ADF Pivot table - Custom Pivot

Hello ADF Experts,
I would like to pivot to row/column using my custom method than using the default API as ADF pivot table does not support asymmetric pivoting.
For example I have below as base grid:
Product
Geography
Sales
Prod1
US
100
Prod2
IN
50
UK
30
If I move Geography to columns, it will create invalid layout.
Product
Sales/US
Sales/IN
Sales/UK
Prod1
100
Prod2
50
30
Now you can observe that Prod1->Sales/IN, Prod1->Sales/UK and Prod2-> Sales/US is empty which is not in sync with my database as there are values 200, 300, 40 respectively.
To avoid such empty cells, I would like to write my custom method to fetch the new values while pivoting.
How can I do this?

Hi Timo,
Jdev version: 11.1.1.7
Custom method will be my method which will pivot to columns as well as populate the empty cells(the cells which are created by asymmetric layout).
Basically I would like get the new grid data after pivoting and refresh the pivot table if its asymmetric with empty cells.
Unfortunately my data is in PageFlowScope so it doesnt get refreshed.
Regards,
Suresh

Similar Messages

  • Showing Active tests in a pivot table

    Hi,
    If I wanted to recreate the standard Test Plan Progress report in an Excel pivot table what Pivot table fields are required?  I cannot get the tests that were never run to show in my pivot table - what am I missing?  In Test Manger the
    tests that are not run are flagged as "Active" but I can't not find the equivalent state in the Pivot table fields.  Is the state "never run", as shown in the  Test Plan Progress report, the same as "Active"
    in Test Manager?
    Cheers
    Dave
    Test Plan Progress
    Test Plan Progress

    Hi dsw850,
    For the test plan process report in the excel, we could add the necessary fields to the report from PivotTable Fields. The required fields are based on the detail requirements.
    Base on my test, I found that the Active state (In mtm) are mapped to the
    Never run (In report). We could check the Outcome field (Test Result) in the PivotTable Fields to check the detail state of each test case result. It contains the history state.
    There is a link about test plan process report that may benefit you:
    # Test Plan Progress Report
    http://msdn.microsoft.com/en-us/library/dd380702(VS.100).aspx
    Thanks
    Best Regards
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Converting fromula in pivot tables in EXcel 2013

    I'm looking to convert to Formulas in Excel 2013. The Help function says that the functionality resides in the pivot table tools-> Analyze->in the Calculations group> click OLAP tools > click convert to formula
    This is grayed out in my worksheet and I am clicking on a cell within the Pivot table
    The pivot table source is an other excel worksheet in the same workbook that is not OLAP data (I don't even really know what that is)
    Is there something i need to do to ungray the OLAP tools icon? Or is this no longer possible. This functionality in 2007 was not tied to OLAP tools
    Thanks

    Hi,
    As far as I know, only the Online Analytical Processing (OLAP) PivotTable report by using converting formula.
    The data source must be imported from "Data tab>From other source>From Analysis Services" and then we could use the converting formula.
    http://office.microsoft.com/en-us/excel-help/convert-pivottable-cells-to-worksheet-formulas-HA010096303.aspx
    Regards,
    George Zhao
    TechNet Community Support

