Adding Phones in the CCME 3.2.1 GUI

For some reason when I attempt to add a phone in the Call Manager Express GUI I get an error saying there are no new phones to add. I have a max phones of 24, and I only configured 5 in the CLI.
What step am I missing?
Any help would be appreciated!
Thank you,
Ben

Ben,
Make sure you have,
telephony-service
dn-webedit
time-webedit
Sankar

Similar Messages

  • Just updated my iphone. Now I can se I have two? iCloud accounts? One of them appears on my phone, and I have forgotten the password. When I try to add the other account, I get the message that this account is already added, but with the name of the first

    Just updated my iphone. Now I can se I have two! iCloud accounts? One of them appears on my phone, and I have forgotten the password. When I try to add the other account, I get the message that this account is already added, but with the name of the first account where there is no available password. I have tried several times to reset the password, bun I don't get the information I need - I have no access to email. What can I do?

    Hi, thanks for the suggestion. I have tried as you suggested, and when opening the "purchased" apps some have the icloud logo next to them, but I only have "OPEN" against "Find My iPhone". When opening it up, it goes through the same routine; needs to be updated before proceeding, and wouldn't update because I don't have IOS8.
    Anything else I could try, or am I doomed!
    All of your help is much appreciated, thanks

  • I updated to ios 5.1.1 and added icloud services. the problem is now whenever i connect my iphone to my PC, itunes does not recognize my phone. i need it to but it just does not connect..

    i updated to ios 5.1.1 and added icloud services. the problem is now whenever i connect my iphone to my PC, itunes does not recognize my phone. i need it to but it just does not connect..

    Try the standard fixes to rule out a software problem:
    - Reset. Nothing is lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup
    - Restore to factory defaults/new iPod.
    If you still have the problem that points to a hardware problem. Yu can make an appointment at the the Genius Bar of an Apple store or try:
    fix for Home button

  • How do you get Itunes to only sync newly added photos from my phone to the computer and not every photo on my phone each time I try to sync?

    How do you get Itunes to only sync newly added photos from my phone to the computer and not every photo on my phone each time I try to sync?

    Hello Angelcasper,
    Welcome to Apple Support Communities.
    The following article provides some suggestions on importing photos from your iOS device to your computer.
    iOS: Import personal photos and videos from iOS devices to your computer
    http://support.apple.com/kb/HT4083
    Regards,
    Jeff D.

  • I have switched the sim card from one iphone to a different one, and i added my music from my old phone to the used one, now the old music on the used phone won't delete. im really frustrated and annoyed please help

    i have switched the sim card from one iphone to a different one, and i added my music from my old phone to the used one, now the old music on the used phone won't delete. im really frustrated and annoyed please help

    Do you just want to delete the music or wipe the whole phone since you've switched to the other one?
    If you plug the old iPhone into your computer you can remove stuff via iTunes or remove stuff directly from the iPhone too.

  • I need to setup 7800 Series IP Phones in the CUCM 8.6.2 which by default are not support but will work after install the software. Anyone have document from Cisco as I remember I seen once before.

    I need to setup 7800 Series IP Phones in the CUCM 8.6.2 which by default are not support but will work after install the software. Anyone have document from Cisco as I remember I seen once before.

    Hi Ali,
    I'll just add this reference to the good tips from my friend Manish (+5)
    Support for the 7800 series in CUCM 8.6.2 was first added with this
    Device Pack;
    Cisco Unified Communications Manager
    Device Package 8.6(2)(24104-1)Release Notes
    Cisco Unified Communications Manager Device Package Release 8.6(2)
    adds support for the Cisco IP Phones
    7821, 7841, and 7861 running SIP firmware release 10.1(1).
    The steps are in this doc
    http://www.cisco.com/web/software/282074299/107528/cmterm-devicepack-8.6.2.24104-1_Readme.pdf
    You might as well install the latest 8.6.2 Device pack
    cmterm-devicepack8.6.2.24112-1.cop.sgn
    Cheers!
    Rob
    "Seek it out and ye shall find  " 
    - OneRepublic

  • I want to upgrade the IOS of my Cisco 2821 from Version 12.4(11) to v 15.1 (XB), but I have CCME v 4.2 (0), is there any problem if I only upgrade the IOS and leave the CCME as it ?

    I want to upgrade the IOS of my Cisco 2821 from  Version 12.4(11) to v 15.1 (XB), but I have CCME v 4.2 (0), is there any problem if I only upgrade the IOS and leave the CCME as it ?
    Thanks

    CME is part of the IOS, so you can't upgrade the IOS seperately from CME.
    That said, if this is a production environment you should proceed with caution and be prepared to roll back as you may find bugs, etc.
    You should also look at release notes and make sure your phone firmware will still work or needs to be upgraded too.
    Brandon

  • Why does Apple lock my phone to the first SIM I activate with? How to clear the IMEI?

