Adding or removing any functionalities in oracle convergence 2

If i want to add any new functionaliy or want to remove any existing functionality than in which folder/files i have to make changes under iwc_static folder.
Suppose i want to add any new functionality under mail section, what all steps need to follow and on which all files.
All this thing is it possible in convergence 2.

Note that early access to Convergence 2 Patch 1, which enables customization support in Convergence 2, is now available by logging a Service Request with Oracle Support.
In case you are interested, some quick links to the Convergence docs and knowledge articles, as well as information on patches, can now be found in the recently published "Master Note for Oracle Communications Convergence (Doc ID 1298122.1)"
https://support.oracle.com/CSP/ui/flash.html#tab=KBHome(page=KBHome&id=()),(page=KBNavigator&id=(bmDocID=1298122.1&from=BOOKMARK&bmDocDsrc=KB&viewingMode=1143))
Edited by: user12608224 on Feb 28, 2011 10:02 AM
Edited by: user12608224 on Feb 28, 2011 10:14 AM

Similar Messages

HT2509 Despite what this article states, Apple support told me not to try to remove any fonts as it could cause other possibly serious problems. Is there a program which can be safely installed which will keep at the top of the font list those fonts whic

An article in the New York Times yesterday told how to remove unwanted fonts from the Font Book. I followed its instructions (the same as those on the webpage "support.apple.com/kb/ht2509") and was NOT successful in removing fonts. Despite what the newspaper article and the web page stated, my attempts to remove fonts were unsuccessful. I use perhaps 15-20 of the hundreds and hundreds of fonts, and deleting those I don't use would make choosing a font a lot faster. I called support and was told not to try to remove any fonts which I myself had not added to the list(I have not added any) as doing so could cause significant problems elsewhere. The support tech suggested that there might be independent software programs which would keep at the top of the list those fonts I have used, which sure would speed up the process of selecting a font. Anyone know of such a program, or how to safely alter the font list Thanks.

I just spoke again to tech support and this time an answer was provided that works! Choose the font you want to use, drag it to the left, and a new "unnamed" folder will appear. Continue to drag into that folder fonts you want to use. You can click onto that folder to change its name. Then when using font book merely click on that folder to open it and select the font wanted. This tech rep also confirmed that you should NOT try to delete individual fonts as they are part of the basic operating system; he did confirm that the apple web page in parentheses above says otherwise, and will refer that to higher ups to see about removing or modifying that page.

The 10.4 upgrade smart playlist editing has removed the ellipse as the 3rd button option along side the adding or removing a parameter. Why? And can we get it back?

I just did the iTunes update to 10.4 (80) from 10.3 on a MacPro OS X 10.6.8 . I am extremely nervous and saddened by a subtle change to the smart playlist editing features. I have 178.26gb of music, and a very extensive array of playlists and smart playlists taking full advantage of all the wonderful features and complexity someone has taken the time to develop. I have taken years of time developing my library, and this one little change will set me back substantially. The change? Removing the ellipse as the 3rd button option along side the adding or removing a parameter. The button allowed one to create levels or groups of parameters within the dialogue window that could act independently within one smart playlist. For example, songs from artist "A" needs at least 2 stars to be included, while songs from artist "B" need three stars, and they both can be in the same smart playlist which has its first level of complexity. I have lists that go dozens of layers beyond. And dozens more that cross reference. Is there any way we can get the hierarchy back, ie. Reintroduce the ellipse button? Or is there something new I do not know about? Thanks!

I would like to second this.
This subtle yet life-changing removal is a total loss for advanced users that (used to) take full advantage of "logical and hierarchical" playlists. It tremendously impairs the "smartness" of the feature, effectively removing the possibility of mixing "and" & "if" parameters—which was the real beauty of the whole concept of "smart playlists" à la iTunes.
Here's a simple example. I would like to create a playlist combining two genres (rock and electronic) with only songs that have a rating higher than 3. I cannot do that anymore. I need to create two playlists:
a first playlist (A) that displays [Rock] OR [Electronic] (note that this playlist will never be played, it's an intermediary step required for B)
then a second playlist (B) that displays [songs from playlist "A"] AND [with a rating higher than 3].
It's a pain. And it clutters up browsing lists on my iPad/iPhone a lot.
Smart playlists should get the ellipse button back!
Moreover, the possibility of creating / editing smart playlists on iOS via a nice menu would be just… awesome. I would have thought Apple was going in that "smart" direction with iTunes. In hoping it's just a delay… until iOS 5 maybe?

