent. The customization request created is client specific.
    4. The process is reversable and does not get effected by patch upload.
    hope this may help.
    Cheers
    Avi

  • Adding new screen field

    Hi! Gurus,
    We would like to add a new screen field to our shipment document.
    My ABAPper says there's no screen exit to do the same.
    He talks something about breaking the code and stuff like that which I dont understand much.
    Please let me know a way if you guys can think of something.
    I need to add a field in VT01N transaction.
    Thanks in advance.

    HI Runa
    check this example code.
    First of all after adding the fields, you need to display those new fields in the VA01 transaction while creating a new sale order. So for that you need to first use the exit MV45A0ZZ. In this exit under the PBO, declare any form like eg: module zz_blank_fields. The coding for the module must be like as follows:
    LOOP AT SCREEN.
    IF SCREEN-GROUP1 = '002'.
    SCREEN-INPUT = '0'.
    elseif screen-group1 = '123' or
    screen-group1 = 'QUO'.
    screen-active = '0'.
    ENDIF.
    MODIFY SCREEN.
    ENDLOOP.
    WHEN 'VA12'.
    LOOP AT SCREEN.
    IF SCREEN-GROUP1 = '123' OR
    SCREEN-GROUP1 = 'QUO' .
    screen-active = '0'.
    ENDIF.
    MODIFY SCREEN.
    ENDLOOP.
    WHEN 'VA13'.
    LOOP AT SCREEN.
    IF SCREEN-GROUP1 = '001' OR
    SCREEN-GROUP1 = '002'.
    SCREEN-INPUT = '0'.
    elseif screen-group1 = '123' OR
    SCREEN-GROUP1 = 'QUO' .
    screen-active = '0'.
    ENDIF.
    MODIFY SCREEN.
    ENDLOOP.
    ENDCASE.
    when 'B'."Quotation
    CASE SY-TCODE.
    WHEN 'VA21' OR 'VA22'.
    LOOP AT SCREEN.
    IF SCREEN-GROUP1 = '002'.
    SCREEN-INPUT = '0'.
    elseif screen-group1 = '123'.
    screen-active = '0'.
    ENDIF.
    MODIFY SCREEN.
    ENDLOOP.
    WHEN 'VA23'.
    LOOP AT SCREEN.
    IF SCREEN-GROUP1 = '001' OR
    SCREEN-GROUP1 = '002' OR
    SCREEN-GROUP1 = 'QUO' .
    SCREEN-INPUT = '0'.
    elseif screen-group1 = '123'.
    screen-active = '0'.
    ENDIF.
    MODIFY SCREEN.
    ENDLOOP.
    ENDCASE.
    when 'C'."Order
    **Additinal fields for capturing DI Details in Order
    case sy-tcode.
    when 'VA01' OR 'VA02'.
    LOOP AT SCREEN.
    IF SCREEN-GROUP1 <> '123' .
    SCREEN-ACTIVE = '0'.
    ENDIF.
    MODIFY SCREEN.
    ENDLOOP.
    when 'VA03'.
    LOOP AT SCREEN.
    IF SCREEN-GROUP1 <> '123' .
    SCREEN-ACTIVE = '0'.
    ELSE.
    SCREEN-INPUT = '0'.
    ENDIF.
    MODIFY SCREEN.
    ENDLOOP.
    ENDCASE.
    when others.
    loop at screen.
    screen-active = '0'.
    modify screen.
    endloop.
    endcase.
    Regards,
    Laxmi.