  • Totals in Pivot table

    I have this pivot table in OBI EE.
    It have the base amount per year and per month. With one total per year, with sumatory of Base amount.
    Moth      2001 2002 2003
    1 Base 4.206.068,79 4.817.526,27 4.315.587,17
    2 Base 4.100.429,84 4.031.267,42 4.950.029,58
    3 Base 4.404.968,15 4.356.915,33 5.147.919,34
    4 Base 4.260.013,78 6.482.442,15 5.317.174,24
    5 Base 4.885.129,07 4.600.874,08 5.532.471,30
    6 Base 4.558.260,11 4.670.961,09 5.208.824,92
    7 Base 4.766.663,43 5.929.013,00 6.123.468,84
    8 Base 4.634.208,62 5.192.108,74 5.588.621,28
    9 Base 5.011.952,41 5.013.715,37 6.076.325,09
    10 Base 5.311.867,88 5.641.683,97 6.778.596,81
    11 Base 5.852.338,40 5.975.394,22 5.337.782,70
    12 Base 5.098.619,76 5.771.857,52 5.313.767,04
    SUM Base 57.090.520,24 62.483.759,16 65.690.568,31
    I want to show another total, showing the difference of the total base amount per year, and total field "Atipicos". this field "Atipicos" is not shown in the pivot table. "Atipicos" is a field in the fact table.
    I created a calculated field with the difference between the base amount and the "Atipicos" field. But I dont know how to show the total field, without showing the "Atipicos" field in the pivot table..
    If anyone can help me.
    Gracias.
    Moth 2001 2002 2003
    1 Base 4.206.068,79 4.817.526,27 4.315.587,17
    2 Base 4.100.429,84 4.031.267,42 4.950.029,58
    3 Base 4.404.968,15 4.356.915,33 5.147.919,34
    4 Base 4.260.013,78 6.482.442,15 5.317.174,24
    5 Base 4.885.129,07 4.600.874,08 5.532.471,30
    6 Base 4.558.260,11 4.670.961,09 5.208.824,92
    7 Base 4.766.663,43 5.929.013,00 6.123.468,84
    8 Base 4.634.208,62 5.192.108,74 5.588.621,28
    9 Base 5.011.952,41 5.013.715,37 6.076.325,09
    10 Base 5.311.867,88 5.641.683,97 6.778.596,81
    11 Base 5.852.338,40 5.975.394,22 5.337.782,70
    12 Base 5.098.619,76 5.771.857,52 5.313.767,04
    SUM Base      57.090.520,24 62.483.759,16 65.690.568,31
    SUM (Base - Atipicos) 50.085.520,24 56.432.759,16 59.605.568,31
    This is a picture of how I created the pivot table.
    If anyone can help me.
    Thanks.
    Edited by: user12014887 on 08-feb-2010 3:35
    Edited by: user12014887 on 08-feb-2010 13:54

    hi,
    we too got the same request from the client.
    we create another pivot table with same fields and displayed only the grand total column to the view and added that to the down of existing pivot table (separate pivote view) in the compound layout. it is another pivot view that shows the grand total...here in your case
    SUM (Base - Atipicos) 50.085.520,24 56.432.759,16 59.605.568,31:
    try in this way...
    in my sense i didnt find another solution...if you find workaround then plz explain me aswell.
    i hope its helps you...
    Thanks,
    mani.

  • Pivot table subtraction row

    Hi there,
    Is it possible to subtract the values of two rows in a pivot table and show as the third row if we can assure that there will always be only two rows in the pivot table?
    Pivot table view:
    h2. Year  M01   M02   M03    Q01 Total_
    *2009*    493    437    529    *1459*
    *2010*    599    579    643    *1,821*
    Problem: I am trying to generate another row in the bottom (In the place of Grand Total) and show the result of M01-M02.
    Underlying data columns:
    Year, Month, Quarter, #Orders
    Underlying Filter: (this assures 2 years)
    Year IN "Previous Year", "Current Year"
    Version: OBIEE 10
    thanks!
    Edited by: obitime on Dec 28, 2011 9:45 PM

    Instead of using a pivot table that way, create seperate measures using the filter function:
    current year amt = filter(measure using year=[current year])
    previous year amt = filter(measure using year=[current year] - 1)
    change amt = filter(measure using year=[current year]) - filter(measure using year=[current year] - 1)
    You may want to define [current year] using a prompt which sets a variable.
    A second option is to write a formula like case when year = [current year] then 'Current Year' else 'Previous Year' end, and use that in your pivot table in place of Year. That way you can create your calculated item formula on something more dynamic.
    Regards,
    Robert

  • Extra Measure/Column on Pivot Table

    Hi at all,
    i have a problem about the pivot table in obiee11g. I need an extra measure/column or a new table/pivot-table with new measures out of an other fact-table riht behind the first pivot table wich depends on the first pivot-table.
    Thx

    Pull columns from both fact-tables, create 2 pivot tables.
    Pivot table 1 is with 1st fact table and exclude measures from other fact table.
    Pivot table 2 is with 2nd fact table and exclude measures from 1st fact table.
    Add 2 Pivot views in the analysis
    If it is helpful, please mark as correct or helpful
    If this not helped, let us know in detail with columns for both pivot tables

  • Top 10 rows in a pivot table

    Hello,
    I have an requirement to retrieve top 10 rows from the output pivot table.
    Data on pivot table is structured as follows
    Rows                                                                                  Measures
    "Name" "Grade" "Value North" "Value South" "Total Value"
    ABC A 100 200 300
    BCD B 200 300 500
    In the output there are 50 such rows and I want to display the top 10 rows with max Total Value.
    Is it possible to achieve in OBIEE?
    Any help is appreciated.
    Regards,
    Mukesh
    Edited by: user612929 on May 18, 2010 12:38 AM
    Edited by: user612929 on May 18, 2010 12:39 AM
    Edited by: user612929 on May 18, 2010 12:41 AM