Best practice for adding and removing eventListeners?

Hi,
What is the best practice in regards to CPU usage and performance for dealing with eventListeners when adding and removing movieclips to the stage?
1. Add the eventListeners when the mc is instantiated and leave them be until exiting the app
or
2. Add and remove the eventListeners as the mc is added or removed from the stage (via an addedToStage and removedFromStage listener method)
I would appreciate any thoughts you could share with me. Thanks!
JP

Thanks neh and Applauz78.
As I understand it, the main concern with removing listeners is to conserve memory. However, I've tested memory use and this is not really an issue for my app, so I'm more concerned if there will be any effect on CPU (app response) if I'm constantly adding and removing a list of listeners every time a user loads an mc to the stage, as compared to just leaving them active and "ready to go" when needed.
Is there any way to measure CPU use for an AIR app on iOS?
(It may help to know my app is small - I'm talking well under 100 active listeners total for all movieclips combined.)

Collect signatures workflow - Signatures can't be added or removed because this document was opened read-only

Hi, I have configured a "Collect Signatures" workflow for test Word document(.docx), then uploaded it to sample SP 2010 doc library (content type "Document"). This Word document has 2 empty Signature Lines in it.
After that i'm starting the Collect Signatures workflow on it , which is assigned to me and other user from my Active Directory.
Workflow is started and after that i'm receiving mail about assigned task which also contains link to document.
When i click on link it opens IE which contains SP library file path, after a while doc is opened in Word client in Read-only mode. When i want to sign the document info window pops up : "Signatures can't be added or removed because this document was opened
read-only" and i'm not able to compete task/sign doc from Word.
It is possible to sign the document when i go to SP library and opens this file directly from there (file drop-down menu-> open in MS Word).
I saw that this behaviour is similar to this article:
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/31ba43ec-b04e-428d-9a66-0cc571934197/collect-signatures-workflow-using-firefox-not-showing-workflow-task-this-document-requires-your?forum=sharepointgeneralprevious
but i'm using IE so it shouldn't be Active X issue.
I have also checked this MS Fix:
http://support.microsoft.com/kb/2661910
but changing CA settings to Permissive didn't help
Any ideas ?

Hi bezcisnien,
I could not reproduce this issue.
When you open this file directly by clicking the document Name link from SharePoint library, is there a
yellow message bar in Word document?
Did this happen to all users on all PCs?
Have you checked if it is a client side issue, test with different IE 8/9/10 versions for this issue (and IE compatibility mode, add-ons, trusted site zone etc)?
Thanks,
Daniel Yang
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Daniel Yang
TechNet Community Support

Dynamically adding and removing managed servers

Hi,
          I'm experimenting with adding and removing managed servers while applications are running on the cluster. I've written some scripts using weblogic.Admin to do the tasks. It seems that it's working. However, I'd like to confirm that this is supported. I also have the following questions:
          1. Applications running on a cluster are automatically deployed to the newly configured managed server once it is started using startManagedWebLogic.sh. Are there any non-error situations that applications are not started automatically?
          2. To remove a managed server from the cluster, I first shutdown the server gracefully and then delete the server from the domain using weblogic.Admin. Is this the recommended way to do it?
          3. Anything else I need to pay attention to before adding and removing servers?
          Thanks for any information and pointers.
          Ming

1. only if the staging mode is external.
          2. yes, if the server should be permanently removed. If the server is down for short maintenance, you do not need to remove it from the cluster.
          3. yes, try to avoid doing this during deployment tasks. That can be nasty.
          - Anders M.

A alert for compute is being investigated. Configuration changes to Virtual Machines (IaaS), such as adding or removing a disk or an endpoint may cause reboots.

I receive the following alert from Windows Azure; Any clue what does this mean?
Time: 3/26/2014 7:37:33 PM
TITLE : compute : Advisory
SUBSCRIPTION ID: Not Available
DESCRIPTION: A alert for compute is being investigated. Configuration changes to Virtual Machines (IaaS), such as adding or removing a disk or an endpoint may cause reboots.

This issue correlates with an issue you might see at the Windows Azure Service Dashboard:http://www.windowsazure.com/en-us/support/service-dashboard/
See below a paste from that page from the period of your alert. Friendly Azure is piping you courtesy notification vai your event log!
Compute : Advisory [East US, North Central US, South Central US, West US]
26 Mar 2014 1:29 AM UTC
A alert for compute is being investigated. Configuration changes to Virtual Machines (IaaS), such as adding or removing a disk or an endpoint may cause reboots.
John Joyner MVP-SC-CDM

[svn:osmf:] 14907: Adding comments, removing test URL.

