Admin Console errors in fresh install on Windows 2003 Enterprise.

I have attempted to install 6.1 SP4 on two different Windows 2003 Enterprise boxes. Neither has W2K3 SP1 on them. The installs proceed using a typical install with no errors reported. All defaults were accepted during the install. I can start the server for the Admin and web server instances. I can hit the default page on the web server instance. When I attempt to launch the admin console, I am prompted to logon, as expected. I enter my credentials and promptly get an HTTP 500 error. I check the logs in C:\Sun\WebServer6.1\https-admserv\logs\errors and find the following line:
[26/Apr/2005:12:43:26] failure ( 2596): for host 192.168.175.128 trying to GET /https-admserv/bin/index, cgi_scan_headers reports: HTTP4044: the CGI program C:\Sun\WebServer6.1\bin\https\admin\bin\index.exe did not produce a valid header (program terminated without a valid CGI header. Check for core dump or other abnormal termination)
I searched for others reporting similar problems and the closest I could come to an answer was to make sure cookies were enabled on the brower (they are). I get the same error in IE and Firefox, both locally and remotely. After becoming frustrated with one W2K3 server, I decided to try on another. Exactly the same errors.
Increased loglevels in the server.xml provide no additional logging for this problem. Any pointers to a resolution would be most appreciated as I'm about ready to scrap Sun and move to Apache.
Thanks,
Sean

Yes, there appear to be problems where certain old versions of Netscape and iPlanet products can leave old DLLs lingering in the Windows system32 directory.
I'd check for the following files in the Windows system32 directory (typically C:\WINNT\system32 or C\WINDOWS\system32):
libnspr4.dll
libplc4.dll
libplds4.dll
nss3.dll
nssckbi.dll
smime3.dll
ssl3.dll
nsldap32v50.dll
nsldappr32v50.dll
nsldapssl32v50.dll
If you find any of these files, you can try replacing them with a copy from your Web Server install. Don't forget to backup first.
Please report back what you find!

Similar Messages

  • Admin console with CU4 not working on Windows 8.1

    I cannot get the admin console with CU4 to work on Windows 8.1. 
    I don't get any errors when I install it. But after installation I cannot connect to any site.

    Hi,
    Please try the solution in the blog below.
    1. In Configuration Manager Console click "Connect via Windows PowerShell"
    2. Type A for "Always run"
    Solve ps-drive problem with SCCM2012 sp1 powershell script
    Note:
    Microsoft provides third-party contact information to help you find technical support. This contact information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.
    Best Regards,
    Joyce
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

  • Console log on fresh install

    Hi, Just wondering about the following...
    Did a fresh install of snow leopard from the retail disk onto a brand new hdd.  Booted up, applied the latest 10.6.8 combo update.  Booted and shut down a couple of times to let it settle down and then checked the console log.  Under the circumstances I would have expected to see nothing.  I don't have a problem, just wondered why it is not clean as a whistle, so to speak.
    15/08/2012 17:46:40
    com.apple.launchd[1]
    *** launchd[1] has started up. ***
    15/08/2012 17:46:48
    com.apple.launchd.peruser.501[115]
    (com.apple.ReportCrash) Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
    15/08/2012 17:46:50
    com.apple.configd[13]
    label length 97 > 63
    15/08/2012 17:46:53
    com.apple.launchd.peruser.501[115]
    (com.apple.Kerberos.renew.plist[144]) Exited with exit code: 1

    I have the same read outs in console after a fresh install. The trouble on my end is when I want to install some programs, I get errors pointing to this peruser.501 and exiting with exit code:1 ... It also says permission denied, which is strange since I am the only user on the system and an admin. I read tons of text on the net regarding this issue but none were directly linked to my specific problem. I tryed to manually give permissions to the installer package in question via chmod command in terminall. Well dont know much about terminall comands but remember enough from DOS to know how to get around in terminall. But mostly I have been using commands that I read about on other sites. So please anyone have any idea whats going on? I have tryed installing without the system update. Later fresh install again! - with system update and still the same error.. Oh on the first install I already changed the cd player with the second hard disk I have in my notebook and I couldnt install the downloaded xcode 3.? in now way - I tried different versions but none of them got through install. Wasnt checking the console at the time yet. But on the second install I remembered to install xcode from the cd and it installed normally. But I suspect this permission issue is the coulprit - anyone had a similar experience?

