ADE SDK and Lion
When implementing the ADE SDK on a webpage and using any browser (Safari, Firefox or Chrome) on Mac OSX 10.7 Lion the button says System, instead of Lauch or Install. Also, below the button shows Sorry, but your system does not meet the minimum system requirements. When you press the System button it sends you to some non descript error page: http://www.adobe.com/special/errorpages/404.html.
Any ideas how to correct these issues? When it might work correctly with 10.7?
Thanks
Rob
Wow...nobody else facing this issue? Has anybody resolved this?
Thanks
Similar Messages
-
I bought 2 ebooks from Ebay in 2013 and already read it with ADE, but now I got a new PC, downloaded ADE again and am now not able to open the two acsm-ebooks any more
Use the trackpad to scroll, thats what it was designed for. The scroll bars automatically disappear when not being used and will appear if you scroll up or down using the trackpad.
This is a user-to-user forum and most people will post on here if they have problems. You very rarely get people posting to say there update went smooth. The fact is the vast majority of Mountain Lion users will not be experiencing any major problems with the OS, or maybe with apps which are not compatible, but thats hardly Apple's fault if developers don't update their apps. -
Can't get playlists from one one computer to another. Confident Home Sharing is turned on correctly. Have imac and macbook Air and Lion. Using smart lists.
Using Ethernet, I am attempting to stream the movies on my computer to my girlfriends computer through iTunes home sharing. I want to watch the movies that are on one computer on another.
-
Hi All!
I have a scenario I want some input on.
1 Mac Mini Lion Server 10.7.2
1 TC 2nd Gen
x iPads
x iPhones
2 Lion clients
I want to use the Lion Server for all collaboration services, and use Profile Manager to provide central management of iOS and Lion clients, and I want to use network accounts on the server.
All is set up and working well, mail, ical, wiki, addressbook, VPN servers, profile manager settings, apart from one thing. how do I best push DNS server settings to the client to point to the server?
In the TC there are no way to set what DNS server is served to clients. That would solve my case in an instant. Now all clients get the ISPs DNS servers, or pass-through of whatever DNS server is set up on the TC.
I have 2 possible solutions:
1. Set up TC to only provide 1 DHCP address reserved for the server, and then use DHCP on the Lion Server for the internal clients. This will work as it has been tested by other users here on this forum.
2. Set the DNS server on the TC to point to the local Lion Server. I actually just came up with this idéa as I was typing.... maybe that is the answer? The inernal clients get the internal server as DNS and the server uses forwarders or roothints.
What do you think? If you have this combo, TC/AEBS and Lion Server, how did you solve it?
/HasseHi All!
I actually found the solution myself. Soluton 2 does the trick brilliantly! I can't imagine why I didn't think of this before. I have searched this forum for a solution too, but this just was too easy . The Lion Server advanced admin guide didn't mention this either, even in the chapter about AEBS coexistance.
/Hasse -
I'm using iTunes 10.6.1 on an iMac 2,66 Ghz intel core Duo with8GB DDR3 and Lion 10.7.3 I have 260000 mp3 stored on a My Book 3 TB external fire wire 800 Drive - when I play songs I get short interruptions every 20 to 30 seconds. Can't iTunes handle that number of songs?
I'm using iTunes 10.6.1 on an iMac 2,66 Ghz intel core Duo with8GB DDR3 and Lion 10.7.3 I have 260000 mp3 stored on a My Book 3 TB external fire wire 800 Drive - when I play songs I get short interruptions every 20 to 30 seconds. Can't iTunes handle that number of songs?
-
How can i update my old 2006 iMac Intel core 2 duo running 10.6.8 to OSX Lion so that I can sync using iCloud with my newer devices? Mountain Lion is not an option for my older model and Lion is no longer available at App store.
Call Apple's online store's telesales agents: 1-800-MY-APPLE (1-800-692-7753) or Customer Service and Sales Support at 1-800-676-2775. For Lion you'll get a redemptions code via e-mail and need to DL from the Mac Apple Store (requires SL 10.6.6+).
