Additional Field(customized) in G/L acct bal line item display FS10N-FBL3N

Steps done:
1st: I appended an extra field(customized) to RFPOS and RFPOSX structures.
2nd: Went to FIBF and looked for BTE applicable and found sample_interface_00001650. (Line item display: Add data per line)
3rd. I copied sample_interface_00001650 with a name of zsample_interface_00001650 and added line of codes for selection to fill the extra field I added.
4th. I assigned the event found in FIBF=>Environment=>P/S Modules=>of a SAP application.
5th. I executed RFPOSXEXTEND program in SE38. After running, RFPOSXEXT was updated but not RFPOSEXT.
I run FS10N and check for the field I added if existing. The extra field is existing however when I tried to move the field to the columns to be displayed in ALV, I got an error saying that there are inconsistencies in table T021S and RFPOSEXT.
Please help. Thanks.
Is there a certain program needed to update RFPOSEXT just like RFPOSXEXTEND for RFPOSXEXT?

Hi ,
Actually when i do FS10N or FBL3N to see G/L Account Line Item Display i am able to see the display of the G/L Account but there is a coloumn under Assignment and it shows no entries i.e. Assignment coloumn is blank.What should i do so that i get entries for assignment field because there are entries made in Assignment field.Table is BSEG and the field is ZUONR.How do i get these entries in the G/L Account Line item display for G/L Account using FS10N ?
Thanks
Vivek

Similar Messages

Populate Assignment Field in G/L line item display (FS10N/FBL3N)

Hi All,
I am using FS10N to see G/L Account Line Item Display.
I am seeing the Report Display with Coloumns like Doc.No., Type,Doc.Date,Amount in Local Currency etc etc
There is coloumn showing Assignment.The entries are not getting populated/displayed under the same coloumn of Assignment
When I go to Change Layout I see th Assignment field but the nothing is getting dislayed under the Assignment coloumn when I run FS10N/FBL3N.
How do I solve the above problem?
Thanks
Vivek
Edited by: VIVEK KAPOOR on Dec 11, 2009 4:11 PM

Hi ,
Actually when i do FS10N or FBL3N to see G/L Account Line Item Display i am able to see the display of the G/L Account but there is a coloumn under Assignment and it shows no entries i.e. Assignment coloumn is blank.What should i do so that i get entries for assignment field because there are entries made in Assignment field.Table is BSEG and the field is ZUONR.How do i get these entries in the G/L Account Line item display for G/L Account using FS10N ?
Thanks
Vivek

Customer number needed in "GL a/c line item display" for customer gl?

Hi SAP Experts,
while running GL account line item display in FBL3N,customer number is not displaying against the gl accounts relating to customer reconcilation account or the gls relating to the customer line item entry.my clients need that in either ASSIGNMENT field(where presently showing the document entry date as defult) or in a different column.for that he even does not want to write any report.
How can i solve this problem?
Plz guide me.
I need a quick response.
Regards,
Biswa

Hi,
Check If you are using the G/L account which is the reconciliation account for your customer, then it is possible to display the special field1-U_KUNNR and it is ALSO possible to add Sort Key 031 into the Assignment field of that account in FS00 tab Control Data and therefore to display your 'Customer no.' in the Assigment field in FBL3N.
If you are using the G/L account which is the offsetting entry or the other side of the posting, then it is NOT possible to display your 'Customer no.' neither in the Assignment field, nor adding the
special field 1-U_KUNNR to the display. At this stage, notes 112312 and 217189 may be of use, which enable you to use a Business Transaction Event to populate offsetting account information.
I hope these helps.
Regards
Ravinagh Boni

Additional fields for line item display for Vendor Accounts

Hi,
The additional fields for line item display have been defined for the vendor accounts. I am able to see the additional fields in SAP 4.7 system but not in ECC 6.0.
Could you help me to know how the same will be displayed in ECC 6.0 system.
Thanks

In SPRO, Vendor Accounts -> Line Items -> Display Line Items -> Define Additional fields for Line item display, the fields for Check number from (PAYR-CHECF) and Tax Jurisdiction (BSEG-TXJCD) have been defined.
When I am executing Vendor Line Item display (FBL1N), I am not able to select these fields for defining a layout. Could you please let me know, how I will get these fields in FBL1N.
Thanks

Define Additional Fields for Line Item Display

Dear gurus,
I'd like to ask for your help again, please. I've just added the field BKPF-USNAM to the list of fields of FBL1N using IMG:" Financial Accounting-> Accounts Receivable and Accounts Payable->Vendor Accounts->Line Items-> Display Line Items->Define Additional Fields for Line Item Display". When I run the report the field is correctly displayed but if I save the current layout and set it into the selection screen, the column appears is blank. And if I open the change layout window and click OK the column gets filled.
Is there another transaction that I must set new columns to FBL1N.
Thank you very much.
Paresh Jivani
Edited by: Jivani Paresh on Jul 31, 2009 9:16 AM

Hii,
When you will execute FBL1N, it will come up in standard format. if you want to see any specific fields,then you have to go to Change Layout button and choose from available fields as per your requirement and then execute.
For future reference, you can save this layout as a Variant and then you can directly execute that report using that variant.
Dhara D.

