Additional field in MSS Leave Application

hi,
In standard Leave application the leave request is sent to a person and he approves, i need a two step approval, so here are my questions,
is it possible to add additional fields in the portal application for leave which is a standard. are there anyways to do this.
secondly i think i have to make a new workflow am i right?

File WorklistappConstants.java has the list of columns to display, almost at the end.
Add your text attribute here, e.g.
USER_PREF_DEFAULTS.put(PARAM_USER_PREF_INBOX_COL+"8",
WFTaskConstants.TEXTATTRIBUTE1_COLUMN);
This works for other columns, like WFTaskConstants.ASSIGNEEGROUPS_COLUMN,
but I'm currently struggling with WFTaskConstants.TEXTATTRIBUTE3_COLUMN.
Even if this is the only change I make, the WorklistApp crashes in my environment.

Similar Messages

ESS leave request, additional field

I need to add three additional fields in ESS leave request (HR). I was told i can do that using web dynpro. I like to know how can I do it.
Thanks

hi Jeroen,
Can u please help me with my issue.......
My issue is to add new fields in ess/leave request i.e...
The component needs to be Checked-out through Net Weaver Development Infrastructure, make the necessary enhancements, and finally Check-it-in back to NWDI.
Custom Function Modules are to be invoked apart from the standard ones that are already available in the Leave Request component ess~lea inorder to accommodate the extra absence-type logic.
can u please sujjest me where should i make changes in the given 14 components
means in which view i have to add these fields.................

Adding Additional Columns in ESS Leave Request iview ( EP 7.0)

Hi,
I have a requirement to add some additional fields to the Leave Request Iview. Can any one suggest me the best possible solution to add the fields 'Processed by' and 'Approved Date' to the iview?
Thanks in Advance,
VR.

Hi,
You can personalize Web Dynpro iViews. I have explained this in another topic (2nd post) : [Re: Remove colums in WD MSS teamviewer].
And the wiki contains useful information : [ESS Personal Information UI enhancement without modification|http://wiki.sdn.sap.com/wiki/display/profile/ESSPersonalInformationUIenhancementwithoutmodification].
If it is the Universal Work List iView you want to modify, you'll have to modify the UWL configuration.
Regards,
Pierre

Leave Request - Additional Fields

Hi,
I wanted to add two additional fields for a particular leave type.
i can add one field in the Field Selection for Additional Data
but how to add another field for the same leave type.
kindly show some light.
thanks
sera

this is done in two steps
There is DEFINE FIELD SELECTIION
Sm34 > VV_PT_FLDSEL_NAM
Ptarq> Customising> Service Specific Settings > Workinmg time >
layout of Web application > Define Field Selection
Add this to the absence type of your rule group.
You can add how many fields you want to the absent type

How do you add additional fields in infotypes?i want to leave blank space

how do you add additional fields in infotypes?i want to leave blank space in front of the field?

Hi,
To add new fields go to PM01 and select Enhance Infotype option and then follow the steps in sequence.
I am not getting blank space in front of the field. please elaborate it.
Regards,
Raja.D

[ OIM 11gR2 PS1 ]How to add additional field on Application Instance Form ?

Hi,
In our scenario we have Disconnected applications in OIM. AI (Application Instance) form and PD editing is created by OIM.
We want to add additional field in AI form.It is visible in back end. But,its not visible in OIM admin console for admin and as well for end user.
Is there any property related to form field in AI ,where we need to make changes to make it visible ?
Instance used is OIM 11gR2 PS1
Thanks,
RPB
Edited by: RPB25 on May 29, 2013 9:46 PM

I was able to resolve this issue . we need to click on "regenerate view".

Additional field in standard MSS iView

Hello all,
We have created a new custom infotype (IT9915) in which we intend to hold some disability information.
We would like to display one of this infotypes fields within MSS in the 'Employee Profile' page, 'General Data' iView.
I have little JSP development knowledge but I can find and read the JSP program for this iView.
Within the code I can see that you can extract field values from a call to a 'Resource Bundle' component request.
My question is:
Where and how do I add code so that the field (eg PA9915-DISABILITY) is added to the resource bundle and enable me to subsequently reference and extract it within the 'General Data' iView program?
Many thanks in advance,
Keiron.

Hi
U can create a new table view like V_TKZU3_CO, insert your new fields and create the maintenance view program for it.
Max

WorkManager 6 - Additional fields do not get deleted

Hi,
I have an issue with WorkManager 6.0 Enhancement.
I have added custom fields to the Workorder object. To do this, I have created a ZWORKORDER class that handles these fields with its setter and getter methods and have as well created ZBAPI and ZSTEPLET classes and configured these in the config panel.
We have added a new structure to the workorder as well.
Downloading the information works fine - it is displayed properly and all data if handeled correctly.
If I now delete the workorder form the device with a sync, it seem to work fine as well - until the last workorder is removed.
If there are no workorders left, it will display text of the last order on the screen in the first tab. Some of the fields I did add are filled and the description if filled as well. The complete rest of this item is empty.
In my finding the additional structure is removed and if I enter the Agentry Test Environment the data is gone there as well. So there is no workorder left or anything like.
So my question: what do I have to do to remove the additional fields and clear them correctly? Do I need to change the REMOVE Bapi and Steplet or have I done wrong something else?
Is there a guide around so I could compare if I did something wrong?
I implemented my own ZRemove classes to be able to debug, but even that did no throw any more light on it.
Thanx a lot for your help.
Oliver
Tags edited by: Michael Appleby