-
Ever since installing iCloud and Lion my computer is slow or freezes. The color wheel comes on and My work stops. I have only a small window of time where my computers will function normally during the day. I know many others that have the same problem. I'll get 20-30 minutes of work done and then a sync or something comes on, the color wheel of death shows up, and my productivity is shot. I have to shut the computer down the hard way! when it comes back up, it is still either frozen or slow. I've checked in at the genius bar and all they say is that there have been some problems that Apple is trying to fix. It effects Mail, Contacts, Safari, Calendar....yeah, pretty much everything. My iPhone and iPad are not effected as much so I end up doing what I can with them. I've seen the blogs out there and understand that many have the same problem. I have been waiting to read about a fix but I have found nothing! Any ideas?
Not enough free space on the startup disk can slow the system down.
Right or control click the MacintoshHD icon. Click Get Info. In the Get Info window you will see Capacity and Available. Make sure there's a minimum of 15% free disk space.
For startup issues... open System Preferences > Users & Groups - Login Items. Delete any apps listed there then restart your mac.
And disable the Lion "resume" feature.
Open System Preferences > General
Deselect: Restore windows when quitting and re-opening apps
And Spotlight may be indexing... you can turn that off > Turning Off Spotlight | Mac Tricks And Tips -
External hard drive Snow Leopard and Lion compatibility?
I am going to install Snow Leopard on my Mac (so I can then purchase Lion and install THAT into my Mac) but it only has 975 mb of memory left. So, I've decided that I need to purchase an external hard drive so that I can transfer some videos, songs, etc. to create more space on my Mac. My question is, what external hard drive will be compatible with Snow Leopard and Lion? I was going to purchase a Western Digital external but I've heard many problems of it being incompatible with Lion. What's a reliable and compatible brand that I could purchase? I'm looking for an external hard drive that hold at least 500 gb.
I think your analysis is kind of harsh, kurt.
'garbage'? really?
Sure, some familiar paradigms have changed, and change brings pain - or at least, unfamiliarity - but that doesn't necessarily mean they're bad.
Of all the changes you mention three things that you consider abominations...
UI changes more in line with iOS. Sure, and this is bad because...?
It's clear that Apple see the iOS as the future, and it makes sense to unify the experience - at least where it makes sense. You don't actually mention which elements you consider bad, BTW.
The scrolling seems to be the one most often cited, but to me it makes way more sense to manipulate the document directly, rather than manipulate a scroll bar that works inversely. I'm not sure what other UI elements you're concerned about.
As for the Save As... issue, the change to Duplicate makes a lot of sense when you understand the concept of automatic file saving and versioning. There's never a need to 'save as' in order to create a point-in-time backup since you automatically get point-in-time backups just by using the OS. The only reason it makes sense to to force a branch and for that, 'duplicate' makes sense. If it bothers you, just read 'duplicate' as 'save as'.
The big break here is that versioning requires application support - the developer needs to add it to their app code - and that creates inconsistencies in the short term because not all apps support versioning. That will fix in time as developers release updates to their apps.
As for bugs, the current release is 10.7.2, so that's two revisions past the original. Any major release (of any applications, not just an OS) is going to have some number of issues and some people avoid any .0 release just for that reason. I think the concensus is that by the time you get to .2 most of the issues have been resolved. Can you point to any bug in 10.7.2 that directly affects you and your use of the OS? or are you basing your statements on outdated material?
In short, every major OS release, from every OS vendor has some number of changes that confuse and upset users, and some number of short-term pain while application developers and users get up to speed. Lion is no different in that respect, and if you look back in history you'll see the exact same sentiment for Snow Leopard's release, and Leopard's, and Tiger's, and..., and..., and...
To call it garbage, though? I think not. -
How do I make a back up system disk. I wish to run snow leopard and Lion on 1 drive.
I wish to run Snow Leopard and Lion on 1 Hard Drive. I need to back up snow leopard and then install Lion. Any suggestions on how to do this?
Too follow up on this topic - I have recently upgraded to 10.8.2. I have a complete backup HD with SL inclluding some SL-only programs on it. What I want is to make a small size, just SL and my few programs, hard drive with which I can boot when needed. Is it possible to trash all the many programs I have on the SL drive and just keep certain ones? How?
