Adhoc Query on MSS Report

Hi Experts,
Would like to know, how to add Adhoc query on MSS reports? Tried to search the thread but couldn't find anything.
Really appreciate kind guidance on the same.
Thanks,
Aashish

Hi,
You can remove it by following ways
Go to SPRO
Then follow following path
Integration with Other mySAP.com Components -> Business Packages / Functional Packages -> Manager Self-Service (mySAP ERP) -> Reporting -> Set Up LaunchPad
and execute
then you can get the list of the REports
over there you can see "Birthday List" Report and Deactivate it
Please execute this steps before the executing the steps i have mentioned above, this will activate the reports used for MSS. Then gofor moving the unwanted reports unactive folder. Just what you have to do it select the unwanted report and move it down to the inactive folder.
1. In the SAP HCM System choose:
SAP Easy Access Menu
Transaction SE38
2. In the ABAP Editor: Initial Screen enter the Program FPB_LP_WRITE_ENTRIES and choose Execute.
3. In the Report FPB_LP_WRITE_ENTRIES screen select the MSS Reporting and MSS with Folders options and deselect the checkbox Test Run.
4. Choose Execute. The sample entries are entered in the Report Launchpad in the portal.
5. Log on to the portal with User manager1 and check if the sample entries are displayed.
6. In the ECC system leave the transaction and go back to the SAP Easy Access Menu.
7. Enter transaction PWPC_CONV_MDT_TO_LPA in the Command field.
8. In the Report to convert MDT table entries to LPA table entries screen, enter the MDT Scenario RPT0 and deselect the Test run checkbox.
9. Choose Execute. The list in the next screen shows the reports which have been added to the Report Launchpad.
Do not forget to select MSS with Folders for the FPB_LP_WRITE_ENTRIES report. Otherwise you may get short dumps while editing the report launchpad, because the reports coming from the Manageru2019s Desktop do not have folders.

Similar Messages

  • Adhoc Query on MSS

    Experts,
    I would like to know, how to add custom Adhoc query on MSS reports? please advice.
    Thanks
    Francis

    You can check here
    http://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=199820849
    just create and then backend in SIMG_SPORT, that is in launch pad you can add thsi easily

  • Adhoc Query: Absence Leave report

    Hi All,
    I am trying to create a Query in Adhoc query for ABSENCE LIST.
    so i have added few columns:
    PERNR Value
    PERNR TEXT
    Personnel area Value
    Personnel area Text
    Personnel sub-area Value
    Personnel sub-area Text
    Company code Value
    Company code Text
    Postion name Text
    Attendance or absence type value
    Attendance or absence type Text
    1. Here when i pick the Position from infotype 0001 it is displaying some default position along with the position
    2. I need the list of employee who has taken leaves, and leave types are picked from infotype 2001. Here i am getting complete list of employees(employees who has not taken leaves)
    So can we prepare a report employees who went on leaves based on the above requirement.
    Please find the attachment.
    Regards,
    Prasad

    On a more serious note,
    A query is a simple spitting out of all the data, based on the fields you have selected, So if atleast one field has a valid value, and "Personnel Number" is one such field, you will get an output in the report.
    What you will have to do is to assign certain key fields as selection fields as well as output fields, when designing the Ad-Hoc query.
    Then use selection criteria to get out only the results you want, for example Absence Type = Annual Leave( don't want to type the abbreviation here), date range of BEGDA - 01.01.2014 - 30.04.2014, for example. Using Employment Status as a Selection field but not an Output field can help with ensuring inactive employees (i.e people with default positions) are not selected.
    I often find that in any case, one always has to download the query output into Excel and do some final manipulations using filters and pivots etc.
    Also, play around with the Key Date  field,  in the query design screen - see what happens if you use "Today" rather than a wider date range.
    Hope this helps.

  • Query regarding MSS reports

    Hi,
    For some MSS reports ( Staff Assignments, Position Description, Bonus report, Staff Gains, Staff Losses, Nominal Rolls, TWA Reports) when executed for "Direct Reports" and "All Employees" from the drop down, showing error as " You must select atleast one suitable object before starting the report" although all the employees or atleast one of them is selected. It would be great if anyone can suggest as to what is causing this error?
    Thanks,
    Toa

    Swetha,
    Only way you can get all those iviews is transport those iviews  from other systems like QA ,Prodif they are already installed on them.
    I suggest you create a copy of standard role and work on it
    Thanks
    Bala Duvvuri

