Adjusting canon G10 raw in elements 8

I'm using the trial version before I buy. The Camera Raw plugin in the program is 5.5.0.97. I can open the raw file in editor, but it doesn't bring up the raw editing sliders. Is it because I'm using the trial version, or do I need to do soemthing in set up.

Hi,
Can you please tell which OS are you using?
Also that you are talking about the Profiles or the adjustment setting sliders on the right?
Neways, you can try updating the Camera Raw plugin and see if thhis solves the problem.
Cheers
Swarnima

Similar Messages

How can i decode Canon T4i raw with Elements 10?

How can i decode Canon T4i raw with Elements 10?

It's not possible. T4i requires ACR 7.1 and that only comes with PSE 11, PS CS6 and LR4. You need to upgrade.
Mylenium

Canon G10 Raw Shots

So I think I realize that I cannot use my antiquated Photoshop 5 with RAW shots taken on my Canon G10. However I was not able to get any assistance from the help line as to which version I need to upgrade to. I don't have an open bank account so if anyone could make a suggestion as to which is the most cost effective that would work I would greatly appreciate it. I'm starting to think that shooting in RAW was a mistake. All are underwater pictures taken in Bonaire and I would really like to work with them

If by version 5 of Photoshop you mean just plain Photoshop 5.0 from the late 90s or early 2000's, then it is too old to upgrade to the current version of Photoshop which is 11 or CS4 and you cannot buy an earlier version of Photoshop, either, so the answer to your question is that you need to buy Photoshop 11 at the full price if you actually want to use Photoshop directly with your RAW images.
You may be talking about some other product with Photoshop in its name, like Photoshop Elements or Photoshop Premier (video) or Photoshop Lightroom, but the answer to what version to upgrade to is still likely the same, unless, perhaps Photoshop Elements 5 is still a valid candidate for the current version of Photoshop Elements which is 8.
You may also be talking about Adobe Camera RAW version 5 and since the current version of ACR is 5.6 and upgrades from ACR 5.x to 5.6 would be free, there is no upgrade cost. ACR 5.x shipped with Photoshop 11 or CS4 so you'd be set by just performing the latest ACR update.
If you don't want to spend $600-ish on PS-CS4 then you could spend half that and get Lightroom 2, now, or even use the LR3 beta from labs.adobe.com until next April and then buy LR3 for $300-ish.
However, if you don't want to spend even that amount of money, then I'd suggest getting Photoshop Elements 8 for around $99 and update it (manually according to the instructions on the ACR update pages) to ACR 5.6 and you'll be able to work with your images one-by-one, which is not as slick as doing multiple images in ACR as hosted in Photoshop, itself, but you'd be using the current ACR technology.
There may be version differences I am not that up on if you are on a Mac and using Elements, where perhaps PSE5 is not that old compared to the currently available version and possibly upgradable to whatever the current Mac version of Elements is.
If none of this answers your question, then be more specific as to what Photoshop 5 means, exactly, since many products have Photoshop in their name.

Canon G10 RAW in CS2?

I use CS2 successfully with my Canon 5DMk1 RAW images, but even though it appears to be fully updated it won't read RAW from my G10. Is there a plug in for the G10, or do I have to upgrade to a later version of CS? Must I go to CS4, or will CS3 work?

You need the latest version of the DNG Converter, available here:
http://www.adobe.com/products/dng/
(see right side of page for download links)
Eric
I use CS2 successfully with my Canon 5DMk1 RAW images, but even though it
appears to be fully updated it won't read RAW from my G10. Is there a plug in
for the G10, or do I have to upgrade to a later version of CS? Must I go to
CS4, or will CS3 work?

Canon G10 Raw and Others fixed

Check you software update for:
This update extends RAW file compatibility for Aperture 2 and iPhoto ’08 for the following cameras:
Canon EOS 5D Mark II
Canon PowerShot G10
Pentax K2000/K-m
Leaf AFi-II 6
Leaf AFi-II 7
Leaf Aptus-II 6
Leaf Aptus-II 7
Leica M8.2
It also addresses issues related to specific cameras and overall stability.
Happy Holidays...

Check you software update for:
This update extends RAW file compatibility for Aperture 2 and iPhoto ’08 for the following cameras:
Canon EOS 5D Mark II
Canon PowerShot G10
Pentax K2000/K-m
Leaf AFi-II 6
Leaf AFi-II 7
Leaf Aptus-II 6
Leaf Aptus-II 7
Leica M8.2
It also addresses issues related to specific cameras and overall stability.
Happy Holidays...