Revision: 14907
Revision: 14907
Author:   [email protected]
Date:     2010-03-22 05:50:23 -0700 (Mon, 22 Mar 2010)
Log Message:
Adding comments, removing test URL.
Modified Paths:
    osmf/trunk/apps/samples/framework/OSMFPlayer/html-template/index.template.html
    osmf/trunk/apps/samples/framework/OSMFPlayer/src/OSMFPlayer.as

Thanks for the architecture comments. I'm interested in this topic because ALARM brought me to arch (although I've replaced the raspberry pi with an Intel-based machine now).
Well, I'm afraid of starting some kind of flame war by suggesting this officially as a lowly arch noob. I'll leave it up to the people who might profit by something like this (i.e. ALARM – or maybe they don't care and are fine with the current solution, in which case the change is not required at all). For the record, I like the glob solution. It's more flexible than just 'all' and it's easier to memorize the difference between 'any' and '*' compared to 'any' and 'all'.
It turned out the "adding users" topic is not an issue, because I realized I can simply set "User=nobody / Group=audio" in the systemd unit file to get rid of root privileges while keeping the permission to play audio without logging in. I also set up a minimal Arch VM to test if gnome-icon-theme can be dropped. I found no problems without that package, so I think I'm now ready to upload the modified PKGBUILD (and related files) to the AUR.
I'll flag this topic as solved. Feel free to add more comments though. Thanks everyone

[svn:osmf:] 11359: Fixing MetadataWatcher not invoking a value change callback when the parent facet of the target value is added or removed .

Revision: 11359
Author:   [email protected]
Date:     2009-11-02 05:20:01 -0800 (Mon, 02 Nov 2009)
Log Message:
Fixing MetadataWatcher not invoking a value change callback when the parent facet of the target value is added or removed.
Modified Paths:
    osmf/trunk/framework/MediaFramework/org/osmf/metadata/MetadataWatcher.as
    osmf/trunk/framework/MediaFrameworkFlexTest/org/osmf/metadata/TestMetadataUtils.as

mikeporter wrote:
I'm sorry I'm not aware of any "cumbersome" subpanels - unless of course you don't know what you're doing. There is this wonderful invention called a "subVI" that can be used to organize and simplify your code, or are they too "cumbersome" as well? You should really learn a bit about what you are pontificating over before you start running off at the mouth.
Mike...
I didn't want to step on your toes. No need to get personal.
Subpanels make some additional code necessary that hasn't got to do anything with the actual program. And I AM using subIVs as I wrote in my first post, which is exactly the root of the problem.
Nevertheless I now solved it in a way that comes close to what I wanted. I don't know if some of you meant your suggestions to be understood that way (at least I didn't ). The subVIs will now "insert" themselves (via invoke node) into a subpanel on the main vi, which they are given a reference of at call. This adds minimal aditional code, especially on the main VI which I want to keep as clean as possible. By clustering the panel reference into the parameters the subVIs are already given (not used in the example I attached below), there isn't even a change on the terminals of the subVIs.
I got to check now if this works well with event structures within the subVIs or if it can create the same problems like multiple event structures within a single VI.
So no global variables anymore and no writing values by property node. I don't know if this just wasn't possible in previous Labview versions I had a try at that (I guess it was 8.6 and/or 2009) or I just didn't come up with the idea back then.
And if the text wasn't that helpful, here are two screens:
Parent VI:
SubVI:
Attachments:
main.png ‏2 KB
subvi.png ‏5 KB

I have an application in my Firefox Options which I can't remove any help would be great

I have a download torrent called Bitlord which I have removed through my control panel - but it appears it is still there in my Options Applications which I can't removed - any help would be great

Hello liz1411, check also if you have something related to Bitlord (like toolbars) in Firefox Extensions and delete it, go from Firefox button(the orange button at the right top) > Add-ons > Extensions.
thank you

Cannot uninstall I tunes. In control panel add and remove programs it will not give me the option to remove any of the I tunes. In program files it tells me access denied to remove any of the related items. I have tried using the removal methods from i tu

My i tunes will not work at all. I have tried all the steps given to remove my I tunes player but in my control panel, add and remove programs it does not give me an option to remove any of the apple/ I tunes. I tried to go to program files and remove all the files but access is denied. This all started about 1 1/2 years ago and with every i tunes update i got more and more errors or problems until it stopped working. At one time i could remove and reinstall i tunes to try to fix it but now i cannot do anything. I believe one of the last was i could not open i tune because it was being used or was on another network, not 100% sure its been so long and frustrating I quit trying 6 months ago. Hopefully someones got some help !!!
Thanks I appreciate your time; Philip

See Troubleshooting issues with iTunes for Windows updates.
tt2

I would like to uninstall or otherwise safely remove any applications that make my MB Pro run slowly.