  • Question regarding AdHoc Query

    I have to write a single adhoc query whose output will be two different reports.
    One report should display pernr,perid, firstname, lastname, age, years of service, hire date,birthdate,
    job title. The other should display pernr, firstname, lastname,hiredate, birthdate and department. So when first report is displayed the field department should be hidden and viceversa. Is it possible using adhoc query or custom report is better option. Any inputs will be highly appreciated.
    Thanks

    Hi,
    Please check OSS notes 333517 and 357093. Both notes, though from 2000, contain detailed functionality and recommendation around u201Clength of serviceu201D.
    Hope this helps.
    Donnie

  • OBIEE 11.1.1.6.x - Report an Image in Adhoc Query

    Hello Everyone,
    We are trying to generate an Adhoc query on an attribute with image. We are on 11.1.1.6.2. We cannot get that to work.
    The column data type is BLOB.  Please share your ideas or experiences on reporting such data types.
    Thank you,
    PD

    Check this Oracle BI EE 10.1.3.32 – Displaying BLOB images – Using Pl/SQL Gateway « Business Intellig…

  • Adhoc Query report not working fine

    Hi,
    We have a customized infotype  9222 which stores the previous experience of the employees.
    Now I have created a adhoc query in which I have added this infotype.The problem which I am facing is when I put the Indian company codes and run the report, the report is working fine . But when I put a Ukraine Company Code and then run the report ; the report does not picks the experience details of the employees and it shows Zero Yrs and Zero months.
    I have checked in PA30 the experience details are maintained  for the Ukraine employees.
    Is their any setting in the system which allows the infotype for a particular company? or what may be the reason for the strange behaviour of the report towards a specific compant code. Please reply asap

    Hi ,
    Pls check do you have authorization or not for to create Object Directory entry.
    Thanks and Regards,
    Revathi.

  • ADhoc query : reporting error

    Hi Experts
    I am getting an error with Adhoc query.
    When ever i open a report in the transaction code S_PH0_48000513,the query is not allowing me to open the report.
    Any help in this regard wud be appreciated.
    thanks

    Hello,
    Please be sure that you are using right <b>Work Area</b> and <b>User Group</b>.select the query and double click on the infoset name. I hope it will work.
    please reward points if the answer helps you.

  • Adhoc Query Report

    Hi SAPients..
    I have a n issue in Adhoc Query
    In Adhoc query report ( PQAH ), X person having authorization to see the folder Additional Personal Data (IT0077), but Y person can access the Adoc but could not see the folder (IT0077). Please guide what should I do to make the Y person can view the (IT0077) folder??
    Appreciate your support on this, Please guide me.
    Shan

    Hi Shan,
    What I undertand is as follows:
    Person is having access to view IT77 and Y person is having access to t code - PQAH (Ad Hoc Reprot). you want to give Y person access of IT77.
    In this case you would need to add the concerned role to y person's SAP user id by which he ll get acces to maintain IT77 ands also can download the report. The role name you can get from your security team or GRC team.
    Hope this solves your query.
    Sarang Kulkarni

  • Automating ADHOC query reports to generate Emails

    Hi Experts
    Hope you guys are doing fine.
    I have a requirement where we need to automate the ADHOC query reports to trigger emails with the Excel attachment of the report to a set of users.
    To explain in detail,we have some adhoc queries which are run manually on monthly basis(by our functional guys).Once the output report is generated,they used to download them into Excel document and send that to a set of users as an email attachment.
    Now we are planning to automate the entire process,so that these query reports once set to run on monthly basis should trigger emails to set of users with the excel attachment.
    Now,i am looking for solution on how to proceed on this.Since the program behind the query(which starts with AQ*) is not be a modifiable program,i can write any custom code here.Alternately,i planned to set a background job which runs the query and then use a  custom pgm which reads the spool no for the pgm and then to read the data from the spool into an internal table and then use a FM to send the internal table data as an email attachment.But wasn't sure of what FM's to use to read the spool no. and data from the spool.
    Is there any alternate way to work on this or any suggestions on my assumed process would be really appreciated.
    Thanks

    Ok, here's what you do:
    - Go to T/C: SQ01 and find your query
    - From the menu at the top select Query>More functions>Display Report Name (copy the report name)
    - Go to Transaction SO23 and create a new shared distribution list - give it a name and title, click the dropdown on folder and click the create folder button, give the folder a name and save/green tick.
    - Click on the Dist. list content tab and enter all the external email addresses that the report should go to ( the recipient type should be internet address or via internet or something like that)
    - Go to Transaction SM36 and click on the Job wizard button, go through the wizard entering the program name we copied earlier. In the print parameters section make sure it is set to print immediately, then on the spool list recipients button select the dropdown box, select distributions lists and find the one you created earlier. Define the variants, periods, time etc etc
    - When the job runs it will process the output via SAPConnect (transaction SCOT) you will be able to see the status of the emails by going to transaction SCOT and selecting the menu option Utilities>Overview send requests.
    Job Done, Chillax
    PS: remember the output type of the query in SQ01 needs to be set to excel or whatever you require otherwise a PDF/html attachment will be created in the email.
    PPS: If SAPConnect is not set up in your system speak to your basis guy to set it up - If you don't have any basis resource, it is really easy to set up, plenty of guides around.

