Address data pop up in Email Header

Hi Experts,
While creating a new Email in inteaction center, when we give some name in TO field and click on CHECK button then a pop up opens with all possible names. When we click on any one of these names, again a new pop up for ADDRESS DATA comes for the name. We need to modify this ADDRESS DATA pop up to remove/add some fields. Any pointer in this regard will be highly appreciated.
Regards,
Vimal

Any help on this would be highly appreciated. I am also facing the same issue.

Similar Messages

Extract email addresses from email header - Sender (From) - Mail

Hi!
I would like to extract email addresses from email header from field "Sender (From)" and from email body in Mail at the same time.
I saw only scripts how to extract from email body.
I get emails asking for some informations about product and many people don't include their email address in the body, so I have to extract from email header as well.
I would like to extract email addresses from whole email account, separate alphabeticaly, delete duplicates and save it (separated by comma) in text file.
This I would use for sending massive email to all customers.
I'm on OSX 10.6.8.
Do you have please somebody script for extracting email addresses in the way:
1. select mail account
2. run script
3. save email addresses to txt file
Thank you for help and advise!

Hi Neville!
Last time I was writing basic programs in Turbopascal in 1996.
Maybe I'm doing something wrong...
1. I switched off in Mail "Use Smart Addresses".
2. I changed the path to my account in both commands:
Command A.
i=~/Library/Mail/[email protected]@pop.gmail.com # Input file path
o=~/Desktop/ # Output file path
n=`date "+%y%m%d%H%M%S"`-"addresses" # time stamped file name
grep -rh From: $i | grep -o '[-a-zA-Z0-9.]*@.[^>]*' | awk '!seen[$0]++' > $o$n
Command B.
grep -rh From: ~/Library/Mail/[email protected]@pop.gmail.com | grep -o '[-a-zA-Z0-9.]*@.[^>]*' | awk '!seen[$0]++' > ~/Desktop/`date \"+%y%m%d%H%M%S\"`"
3. I write commands in TERMINAL.
result of Command A:
List of couple emails same like before switching of "Use Smart Addresses"
I answered it already above:
It can extract to .txt file only email addresses from email header which includes after the name as well email address.
Example:
From: Neville Hillyer <[email protected]>
If there is in header only the name without the email address then it's not extracted (email is visible after secondary click on the name)
Example:
From: Neville Hillyer
I just checked that most of emails I have has in the emailheader only the name without the email address so I miss most of email addresses.
Result of Command B:
>
And nothing going on...
4. I tried the same in AppleScript editor
Result of Command A:
Syntax error. A unknown token can’t go after this identifier.
I changed the path but I still get syntax errors
(instead of i=~/Library... i put i= Users/muzaa/Library...)
Result of Command B:
Syntax error: A “from” can’t go after this identifier.
grep -rh From: /Users/radimmuzikant/Library/Mail/[email protected]@pop.gmail.com | grep -o '[-a-zA-Z0-9.]*@.[^>]*' | awk '!seen[$0]++' > ~/Desktop/`date \"+%y%m%d%H%M%S\"`"

BP address data in Email form

Hello,
When I create a campaign with communication channel as "email", how can I automatically add business partner address data ( Those BP's which are in the target group) when sending emails?
Is there a standard functionality available?
thanks in advance.

Hi,
You can use the Personalized mail functionality of the CRM for adding BP address in the email form. This is the standard functionality of the CRM 5.0.
In t code CRMD_EMAIL while creating the text of the mail form drag and drop address attributes from the left hand side Object / Attribute Business partner.
In Business partner Object you will get all the fields of the Business Partner including Street1 street2 City, POBox etc. Drag and drop these attributes wherever you want on the mail form text.
Hope this will help.....
Rgds
Mallikrjun

HT2731 How do I remove an email address that is no longer vaild for the iTunes Store? A really old email address keeps popping up on my iPhone, the email address is not valid and I have no idea what the password was. It's been over two years.

