Adding Wireless Profile XML In TS or Command Line in SCCM

   I have exported my wireless profile to an XML file and have created a package and tried from the command line in TS but keep getting errors (0x00000001 or 0x80004005). The command line I've been using is netsh wlan add profile filename="<Profilename>"
I have to be missing something. Does anyone have any ideas?

Now I'm with you :)
My way of doing it is that i have my scripts included in the toolkit package (we do use integrated MDT). 
Therefore i need a use toolkit befor i riun my script. 
After that I just use a run command line step with Cscript.exe "myscriptname".
Sccm is running as system so it should have all permissions it needs.
By the way, you are not trying to do a gpupdate by chance? That will not work (at least not in 2007)

Similar Messages

  • I want to delete a wireless entry in Keychain from the command line - how?

    We have 800+ laptops that have a wireless that we want deleted from the stations keychain. The ssid is called "campus".
    I would like to know how to using command line delete the campus entry. I have been playing with the security command, but cannot seem to delete the keychain entry.
    Any suggestions?

    "Everything I know about the command is in the man page. I can't give you a literal command, because I don't know what to put in for the arguments. To be honest, if the man page is not understandable enough for you to build the command, I don't think you should use it at all. Use Profile Manager in OS X Server, which is the right way to do what you're trying to do."
    I do not know why this post did not show up here on the thread, I did get the email. Not sure how to respond. We have 800 stations. Can not go and touch each one, so looking for a command line to remove the ssid "campus" - If I read your message correct, you do not know the command line either for this. Thank you.

  • Wireless 1130 AP can't use command line

    I am unable to type anything in the command line of this AP. It has the latest IOS image installed. I can see the output of the bootup process and it loads the IOS image and brings up interfaces and whatnot but it doesn't go to the command line. I have attempted to turn this AP into autonomous mode and feel that I was successful but am still unable to use the command line.
    Can someone please help me out?

    Yes make sure your console client terminal setting is same as below and then check.
    Bits per Second: select 9600 (or desired baud rate)
    Data Bits: select 8
    Parity: select None
    Stop Bits: select 1
    Flow Control: select none

  • How to pass an xml file as a command line argument

    i would like to know how to pass xml tags (not an xml file) while running java command. i have already compiled the code and i have a .class file generated. i need to pass this argument in the java command because i am calling a web service which requires an xml as parameter to it.
    to be precise the java code contains soap request and i need to pass xml at run time.
    pl do reply if you have any ideas or solutions...
    Thanks in advance,

    I got the answer myself
    Got the answer myself. I needed the ActionServlet Context in the ActionClass. This is what I have done...
    It works.
    InputStream is = getServlet().getServletContext().getResourceAsStream("/WEB-INF/conf/menu.xml");
    Document document = builder.parse(is);

  • Generating XML Using the XSU Command Line  : connection error

    I've been trying run the sample provided by the XSU doc to extract data from a table and present it in XML format. By I've been getting this connection error.
    My DB version : Oracle9i Enterprise Edition Release
    C:\>java OracleXML getXML -user "scott/tiger" "select * from emp"
    Exception in thread "main" java.lang.UnsatisfiedLinkError: make_c_state
    at oracle.jdbc.oci8.OCIDBAccess.make_c_state(Native Method)
    at oracle.jdbc.oci8.OCIDBAccess.logon(
    at oracle.jdbc.driver.OracleConnection.<init>(
    at oracle.jdbc.driver.OracleDriver.getConnectionInstance(OracleDriver.ja
    at oracle.jdbc.driver.OracleDriver.connect(
    at java.sql.DriverManager.getConnection(
    at java.sql.DriverManager.getConnection(
    at OracleXML.getConnection(
    at OracleXML.To_XML(
    at OracleXML.ExecuteGetXML(

    Check the solution for this problem from
    Re: Oracle Driver  oci8   Error
    You cna even check the link for more information

  • Adding rights to forms programmically or thru command line

    We have the reader extension 7.0 and it comes with the web interface to add rights one file at a time. I checked the API and still not sure where to start. If somebody can shed more light I'll appreciate it. Also do I need other components to develop API.. we host our reader extension in Solaris 10. Many thanks.