Thanks you for any advice,
John -
Flex SDK and AIR runtime version in mobile
Hi, guys.
I'm trying to make my first Flex mobile app.
I'm a little confused about the relationship between Flex SDK and AIR runtime versions for mobile development.
In the "Developing Mobile Applications with ADOBE FLEX 4.6 and ADOBE FLASH BUILDER 4.6" pdf document, it says:
"AIR requirements
Flex mobile projects and ActionScript mobile projects require AIR 2.6 or a higher version. You can run mobile projects on physical devices that support AIR 2.6 or a higher version of AIR.
You can install AIR 2.6 or a higher version only on supported Android devices that run Android 2.2 or a higher version. For the complete list of supported Android devices, see Certified Devices. Also, review the minimum system requirements to run Adobe AIR on Android devices at Mobile System Requirements.
Note: If you do not have a device that supports AIR 2.6 or a higher version of AIR, you can use Flash Builder to launch and debug mobile applications on the desktop."
So, I go and check the Certified devices in http://www.adobe.com/devnet-apps/flashruntimes/certified-devices.html and find that the minimun FLASH PLAYER version accepted by ALL devices is FP 10.1
1. Does this mean that if I want to release an app to target ALL mobile devices, then I can only use Flex 4.5?
2. Do support for Flash Player mean the same than support for Adobe AIR? Or the application will prompt the user to install whatever version of the AIR runtime and all of them would be supported by the device, even in the FLASH PLAYER support is for a lesser version?
Thanks!Thanks for your help, Flex harUI,
The first impression that comes to mind is that FP version is indeed only for the web browser plugin. Then, why does the official Flex 4.6 mobile development documentation have a link to that page that only speaks about the supported FP version in mobiles under the title "AIR requirements"??
This makes it way too confusing.
Do you know whether there is something like an equivalent matrix/list of mobile devices with their supported AIR runtime versions? I went a great deal in trying to keep my original app under 400kb... I didn't know that in the end it would end up weighing 9.5Mb... :S
Thanks again, -
I have iMac and lion OS. When I try to download (free or not) any program it always message "There was an error in the App Store. Please try again later. (13)
http://www.apple.com/support/mac/app-store/contact.html?form=account
-
Hi! I work with Photoshop/Premiere Elements 10 on my snow leopard (10.6.8) without problems since years. Now I want to move over to the new MacBook Pro (and lion 10.7.5) but only Photoshop runs on it, every Premiere version (I downloaded Elements 12 and further more) stops installation and shows Installation ERROR: ASU has quit unexpectedly, Media DB Error: 18. Please help!
run the cleaner and retry installing per, Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
-
What's the difference between Java SDK and the Enterprise Edition?
What's the difference between Java SDK and the Enterprise Edition? Are they both free?
both r free but they are used in diffrent applications. sdk are used for simple apps that run on your computer while j2e (enterprise edition) are ment for large distributed computer systems that include servers and such. if you don't know the diffrence you probably wont need the the j2e, only the sdk.
-
Problems with stacked bar chart in Java SDK and CRDesigner
Hi @ll,
I have an issue with the rendering of stacked bar charts through the Java SDK and the CRDesigner. unfortunately, my research in this forum and with the help of aunt google didn't lead to success.
These are my problems:
I have a stacked bar chart which, when datasets/stacks increase in number per bar, displays errors:
1.) the single stacks of the bar merge together randomly and form bigger stacks with the sum of the singles. the information of single stacks gets lost in the bar.
2.) the total sum of all singles is bigger than the maximum value on the y-axis displays. thus, the scaling is wrong.
1.) appears in the CRDesigner as well as in the Java SDK
2.) only occurs in the Java SDK
Is there any trick to turn the random merging of slices off?