    I paid a premium to purchase a unlocked iPhone direct from Apple Canada so that I could use this phone around the world with various SIM cards. As it turns out however, Apple locks this phone upon the initial activation with the SIM I had installed for the activation. The result is that I can receive calls, send/receive SMS but cannot send calls.
    Apple tells me that its Rogers I need to talk to. Rogers wants $60 to unlock my phone and tell Apple's IMEI database that this phone is legit. So why can't Apple register my IMEI directly in their own database? I bought the phone from them, unlocked.
    This is unacceptable frankly!
    Apple advised to do a restore from iTunes with the new SIM and it should unlock. I attempted this after a backup, restoring from the backup, but am still unable to make calls.
    Can anyone please advise how I can register my IMEI directly with Apple or how I can get this working again? I'm 5 months with a $800 piece of hardware that can't make phone calls.
    @Apple...can you please provide me with an official story of how this works, why its done this way and how it is to be solved?
    Appreciate the time of anyone who can help on this matter.

    iPhones which are sold subsidized or bought directly from a carrier are all carrier locked iPhones.
    The only way to buy an unlocked iPhone is direct from Apple at full price. This is just the way it is.
    As far as unlocking the iPhone goes it is up to the carrier. Rogers started to unlock iPhones back in December for $50 + applicable provincial taxes, which puts it somewhere close to $60. This is a service that Rogers offers and has nothing to do with Apple. Yes the IMEI number is added to town Apple server somewhere but the service is to do with Rogers. If you are having issues with the unlocking process then you need to contact Rogers.
    Once the IMEI number has been sent in you should be able to connect your iPhone to iTunes and do one of two things. You can restore the iPhone with the original SIM. You should get a message saying the iPhone is unlocked with the restore is completed. Second option is to install a sim card from a differnt carrier and then connect to iTunes. No restore should be required if you have a sim card from a differnt carrier.
    If you are not getting service with the new carrier and the sim card I would say double check that the sim card is working properly and is activated with the new carrier. You should be able to call them to see.

  • I plugged my iphone 4 up to itunes and it reset my phone to the factory settings and removed all of my emails, texts, appd and contact list.  How can I retore my previous settings and information?

    I plugged my iphone 4 up to itunes and it reset my phone to the factory settings and erasaed all of my emails, texts, apps, and recently added contacts.  How can I restore my previous settings and information?

    iTunes doesn't just restore a phone to factory settings all by itself.  You must have selected the incorrect button.
    In any case, if there was a previous backup of your phone, you can restore your phone from this backup.  Any new data you added to your phone since this backup is gone.
    If you have no backup, then your data is gone.

  • Adding phone file format

    in cm6
    i was able to add group of phones using the builtin excel and export to csv on bat.
    i noticed that the csv text file can be seen on ADD FILE FORMAT with the FORMAT FILE NAME HAVING 2 options (default and simple)
    i didnt do anything on this but as i said i was able to insert the group of phones.
    just want to know what is the purpose of going to that procedure of adding file format..
    thanks

    Hi Celso,
    These relationships are nicely explained in this doc;
    Using a Text Editor to Create the CSV Data File for Phones
    You can create the CSV data file by using lines of ASCII text with values separated by commas. The comma separated values (CSV) file provides textual information in tabular form.
    Use one of these file format options to identify the device and line fields within the CSV data file:
    •Default Phone-Contains a predetermined set of phone device and line fields.
    •Simple Phone-Contains basic device and line fields for phones.
    •Custom-Contains device and line fields that you choose and order yourself.
    You cannot modify or delete the Simple Phone or Default Phone file formats.
    Note: When you use the Cisco Unified Communications Manager Bulk Administration (BAT) spreadsheet to create the CSV data file, you can create the file format within the spreadsheet. When you use a text editor to create the CSV data file, you need to create a file format or use the simple or default file format. You enter the values in the text-based file in the same order as specified in the file format.
    Phone File Format
    http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/bat/6_1_1/t03phfmt.html
    Hope this helps!
    Rob

  • Issues adding phones since CCA3.0 / SP 8.1 on UC520

    Hi there,
    I have an UC520 for testing before upgrading our customers systems. (System is running SP 8.1 with German langpack: UC520_8.1.0.zip, UC500_8.1.0_locale_de_DE.zip)
    I'm having some problems with adding users/phones/extensions using CCA 3.0 everything else is working fine so far.
    Phoneloads upgraded successfully (8-5-4 for 79xx and 7-4-6 for SPAxxx).
    To the problem: When I try to add a new phone with a new extension and new user I go to Configure > Telephony > Users and Extensions > Users and Phones. Then adding a new phone through the "ADD" button. Everything works fine until I try to configure the Line Button. CCA tells me at the bottom error-information-bar "Invalid Button Configuration" - but it looks correct to me! When I apply these settings CCA crashes - without any changes on the UC520.
    Any suggestions?
    Additional Information:
    - Configuring phones for Extension Mobility works.
    - Using CLI / Webinterfaces for configuration works fine. But phones configured this way are not managable through CCA 3.0.
    Thanks for your help.
    Patrick
    Tell me if you need any further information.

    the UC is for testing so its basically a separated network. it is connected with one DHCP interface to our company network.
    This log was produced while connecting to the interface IP of the VLAN connected to the company network. But I had the same issue when I connected a Laptop directly to the UC on VLAN1 (default IP - i think it is 192.168.1.1)
    Operating System was WinXP 32Bit in both cases. CCA version 3.0.
    I upgraded the system using CCA > Maintenance > Software Upgrade --> selected Softwarepack and locale pack... had to upgrade the phoneloads separately. Also with CCA 3.0.
    Will try the Java+CCA reinstall tomorrow morning.