    You can use the Java API to do it. See the developer_guide.pdf and api_reference.pdf that comes with the product.
    Adobe Enterprise Developer Support

  • I can not uninstall Office 2013 from command line

    Hi, I have been stuck for a while trying to uninstall Office 2013 via command line. Installation file was downloaded from Volume Licensing Service Center, Uninstall.xml file for silent uninstallation looks like this:
    <Configuration Product=”ProPlus”>
    <Display Level=”basic” CompletionNotice=”yes” SuppressModal=”yes” AcceptEula=”yes” />
    From command line the following will not work:
    setup /uninstall ProPlus /config .\ProPlus.ww\Uninstall.xml
    Error: Setup can not find or validate an installation file. Please try reinstalling Office . . .
    setup /uninstall ProPlus gives me GUI to continue process - it seems /config .\ProPlus.ww\Uninstall.xml part does not work as it should be
    This is very important to me since I used above command line in SCCM 2012 R2 to allow user to uninstall Office 2013 by itself via Software Center. When this failed I tried locally but the error was the same. This should have been trivial task - silent uninstallation
    using .xml file. It is not a rocket science. I am very angry because losing time for something like this is unacceptable for system engineers working with SCCM 2012 R2.

    This error might occurs due to lots of reasons. Where is the installation file stored? If it's stored on a network share, please copy it to your local disk, and then manually run the command again. This way, we'll see if the installation file is the
    If issue persists in this case, then this generally means that something wrong with the installation file. Please try to redownload it and then try again.
    Please also make sure that you're executing the command with elevated privileges (run as administrator).
    Ethan Hua
    Forum Support
    Come back and mark the replies as answers if they help and unmark them if they provide no help.
    If you have any feedback on our support, please click

  • How to upde userid to uid=0 using command line?

    Hi all,
    I made a new user "sysadmin" by typing at root command line:
    # useradd sysadmin (all default profile values)
    What is the command (line) to update its UID to "0"?
    Thanks you very much in advance.
    Ms KK

    In general, having multiple accounts with the same UID is a bad idea. To have
    multiple "root" accounts is very, very bad idea.
    If you need an ordinary mortal user to be able to execute privileged commands,
    set up the sudo(1) facility. This will let you grant permission with a fine
    level of control about exactly which program or command is being used. As a
    bonus, you will get an audit trail of who did what as whom.
    The great thing about sudo(1) is that you can grant root privilege without
    having to give out root's password.
    Now, assume you make duplicate "root" accounts. You get offered a better job
    and leave. The new sysadmin will need careful briefing before doing anything.
    This will create a major maintainability issue long term.
    If you want another root user for disaster recovery or losing the password,
    there are better alternatives such as:
    -- Reboot the system using rescue mode from the installation disks.
    -- Boot into single-user mode by interrupting the GRUB install sequence and appending "s" to the kernel command line.
    -- Boot into an interactive shell by appending the "init=/bin/bash" clause using the same technique.
    These are some of the known, common, best practice methods of handling this
    situation. A custom solution here could be quite dangerous and hard to maintain
    in the long run.
    Please don't.

  • Gummiboot and Kernel command line

    I trying to change the mouse pulling rate to 2 ms using the Arch-wiki for “Mouse Polling Rate” and "gummiboot"
    Before I used grub-legacy on a old pc and it worked fine adding
    usbhid.mousepoll=2  to the kernel command line
    however with gummiboot it does not work ?
    title          Arch Linux
    linux      /vmlinuz-linux
    initrd      /initramfs-linux.img
    options     root=/dev/sdb2 rw usbhid.mousepoll=2
    Is there a way to get the command line working ?

    The kernel command line works just fine if the machine boots.
    I think you should try using the /etc/modprobe.d method, as that is the other way that module options can be specified. 
    The way I see it, this way seems more appropriate for things like what you are trying to do.  The kernel command line I think should be used for built-in things, like acpi.  Though some things need to be specified on the kernel command line in order to make them actually work.  For example, the libahci module is set up to spin up drives one at a time in some kind of an attempt to efficiently use power.  So of course if you set this in /etc/modprobe.d, by the the time it gets to this setting, it will already be done, so you would use libahci.ignore_sss=1 on the kernel command line.
    For more info, see the modprobe.d and modprobe man pages.