Is the false scaling a known issue and is there a bugfix/workaround?
many thanks for all advice
Tomhi folks,
i found the answer to the above problems:
when you specify the recordfields that are responsible for the change to the next stack or bar, the 'stack' fields have to be unique.
in my case i evaluated durations in msec (as stacks) from different devices (as bars). randomly i had the same durations for one device. what happens is, that CR does not notice a change and accumulates to the first stack with the same duration.
surprisingly this also seems to derange the axis scaling. fix the problem by simply using an overall unique recordfield like rownum or a formula that forms the current timestamp to text as identifier for the stacking.
cheers
.t -
Dual boot machine- snow leopard and Lion
It appears I will need to set up one of my machines as dual boot, containing partitions for Snow Leopard and Lion. The reason is that Quicken is NOT compatible with Lion, and will apparently never be. Intuits "solutions" are to go to other, far less capable software, or not upgrade. Which, of course means, NEVER upgrade again.
So, I think my best solution is to set up a partition for snow leopard and one for Lion. How do I go about this? Size of partition. How to partition? Which boot disks do I use to do this?
Any help is much appreciated.Ok, I just got done doing this yesterday so I can lay it out for you.
1: Copy all your user files to a regular external drive and disconnect.
2: Carbon Copy Cloner your 10.6.8 setup to another blank HFS+Journaled external drive and disconnect.
3: Hold c and boot off the 10.6 installer disk and erase your entire boot drive in Disk Utility (under the Utilities menu) format HFS+Journaled (default) of course.
4: Quit and install 10.6. Setup with the same user name as Snow. Run the 10.6.8 Combo Update. Then Software Update.
http://support.apple.com/kb/DL1399
5: Use the MacAppStore to download Lion, BUT DO NOT INSTALL yet! Cancel it and click on the Installer and select "Show in Finder" follow these instructions to make boot DVD's and dmg images of Lion installer.
http://www.eggfreckles.net/tech/burning-a-lion-boot-disc/
6: Once you do that, then Install Lion. On a pristine 10.6.8 with no third party programs or other BS it should go perfectly. Check it out that it's stable just in case or else hold command r and boot into the Recovery Partition and redownload/install again.
7: Once that's done and Software Updated, run Bootcamp and create a Windows partition larger than your 10.6.8 clone naturally. The size is up to you to decide. Cancel the Bootcamp when the partition is created.
8: Hold Option and boot off the 10.6.8 clone with all your stuff and programs, use Disk Utility to change the "BOOTCAMP" partition to "Snow Leopard" and make it a HFS+ Journaled partition from the MSDOS format (not the whole drive now or you'll lose Lion and the Recovery Partition) If this doesn't work then use Disk Utility c booted from the 10.7 DVD or command r from the Lion Recovery Partition and use Disk Utility there.
9: Once that's done, Option boot off the 10.6.8 clone and Carbon Copy Clone 10.6.8 onto the Snow Leopard partition.
Walla, a dual boot system with all your stuff intact. Just hold option upon boot and/or use the Startup Disk in System Preferences to set a default.
I'm currently working on a quad boot system now. It's got Lion, Snow, Linux and will have Windows too. A lot more complicated than simply Snow and Lion.
Note: OS X Lion reguires a internet connection to install, even from a boot DVD.
Enjoy.
Maybe you are looking for
-
How to set up Time machine for multiple computers
How to name and select for backup
-
¿How can I publish a Camera with a different UserID?
First of all, Happy New Year 2011! I've tried WebcamPublisher webCamPub.publish("userPublisher") method to publish a WebCam to a room with a different user that the "myUserId" logged at the session, but the subscribers attached to the room they never
-
I just got an iPod nano (4th gen.) yesterday and I charged it until the battery was fully charged. I used the iPod for about 2 hours total today and the battery completely drained. I was playing some games, but mostly listening to music. Is this a pr
-
Hello After installung iOS 8.1 i'm still missing an App for my iCloud like DropBox or how do you save received PDF Attachments by E-Mail in your iCloud? In the other way how do I insert an Attachment from my iCloud in to a new E-Mail? Photos or Video
-
System Windows 7 Home Premium. During the running My Image Garden the error "A required file may have been deleted or damage. Reinstall this software." appears or when running Image Display. Message constantly pop-up. Did re-install original disk