Oliver,
This is a bug in the Workmanager application. Specifically, a bug in the Agentry platform when it attempts to clean up a Tile Display control after there are no longer any objects because of a deletion. I have run into the scenario you are describing on another project. You aren't doing anything wrong, but need to use some trickery to correct this. If it is just the main detail screen that wont clean up, add another copy of the detail screen to that screenset, call it DetailEmpty or something like that. Leave all the fields positioned as they should be, but remove all the object mappings and update rules on the fields so they never display anything. Next add an enable rule on the new screen that checks to see if the COUNT of the workorders collection equals zero. Put the opposite enable rule on the original detail screen that checks if workorder count > 0. That way only one or the other screen will ever be displayed, and when there are no workorders, you will see blank fields. This workaround is required until Agentry can correct the platform defect.
Jason Latko - Senior Product Developer at SAP

Populate cost centre in IT 2001 via Leave application submitted through ESS

Gurus,
we have a scenario to populate CC in "Cost Assignment" Tab of IT 2001, when a leave is submitted via ESS. Now we have enabled the additional fileds on ESS and when leave application iView is opened, the CC field is displayed and is defaulted with a CC through an User Exit. But when this leave is approved and posted to IT 2001, the Cost Assignment tab is not populated. However the CC value is very much available in the intermediate table "ptarq_extra_info".
Basically, the CC to be stored in table ASSOB ASSHR.
Many thanks.
Sid

Gurus,
we have a scenario to populate CC in "Cost Assignment" Tab of IT 2001, when a leave is submitted via ESS. Now we have enabled the additional fileds on ESS and when leave application iView is opened, the CC field is displayed and is defaulted with a CC through an User Exit. But when this leave is approved and posted to IT 2001, the Cost Assignment tab is not populated. However the CC value is very much available in the intermediate table "ptarq_extra_info".
Basically, the CC to be stored in table ASSOB ASSHR.
Many thanks.
Sid

Additional field in adhoc query

Hi all, I need to be able to report on the IT105 subtype 0001 system ID for employees who are withdrawn from the company, however, when someone leaves their IT105 record is delimited so adhoc query will not output anything. Has anyone coded an additional field that will look at the latest record regardless of the date?
If you have, please can you share the code with me!?
Many thanks!

Hi Tanya ,
Please find the code below. It is designed for additional structure z105_last which is bassed on P0105 type.
data l_it_p0105 type standard table of p0105.
clear: l_it_p0105, z105_last.
call function 'HR_READ_SUBTYPE'
exporting
    tclas                 = 'A'
    pernr                 = peras-pernr
    infty                 = '0105'
    subty                 = '0001'
    begda                 = '18000101'
    endda                 = pn-endda
tables
    infty_tab             = l_it_p0105
exceptions
    others                = 1.
if sy-subrc = 0.
describe table l_it_p0105.
read table l_it_p0105 into z105_last index sy-tfill.
endif.
Regards,
Sergey

Adding additional field in cProject is not working after transporting

Hi All,
My intention is to add additional field in cProject. So i copied a required view through program BSP_CUSTOMIZE and into another Z* BSP Application object. Then i had done the necessary modification on the view and saved. Then copied error.do controller and actived and tested in development server. It was working fine. So i moved the transport request for this object to quality system. When i tried to test the same thing in quality system, changes done in views are not reflecting.
When i checked the entries in table BSP_APPLC, i didnt find any. I hope this is the reason why my changes in views are not reflected.
Can anyone have idea, why it is not happening so. Kindly help.
Thanks in advance.
Regards,
Karthick

Ensure that in table BSP_APPLC is an entry for cprojects linking to your own aplictaion Zcprojects and is activated.
I guess you have to reactivate the BSP_CUSTOMIZE in target system again.
Please remeber: BSP_CUSTOMIZE is not supported officially.

Additional field in infotype 0009 issue ( PBO and PAI )

Hi Guru,
I need your help please.
I have a additional field in IT0009 and when I want created a new infotype 0009, I fill all field but after ENTER or SAVE all field are save in the layout but not the additional field.
To save the additional field in the layout, I must fill it again and after the ENTER or SAVE the field is save in the layout.
I have checked in the debbugger, when I create a new infotype 0009 it goes to the PBO but after ENTER or SAVE it doesn't go to the PAI so I must do it again ( fill the additional field and ENTER or SAVE ) and then it goes to the PAI.
Thus I would like to know how I can make so that after the ENTER or SAVE the screen goes in PAI before the PBO and at the first time.
Thanks very much in advance.
Regards.