  • MDT 2013 - Concatenate command lines in an application?

    Total noob to MDT. Have a few years experience with SCCM. My ongoing project is to create bootable media (DVD's only, no USB allowed...) to rebuild seats not attached to our network.
    I know one can concatenate command lines in SCCM task sequence steps... wondering if I can do so in applications too?
    Create application BlahBlah
    Dir structure is:
    The application will point to \BlahBlah as the source dir
    In the application command line, will this command work?
    "xcopy .\A\*.* c:\temp\BlahBlahA /E /Y & xcopy .\B\*.* c:\temp\BlahBlahB /E /Y"

    It depends on what your working directory is set to
    But I'd recommend using a script to handle installing applications, copying files, etc. You can then do far more advanced functions with the ability to log as well.
    For instance here's a script I wrote to install Firefox and copy over configuration files. It's one script that handles both x86 and x64 architectures.
    <job id="Install-MozillaFirefox">
    <script language="VBScript" src="..\..\scripts\ZTIUtility.vbs"/>
    <script language="VBScript">
    '// Purpose: Used to install Flash Player
    '// Usage: cscript Install-MozillaFirefox.wsf [/debug:true]
    '// Version: 1.0 - September 29, 2014
    '// Version: 1.1 - February 6, 2015 - Corrected architecture detection
    '// Global constant and variable declarations
    Option Explicit
    Dim iRetVal
    '// End declarations
    '// Main routine
    On Error Resume Next
    iRetVal = ZTIProcess
    ProcessResults iRetVal
    On Error Goto 0
    '// Function: ZTIProcess()
    '// Input: None
    '// Return: Success - 0
    '// Failure - non-zero
    '// Purpose: Perform main ZTI processing
    Function ZTIProcess()
    oLogging.CreateEntry "Install-MozillaFirefox: Starting Mozilla Firefox installation", LogTypeInfo
    ' Disable Zone Checks
    ' Install Mozilla Firefox
    iRetVal = oUtility.RunWithHeartbeat(oUtility.ScriptDir & "\Installer\Setup.exe -ms")
    if (iRetVal = 0) or (iRetVal = 3010) then
    ZTIProcess = Success
    ZTIProcess = Failure
    oLogging.CreateEntry "Install-MozillaFirefox: Error installing Application Plugin. Check the log " & oUtility.LocalRootPath & "\SMSOSD\OSDLOGS\Install-MozillaFirefox-Plugin-App.log", LogTypeWarning
    End If
    ' Configure Mozilla Firefox
    If oEnvironment.Item("Architecture") = "X86" then
    oLogging.CreateEntry oUtility.ScriptName & ": Configuring for 32bit OS", LogTypeInfo
    oFSO.CopyFile oUtility.ScriptDir & "\Installer\override.ini", oENV("ProgramFiles") & "\Mozilla Firefox\", True
    oFSO.CopyFile oUtility.ScriptDir & "\Installer\mozilla.cfg", oENV("ProgramFiles") & "\Mozilla Firefox\", True
    oFSO.CopyFile oUtility.ScriptDir & "\Installer\local-settings.js", oENV("ProgramFiles") & "\Mozilla Firefox\Defaults\Pref\", True
    oLogging.CreateEntry oUtility.ScriptName & ": Configuring for 64bit OS", LogTypeInfo
    oFSO.CopyFile oUtility.ScriptDir & "\Installer\override.ini", oENV("ProgramFiles(x86)") & "\Mozilla Firefox\", True
    oFSO.CopyFile oUtility.ScriptDir & "\Installer\mozilla.cfg", oENV("ProgramFiles(x86)") & "\Mozilla Firefox\", True
    oFSO.CopyFile oUtility.ScriptDir & "\Installer\local-settings.js", oENV("ProgramFiles(x86)") & "\Mozilla Firefox\Defaults\Pref\", True
    End If
    ' Enable Zone Checks
    oLogging.CreateEntry "Install-MozillaFirefox: Return code from command = " & iRetVal, LogTypeInfo
    oLogging.CreateEntry "Install-MozillaFirefox: Finished Mozilla Firefox installation", LogTypeInfo
    End Function
    You can then use variables. Your code to copy files could be something like
    oFSO.CopyFile oUtility.ScriptDir & "\A\*.*", oENV("SystemDrive") & "\temp\BlahBlahA", True
    oFSO.CopyFile oUtility.ScriptDir & "\B\*.*", oENV("SystemDrive") & "\temp\BlahBlahB", True
    If this post is helpful please vote it as Helpful or click Mark for answer.