Opening canon cr2 raw in elements 10

i have tried opening canon cr2 files from canon 650d in elements 10 but no luck why? only way was DNG converter.
mike hawthorne

Since pse 10 can only use up to camera raw 6.7 and the canon 650d requires at least camera raw 7.1
that is why you need to use the dng converter.
Camera Raw plug-in | Supported cameras
Camera Raw-compatible Adobe applications
Newer photoshop elements versions pse 11, 12 and 13 can open those files without the need to convert them using the dng converter.

Processing Canon G10 RAW Images in CS3 and Lightroom 2.1

I've not found a post on point. If I've missed one, sorry.
Contemplating getting a G10. After research here's what I understand. Please, correct me if I am wrong:
1. To process a G10 image in ACR, one has to have 5.2. One cannot use 5.2 in CS3. To process the image in CS3 one has to first convert to DNG. This can be done by way of a separate converter OR in Lightroom 2.1, on import.
2. Lightroom 2.1 will process the image in either RAW or DNG formats.
So, since I own both Lightroom and CS3 -- I will be able to use ACR in Lightroom if I don't want to convert to DNG first.
Am I right?
I don't want to buy the camera if I can't use my usual workflow.
Thanks.
sjh
PS. I think my CS4 Master Suite will arrive tomorrow. But, there is a lot of odd information about ACR and the G10 out there so I thought I'd take the time to clear it up and see if I got it right.

Lightroom 2.1 does NOT support native files from the G10. LR 2.2, which will be released in December will. So for both programs you need to use the Adobe DNG converter 5.2 to convert to DNG for the time being. It is unclear whether when you have LR 2.2 and CS3 installed whether "Edit in Photoshop" will work correctly with files from cameras such as the G10. It will always work fine if you use dng.

CS4 MAC Canon G10 RAW file panorama stitch problem problem

Hi,
I was loading 5 RAW files into CS4 auto stitch. The file view fine a thumbnails in ACR 5.2 and Bridge but I noticed that when I was attempting to select which images to select for stitching in CS4 that the I could not see thumbnail detail in the selection view panel. After I selected the images I wanted by file name CS4 crashed when I tried to start the panorama stitching process... Anyone else had problems like this?
MacPro 2.66 GHZ dual core. 6GB RAM and Latest version of CS4, ACR on Leopard.

It's working fine on my machine running Tiger. Your setup is a lot more powerful than mine, and mine handles a 5-raw-image-file panorama fairly snappy.
Photoshop 11 ("CS4"). Dual bootable, DP MDD 1.25GHz G4 (2004), maxed out at 2GB of RAM, both Spotlight and Dashboard disabled, Photoshop primary scratch disk on dedicated 160GB internal drive, at least 100GB available on each of the four internal drives, up to 300GB on some. Counting external FW drives just over 1TB of drive space available. nVidia GeForce 7800 GS 425MHz 256 MB graphics display card. Processor napping enabled through CHUD 3.5.2.

Aperture 2 Rendering underwater sunburst wrong - Canon G10, .cr2 RAW format

I've noticed that when Apple's Aperture 2 displays my underwater Canon G10 RAW pictures of sunbursts - picture of the sun taken from underwater - they are rendered wrong with a dark ring around the burst and are really blown out.
See link to photos of what I mean:
http://www.scubaboard.com/forums/canon-corner/308952-aperture-2-1-4-w-canon-g10- raw-sunburst-render-wrong.html#post4794371
Both photos use default settings, the "aperture214_g10RAW.jpg" was exported using Aperture 2.1.4 while the "photoshopCS4_g10RAW.jpg" was exported with Adobe Photoshop CS4.
Anyone have problems with this? Is there a setting I need to change to get it right?
Thanks!
jason

Thanks for the help.
Below is a link to my website where you can download the .cr2 file. I zipped it up. Please let me know what you find out. I also tried converting the file to .dng with Adobe's converter and still get the same look with the Apple interpreter.
In Aperture I tried tweaking the RAW, white balance, highlights, recovery, hue boost..etc but can not reproduce what it looks like in the Photoshop render.
Let me know what you can do. File is 13mb.
http://www.jasonjue.com/public/canonRaw.zip
Regards,
Jason

Macbook won't read card from Canon G10 in USB port

I can't copy Canon G10 RAW files from an SD card via a USB card reader onto an aluminum MacBook. I tried using Adobe Lightroom (the way I usually do this on another machine) to import the files but it couldn't recognize them. I tried to copy the files into a folder on the Desktop but I got a insufficient priveleges message. It seemed to copy the file names but tnot the files. When I tried to remove the card I got a "File is in use and can't be removed" message.
The card reader and the card work fine on a 24"Intel iMac.
Another USB card works fine in the card reader on the MacBook, too.
I'm puzzled.