    Thanks or your reply.
    I think I have not explained the issue correctly.
    Source data is like this
    "Name" "Grade" "Region" "Value "
    ABC A North 100
    ABC A South 200
    BCD B North 200
    BCD B South 300
    So there is no Total value column in the report criteria.
    I am using Pivot table to pivot the rows for ABC and BCD into a single row and then using the measure agreegation to generate Total Value column in pivot table only. The filter "is Top 10" available in report criteria so can not be applied on the pivot table.
    Will try to implement the solution provided by BTK.
    Regards,
    Mukesh

  • Suppress '0' rows in a pivot table

    In a pivot table, if I have a crosstab like this
    Jun Jul Aug Sept Oct November
    companya 8 2 1 10 8 7
    companyb 1 3 2 23 2 1
    companyc 0 0 0 0 0 0
    companyd 12 13 3 1 2 41
    How would I suppress row 3? I want to suppress every row that is all '0'.

    Thanks or your reply.
    I think I have not explained the issue correctly.
    Source data is like this
    "Name" "Grade" "Region" "Value "
    ABC A North 100
    ABC A South 200
    BCD B North 200
    BCD B South 300
    So there is no Total value column in the report criteria.
    I am using Pivot table to pivot the rows for ABC and BCD into a single row and then using the measure agreegation to generate Total Value column in pivot table only. The filter "is Top 10" available in report criteria so can not be applied on the pivot table.
    Will try to implement the solution provided by BTK.
    Regards,
    Mukesh

  • Customizing the Cell Content of a Pivot Table

    Hi,
    I have been away from ADF for a few years (since 10g v 1.3.1) and am quite impressed with all the Faces functionality added to the 11g release. The application I wrote relied heavily on pivot tables which back then, I had to use stored procedures in the database and dynamically views to display information. I am very interested in moving this application to 11g and taking advantage of the PivotTable component. One thing the application does is change the style of cells based upon the object being presented. I have been reading:
    Oracle® Fusion Middleware
    Web User Interface Developer's Guide for Oracle Application
    Development Framework
    11g Release 1 (11.1.1)
    B31973-03
    And am very interested in section 26.8 Customizing the Cell Content of a Pivot Table.
    I easily created a pivot table and would like to change the formatting of various cells. I created a backing bean for a test page and added the Example 26–4 Sample Code to Change Style and Text Style in a Pivot Table to the bean.
    public CellFormat getDataFormat(DataCellContext cxt)
    CellFormat cellFormat = new CellFormat(null, null, null);
    QDR qdr = cxt.getQDR();
    //Obtain a reference to the product category column.
    Object productCateg = qdr.getDimMember("ProductCategory");
    //Obtain a reference to the product column.
    Object product = qdr.getDimMember("ProductId");
    if (productCateg != null && productCateg.toString().equals("Sales Total"))
    cellFormat.setTextStyle("font-weight:bold")
    cellFormat.setStyle("background-color:#C0C0C0");
    else if (product != null && product.toString().equals("Sales Total")
    cellFormat.setTextStyle("font-weight:bold");
    cellFormat.setStyle("background-color:#C0C0C0");
    return cellFormat;
    Almost verbatim except changed the literals to select data in my use case domain. My question is: How do I invoke this message from my pivot table? I need to pass it a instance of the DataCellContext. The example is great and illustrates what I am looking to do but does not go into the implementation details required. Is there a sample app available for download that demonstrates these capabilities?
    Thanks,
    Jeff
    Edited by: jcapzz on Jun 9, 2011 3:56 PM

    Hello,
    I haven't fully understood your question.
    Is it: How do I call the getDataFormat() method from my pivot table?
    If so , you need to set the dataFormat attribute of your pivot table.
    ex: <dvt:pivotTable id="pt2" var="cellData" varStatus="cellStatus"
    value="#{bindings.YourView.pivotTableModel}"
    headerFormat="#{viewScope.yourBean.getHeaderFormat}"
    *dataFormat="#{viewScope.yourBean.getDataFormat}"*
    contentDelivery="immediate" pivotEnabled="false"
    columnFetchSize="-1" rowFetchSize="-1"
    />
    I also put the *headerFormat* attribute which allows to customize the headers
    I hope I understood your question ;)
    Jack