Additional Field to line item display

Hello Everyone
I want to add two additional field ( date of entry and entry time) to GL Line item display.Can any body please share.
Looking forward to hear from all of you.

First try to determine if there are any user exits (screen exits actually) or BADI's which can do this.
For finding the relevant user exits, determine the transaction code first and search on SDN for the report in which you enter the transaction code, and which will return all user exits for this transaction.
For BAdI's there is also a program to be found on SDN.
Next read the documentation of these user exits / BAdI's and you will be on your way.

Add additional items to line item display? (FBL1N, FBL5N)

Hello everyone,
I'm trying to add some "custom fields" to Customer/Vendor line item display
which is only available in BSEG table. (new GL function)
I could not find any BAdI or something..
Is there any way to do this?
thank you in advance for any comments.

Hi,
     Try with this Menu enhancements,
FI_ITEMS_MENUE01                                          Menu Enhancement
FI_ITEMS_MENUE02                                          Menu Enhancement
For the created Menu item, under that function code write the logic to get the additional data.
Regards
Bala Krishna

RSBBS Jump: AR Line Item Query to R3 Customer Line Item Display

I am attempting to create a 'Jump Target' from the 0FIAR_C03 AR Line Item Infocube to the R3 FBL5N Customer Line Item Display transaction.
The query that the jump is to be performed from an Aging query.
The user will be running this query for all transactions posted up to and including the end of the previous calendar month. The posting date is provided by the user when submitting the query (via variable 0P_KEYD2). The aging report works just fine.
Where I'm having the problem is when the user wishes to jump to the R3 transaction FBL5N to display the Customer Line Items. The user wants the 'Line Item Selection' in R3 to inlcude 'Open Items' (this button should be selected -- it is the default setting) where 'Open at Key Date' is to be derived from the query result in the Excel workbook.
I have created the RSBBS Sender/Receiver Assignment so that it goes and retrieves the line items from R3 for the correct customer. However, I have not been able to figure out how to populate the 'Open at Key Date' with the end Posting Date (OPSTNG_DATE) from the query.
I've tried every combination I can imagine in the 'Assignment Details' section in RSBBS, but so far I have not been able to make it work.
Has anyone else out there tried this?
If you have, were you able to populate the 'Open at Key Date' (ALLGSTID) field in the R3 FBL5N transaction? If you were able to do this, how did you do it?
All ideas appreciated . . .

I'm still hoping that someone can help with this issue.
Here's a repeat of the original question:
I am attempting to create a 'Jump Target' from the 0FIAR_C03 AR Line Item Infocube to the R3 FBL5N Customer Line Item Display transaction.
The query that the jump is to be performed from an Aging query.
The user will be running this query for all transactions posted up to and including the end of the previous calendar month. The posting date is provided by the user when submitting the query (via variable 0P_KEYD2). The aging report works just fine.
Where I'm having the problem is when the user wishes to jump to the R3 transaction FBL5N to display the Customer Line Items. The user wants the 'Line Item Selection' in R3 to inlcude 'Open Items' (this button should be selected -- it is the default setting) where 'Open at Key Date' is to be derived from the query result in the Excel workbook.
I have created the RSBBS Sender/Receiver Assignment so that it goes and retrieves the line items from R3 for the correct customer. However, I have not been able to figure out how to populate the 'Open at Key Date' with the end Posting Date (OPSTNG_DATE) from the query.
I've tried every combination I can imagine in the 'Assignment Details' section in RSBBS, but so far I have not been able to make it work.
Has anyone else out there tried this?
If you have, were you able to populate the 'Open at Key Date' (ALLGSTID) field in the R3 FBL5N transaction? If you were able to do this, how did you do it?
All ideas appreciated . . .

Vendor Line Item Display-Default value for customer items

Is it possible in selection screen of transaction FBL1N (Vendor line item display) the default value of field "customer items" to be checked?
Thanks in advance.

hi Tsiami
it's not possible. if u want check customer line items go throw this TC:FBL5N
plz assign points
regards
sivareddy.

Reg fbl5n customer line item display

I n FBL5n report wbs element field value is not displaying
When posting the invoice through FB70
wbs element field name PROJK
I have searched in SDN but any thread not related to this one
Suggest me how to display the value
Regards
Suri
Edited by: mannem suresh9 on Dec 23, 2011 7:06 PM

Hi
If you don't have available this field, you can enhance FBL5N list. Please, see the article [Offsetting Account Description in FBL3N & FAGLL03 u2013 GL Line Item Display Reports|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/8011026d-eb5d-2e10-b9bb-d0601949b86a?QuickLink=index&overridelayout=true] by Imran Mohammad Khan. K in this site.
I hope this helps you
Regards
Eduardo
PD: See also [Addition of Fields in Line Item Display Report Output for TCode FBL1N/FBL5N|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/40d6c489-aa3a-2e10-db88-deb9114b6854?QuickLink=index&overridelayout=true] by Swapnoneel Mukherjee.
Edited by: E_Hinojosa on Dec 27, 2011 9:37 AM