  • Where do we specify Report category in HR Adhoc query

    Hi All.
    We have a standard query which shows a selection screen which is different in Production. When I went into the program behind the query and saw the report category, it is different in both the environments.
    I am not able to find where do we specify report category in the HR adhoc query.
    Can anyone please guide?
    Also, how is this possible that a standard report has different report category in Development and production env. ?
    Any help would be appreciated.
    Aishi

    Hi,
    There is no place in query, to maintain report category. Whenever an query is created, this table gets updated with default report category depending upon the LDB used. Now if you want to change this default screen to some other screen, then this is the only table where you can change the report category for that query or program.
    According to me, you have to maintain this table only, if you want different report category, since there is no place in query where you can do this.
    Hope this helps.
    Thanks,
    Sarika.

  • Can an Infoset (Adhoc) Query Report be Run using a Variant ?

    Hi
    We have a lot of users that have access to infoset (adhoc) query tool but where they are not authorised to save queries in the system. They have the ability to create new reports and also open up existing reports using Open query button.
    My question is whether the user can run an existing report using the Variant if one exists and how they select to run the report with a variant, and also whether a user can edit a variant for an existing report.
    Any help on this would be much appreciated.
    Nicola

    Hi
    The usersd do not have SQ01. They only have S_PH0_48000513 - Ad Hoc Query since SQ01 is a sensitive transaction as access to it should be restricted. Hence our users can go into adhoc query and open existing queries etc.
    I do not see any button Execute with Variant when in Infoset (Adhoc) Query view. Might you be able to advise?
    Thanks a lot
    Nicola

  • How Transportation of Adhoc Query is done through RSAQR3TR report.

    Hi,
    How Transportation of Adhoc Query is done through RSAQR3TR report.i want to transport a new usergroup, new infoset and a query from Develpment to Quality and Production.
    I have gone through the documentation of the RSAQR3TR report and as well as the SAP library material, but still i am confused.
    Please help

    Hi,
    http://www.sap-img.com/basis/transport-of-abap-query.htm
    Hope this helps.
    Regards,
    Rashmi

  • Unable to report adhoc query output on HRP tables

    Hi All,
    I am using adhoc query to report the data from HRP table (customised) but the data is not being picked even though the table has the records. The fields from the field group and the infotype fields are properly mapped but the output is blank.
    Any pointers/suggestions on how we can achieve this would be helpful.

    @ semvladigo : Thanks for the reply. Could you please let me know further info on the standard functionality.
    @ Albert : Thanks for the input. I am in PA and using PNPCE but it is not working with this LDB. 
                      When I query (in PCH) I am not getting results when I select 'ALL' in the reporting period.
                      It worked fine when infoset built in PCH LDB with reporting period other than 'ALL' (like Today, Keydate).
                      Please advise.

  • Problem in adhoc query

    Hi All,
    This is regarding a problem in the adhoc query.
    For one adhoc query in the selection field only personnel number is there. The adhoc query selects from 0022-infotype.In this case if the reporting period is ALL, all infotype records belonging to 0022 infotype are selected. Even if the end date of the infotype record is less than the initial date of Org.assignment.
    For the second adhoc query in the selction field only
    personnel area is there. In this case the adhoc query doesnot select infotype record belonging to 0022 infotype
    if the end date of the infotype record is less than the Org.assignment.
    Can anyone explain me this strange behaviour.
    Points will be rewarded.
    Regards,
    Aravind

    Some more additional info about the problem.
    Suppose in the selection screen there are 4 fields
    Company code, Personnel area, Personnel sub area and Personnel number.
    If you fill both Personnel subarea and personnel number,
    data record belonging to education infotype but whose end date is greater than the start date of Org.assignment
    infotype is not selected.
    But if you fill only personnel number the same data record belonging to education infotype is shown with blank values for Org.assignment.
    I tried debugging and found out that in the first case
    since there is no Org. assignment record for the time period of the education infotype nothing is shown.
    In the second case, it is allowed to be shown with blank values for Org.assignment.
    Any explanation for this behaviour?

Maybe you are looking for