Address Book Updation Application runs successufully but problem in runing
Hi all,
I develop a small application which updates the contact numbers from the Adress Book. and for that i use PIM API....
i sotre some number in following folder
appdb\DefaultColorPhone\pim\contacts\Contacts
now when i run my application it successfully updates all number..
but when i try this application on Nokia 7360 the application is install correctly and run also correclty but it does not updates any number...
I use Infrared to transfer the application from my PC to Mobile....
And i also check the PIM suport in the device ..The device support the PIM 1.0
I can not able to find the problem ....Can any one help me to solve the problem?.....
with regards
Pravin
Could you please check the Sharing &permissions of these two folders (command +I). Check to see if you have "Read&Write access to these folders. It should be your user name with read&write privileges.
You will have to open the lock on the bottom right and it will request the admin password. Should your name not be there, select it by clicking on the plus sign on the bottom right and selecting your user name. Select Read&Write privilege and under the gear wheel beside the plus and minus signs,Make sure you apply to enclosed items.
It sounds like you somehow got them buggered. Rebuilding the permission table should of cleared up the problem. This could be a case of booting with your install DVD and rebuilding permissions from there.
Food for thought.
Next time you even think of modifying anything in you user library, Duplicate the whole folder and then you have a reference to go by. Just make sure that it is deleted after you are finished. This should be a standard step when troubleshooting. Changing something.....make a copy.
Similar Messages
-
Constant Contact + Address Book Exporter application
Since installing Snow Leopard and Quickbooks 2010 (and turning back on Sync in QB) my Address Book Exporter application will not export names and email addresses without all having errors. Can no longer import them. Any suggestions and thank you.
Be sure you are looking in the right place:
/Home/Library/Application Support/AddressBook/. It's a folder, not a file, and it's located in your Home folder's Library. -
My 27" 2010 iMac has recently began freezing and movement on the display is molasses slow. We have 500 gigabytes available and no applications running and the problems still persist. Any advice?
IF your system is running extremely slow with no applications running other than Finder then I'd suspect a failing HD or you have a runaway process somewhere. Open Activity Monitor (Applications - Utilities - Activity Monitor) and look to see if you have any applications taking a large %CPU, if you do that is your problem. To test the HD run Apple Hardware Test, please read:
http://support.apple.com/kb/HT1509
to learn how to run AHT on your machine, also run it in EXTENDED MODE so it does the most complete test. If no errors are found after the first pass run it another 2-3 times to be thorough. -
Address Book missing from Running Applications
I run Address Book and "Open at Login". I'm running MacOS X Lion 10.7.4 and Address Book 6.1.2 on a MacBook Pro. I have just recently noticed that though the Dock shows the little blue indicator that Address Book is running and the Ctrl-TAB shows that Address Book is running, there is no way to bring up Address Book's Window. This started about a week or so ago.
Activity Monitor window also does not show the Address Book in the processes list regardless of the filtering.
Is there a new bug in Address Book?Hello:
I do not know of any Address Book "bugs," old or new.
You might try trashing a couple of preference files and restarting:
com.apple.addressbook.abd.plist
com.apple.addressbook.plist
com.apple.addressbooksourcesync.plist
If that does not help, try removing the application from your startup items, restart,and see if you can open the application.
Barry -
Address Book has been edited accidentally way back 09/2009. All Contacts merged into one, resulted to all contact information including names, phone numbers, e-mail address, notes, etc. rolled/merged into only one Contact Name. Worst part, never back up mac into time machine.
Any help will highly appreciated.I'm not sure if indexing the backup with Spotlight might solve the 'not seeing it' problem. Someone else would have to weigh in.
You can also dig through the folders in the backup. Once you dig into the folders, each backup is in a folder by date. You can go into those folders and see if there is a copy of the folder in there. -
Upgrade to Firefox 4.0 has caused nothing but problems. Unable to click links, access websites, etc. How can I downgrade to previous version?
Check that the Bookmarks Toolbar is visible and that the "Bookmarks Toolbar items" is still placed on the Bookmarks Toolbar.
If the menu bar is hidden then press F10 or hold down the Alt key, that should make the "Menu Bar" appear.
Make sure that toolbars like the "Navigation Toolbar" and the "Bookmarks Toolbar" are visible: "View > Toolbars"
* Open the Customize window via "View > Toolbars > Customize" or via "Firefox > Options > Toolbar Layout" (Linux, Windows)
* Check that the "Bookmarks Toolbar items" is on the Bookmarks Toolbar
* If the "Bookmarks Toolbar items" is not on the Bookmarks Toolbar then drag it back from the toolbar palette in the customize window to the Bookmarks Toolbar
* If you do not see the "Bookmarks Toolbar items" or other items that are missing in the toolbar palette or on a toolbar then click the "Restore Default Set" button
See also:
*http://kb.mozillazine.org/Uninstalling_add-ons
*http://kb.mozillazine.org/Uninstalling_toolbars -
Address book disappear, Application Support folder can not be opened
My address book disappear from my MacPro, I know it is in the User Library-Application Support folder, but when I try to open that folder, it has a red tag on the folder and it said I have no Authority to open that folder, I am the only one using this machine, never have this problem. And it will not allow me to restore the address book from Time Machine back to this folder. What's wrong? I think I need to figure out why it wont let me open the Application Support folder, could anyone help? thanks.