  • How to update ADF VO object to refresh the data in ADF Pivot table

    I need to know how to update the View object so that the date in pivot table is refreshed/updated/filtered.
    here are the steps I performed to create ADF pivot table application using VO at design time.
    1) created a collection in a Data Control (ViewObject in an ApplicationModule) that provides the values I wanted to use for row and column labels as well the cell values (Used the SQL query)
    2) Dragged this collection to the page in which wanted to create the pivot table
    3) In the pivot table data binding editor specified the characteristics of the rows (which attribute(s) should be displayed in header), the columns (likewise) and the cells.
    Now, I have a requirement to update/filter the data in pivot table on click of check box and my question is how to I update the View object so that the date in pivot table is refreshed/updated/filtered.
    I have got this solution from one of the contact in which a WHERE clause on an underlying VO is updated based upon input from a Slider control. In essence, the value of the control is sent to a backing bean, and then the backing bean uses this input to call the "filterVO" method on the corresponding AppModule:
    but, I'm getting "operationBinding" object as NULL in following code. Please let me know what's wrong.
    here is the code
    Our slider component will look like
    <af:selectBooleanCheckbox label="Unit" value="#{PivotTableBean.dataValue}"
    autoSubmit="true" />
    The setDataValue() method in the backing bean will get a handle to AM and will execute the "filterVO" method in that, which takes the NumberRange as the input parameter.
    public void setDataValue(boolean value) {
    DataValue = value;
    BindingContainer bindings = getBindings();
    OperationBinding operationBinding = (OperationBinding)bindings.getOperationBinding("filterVO");
    Object result = operationBinding.execute();
    The filterVO method in the AMImpl.java will get the true or false and set the where Clause for the VO query to show values.
    public void filterVO(boolean value) {
    if (value != null) {
    ViewObjectImpl ibVO = getVO1();
    ibVO.setWhereClause("PRODUCT_TOTAL_REVENUE(+) where rownum < 10");
    ibVO.executeQuery();
    }

    Did you define a filterVO action in your pagedef.xml file?
    You might want to read on how to access service method from a JSF Web Application in the ADF Developer Guide for 10.1.3 chapter 8.5

  • How to make a layer from the ADF pivot table invisible , show-hide column-row-data

    Hello all ,
    I need to create a pivottable with ADF 12c for reporting purposes.
    I have a table or view with 10 items of type VARCHAR2 , C1,C2,C3,C4,C5,C6,C7,C8,C9,C10  and   10 items of type NUMBER N1,N2,N3,N4,N5,N6,N7,N8,N9,N10
    The items of type VARCHAR2 are for Column and Row areas and the items NUMBER are for Data Areas
    I want to create a jsf page with one empty pivottable and in code Show or Hide the items in the Column area , Row area , Data area
    Con you send me a small sample ?
    I test with this code that i find in oracle OTN but not work.
    <dvt:pivotTable id="pt2" value="#{bindings.WebPivotDataView1.pivotTableModel}" var="cellData"
    varStatus="cellStatus" splitMode="enabled"
    binding="#{backingBeanScope.CmfPivotBean.pivotTable}"
    >
    <dvt:headerCell>
    <af:switcher facetName="#{cellData.layerName}" defaultFacet="Default" id="s1">
    <f:facet name="DataLayer">
    <af:outputText value="#{cellData.label}" id="ot1"/>
    </f:facet>
    <f:facet name="C01">
    <af:outputText value="#{cellData.dataValue}" id="ot2"/>
    </f:facet>
    <f:facet name="Default">
    <af:outputText value="#{cellData.dataValue}" id="ot3"/>
    </f:facet>
    </af:switcher>
    </dvt:headerCell>
    <dvt:dataCell>
    <af:switcher facetName="#{cellStatus.members.DataLayer.value}" defaultFacet="Default" id="s2">
    <f:facet name="N01">
    <af:outputText value="#{cellData.dataValue}" id="ot4">
    <af:convertNumber groupingUsed="false"
    pattern="#{bindings.WebPivotDataView1.hints.N01.format}"/>
    </af:outputText>
    </f:facet>
    <f:facet name="Default">
    <af:outputText value="#{cellData.dataValue}" id="ot5"/>
    </f:facet>
    </af:switcher>
    </dvt:dataCell>
    </dvt:pivotTable>
    DCBindingContainer bindingContainer = (DCBindingContainer)ADFContext.getCurrent().getRequestScope().get("bindings");
    CubicBinding cubicBinding = (CubicBinding)bindingContainer.findCtrlBinding("WebPivotDataView1");
    CubicEditor cubicEditor = cubicBinding.getCubicEditor();
    cubicEditor.removeLayer(DataDirector.ROW_EDGE, 0); //remove 1st row edge
    cubicEditor.removeLayer(DataDirector.COLUMN_EDGE, 0); // remove 1st column edge
    cubicEditor.removeDataItem(0);
    CubicDefinition def;
    def = cubicBinding.getProjection();
    LayerDefinition layerDefinition = new LayerDefinition("C3");
    cubicEditor.addLayer(DataDirector.ROW_EDGE, 0, layerDefinition);    
    LayerDefinition layerDefinition2 = new LayerDefinition("C4");
    cubicEditor.addLayer(DataDirector.COLUMN_EDGE, 0, layerDefinition2);
    DataItemDefinition def3 = new DataItemDefinition("N1");
    cubicEditor.addDataItem(def3);
    AdfFacesContext.getCurrentInstance().addPartialTarget(pivotTable);
    Can you help me if is possible to create a pivottable binding to a one ViewObject and in code show/hide or compose the layout of the pivottable ??
    I search in google and OTN oracle and not find any code.
    Only find the code of the samples that is very complex for me , the code of the samples create the PivotTableModel from one Array , and i want to binding from one ADB BC ViewObject.
    Thanks in advance