Adding fields in the transaction FS10N ( G/L Account LIne Item Display

Hi all,
in G/L Account Balance Display( FS10N) once i get list display when i click
CUMULATIVE DISPLAY button it will go to G/L Account LIne Item Display list
Here i have to add CUSTOMER field (sold to party or partner) And NAME field in
the list beside G/L account and company code fileds
Please let me know how to proceed.
shall i have to do any back ground setting or
i have to copy the program in to Z program
then modify?
urgent requirement
please let me know
thanks

Hi,
For writing a substitution exit code you will need the help of your ABAPer.
Use T Code GGB1 to create a substitution. In the application Area select Financial Accounting --> Line item.
Create a substitution for your company code. Under Substitution Create Step. When you click on step it will give you a list of fields in BSEG table. Select field name XREF1 or XREF2 or XREF3 any one. In the next screen select "Exit". In the Prerequisites give conditions as BKPF-BUKRS = 1000 (your company code).
In the Substitution select your exit code against your XREF1 or XREF2 or XREF3 field.
While writing the exit code you can give the logic as select BSEG-KUNNR and pass to table KNA1. Then populate BSEG-XREF1 with KNA1-NAME1
Save this substitution and activate it in T Code "OBBH"
While writing Substitution exit copy the standard program "RGGBS000" and create your Z program. Write your new code in the Z program. This step should be done before you create a substitution. Use T Code GCX2 and maintain your Z program against Application Area "GBLS".
Also see to it that the Reference Key1 / 2 / 3 field is made optional in all the Posting Keys and Field Status Groups.
Please let me know whether this helps.
Regards,
Swapnil

Vendor Line Item display/ and Purchase order Field

FI Experts
We recently implemented the MM PO module in SAP, we are creating PO's automatically in SAp from a 3 party system. We are using field "Our Field" EKKO-UNSEZ to enter a reference from the 3rd party system. Our account payable have requested that they need this field to display in FBL1N "Vendor Line Item Display". I tried by using special fields but table is not available. Anyone has any suggestions? I know I can use BSEG and EKKO but it is too big of a table to use. Does this requires more of an ABAP report rather than just a simple QUERY report?
Your suggestions are appreciated.

Hi,
PO Nr. doesn't appear in Vendor line item, but yes, in GRIR account.
So when are you performing MIRO, you may use XREF3 field, which usually remains blank, through user exit (OBBH) for populating PO Nr. But yes, if you are processing MIRO of multiple POs, you may not be able to set multiple values.
BR

T code for vendor,customer line item display

we are using ecc 6.
I would like to know the wheter any tcode is available in ECC6 for cust and vendor line item display.
NEW TCODE for FBL3N is FAGLL03. Like that any new new tcode is availbale for FBL1N & FBL5N?
Please clarify.
Thanks
Rajesh

Dear Rajesh,
There are not direct 'replacement' as the FAGLL03->FBL3N for FBL1N and FBL5N.
So the FBL1N and FBL5N can be used further without any problem.
As stated before, only the G/L are has directly changed.
But in the relation to the New G/L, there are two new 'Recherche' tools for the vendor and customer area in relation to the 'Segment' and 'Profit Center'.
You can find them in the FGI0 transaction.
They are called:
0SAPRECIEV01
0SAPRECIEV02
0SAPPAYABL01
0SAPPAYABL02
Maybe they can also help you further.
Best regards,
Christoph

Display Field "Purchasing Doc No" & "Vendor" in GL Line item of FAGL003 rep

Dear Experts,
To display of Purchasing Doc No (EBELN) & Vendor(LIFNR) in GL line item of FAGLL03 report we have added both the field in the customization setting of Special Fields in GL Line Item using the following path:-
Financial Accounting(New)
     General Ledger Accounting(New)
        Master Data
           G/L Accounts
              Line Items
                Define Special Fields for Line Item Display
After the request got transported to quality client the fields Purchasing Doc No (EBELN) & Vendor(LIFNR) disappears from the lay out list of FAGLL03 report.
All the screen shots are furnished in the attached file.
Please advise.
Regards,
Alok Parida
FI Core Team

Hi Seetaramaiah,
Please regenerate structure according to following steps.
Call transaction SE37, enter the function module ITEM_STRUC_EXTENSION and
execute it with the following parameters:
BASIC_STRUCNAME: FAGLPOSY
EXT_STRUCNAME: FAGLPOSYEXT
EXT_FIELDS_TABNAME: T021S
I_LSTCL: D
X_TRANSPORT: ' '
Regards,
Joseph

Customer line item display

Hi All,
I have a Credit Invoice which is open on VF03, but when I went to FBL5N customer line item display, I gave customer num and checked all open items, it is not there. Can someone please help me why it is not showing up in FBL5N.
Thanks,
Veni.

Hi All,
I have a Credit Invoice which is open on VF03, but when I went to FBL5N customer line item display, I gave customer num and checked all open items, it is not there. Can someone please help me why it is not showing up in FBL5N.
Thanks,
Veni.

Additional Field(customized) in G/L acct bal line item display FS10N-FBL3N

Similar Messages

Maybe you are looking for