One Symptom: when I run the address book App, and try to import address file, the Menu bar- File-the Import dialog was greyed-out and can not be used.Could you please check the Sharing &permissions of these two folders (command +I). Check to see if you have "Read&Write access to these folders. It should be your user name with read&write privileges.
You will have to open the lock on the bottom right and it will request the admin password. Should your name not be there, select it by clicking on the plus sign on the bottom right and selecting your user name. Select Read&Write privilege and under the gear wheel beside the plus and minus signs,Make sure you apply to enclosed items.
It sounds like you somehow got them buggered. Rebuilding the permission table should of cleared up the problem. This could be a case of booting with your install DVD and rebuilding permissions from there.
Food for thought.
Next time you even think of modifying anything in you user library, Duplicate the whole folder and then you have a reference to go by. Just make sure that it is deleted after you are finished. This should be a standard step when troubleshooting. Changing something.....make a copy. -
Search should look at address book notes & application data
Search is basically useless to me, I used to have the ability to categorize my address book, or at the very least make a note in a contact that was searchable. (For example, "work" in the note section of a contact would result in search results of just the contacts with this note, go figure!) I also have lots of stuff in alternate notes programs that is not searchable. Not much of a reach to make data entered into an "i-device" searchable, I think a few software engineers should be able to tackle this insurmountable problem! I paid $500 for a device that has fewer options than my Palm Pilot did 8 years ago!(and in regards to searches, is absolutely inferior)Sounds like the only way to get apple to address an issue is to make lots of noise in this support forum. Sorry to waste anyone's time.
I just had this same problem. I use multiple mac computers that I sync manually because of a previous idisk issue. I noticed as I updated my cloud, the search function in address book quit working properly on each computer.
So created a new group list and I attempted to copy "All Contacts" into that group. It would not copy all my contacts into that group in one paste function. So I took all the the first 25 names and copied them. That worked. Then I moved to the next 26-50 names and so on. I noticed when I got to the fourth group of copying contacts that it did not paste and froze the application.
I quit address book, reopened it. All the contacts before the the fourth group were in the file. The search function worked on those names. I then went card by card and found one that had a "string" of data listed where an email address should I have been. So I deleted the corrupt card and now my address book search is working again.
Here is the short solve. Look for a corrupt card in your address book. I found the corrupt card by trying to copy it over to a new address group. The card that was corrupt just happened to be one that I had updated in the last week or so...
Hope this helps. -
Global Address book update issues
Hi, we have cached mode disabled by group policy. Some users are not seeing newly created users in the global address book. Other people can see them fine. I have seen many things relating to offline address book syncing but not much about it when you are
not using offline address books.
I can see the new users using OWA so I know the global address book is right. My confusion comes in when I try to figure out where the problem might lie. Why might one person see the new users but others cannot?
Is there only one area where all users go to access the online global address book or are they somehow spread across global catalog servers? We have 2010 sp2 servers.
Please help me out.
ThanksHi,
Since all users are in online mode and the issue only happens to some specific users, we need to check the following points to narrow down the issue:
1. Check whether the problematic users can view the new users in OWA.
2. Confirm there is no custom
address book policy in exchange server to customize views of their organization’s GAL.
3. Select the Send/Receive tab on the Ribbon. Click Send/Receive Groups and then click
Download Address Book.
4. Run problematic users’ Outlook in safe mode to check whether the issue persists.
Thanks,
Winnie Liang
TechNet Community Support -
Torch update to 6.0.0.448 hangs Win 7 Blackberry Desktop in Address book update
First attempt at using Win 7 Desktop update since updating 9800/Torch to 6.0.0.448 and the desktop hangs "Processing Device Address Book". Shows Record 189 of 189 and never completes.
Reset the Desktop Organizer configuration to ground zero and re-configured. Works now, but did duplicate a lot of my calendar events. Just a bit buggy....
-
Address book. First & last names order problem
Hi all, I'm having an issue with address book names not appearing in the right order, or more to the point first and last names not appearing in the right order - in fact it's exactly the same as:
http://discussions.apple.com/thread.jspa?messageID=7471811#7471811
However that solution doesn't work.
Essentially, when I go into address book / prefs and click sort by firstname/lastname - the list updates, but when I click 'before last name' / 'following last name' nothing happens at all. The list is ordered by first name - as I want it, but I'm still getting the surname first.