    The solution I presented for your use case an DOAG 2013 was to create a pivot table binding out of user defined attributes from the table. For the defined attributes a VO is dynamically created as well as the pivot binding. The pivot binding is then exchanged at runtime together with the activation of the dynamic VO needed to only get the data needed for the particularly pivot table.
    Your solution using the CubicEditor is hard to implement due to the missing documentation. This was the reason I did not follow this approach, However it's not impossible (done it on a very small scale).
    None of the solution are what I call simple. They are complicated, complex and in part not supported solution (exchanging the pivot table binding at runtime need to use internal classes, which is not supported).
    I can't give you a working sample as it's too complex. I can make the slides available, however they are in German.
    Timo

  • Custom sort pivot table columns with Essbase as the data source

    Is it possible to sort columns in a pivot table according to an arbitrary value that I define when the data is coming from Essbase?
    For example, say I have a dimension called Soda, with values Coke, Diet Coke, Dr. Pepper and Diet Dr. Pepper. I create a report with a sales measure with the measure labels on the rows and the Soda dimension on the column. By default the columns will be sorted alphabetically:
    Coke Diet Coke Diet Dr. Pepper Dr. Pepper
    Sales 1M .5M .75M 1.25M
    I want to create a report that looks like this:
    Coke Diet Coke Diet Dr. Pepper Dr. Pepper
    Sales
    I think I could do this if the source was relational just by creating bins or creating a custom column with a case statement that assigns each Soda an arbitrary value and then sort on this value. Everything I've tried with Essbase as the source, though, results in:
    State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 42043] An external aggregate is found in an outer query block. (HY000)
    Any ideas?

    Hi,
    1. You can try solve the 'An external aggregate is found in an outer query block' by changing aggregation rule for your measure both in physical and business layer.
    By default it's set to Aggr_External - change it to Sum
    In physical : Column properties->Aggregation rule
    In business model : Column properties->Aggregation tab -> Default aggregation rule.
    This may change the result - after changing check whether you still get correct values.
    2. Also, in case the desired order is the same as the order of members in the Essbase cube, and you want to leave Aggr_External, you can create a calculated column that will help you with the sort.
    See http://oraclebizint.wordpress.com/2008/04/28/oracle-bi-ee-101332-handling-sort-order-in-hyperion-essbase-931-evaluate-and-mdx/
    Hope this helps,
    Alex

  • ADF -11g : Question on how to create a pivot table

    Hi,
    I am trying to create a dynamic pivot table (the number of column and row layers change for each request) and I cannot use a data base structure to back it up.
    I thought of doing it through a managed bean but in order to do it I need to know how to create the PivotTableModel.
    The pivot table model requires a data source object and I do not know how to create it to support multiple row and column layers.
    Is there a default data source object that I can extend, or better yet is there a written example on how to create a pivot table model using a managed bean.
    Thanks,
    Or
    Edited by: user638363 on Dec 18, 2008 7:02 AM

    Hi,
    beyond the documentation, the pivot table is described in
    http://technology.amis.nl/blog/2593/adf-faces-11g-reloading-the-matrix-using-the-pivot-table-component
    http://technology.amis.nl/blog/3786/creating-a-salary-heat-map-with-the-adf-11g-faces-pivottable-component
    http://technology.amis.nl/blog/3673/adf-11g-richfaces-a-closer-look-at-the-pivot-table-data-visualization-component
    I am not aware of any sample that directly meets your requirement
    Frank

  • How to make a layer from the ADF pivot table invisible?