  • Adding new value fields to an existing and productive operating concern

    Hi,
    I would like to have 5 new value fields active in 4 out of 6 operating concerns that I am working with.
    Is it correct that I could do this one of the following ways:
    1. Use a value field that exists already in an operating concern and rename it?
    In this case is it necessary to regenerate the operating concern?
    Do I transport the change ?
    2. Create an entirely new value field, and assign it to the operating concern?
    Is it necessary to regenerate the operating concerns in question?
    Do I transport the change?
    3. Select a value field that is currently in the system but is not assigned to any operating concern eg some kind of SAP delivered value field?  How do I assign it to the op  con? Do I need to re gen the op con?
    Which way is the best or is there a 4th option?
    Thanks for your help in adviance
    Regards
    Aisling

    Hi,
    This note is a catalogue of notes of consulting notes where SAP tell you steps, reports to use and son . If you read them (these notes and related notes) you have the steps, guides, reports that you must use. Better advice. Try a solution with all steps in mind and check it in a quality enviroment. As you know there a lot of things in CO-PA concern (you have your own tables, with your own fields, your reports as KE2Rxxxx, and so on), your secondary indexes, etc.. , the best is try the solution in your Quality Enviroment (a quasi-clone of your production enviroment) and check the results (create SO, invoices, after modifications to check possible problems,...).
    Regards,
    Eduardo
    pd: I forgot. If the size of tables (CE4xxxx, CE1XXXX, ...check them with DB02) are so big, get the opinion of a Basis Consultant. Surely in the before note there notes about this issue.
    Edited by: Eduardo Hinojosa on Apr 23, 2010 2:41 PM

  • Adding New Custom field in KE30 Report

    Hi Friends,
    I have the requirement to Add new custon field in the KE30 report .
    Is this Possible ?
    Can anyone Tel me how to go about it .?
    Thanks in advance.

    Hi ,
    Please check the below link for KE30 -- COPA reallignment.
    https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/50482a0c-4033-2c10-3fb5-9f8c25360adf

  • BADI or User-Exit for Adding New Input Field in 0VTC

    Hi Experts,
    Has any of you worked on enhancing transaction 0VTC (Define Routes and Stages)? I have a requirement right now to add two new input fields in New Transport Routes screen. Could anyone provide a BADI or customer exit that I could use to modify the screen of the transaction?
    Thanks!
    Cross post locked
    Edited by: Rob Burbank on Mar 8, 2009 2:58 PM

    I'm concerned about the layout of the screen. Also, I didn't find any documentation about BADI_SD_ROUTE. Can anyone provide me the documentation for this BADI?
    Thanks!

  • Adding new custom fields in SAP transaction - PSOBWORK?

    Hi,
    System - ECC 6.0
    I need to add some new custom fields in Contract Object(PSOBWORK). Can any one tell me what are the ways I can do this, and what is the best way to add custom fields in SAP transaction?
    I highly appreciate your help on this.
    Thanks.
    Rajesh

    Hi ,
            There are options like screen-exits ,badis
    the best option would be to find screen exits for the transaction and you code ur logic in the exit and create the screen with your requirement .

Maybe you are looking for

  • Converting FM to PDF results in thumbnail-sized text area in the PDF

    I'm having an issue with converting FM files to PDF. I'm using all the same settings I had been using previously, but now my PDFs appear with the text and images smooshed together in a thumbnail version of the source page. The PDF page size is 8.5 x

  • Page is being cached

    Hi there, I have a page with a chart which has a link to a report on another page, the chart sql is as follows, select 'f?p=&APP_ID.:10:&SESSION.::NO:CIR,RP,10:P10_VALUE:' || my_table_value Link, my_table_label label, my_table_value value from my_tab

  • HT1212 please help i just got a mini i pad and It disabled me

    I put in the code i believe i picked and it disabled me.

  • Plant Maintenance Reports & Report Writer/Painter

    Has anyone ever used Report Painter or Report Writer to produce SAP Plant Maintenance Reports?    If so, what was your experience in using this tool and how difficult is it to produce reports? The report that needs to be generated is for overdue PM o

  • Using DW CS4 to insert text

    Hi when I am using CS4 to insert text i want to put some spaces between a couple of words on the same line. i.e.       please call      this    number        etc  etc how do i do that? Many thanks Mark