How do I remove an email address that is no longer vaild for the iTunes Store or my iPhone? A really old email address keeps popping up on my iPhone, the email address is not valid and I have no idea what the password was. It's been over two years.

Hello tcnolen1,
It sounds like you are trying to change the Apple ID logged into the iTunes & App Stores on your iPhone. Use these steps:
Changing your Apple ID account
Tap Settings > iTunes & App Stores, then tap the Apple ID signed in.
Sign out of the current Apple ID account and then sign in with another account or create a new Apple ID.
You can find the full article here:
iOS: Changing the signed-in iTunes Store Apple ID account
http://support.apple.com/kb/ht1311
Thank you for using Apple Support Communities.
Best,
Sheila M.

IP-address in email header

Hi,
does anybody know how to get the ip-addresses in an email header?
Yes, I know there is a method called getfrom(), but there, you only get the senders email address. My problem is to get the ip-address from the mail server the email was send from.
thank you very much for replying

Maybe i have to be a little bit precise,
the aim is to extract the first ip-address, that is in the header - this is for identify the location the email is coming from.
my idea was to parse the complete message with a regular expression in order to find the first appearance of an ip-address. Maybe somebody has another idea, is there a possibility to only write the email-header to a string? This would be more efficient...
Thanks...

CRM Email Header - From Address

How do I update the CRM Email header "From Address" with the individual names of our Call Center Agents?

Hi Micheal,
It is by design BUG-OM 537040. In Exchange 2013 for a Read Receipt Response on the P2 header's From Address it just has the User Alias it doesn't have the Complete Email Address, but on previous versions it is not the case it has the complete email address.
When this Response from external address is sent and if it goes through an External Anti-spam like postini,messagelabs,ironport etc., since it doesn't find the complete address it adds @domain.invalid and processes the message further so the Recipient
of the message will have the Sender address showing as
[email protected] and also it will say so and so mail not authorized.
please refer the below link for your reference
http://social.technet.microsoft.com/Forums/exchange/en-US/8f5c1570-d3df-4ba9-9e72-bd2d6bee0b3b/microsoft-exchange-2013-read-receipt
Please mark as helpful if you find my contribution useful or as an answer if it does answer your question.
That will encourage me - and others - to take time out to help you.
Regards,
Sathish

HT201342 i changed my email address and now I can not access iCloud because the old address keeps popping up.

i changed my email address and now I can not access iCloud because the old address keeps popping up.

Is this happening on your iOS device or your Mac?
And is the iOS device or Mac signed into the old ID ("email") in Settings>iCloud (System Preferences>iCloud)?

"Enter the Yahoo! password for [my yahoo email address]" keeps popping up on my Mac desktop

A pop-up window "Enter the Yahoo! password for [my yahoo email address]" keeps popping up on my Mac desktop (Leopard OS) every few hours. This has happened for the past year and only happens on my MacPro desktop, never on other laptops/computer. Does anyone have solution please ?

Ok !! I think I finally found the trouble of this !! I went crazy that every 5 seconds I had to fill in my password for my yahoo account om Apple Mail. My computer is in another language so I'll try to translate as good as possible the buttons and so ..
So these are the steps required:
You need to give computer access to the password of Yahoo.com. How to do so ?
You go to the application "Key Chain" that is included in your MacBook Pro.
Then you go to the first tab that should say something with "Login/Session" and you should see all your saved passwords.
Scroll down to the saved password of "Yahoo: your-username @ ...
Click on it, you should see a window opening
Go to the tab "Access Control"
Then click on "Allow all applications to connect .. ", NOT the option "Ask every time for allowance" or you can also just add the program "MAIL" with the "+" icon !!
There you go, now you should not have to worry again !!!!!!
Hope it helps people !!!

I had itunes years ago but the email address associated with this is not longer in use. Is there anyway to updating and transferring all music and data to a new email address?

I had itunes years ago but the email address associated with this is not longer in use. Is there anyway to updating and transferring all music and data to a new email address?