Some added info, i CAN boot the bricked machine into Safe mode, but at reboot I get stuck in the same cycle again.
Oh, and in SafeBoot, the Macbook still tells me that no Airport card is installed, even though I know it does (and it's not knocked loose or anything).....

Canon G10 thumbnails don't work??

Hi -
I have CS4 and have installed the latest update but the thumbnails for Canon G10 raw files do not display (ACR will open and convert them properly). All other raw files (nikon) do display thumbs.
Any one have a tip for troubleshooting this?
thanks,
Tom O'Connell

Have you purged the cache for the offending folder(s) through the Bridge Tools menu?
Also check the ACR forum. I seem to remember that some type(s) of files from certain Canon files are not supported (not considered true or conforming raw files)
Adobe Camera Raw Forum [CLICK HERE]
What exact version of Bridge and the OS are you running?

Adobe photoshop elements 11 won't read my canon T5 raw CR2 files.

adobe photoshop elements 11 won't read my canon T5 raw CR2 files.
why?
need help!
Solved!
Go to Solution.

Hi Zach.
Sorry to say but Elements 12 came out several months before your camera. Adobe stops updating camera raw files for old software editions so that people have to buy new versions of the software when they get a new camera. It happened to me with LR3 when I got a new camera.
There are works rounds but they are a lot of extra steps and I think you would be converting the files to Some format other than RAW (tiff?) and which I am not sure will perform the same.
I think you just need to get a newer version of Elements.
Scott
Canon 6D, Canon T3i, EF 70-200mm L f/2.8 IS mk2; EF 24-105 f/4 L; EF-S 17-55mm f/2.8 IS; EF 85mm f/1.8; Sigma 35mm f/1.4 "Art"; EF 1.4x extender mk. 3; 3x Phottix Mitros+ speedlites
Why do so many people say "fer-tographer"? Do they take "fertographs"?

Can't open Canon 70D raw files with elements 12

Can anyone advise me why elements 12 will not open my Canon 70D raw files? When I have tried to update elements it tells me that there are no updates available. The Adobe Photoshop Camera Raw plugin is version 8.0.0.137

The Canon 70D was first supported in Camera Raw 8.2.
Camera Raw plug-in | Supported cameras
EOS 70D
CS2
8.2
5.2
Camera Raw 8.5 should be available for Elements 12 via Help > Updates
Photoshop elements 12 and camera raw 8.5
If you have windows XP, Vista or Mac OS X 10.6.8 you won't get the camera raw 8.5 update, because it doesn't work on those operating systems.
In that case you should be able to update to Camera Raw 8.3

Why can't i open raw files from my eos canon 7dii on PS elements 12

Why can't i open raw files from me eos canon 7dii on PS elements 12

Because your camera is newer than your software.
You need ACR 8.7 which was released this week, to open CR2 files from the 7D.2. Only current Adobe products can use this version, which would be PSE13 and the Photoshop versions CS6, CC & 2014 and some Adobe video products.
You can also use the free DNG Converter 8.7 to create DNGs of a folder of images at a time, and then open those DNGs in an older PSE version, but you’ll never be able to open the native CR2 files unless you update the host software to the current versions.
The DNG Converter 8.7 is available from the Adobe Updates page:
http://www.adobe.com/downloads/updates

Some Canon CR2 RAW Files Will Not Open In Elements 8

I use a Canon 7D DSLR. Up until 30 minutes ago I never had a problem opening Canon CR2 RAW files in Photoshop Elements 8.
Some files still open others do not. I can think of only one thing. I was shooting a large number of frames and reduced the RAW Image size down from RAW Large Only to RAW Medium with Small Jpeg to give me more room on the Compact Flash Card.
The Large RAW only CR2 files open fine in PSE 8, the Jpegs open fine, but the smaller sized CR2 files will not open and I get a wrong file type message in PSE8.
Any ideas why this would happen? I suspect it is a function of the camera setting, but all RAW files download as CR2 files.
I appreciate any guidance in this matter. Needless to say I am resetting my camera back to Large RAW files only.
Alex

ACR 5.x only supported full-sized 7D RAWs, but ACR 6.x supports 7D mRAW and sRAW, so just update to the latest version of the plugin, following the PSE-specific instructions:
http://www.adobe.com/downloads/updates/
sRAW and mRAW files are not RAWs because the camera has already demosaicked them to RGB and encoded them as lossless JPG.
Here is technical information on the reduce-sized RAWs:
http://lclevy.free.fr/cr2/#sraw

Adjusting canon G10 raw in elements 8

Similar Messages

Maybe you are looking for