Hi Srini Vas, hi Pedro Guarita and thanks for your reply,
After more investigation, the probleme come from a check over country bank.
In fact, the screen of the infotype 0009 must be adpated following the country bank but to do this, the standard module pool (mp000900) check if the country bank have changed.
call method cl_hrpad00_iban=>process_iban_pai
      changing
        cs_bankdata = ls_bank_data_current
      exceptions
        error_iban = 1
        others      = 2.
    if sy-subrc <> 0.
      message id sy-msgid type sy-msgty number sy-msgno
                 with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    endif.
    call method cl_hrpad00_iban=>get_bank_data_old
      importing
        bank_data_old = ls_bank_data_old.
    if ls_bank_data_current-banks <> ls_bank_data_old-banks. "MELN1357200
bank country changed -> leave screen needs to be done
      leave_screen = 'X'.
    endif.
But when you create a new infotype 0009, the ls_bank_data_old-banks is always initial. So when module pool compared the ls_bank_data_old-banks with the ls_bank_data_current-banks, those are always different.
In conclusion, when you create a new infotype 0009 it is always mandatory to push ENTER before to fill any additional field because at each first time that the standard module pool go in the PAI, it make a leave screen.
Thanks in advance for all yours reply.

Additional Fields in Organizational Assignment Info type

Can we add additional fields in an organizational info type?

Yes you can add new fields in the standard info types also.
Through transaction PM01 can you specify that additional field is standard field or customized field. if it standard you can do with the help of screen modifier. if it is custom then use PM01.
if it is custom field, this will help you:
Additional fields on Infotypes form of MasterData application
if standard field, check this:
How to add a new field using PM01 Transaction
Best Regards,
praneeth kumar

Additional field Profit Centre for vendor and customer

Hi All,
We have created a web Dynpro application for posting documents for one of our client. The application is designed to park the document and has various level of approval before it is posted.
The issue we are facing now is that they have done a screen enhancement for the customer and vendor line item where they included an additional field for profit centre for cross profit centre posting, which could be only posted directly.
Since the Web Dynpro application is designed to park and post we are unable to store the profit centre value passed in the customer or vendor line items. Someone please let me know if we could store the value temporarily till the document is posted. We do not have profit centre field in the standard table for the vendor or the customer.
Regards,
Prashanth

The Trading partner field in customer and Vendor master is used to identify the affiliated companies involved in intercompany transactions.
The trading partner field is copied into the account receivable and payable transactions from the customer and vendor master. The Trading partner field also appears in the line items of the offsetting clearing accounts via substitutons.
The trading partner field subsequently can be used during consolidation to eliminate intercompany receivables and payables from the balance sheet and eliminate Intercompany sales and expense figures from the P&L statement.
Customer or vendor invoice: Trading partner information is captured from the customer and vendor master.
Invoice receipts against clearing account and transfers with clearing: While posting Invoice receipt during an Intercompany transaction, the invoice receipt can be posted to a clearing account instead of expense account. The selection of open items must be restricted to those with a certain trading partner when posting a transfer later on, as the trading partner is copied into the transfer line item.
Customer and Vendor Payments: If document types for payments are configured to allow for more than one trading partner in a payment document then the trading partner is copied only on the customer and vendor line item and not on the offsetting entry.
Assets transferred between company codes: If an asset is transferred between group company codes, two accounting documents are generated in each of the involved company codes. The trading partner of each document must be set to the company id of the other company code.
When goods are received from group company code the trading partner is picked for the inventory and GR/IR line items from the vendor mentioned on the order. If invoices are open as on the balance key date then group-internal provisions are created from the GR/IR accounts. These provisions can later be eliminated in Consolidation system.
Regards,
Gaurav

E-recruiting: Additional field on cover letter screen

Hi!
I want to add a checkbox input field on the application screen in
e-recruiting above the cover letter. I found the actual BSP
(coverletter_v.bsp of HRRCF_REG_APPLN) and added the field.
I am not sure where the best place to put the new database checkbox field
but I am biased towards an append on table HRP5136 (Correspondence)
associated with the registration of an application(OTYPE = 'ND' and
ACT_TYPE= '1020', '1030' and '1035').
Could someone advise me what kind of objects and methods I
should/need to change in order to implement this completely and also why
don't external breakpoints take effect(I tried several places in the controller methods associated with a cover letter)? Is there a customizing that have to be set in order to get the effect of setting breakpoints?
In my case, as far as I understand there is no possibility to add an extra field in
a predefined user-exit, but rather one has to change SAP standard. Is
that right?
The reason why we need an additional field is that an
applicant may choose to appear as anonymous in the list of all
applicants and in that case (s)he needs to tick off the new checkbox
field. I did not find a suitable solution for this in SAP standard
e-recruiting system.
In advance, thanks for any guidance and help on this issue!

Hi,
As of now, the custom fields automatically being displayed on screen is available only with BSP.
The WDA screens are available for extrenal & internal candidates. You can craete your Z fields in cutomer include in the respective infotypes. The WDA developer will ahve to explicitly put the UI elements on the relevant screens & map them to these Z fields. We had a similar requirement & we have done this in this way.
Regards,
Sowmya

Additional field in MSS Leave Application

Similar Messages

Maybe you are looking for