  • Receive: "Add Profile Failure: Invalid Profile XML" error when adding WWAN profile - Windows 7

    I'm trying to import below XML profile to Windows 7 machine and no matter what profile i use (even the one it was on that computer originally it gives me an error.
    netsh mbn add profile interface="Mobile Broadband Connection" name="test.xml"
    test.xml is in c:\temp folder.
    <MBNProfile xmlns="">
    Tried these steps:
    - configured the setting using UI and test connection - it worked.
    - copied that profile from path: C:\ProgramData\Microsoft\WwanSvc\Profiles to
    c:\temp and renamed it to test.xml
    - closed the connection and run command: netsh mbn delete profile interface="Mobile Broadband Connection" name=TestProfile
    - and then tried to add the profile under changed name (no profile changes made): netsh mbn add profile interface="Mobile Broadband Connection" name="test.xml"
    - received very nice message: Add Profile Failure: Invalid Profile XML
    I'm stuck, help?

    Got an answer. It required some debugging, but I end up finding it.
    When you add that profile, system executes a function which compares Subscription ID tag with the one it has in system already. If one is already there then overwrites the profile, if NULL adds the profile. Problem is, as soon as any of
    the profiles are configured manually to redistribute later, the Subscription ID tag is encoded. And window doesn't know how to decode it, so it fires an error. 
    The Subscription tag is an IMSI number, when you right click it on your connection and go to properties, you will see it there, 15 digits. Copy it and paste it to the XML file replacing encoded number.
    It works as a charm.
    I leave deployment methods to you... :)
    Not so happy to answer my own question, but what a heck... glad to help even one person :)

  • Add mobile broadband profile using netsh gives "Invalid Profile XML" error

    We're trying to create an automated installation to upgrade to 8.1 Pro soon and since we have our own APN at our provider, we'd like to add this using a script. However when I try to add my XML profile using
    netsh mbn add profile interface="Mobile broadband" name="profile.xml"
    I receive the following error: Add Profile Failure: Invalid Profile XML.
    I've found some Windows 7 topics regarding this issue, pointing at the encoded Subscriber and ICC id's in these XML files. I have already found the unencoded values with
    netsh mbn show ready * and added them to the XML file, but still no dice :-(
    This is my XML file:
    <?xml version="1.0"?><MBNProfile xmlns="">
    <Name>My Company Name</Name>
    <HomeProviderName>vodafone NL</HomeProviderName>
    <DisplayProviderName xmlns="">My Company Name</DisplayProviderName>
    I've removed all existing mobile broadband profiles from the system, netsh mbn show profiles
    shows an empty list so it's not a naming issue. I tried removing the XML version header from the file (a lot of examples of these XML files don't have it), leaving the Subscriber and/or ICC ID empty, removed them from the XML file but nothing seems to
    Does anyone have some other suggestions?

    I'm sorry for have no idea with your problem. Since those methods you tried but failed, in my opinion, it would be better to use Process Monitor to capture the trace of excuting this XML file.
    Start Process Monitor, close as much unrelated process as possible, then run command to enable this XML file.
    After error occures, stop capture.
    Process Monitor:
    Roger Lu
    TechNet Community Support

  • [svn] 2716: SDK-15848 - Conditional compilation constants defined in flex-config. xml are never used if a single constant is specified on the command line