  • Error while Installing R12.1.1 on Windows 2003 Enterprise Edition

    Dear All,
    I am installing R12.1.1 on Windows 2003 Enterprise Edition Server. I am using the media source that i have downloaded from Oracle Edelivery. I have done a MD5Sum check on the dowloaded files based the MD5SUM Check details given in site. (Not after staging).
    I have the stage files in the same partition as the partition in which the OS & Oracle is being installed (Free space is 300GB after staging)
    When the Installation reaches 53%, the installation fails with the following Error: "RW-50004: Error code received when running external process. Check log file for details. Running APPL_TOP Install Driver for VIS Instance"
    Log File:
    =====================
    e:\oracle\VIS\inst\apps\VIS_r12\logs\03021433.log
    ================================
    Processing Step 3 of 5
    Executing: e:\oracle\VIS\inst\apps\VIS_r12\temp\adrunias.cmd
    D:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>REM Perform the registration for tech stack
    D:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>echo Statusstring Registering Applications Technology Stack
    Statusstring Registering Applications Technology Stack
    D:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>(echo APPS & echo APPS ) | D:\StageR12\startCD\Disk1\rapidwiz\jre\NT\1.6.0\bin\java -mx512M -classpath .;D:\StageR12\startCD\Disk1\rapidwiz\jlib\java;D:\StageR12\startCD\Disk1\rapidwiz\jlib\xmlparserv2.jar;D:\StageR12\startCD\Disk1\rapidwiz\jlib\ojdbc14.jar;D:\StageR12\startCD\Disk1\rapidwiz\jlib\oui\OraInstaller.jar;D:\StageR12\startCD\Disk1\rapidwiz\jlib\oui\ewt3.jar;D:\StageR12\startCD\Disk1\rapidwiz\jlib\oui\share.jar;D:\StageR12\startCD\Disk1\rapidwiz\jlib\oui\srvm.jar oracle.apps.ad.clone.ApplyAppsTechStack -e e:\oracle\VIS\inst\apps\VIS_r12\appl\admin\VIS_r12.xml -stage D:\StageR12\startCD\Disk1\rapidwiz -showProgress -phase reg -nopromptmsg
    Log file located at e:\oracle\VIS\inst\apps\VIS_r12\admin\log\ApplyAppsTechStack_03021625.log
    **** truncated *************
    - 3% completed
    \ 3% completed RC-50004: Fatal: Error occurred in ApplyAppsTechStack:
    RC-50013: Fatal: Failed to instantiate driver e:\oracle\VIS\apps\tech_st\10.1.3\appsutil\driver\regclone.drv
    D:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>if 1 == 0 goto :REG_OK
    D:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>echo Cannot execute registration of Applications Techstack
    Cannot execute registration of Applications Techstack
    D:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>if "" == "TRUE" goto :INSIAS_OK RW-50010: Error: - script has returned an error: 1
    RW-50004: Error code received when running external process. Check log file for details.
    Running APPL_TOP Install Driver for VIS instance
    ApplyAppsTechStack_03021625.log
    =========================
    Started ApplyAppsTechStack at Wed Mar 02 16:25:21 IST 2011
    Version:
         ApplyAppsTechStack.java     :      120.23
    Executing home registration for s_weboh_oh...
    Registering using Registration Driver
    e:\oracle\VIS\apps\tech_st\10.1.3\appsutil\driver\regclone.drv
    instantiate file:
    source : e:\oracle\VIS\apps\tech_st\10.1.3\appsutil\template\adouiweboh.pl
    dest : e:\oracle\VIS\apps\tech_st\10.1.3\appsutil\clone\ouicli.pl
    backup : e:\oracle\VIS\apps\tech_st\10.1.3\appsutil\clone\ouicli.pl to e:\oracle\VIS\inst\apps\VIS_r12\out\ouicli.pl
    setting permissions: 700
    instantiate file:
    source : e:\oracle\VIS\apps\tech_st\10.1.3\appsutil\template\txkstubcfg1013.pl
    dest : e:\oracle\VIS\apps\tech_st\10.1.3\appsutil\clone\txkstubcfg1013.pl
    backup : e:\oracle\VIS\apps\tech_st\10.1.3\appsutil\clone\txkstubcfg1013.pl to e:\oracle\VIS\inst\apps\VIS_r12\out\txkstubcfg1013.pl
    setting permissions: 700
    instantiate file:
    source : e:\oracle\VIS\apps\tech_st\10.1.3\appsutil\template\apachectl_sh_1013_oh.tmp
    dest : e:\oracle\VIS\apps\tech_st\10.1.3\Apache\Apache\bin\apachectl
    backup : e:\oracle\VIS\apps\tech_st\10.1.3\Apache\Apache\bin\apachectl to e:\oracle\VIS\inst\apps\VIS_r12\out\apachectl
    setting permissions: 700
    Executing script in InstantiateFile:
    e:\oracle\VIS\apps\tech_st\10.1.3\perl\5.8.3\bin\MSWin32-x86-multi-thread\perl.exe -I e:\oracle\VIS\apps\tech_st\10.1.3\perl\5.8.3\lib\MSWin32-x86-multi-thread -I e:\oracle\VIS\apps\tech_st\10.1.3\perl\5.8.3\lib -I e:\oracle\VIS\apps\tech_st\10.1.3\perl\site\5.8.3\lib\MSWin32-x86-multi-thread -I e:\oracle\VIS\apps\tech_st\10.1.3\perl\site\5.8.3\lib -I e:\oracle\VIS\apps\apps_st\appl\au\12.0.0\perl -I e:\oracle\VIS\apps\tech_st\10.1.3\Apache\Apache\mod_perl\site\5.8.3\lib\MSWin32-x86-multi-thread e:\oracle\VIS\apps\tech_st\10.1.3\appsutil\clone\ouicli.pl
    script returned:
    Timed out( 3750000 ): Interrupted Exception
    Beginning OUI CLI cloning for s_weboh_ohWed Mar 2 16:25:24 2011
    e:\oracle\VIS\apps\tech_st\10.1.3\appsutil\jdk\jre\bin\java.exe -classpath D:\StageR12\startCD\Disk1\rapidwiz\jlib\java;e:\oracle\VIS\apps\tech_st\10.1.3\oui\jlib\OraInstaller.jar;D:\StageR12\startCD\Disk1\rapidwiz\jlib\xmlparserv2.jar;D:\StageR12\startCD\Disk1\rapidwiz\jlib\ojdbc14.jar oracle.apps.ad.clone.util.OracleHomeCloner -OUICLI -e e:\oracle\VIS\inst\apps\VIS_r12\appl\admin\VIS_r12.xml -nolink -oaVar s_weboh_oh -homestub weboh -log e:\oracle\VIS\inst\apps\VIS_r12\admin\log\ohclone.log
    running OUI CLI home cloning:
    e:\oracle\VIS\apps\tech_st\10.1.3\oui\bin\setup.exe -nowait -clone -silent -force -nolink -waitForCompletion session:ORACLE_HOME=e:\oracle\VIS\apps\tech_st\10.1.3 oracle.as.j2ee.top:s_asInstanceName=VIS_r12_WEBOH oracle.as.j2ee.top:s_adminName=oc4jadmin oracle.as.j2ee.top:s_adminPassword=welcome ORACLE_HOME_NAME=VIS_r12_WEBOH -J-Doracle.installer.noLink=true
    Executing script in InstantiateFile:
    e:\oracle\VIS\apps\tech_st\10.1.3\perl\5.8.3\bin\MSWin32-x86-multi-thread\perl.exe -I e:\oracle\VIS\apps\tech_st\10.1.3\perl\5.8.3\lib\MSWin32-x86-multi-thread -I e:\oracle\VIS\apps\tech_st\10.1.3\perl\5.8.3\lib -I e:\oracle\VIS\apps\tech_st\10.1.3\perl\site\5.8.3\lib\MSWin32-x86-multi-thread -I e:\oracle\VIS\apps\tech_st\10.1.3\perl\site\5.8.3\lib -I e:\oracle\VIS\apps\apps_st\appl\au\12.0.0\perl -I e:\oracle\VIS\apps\tech_st\10.1.3\Apache\Apache\mod_perl\site\5.8.3\lib\MSWin32-x86-multi-thread e:\oracle\VIS\apps\tech_st\10.1.3\appsutil\clone\txkstubcfg1013.pl
    script returned:
    .end std out.
    .end err out.
    instantiate file:
    source : e:\oracle\VIS\apps\tech_st\10.1.3\appsutil\template\adouiweboh.pl
    dest : e:\oracle\VIS\apps\tech_st\10.1.3\appsutil\clone\ouicli.pl
    backup : e:\oracle\VIS\apps\tech_st\10.1.3\appsutil\clone\ouicli.pl to e:\oracle\VIS\inst\apps\VIS_r12\out\ouicli0.pl
    setting permissions: 700
    instantiate file:
    source : e:\oracle\VIS\apps\tech_st\10.1.3\appsutil\template\txkstubcfg1013.pl
    dest : e:\oracle\VIS\apps\tech_st\10.1.3\appsutil\clone\txkstubcfg1013.pl
    backup : e:\oracle\VIS\apps\tech_st\10.1.3\appsutil\clone\txkstubcfg1013.pl to e:\oracle\VIS\inst\apps\VIS_r12\out\txkstubcfg10130.pl
    setting permissions: 700
    instantiate file:
    source : e:\oracle\VIS\apps\tech_st\10.1.3\appsutil\template\apachectl_sh_1013_oh.tmp
    dest : e:\oracle\VIS\apps\tech_st\10.1.3\Apache\Apache\bin\apachectl
    backup : e:\oracle\VIS\apps\tech_st\10.1.3\Apache\Apache\bin\apachectl to e:\oracle\VIS\inst\apps\VIS_r12\out\apachectl0
    setting permissions: 700
    e:\oracle\VIS\inst\apps\VIS_r12\admin\log\adcvmlog.xml does not exist. Ignore it
    [AutoConfig Error Report]
    The following report lists errors AutoConfig encountered during each
    phase of its execution. Errors are grouped by directory and phase.
    The report format is:
    <filename> <phase> <return code where appropriate>
    [APPLY PHASE]
    AutoConfig could not successfully execute the following scripts:
    Directory: e:\oracle\VIS\apps\tech_st\10.1.3\perl\5.8.3\bin\MSWin32-x86-multi-thread\perl.exe -I e:\oracle\VIS\apps\tech_st\10.1.3\perl\5.8.3\lib\MSWin32-x86-multi-thread -I e:\oracle\VIS\apps\tech_st\10.1.3\perl\5.8.3\lib -I e:\oracle\VIS\apps\tech_st\10.1.3\perl\site\5.8.3\lib\MSWin32-x86-multi-thread -I e:\oracle\VIS\apps\tech_st\10.1.3\perl\site\5.8.3\lib -I e:\oracle\VIS\apps\apps_st\appl\au\12.0.0\perl -I e:\oracle\VIS\apps\tech_st\10.1.3\Apache\Apache\mod_perl\site\5.8.3\lib\MSWin32-x86-multi-thread e:\oracle\VIS\apps\tech_st\10.1.3\appsutil\clone
    ouicli.pl INSTE8_APPLY -1
    AutoConfig is exiting with status 1
    RC-50013: Fatal: Instantiate driver did not complete successfully.
    e:\oracle\VIS\apps\tech_st\10.1.3\appsutil\driver\regclone.drv
    I have gone through the meta link document [989752.1]. But I feel that document does not apply to me as i am not running the installation from a network storage area.
    Pl. help me.
    Thanks and regards,
    Adm.