Hello Graceevelyn23,
Thanks for the question, and welcome to Apple Support Communities. You can update the primary email address that is used for your Apple ID:
Apple ID: Changing the email address you use for your Apple ID
http://support.apple.com/kb/HT5621
Thanks,
Matt M.

Email $header problem - need help

I have designed a mail processing script to send POST data
captured by a form to an email address specified by $to. It has a
subject line ($subject). Now I want to add a ‘from’
line which is to contain the email address submitted as one of the
POST form fields (volunteerEmailaddress). This is all done in PHP.
I took a crack at it (see below). The $to line and the
$subject lines work just fine. The $header displays fine in the
email but only the first piece (From: Volunteer Applicant), not the
second piece (volunteerEmailaddress).
Can anyone see what I have coded incorrectly and suggest the
correct code to do this?
Thanks!
Carver
//mail processing script
$to = '[email protected]';// use your own email address
$subject = 'Volunteer Application';
// create additional headers
$headers = 'From: Volunteer Applicant';
if (!empty($email)) {
$headers .= '\r\nReply-To: $volunteerEmailaddress';

CarverW wrote:
> Regarding email header injection attacks -- I have
followed the tutorials in
> your book and have in the include file what you have in
your book in the file
> process_mail.inc.php
That should be fine. A lot of people just pick up scripts
from outdated
books or websites. So I wanted to make sure you were aware of
the
potential danger. You obviously are. ;-)
> Your book has been excellent for my "learing curve" The
'agony' of Chapter 10
> was well worth it. I DO have a basic understanding,
pretty much of each code
> line but do get caught up in the syntax when I
customize!
Thanks for the feedback. I promise, the agony does eventually
turn into
pleasure - at least it does for most people.
David Powers, Adobe Community Expert
Author, "The Essential Guide to Dreamweaver CS3" (friends of
ED)
Author, "PHP Solutions" (friends of ED)
http://foundationphp.com/

Employee Address Entry (Address Stype pop-up window not come in R12)

Hi
I have implemented Oracle HRMS (11.5.10.*). But now I am going to implement HRMS in R12 (12.0.6).
My Problem is, In 11i when I would want to enter any Employee Address a pop-up window come to select address style
by In R12 there is no pup-up window come. But My client requirement is to use different address style.
Anyone could help me to could i get the address style pup-up window.
Regards
Makshud

Hi Winnie
Unfortunately I have been sick and did not read the message before. I apologize.
I have not received help beyond what is on the page. But when I get I tell you.
I hope you can get answers. If you receive, I ask that you share with me.
thank you very much
best regards
AC
Date: Mon, 27 Feb 2012 09:33:10 -0700
From: [email protected]
To: [email protected]
Subject: Pop up Window before saving remembering the need (forcing) to fill required fields in a form
    Re: Pop up Window before saving remembering the need (forcing) to fill required fields in a form
    created by Win_Form in Forms - View the full discussion
Hi ACI wonder if you can share any responses on to your question above?I too have never used a script but, I have the same problems as you in regards to building a form. And wants to have the same 'protection' and message reminders for the end users. Any information, including a script and/or a contact email of experts you can share with me will help tremendously. Thank you so much in advance. Winnie
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4232307#4232307
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4232307#4232307. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Forms by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

How to use a ip address for pop & smtp server names when creating a new account

My xp PC is on a lan behind a Freebsd os [IE. flavor of unix] which is not running a dns server. The only way to reach it is by ip address. I have configured the account with a ip address for pop & smtp. When I create and sent a email, Thunderbird shows a window saying it trying to connect and after 10 seconds it goes away with out showing the status window. There is no email in the sent folder. Is it possible to do this ???? I can accomplish this using ms/outlook so I know it is possible.

I haven't tried this in years, but could you give this server a name and enter that into TB
Then in C:\Windows\System32\drivers\etc\hosts you add that name and ip

Creation of service order with address data.