    Hi all,
    ADF pivot table is a useful component which can be used to provide table data rendering. However, I have not found any method to hide one layer from the row edge (or column edge) of the pivot table.
    For example, please have a look on this demo: [http://jdevadf.oracle.com/adf-richclient-demo/faces/components/pivotTable.jspx]
    There are two layers in the row edge of this pivot table, one is Time, one is Product. For product, there are two categories, one is Tents, one is Canoes.
    Is that possible to make the Product layer invisible from user, while still keeping the two rows of product data for that year showing up? how to do it?
    The problem is that pivot table relies on the product layer to separate the two rows of product data, and if I remove the product layer, only the second row of product data for each year can be shown up.
    Please advise how I can make the Product layer invisible.
    Thanks
    Richard
    Edited by: user12847742 on Oct 6, 2010 12:58 AM
    Edited by: user12847742 on Oct 6, 2010 1:04 AM
    Edited by: user12847742 on Oct 6, 2010 1:10 AM

    Hi, Yiannis,
    Thanks for the clarification.
    First, for clarity, I'd like to point out that you and Richard are inquiring about different functionality. Richard wanted to hide a layer that is logically present on the edge, so that there are still separate rows for Tents and Canoes, but without row headers indicating which row is which. As I noted previously, this is currently unsupported.
    By contrast, you're asking about truly removing a layer from the edge. For rowset DataControls, this can be done using the CubicEditor interface. Given the following PivotTable:
    <dvt:pivotTable id="pivotTable1" value="#{bindings.Record.pivotTableModel}"/>the CubicEditor can be retrieved by calling:
    DCBindingContainer bindingContainer = (DCBindingContainer)ADFContext.getCurrent().getRequestScope().get("bindings");
    CubicBinding cubicBinding = (CubicBinding)bindingContainer.findCtrlBinding("Record");
    CubicEditor cubicEditor = cubicBinding.getCubicEditor();You can then add a layer:
    LayerDefinition layerDefinition = new LayerDefinition("Product");
    cubicEditor.addLayer(DataDirector.ROW_EDGE, 1, layerDefinition);and remove a layer:
    cubicEditor.removeLayer(DataDirector.COLUMN_EDGE, 0);At the end, you'll need to PPR the Pivot Table.
    Hope that helps.
    Jim

  • Does ADF pivot table in JDeveloper 11.1.1.2.0 have a maximum number of rows

    Does ADF pivot table in JDeveloper 11.1.1.2.0 have a maximum number of rows that can be fetched from the database?

    mmurmeli,
    Seems then that you've identified how to allow more rows (increase the heap space) ;)
    Hard physical limits aside, there is a practical limit to how much information a single human mind can absorb.
    John

Maybe you are looking for

  • Wife about to give birth and Disk Utility failing to repair HD.

    Good morning. Starting last night I began having serious issues with my 2007 20" 2.4ghz iMac. I hope someone can help before I employ the "nuke" option. First a little background. My wife is about to give birth to our second child. I have several in-

  • Upgraded to 7.6 now can't use search feature

    I just got a second ipod, a nano, and it required me to upgrade my itunes software. Now I can't search the library. Letters I put in the search field make no sense when the tunes come up. Any ideas???

  • Due date payment restriction during manual payment posting

    Hi Team. We have a requirement to pay bills only after the due date is over,and not before that. For Ex :- If i have payment terms of 30 days and i am booking invoice on 1st of mar then due date would be 31st of mar. our requirement is to pay this bi

  • How to remove duplicate phone numbers under iMessage settings?

    I've been using iMessage for a while now and a lot of my friends have brought to my attention that every iMessage I sent showed it came from my email rather than my phone number. So I signed out of iMessage and tried logging back in using my phone nu

  • Problem in writing to the file

    I use this labview code to read and save some electrical measurement data from a set of instruments. I am having a problem that the code stops writing to the file after a while. It stops responding too. The only way to stop it then is to use the task