    AN Update:
    The Oracle Universal Installer shows the following in the screen before the error appears:
    Starting Oracle Universal Installer...
    No pre-requisite checks found in oraparam.ini, no system pre-requisite checks w
    ill be executed.
    Preparing to launch Oracle Universal Installer from D:\DOCUME~1\ADMINI~1\LOCALS
    ~1\Temp\OraInstall2011-03-02_04-25-26PM. Please wait ... Oracle Universal Instal
    ler, Version 10.1.0.6.0 Production
    Copyright (C) 1999, 2007, Oracle. All rights reserved.
    ...............................................................Val: 0
    Val: 0
    Val: 0
    Val: 2
    Val: 0
    Val: 0
    Val: 0
    Val: 2
    Val: 0
    Val: 0
    Val: 0
    Val: 0
    Val: 0
    Val: 0
    Val: 2
    Val: 0
    Val: 0
    Val: 0
    Val: 0
    Val: 2
    Val: 0
    Val: 0
    path: D:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\OraInstall2011-03-02_04-25-26PM\jre\bin
    ;.;D:\WINDOWS\system32;D:\WINDOWS;D:\StageR12\startCD\Disk1\rapidwiz\unzip\NT;D:
    \MVS\VC\bin;D:\cygwin\bin;D:\WINDOWS\system32;D:\WINDOWS;D:\WINDOWS\System32\Wbe
    m
    toload is D:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\OraInstall2011-03-02_04-25-26PM\Win
    dowsGPortQueries.dll
    100% Done.
    Copying files in progress (Wed Mar 02 16:25:59 IST 2011)
    .................................................Val: 0
    . 79% Done.
    Copy successful
    Setup in progress (Wed Mar 02 16:26:05 IST 2011)
    .....Oracle JAAS [Wed Mar 02 16:26:28 IST 2011]: exception: 9
    opmnctl: opmn started
    Please help me.
    Thanks and regards,
    Adm