Hello community,
I have the following requirement: create maintenance orders with order address data, the creation of these orders will be triggered by an interface with a legacy system.
For order creation I intend to use BAPI_ALM_ORDER_MAINTAIN but this function does not provide the possibility to enter address information.
I would not like to have to create a partner and assign it to the order as this address will be used only once.
Does anyone have suggestions how to do it ?.
Thanks.
Roberto.

Roberto,
Try this:
*& Report ZPJA_ADDR_TX
report zpja_addr_tx.
data: lt_adrc type standard table of adrc with header line.
data: lt_adrc1 type standard table of addr1_data with header line.
* get address from first object
call function 'ADDR_SELECT_ADRC_SINGLE'
exporting
    addrnumber        = '0000033071'
tables
    et_adrc           = lt_adrc
exceptions
    address_not_exist = 1
    parameter_error   = 2
    internal_error    = 3
    others            = 4.
loop at lt_adrc.
move-corresponding lt_adrc to lt_adrc1.
lt_adrc1-name1 = sy-timlo.   " write current time for testing
append lt_adrc1.
endloop.
* update second address
call function 'ADDR_UPDATE'
exporting
    address_data        = lt_adrc1
    address_number      = '0000033205'
    date_from           = '00010101'
    language            = sy-langu
    check_empty_address = ' '
    check_address       = ' '
exceptions
    address_not_exist   = 1
    parameter_error     = 2
    version_not_exist   = 3
    internal_error      = 4
    others              = 5.
call function 'ADDR_MEMORY_SAVE'.

How to pop-up Outlook Email window with To: blank?

Hi All,
I currently have a page which shows multiple rows with checkboxes. I have an After Submit process which loops through the rows and stores some values of the checked rows into a variable to be used as the body of an email. I then call apex_mail.send() to send the email.
Instead of prepopulating a TO: address within the process and have it send automatically, I would like to have Outlook pop-up the email window with the body prepopulated as mentioned above but with the TO: address box null so that the user can select the address from Outlook's Address Book.
Any help/advice would be greatly appreciated!
Thanks,
Jason

1: Yup.. It would look something like this:
<a href="mailto:?body=aslkdjldfks">Open Email</a> the # should read:
"mailto:?body=aslkdjldfks"
2: If you go this route, there are a few things you need to remember:
The mailto tag is client side. So you would have to generate the javascript on the server and print it out on the client.
If your users do not have Outlook, or another mail client, this will do nothing.
If you have a really long message body it will not work.
If you have weird characters you will need to encode these.
So, if you still think that the mailto is what you need then here is some javascript that will auto open it for you:
http://www.webmasterworld.com/javascript/3290040.htm

Address data changed after invoice is created

Hi,
I've a problem to solve and it's related with data changed after invoice is created.
The scenario is the follow:
1º - create a complete and standard sales process - order => delivery => invoice, with the standard partner scheme and without edit the address data, for any kind of partner
2ª after the invoice is created, I change the address data on Client Master Data, for the same client that I've used on previous process
3º I'll go to the VF03 transaction and take a look at the partner data on header level. Here I can see that the changes on the Client Master Data ar updated to the invoice document wich is already created and printed when I maked the changes
I think that could be a program error because, once the documento is created, you only can change texts and accounts if this document is not yet created.
And, I can't edit this kind of data on invoice creation because it must be done at order level.
So I don't understand why it happen, but it happen on more than one client.
I'll hope that anyone can help me to solve this issue.
Kind regards,
Nuno Rodrigues

Hi Nuno,
the adresses of all Clients are stored in table adrc. If there are no changes in the order, the system takes the standard adress of the client. That is made for not having an extra adress for each order.
If you change the adress - the system will create a new adressnumber ( 999........ - see in VBPA ).
If you have different adressnumbers in your orders, you are not able th collect several orders into one delivery note - for the adressnumber ist normally a split-criteria.
Ich you will have an extra Adress for each Order, change the adress - for example by an user exit.
But if you have different adressnumbers - the delivery and the invoice will split the different orders - if you dont do something against in an user-exit.
Hans

Address data pop up in Email Header

Similar Messages

Maybe you are looking for