I would like to uninstall or otherwise safely remove any applications that make my MB Pro run slowly. I will have to keep a few apps such as CrossWeb and Veraport due to having to use secure banking and government websites in Korea. I also need the LogMeIn app to access a server in the USA, but I realise that some people recommend getting rid of it.
I tried but apparently have been unsuccessful in removing a McAfee VirusScan application completely. I can still see some files in the HD Library. Any ideas here on how to safely uninstall/remove?
Also any suggestions on how to get rid of my incompatible virtualbox? I think it's 4.0.4.
Also, if you see anything else I should uninstall/remove from the EtreCheck below, by all means please make suggestions.
Thanks so much for your help, suggestions, and advice!
Hardware Information:
    MacBook Pro (15-inch, Mid 2010)
    MacBook Pro - model: MacBookPro6,2
    1 2.53 GHz Intel Core i5 CPU: 2 cores
    4 GB RAM
Video Information:
    Intel HD Graphics - VRAM: 288 MB
    NVIDIA GeForce GT 330M - VRAM: 256 MB
System Software:
    OS X 10.9.2 (13C1021) - Uptime: 0 days 1:55:49
Disk Information:
    ST9500325ASG disk0 : (500.11 GB)
        EFI (disk0s1) <not mounted>: 209.7 MB
        Macintosh HD (disk0s2) / [Startup]: 499.25 GB (295.55 GB free)
        Recovery HD (disk0s3) <not mounted>: 650 MB
    MATSHITADVD-R   UJ-898
USB Information:
    Apple Internal Memory Card Reader
    Apple Inc. BRCM2070 Hub
        Apple Inc. Bluetooth USB Host Controller
    Apple Inc. Apple Internal Keyboard / Trackpad
    Apple Inc. Built-in iSight
    Apple Computer, Inc. IR Receiver
Thunderbolt Information:
Gatekeeper:
    Anywhere
Kernel Extensions:
    [not loaded]    com.cisco.cscotun (1.0) Support
    [kext loaded]    com.logmein.hamachi (1.0) Support
    [kext loaded]    org.virtualbox.kext.VBoxDrv (4.0.4) Support
    [not loaded]    org.virtualbox.kext.VBoxNetAdp (4.0.4) Support
    [not loaded]    org.virtualbox.kext.VBoxNetFlt (4.0.4) Support
    [kext loaded]    org.virtualbox.kext.VBoxUSB (4.0.4) Support
Startup Items:
    KeyAccess: Path: /Library/StartupItems/KeyAccess
    VirtualBox: Path: /Library/StartupItems/VirtualBox
Launch Daemons:
    [failed]    com.adobe.fpsaud.plist Support
    [loaded]    com.adobe.SwitchBoard.plist Support
    [running]    com.cisco.anyconnect.vpnagentd.plist Support
    [loaded]    com.google.keystone.daemon.plist Support
    [running]    com.logmein.hamachi.plist Support
    [running]    com.sassafras.KeyAccess.plist Support
    [loaded]    com.tunnelbear.mac.tbeard.plist Support
Launch Agents:
    [not loaded]    com.adobe.AAM.Updater-1.0.plist Support
    [loaded]    com.cisco.anyconnect.gui.plist Support
    [loaded]    com.google.keystone.agent.plist Support
    [running]    com.logmein.hamachimb.plist Support
    [loaded]    com.sassafras.KeyAccess.plist Support
User Launch Agents:
    [loaded]    com.adobe.AAM.Updater-1.0.plist Support
    [loaded]    com.adobe.ARM.[...].plist Support
    [loaded]    com.adobe.ARM.[...].plist Support
    [running]    com.spotify.webhelper.plist Support
    [not loaded]    org.virtualbox.vboxwebsrv.plist Support
User Login Items:
    GrowlHelperApp
    GrowlHelperApp
    iTunesHelper
    SuperDrive Update 2.1
    Google Drive
    Dropbox
    DaumLiveAgent
    KeyAccess
Internet Plug-ins:
    npCrossWebPlugin: Version: 1.0 - SDK 10.5 Support
    o1dbrowserplugin: Version: 5.3.1.18536 Support
    Google Earth Web Plug-in: Version: 6.1 Support
    Default Browser: Version: 537 - SDK 10.9
    Flip4Mac WMV Plugin: Version: 2.4.1.4 Support
    OfficeLiveBrowserPlugin: Version: 12.3.6 Support
    RealPlayer Plugin: Version: (null) Support
    AdobePDFViewerNPAPI: Version: 10.1.10 Support
    FlashPlayer-10.6: Version: 13.0.0.214 - SDK 10.6 Support
    DivXBrowserPlugin: Version: 2.0 Support
    Silverlight: Version: 5.1.20913.0 - SDK 10.6 Support
    Flash Player: Version: 13.0.0.214 - SDK 10.6 Support
    iPhotoPhotocast: Version: 7.0
    googletalkbrowserplugin: Version: 5.3.1.18536 Support
    QuickTime Plugin: Version: 7.7.3
    AdobePDFViewer: Version: 10.1.10 Support
    Veraport: Version: 1.1.0.2 - SDK 10.7 Support
    JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Check version
Audio Plug-ins:
    BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
    AirPlay: Version: 2.0 - SDK 10.9
    AppleAVBAudio: Version: 203.2 - SDK 10.9
    iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins:
    Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
3rd Party Preference Panes:
    DivX Support
    Flash Player Support
    Flip4Mac WMV Support
    Growl Support
    KeyAccess Support
    Symantec\nQuickMenu Support
Time Machine:
    Mobile backups: OFF
    Auto backup: NO - Auto backup turned off
    Volumes being backed up:
        Macintosh HD: Disk size: 464.96 GB Disk used: 189.71 GB
    Destinations:
        Data [Network] (Last used)
        Total size: 2
        Total number of backups: 30
        Oldest backup: 2012-08-12 07:49:57 +0000
        Last backup: 2014-05-05 04:48:48 +0000
        Size of backup disk: Excellent
            Backup size 2 > (Disk size 464.96 GB X 3)
    Time Machine details may not be accurate.
    All volumes being backed up may not be listed.
Top Processes by CPU:
         3%    WindowServer
         0%    fontd
         0%    PluginProcess
         0%    Google Drive
         0%    com.apple.WebKit.Networking
Top Processes by Memory:
    188 MB    com.apple.IconServicesAgent
    143 MB    Finder
    143 MB    mds_stores
    102 MB    Safari
    98 MB    WindowServer
Virtual Memory Information:
    53 MB    Free RAM
    1.55 GB    Active RAM
    1.50 GB    Inactive RAM
    787 MB    Wired RAM
    537 MB    Page-ins
    316 KB    Page-outs