  • Fresh Install of Windows 8.1 on rMBP mid 2012

    Seeing how there are issues about bootcamp and windows 8.1, anyone know if a fresh install of Windows 8.1 (non-pro) will work on a rMBP mid 2012 model using the usual bootcamp instructions? Or will I have to do a workaround to get it installed?

    That is what I fear. I've heard issues about installing windows 8.1 directly (though most seem to be about the 2013 MBPs, unsure of my model), and considering it's impossible for me to get a copy of windows 8 and upgrade through the store (the optimal solution) now, I'm left with installing 8.1 right from the get-go. Anyone else have success/experience going through the 8.1 route on 2012 MBPs?

  • Error When Finish the Install on Windows 2003

    When finish the install on Windows 2003 Server the last check list Oracle Audit Vault Asistant send error:
    avca.bat initialize_av -crtscma N -avsysdba ${s_avsysdba} -avadm ${s_avadm} ${s_avauditor} -dvowner ${s_dvownerarg} ${s_dvacctmgr} -jdbc_str jdbc:oracle:oci:@av -dbalias av -sid av -avconsoleport 5700
    dont run command.
    which i can do. thanks for the help

    Hi, Pankaj,
    i encountered same problem as you did.
    please could you elaborate how you resolve the problem "by passing oracle_sid at cmmond prompt and then starting the database, before that check listner is running or not , if not start listner"
    many thanks,
    lee

  • Did a fresh install of Windows Vista and Premiere CS5 and now Premiere is buggy!

    Hi everyone. I was using Premiere Pro CS5 on my quad core system editing AVCHD clips just fine and then I had to do a fresh install of Windows Vista Home Premium. I then did a fresh install of Premiere Pro CS5 on a separate hard drive and opened up one of my AVCHD projects. Now, for some reason, the same AVCHD projects that played fine before are now jittery and also show blocky artifacts. The jitter seems to be a constant jitter every second and the blocky artifacts seem to happen mostly when the subject in the clip is moving. I know the problem isn't in the original clip from my GH-1 camera because if I play the original clip that is on my hard drive, it plays just fine so, it has to be Premiere CS5 that is causing the clips to play all jerky on the timeline. Can someone please help me solve this problem? One more thing, when I reinstalled Premiere CS5, I installed the latest update from Adobe. I didn't have that update installed before when the clips played fine. Could that update be the culprit? Thanks.
    My clips were recorded using a Panasonic GH1 HDSLR camera and are 1080/24p (progressive).
    Karizma

    As far as I know, you thought wrong
    My 3 hard drives are configured as...
    1 - 320G WD Win7 and all programs
    2 - 320G WD Win7 swap file and PPro projects
    3 - 1T WD all video files... read and write

  • "canon mp navigator ex has stopped working" cannot get this to work - fresh install on windows 8.1

    Trying to get LiDE 110 scanner working on my laptop. I keep getting this message once scan is complete "canon mp navigator ex has stopped working" and then a corrupted pdf is saved - fresh install on windows 8.1 I have used most up to date drivers and software and tried these two "fixes" from an internet search on this topic (it seems to be a common problem that hasn't been addressed by Canon) - I'm on the verge of returning the scanner!! 1) Delete this file: C:\Users\<user name>\App Data\Roaming\Microsoft\Windows\Network Shortcuts\My Web Sites on MSN.      RESULT - "My Web Sites on MSN" does not exist in that folder on my computer. 2)Remove "sdc330Twain.ds" from windows Twain-32 folder      RESULT - didn't have any effect Thank you, in anticipation!