  • Can the phone site be disabled and have phones display the desktop site while designing phone site?

    Currently, I have a live desktop design website which is being updated regularly. I tried to begin a phone site design, but was interrupted with a change to the desktop site (I'm adding new sponsors to an event on a regular basis). When I uploaded to the FTP, the phone site was also pushed through, making an unfinished page pop up on the browser of my phone. My phone site is going to be quite large in regards to page number and it's not practical to disable and enable each individual page.
    Can I have the phone site entirely disabled and have phones display the desktop site while in the process of designing the phone app? I will still need to update the desktop site during this design period.
    Thanks!

    A similar thread here that should answer your query - http://forums.adobe.com/message/5551805.
    Thanks,
    Vinayak

  • Calling skype to a mobile phone outside the origin...

    I have a portuguese phone and I am abroad - in Andorra.
    If someone calls me from skype, which rate will be applied? From Portugal to Andorra, or From Portugal to Portugal?
    And what about my Mobile Phone, will I have to support roaming costs?
    Thank you.
    M
    Calling skype to a mobile phone outside the original country

    your partner's mobile is registered in the UK
    calls forwarded from Skype to that UK number are covered (as you know)
    as is, forwarded calls would still be going to the UK number, and he would pay roaming charges from his mobile carrier for the priviledge of answering these calls while abroad (iow, has nothing to do with Skype)
    if he got a local SIM for his mobile phone while abroad, then Skype could be forwarded to that number for free if he added a Skype subscription that covers SkypeOut calls to the number associated with that local SIM (in your example this would be Unlimited US/Canada sub)
    Regards,
    Neil

  • Trouble deleting phones off the bluetooth menu

    I added a few peoples phones to my bluetooth on my laptop but now im trying to delete them, but apparently i can ONLY delete my own phone... When i click on other peoples phones the DELETE button greys out... how do i delete the other phone??
    When i go to the preferences the only phones listed are:
    MINE
    Vincent
    Motorola Phone
    MINE being the only one that the DELETE button doesnt gray out with.
    and when i go to the bluetooth program to transfer a file to or from a phone or the comp. these names pop up...
    Bush
    MINE
    Vincent
    Tim
    Motorola Phone
    Why arent Bush or Tim listed under the bluetooth preferences??

    Searching found this:
    How to delete old devices from Bluetooth File Exchange list

  • My business partner signed up for the acrobat xl pro, and added me to the account.  it send me an email to download and install, but after it downloads, nothing happens, can't double click on it to open, it just does nothing on the double click.  I tried

    my business partner signed up for the acrobat xl pro, and added me to the account.  it send me an email to download and install, but after it downloads, nothing happens, can't double click on it to open, it just does nothing on the double click.  I tried to download again, and still same thing.  I am on a mac with latest OS.  Does anyone know what I am doing wrong?

    he is on a pc, we bought a subscription to the license and was told it's 180 a year or 14.99 monthly per user, on the business plan.  So the sales rep on the phone walked us through adding the people who will be added to account who will need a license to use.  the sales rep said that we just need to go to that section and add users and it will email the user a link to download the file and install

Maybe you are looking for

  • Error while activating objects copied into new namespace.

    I am receiving the following error when I am trying to activate objects copied from an existing namespace to new namespace. What could be the reason ? Activation of the change list canceled Check result for Message Mapping MM_BBP_ESI_ERP_CONTRACT | h

  • Ipod not recognized by updater/itunes

    I've gone through all the steps listed on the help pages. I've done as many of the 5 r's as I can. I just got a video ipod last weekend. I have the latest updates on itunes and ipod updater. I know the ports arent the problems because when I plug in

  • Activity report?

    Hi all, is there any kind of activity report available in SAP-PS, that you can edit and print for a customer? (e.g. via a smartform) Thanks

  • Illustrator I/O error when trying to save.

    I am running Illustrator CS4 tryout on a windows xp machine and when I try to save a file I get a file I/O error.  I tried saving in other formats with no success.  Previous files that did save correctly can now not be opened either.  Please let me k

  • Background job , how we set report width

    Hello, when i run a report in background, 'Background Print Parameters' window appears. Here i see various values filled default. Like a name in Spool Request -- Name. Report page -65. Report width --450. How is Report width set = 450. Can you please