    Revision: 2716
    Author: [email protected]
    Date: 2008-08-04 01:18:12 -0700 (Mon, 04 Aug 2008)
    Log Message:
    SDK-15848 - Conditional compilation constants defined in flex-config.xml are never used if a single constant is specified on the command line
    * There's a possibility this will break a conditional complication test which disallows overwriting an existing definition -- I don't know if that will break the build, but the test should be removed either way.
    * Using append syntax ("-define+=" on the command line or ant tasks, or append="true" in flex-config) and redefining a value works now if you use an already-defined namespace and name.
    * So your flex-config may have -define=CONFIG::debug,false, and you may want -define+=CONFIG::debug,true from the commandline build, or FB build.
    * Made the ASC ConfigVar fields final as a sanity check since overwriting is now allowed. It would be harder to track changes and subtle bugs if they were mutable. This means that you must build a new ConfigVar object if you need to make changes.
    Bugs: SDK-15848
    QA: Yes. Please read the updated javadocs in CompilerConfiguration. Tests need to be added to validate that overwriting is allowed, and happens correctly in different situations: I believe the order should be that flex-config is overwritten by a custom config (can we have more than one user config? is the order deterministic? I forget...), is overwritten by commandline or OEM. Did I miss any? (I didn't write code which changes this, it works however the existing configuration system allows overwriting and appending; if we have tests for that, maybe we don't need them duplicated for this feature.)
    Doc: Yes. Please read the updated javadocs in CompilerConfiguration.
    Reviewer: Pete
    Ticket Links:
    Modified Paths:

    Please note: I AM USING:
    JkOptions ForwardKeySize ForwardURICompat -ForwardDirectories
    And that's what's supposed to fix this problem in the first place, right??

  • Final Cut Export XML: Command-line option

    Is there a way to use a command-line function to automatically export the XML for a Final Cut (.fcp) file ? We need to see the clips that make up a .fcp file, and do reporting. Since we have thousands of these files, we need to automatically create the XML files without opening each file automatically.

    Hey Ani_,
    I've been working with Adobe products for a long time and typically when you come across an error that has anything to do with a XML file export problem its due to things such as effects you may have added in, color corrections, cross fades or any type of video transitions between clips. Remember your work flow should be
    Import your footage into Premiere Pro
    Name your clips (helps find things later on)
    Place clips on time line in the order you wish (ONLY MAKE CUTS don't add anything, transitions color effects nothing)
    Then once your clips are all placed on the timeline in your correct order you then EXPORT> Final Cut Pro XML
    Now you can bring this into other programs for color grading or whatever else your going to do.  You will notice you have no errors on the export.
    Once your done doing what your doing to the clips in another program (for example: Divinci Resolve color grading) you can then export them back to your main project then add your effects and transitions.

  • Adding properties to XML Registry

    I'm using WLS 6.0. I was wondering if it is possible
    to add more properties into the XML Registry on the console.
    The two properties currently there are: DocumentBuilderFactory
    and SaxParserFactory.
    I'd like to add the two system properties: javax.xml.transform.TransformerFactory
    and org.xml.sax.driver.
    I know I can set these from the command line using the
    -D option but I'd much rather have the configuration
    in the console.
    Can I do this? If so, how?

    Follow-up: Even though it lists 4 missing required properties in the error, when I went back and added only the Value property, the red flags went away....
    Werry Interestink!

Maybe you are looking for

  • At new statement for Summary report

    Hi,   I have made a vendor balance report having debit and credit entry in on eintrenal table IT_BSIK, with all line item detail in another table IT_TAB1  i want to make summry report by adding all the amount of of line item it is also working fine 

  • How to disaply multiple column of a table in a single flex datagrid column

    Hi, I have a table in my database which has say 3 column (Firstname,LastName,Location). I wanted to display these 3 different values in a single column in flex datagrid. Could you please help me out in this Thanks, Pratik

  • Scientific fluorescence figures are not displayed correctly on iPad

    I use the iPad 1 for reading scientific papers, and I figured out that some fluorescence figures are not displayed correctly. The colours are not correctly distinguished, even some colours are completely missing. Is this a limitation of the iPad disp

  • Should I use the Amplify HUD to reduce peaks in WaveForm

    I am using Audition CS6 on a Windows PC. I bring a mono .wav file of voice and audience sound into the waveform editor. I am attempting to reduce the level of spikes before using the Hard Limiter to increase the overall volume. I select a number of c

  • Cluster design

              my requirements:           host1: webapp1, webapp2           host2: webapp2, webapp3           host3: webapp3, webapp1           cluster1: host1, host2(for webapp2)           cluster2: host2, host3(for webapp3)           cluster3: host3, ho