You have so much junk, and I doubt that you know how to uninstall it.
It's up to you what you do, I know what I would do (but then I wouldn't stuff my Mac with junk in the first place)
Good luck.

An insect got behind the screen of my MacBook and has since died, leaving a black dot on the screen. As this is a sealed unit the insect cannot be removed, any ideas.

An insect got behind the screen of my MacBook and has since died, leaving a black dot on the screen. As this is a sealed unit the insect cannot be removed, any ideas.

I believe your only option will be to get Apple to replace the screen for you, which won't be cheap. If the machine is still covered under warranty, you could try to push the case that the screen must be defective for a bug to get in there. Apple has been known to do free out-of-warranty service in some pretty unbelievable circumstances, that that is at their discretion, so be very pleasant and polite so they'll like you and want to help you out. But be prepared to have to pay for the repair.
Good luck!

HT2736 How do you remove any remaining gift certificate credit from your itunes account as one is prompted to do this if you want to change your country or region?

How do you remove any remaining gift certificate credit from your itunes account as one is prompted to do this if you want to change your country or region?

Please supply answers that do not refer me to contacting support.

Is there any version of Oracle BPEL Process Manager 10.1.2.0.2 for Solaris

Hi
Thank you for reading my post
Is there any version of Oracle BPEL Process Manager 10.1.2.0.2 for Solaris X86 available or under development?
Does any one tried the sparc version on x86?
Thanks

I looked there and it say there is only SPARC architecture available.
I want to ask whether any one tried to install the sparc version on X86 or not as it is java and should run everywhere.
Thanks.

Adding or removing any functionalities in oracle convergence 2

Similar Messages

Maybe you are looking for