This has transferred over to my Touch as well so it's very frustrating! any ideas?
thanks very much for your timeHi
You want the first name first.
Investigate this.
Close Address Book
Open the ~/Library/Preferences/com.apple.AddressBook.plist with Property List editor which comes with XCode.
Look for the entry
*ABNameDisplay Number 1*
and change the 1 to 0 (zero)
and save. This sets the name order to 'Before last name'
If you don't have Xcode it might be on your Install DVD. -
B-Day set up in Address book shows up in iCal but won't sync to iPhone
And it would be my Mothers! I don't sync over air. Always sync through iTunes,, and I have marked "all iCalendars to sync".. I have 3 calendars plus a Birthday's one. I also have a "Birthdays Calendar". After I sync, all the Birthdays EXCEPT this particular one are there. My Birthdays are set up from my Address Book. I presume that is how most of my Birthdays got to appear in the Birthdays Calendar. I can't understand why this particular one doesn't show up. I have deleted the contact (my mother), and re-input, including birthday(obviously), but won't appear still after sync on my iPhone. I did try a separate entry into iCal, adding a Birthday event, and this time, that one showed up after Sync. Can anyone explain, why the separately added on into iCal showed up in my iPhone, and the birthday attached to my address contact in Address book didn't .. or is it a quirk (black hole event).
Let's see, uh, these are shows I downloaded 6 months ago, so I guess the answer is... no? Not so simple?
I looked a lot closer and apparently the shows I bought before are just gone. I went back to the store to repurchase only to be told I already bought them but if I want to I can buy them again. Not redownload but actually repurchase. So no, not so simple.
Something must have gotten corrupted and apparently once that happens then things get squirrly real fast. That's ok, I have an engineering degree and am computer literate. Imagine my mom trying to mess with this? No way.
So no - not nearly simple enough. -
I have a mobileMe account. I had duplicates in my address book and ical. I got all deleted and tried to import info back. Now my mac will import ical saved file in .icbu for only a few seconds and my address book still has duplicates.
Not sure why, but now I have two of everything. GREATTTTTTT.
-
Address Book Mail.app and FaceTime contacts problem
Hi to everyone. I really want some help hear. My mail.app on MacBook Pro 2011 don't recognises the most of my contacts email as a result not showing me my contact picture and first/last name when they send me something. Gives me the choise to create a new contact but the funny is that i already have the mail in my address book.
In the facetime happening the same thing when someone calls me via his phone number. I just see the phone number and not the contacs name. When he calls me via email i can see him as my contact. For FaceTime i figured out that when i put the area code on my contacts phone number it's fine. I just want to know if all of you have in your contact's phones there area codes or is a bug on my system and isn't neccessary.
Thanks.Mail.app recognizes their email address from Address Book.app and substitutes their names in place of the email address.
No, it doesn't. An email address field can contain a proper name which will be displayed if included; neither Mail nor Address Book substitute anything. If an email address does not contain a proper name, the only thing that will be displayed is the email address itself.
I would like to know how to get a more uniform look in my inbox. I've included a screenshot of Mail.app, but the domains of the emails are hidden for obvious reasons.
You can't, unless you can force everyone who might send you an email to include their name as part of the email address; good luck with that. Your link to a screenshot gives only a blank page, there is no image there.
Mulder -
Bulk change Address Book with Application or AppleScript
Dear all,
I'm an idiot. For all my contacts, I put the company that the person works for in the Suffix field of the Address Book entry.
I would like to change all my contacts such that the information in the Suffix field is moved to the Company field.
Is there an application or an AppleScript that I can use?
Thank you much!Here, use this in Applescript Editor:tell application "Address Book"
repeat with aPerson in people of group "Test Group"
if organization of aPerson is missing value then
set organization of aPerson to suffix of aPerson
set suffix of aPerson to missing value
end if
end repeat
save
end tell
Maybe you are looking for
-
Dublicate Value In HTML PL/SQL Report
hi, i have to enter item name and item Price iinto transaction_details by using a form and labour Work, labour amount into LAB_WORK_DTL table using a form . Now Problem is when i fetch these value in to PL/SQL Report then it's shows me double value l
-
I've barely begun to use CS5 (evaluation copy) and have already found some issues I don't know how to solve. And I was so looking forward to content aware fill! 1) CS5 is losing focus after a resize. I do a lot of repetitive things where I use a ser
-
Payment Block removed or allow to make the payment after the due date
Hi, Regarding Payment block, we have created one payment term with block indicator and assigned to some vendors. So each posting system will generate the entry with payment block, once the document crossed the due date (assume that 30days) system wan
-
Bapi for transaction 'MB1C' -'Enter other goods receipt...'
Hi, Please suggest the BAPI for the transaction 'MB1C'. thanks
-
Human Resources - Training and Events
Hello, We are using SAP T&E systems Enterprise. Is it possible to move "business events type" and "business event" to other folders? Thanks