    Currently running the scanner on "Advanced scan to pdf" but would like to have access to the canon software with more options 

  • No Audio from Internal Speakers after a fresh install of Windows 7 Pro

    T400S - after a fresh install of Windows 7,  theres no audio from the Internal speakers. When I plug an external speakers there's audio. I also install the  audio drivers from the Lenovo site.  Thanks 

    Does your sound bar in the Sound Windows go up and down when you play music?
    Regards,
    Jin Li
    May this year, be the year of 'DO'!
    I am a volunteer, and not a paid staff of Lenovo or Microsoft

  • FRESH install of Windows 7 Home Premuim on a new G550

    I just got a new G550 with Windows 7 Home Premium yesterday that I like so far (less than 24 hours)
    I am probably not the first to think this, but if I wanted to do a FRESH install of Windows 7 Premium (it came on the Laptop) I dont like all the junk Lenovo puts on there though. I removed a lot of it and did an image of it once i got it where I liked it just in case. (Along with a repair disk)
    Obviously it does not come with a straight Windows 7 disc. BUT.... If I had a copy of the same OS and tried to install it with a reformatted hard drive using the key that is on the bottom of the laptop, would that work?
    I don't see the need for One touch restore/recovery with the native imaging software. I would like to clean up the drive, get rid of the hidden partition and go from scratch. Tell me I am missing something here.
    Lastly, I can't find anywhere on Lenovos support pages where I can find ANY Windows 7 drivers I might need. Am I stuck?
    Thanks,
    Doug

    UPDATE:  I gave up on tech support at Lenovo and called the sales department.  They were helpful as my computer is under warranty.  They are kicking it up to the next level and are supposed to call back today with further options that may include replacement.  Time will tell.
    Microsoft support says it is a Lenovo problem not a Windows problem, six hours total spent with micosoft,   I have contacted the broadband card manufacture and received a little help.  There are known issues according to D-Link with the router configuration.  These have been correced. 
    Will update with further information tommorow.  Another call scheduled with the senior engineering staff at Microsoft to attempt to correct the issue.

  • Can't clone or fresh install of Windows 8.1 on my MX100

    Hello, I am trying to replace my hard drive with the MX100 on a Lenovo Flex 2-14.  I first tried cloning with Acronis.  The cloning of the SSD worked but it would not boot.  Second, I deleted all the partitions and formatted to NTFS.  I tried to do a fresh install of Windows 8.1  from a USB thumb drive.  Change the boot order to the USB then to the MX100.  It would boot to the USB but then it would just hang there with the Windows 8 icon. I made a test where I place the SSD back with the old hard drive and try to do a fresh install and it booted to the USB but it didn't hang there.  It actually took me to the Windows install menu.  So there's nothing wrong with the USB. It's is not like my computer cannot detect the SSD because when I put it in my laptop, I can see it in the BIOS menu and I can format it in Windows. Please if anyone have similar problem...please help. Cheers,Kham

    kaneda101 wrote:
    Hello, I am trying to replace my hard drive with the MX100 on a Lenovo Flex 2-14.  I first tried cloning with Acronis.  The cloning of the SSD worked but it would not boot.  Second, I deleted all the partitions and formatted to NTFS.  I tried to do a fresh install of Windows 8.1  from a USB thumb drive.  Change the boot order to the USB then to the MX100.  It would boot to the USB but then it would just hang there with the Windows 8 icon. I made a test where I place the SSD back with the old hard drive and try to do a fresh install and it booted to the USB but it didn't hang there.  It actually took me to the Windows install menu.  So there's nothing wrong with the USB. It's is not like my computer cannot detect the SSD because when I put it in my laptop, I can see it in the BIOS menu and I can format it in Windows. Please if anyone have similar problem...please help. Cheers,KhamI have the same problem, this SSD will not work with my Lenovo Flex 2 14" 

  • Support package / add on import error in DB2 V9.1 / windows 2003 system

    Hi
    I have installed ERP 6.0 IDES version in Windows 2003 server with DB2 LUW 9.1 / FP5.
    I have selected "Row Compression" and "Deferred Table Creation" during installation.
    Now when I am importing add on BI Content 7.03, I am getting error during Movename tabs phase.
    Error in phase: IMPORT_PROPER
    Reason for error: TP_STEP_FAILURE
    Return code: 0008
    Error message: OCS Package ALL, tp step "6", return code 0008
    The error message in the file D:\usr\sap\trans\log\P090113.IDS is as follows,
    2 ETP301
    3 ETP361 "96" Shadow-Nametabs activated, DDL executed
    2 ETP362 "6" Shadow-Nametab activations failed
    2 ETP360 Begin: Act. of Shadow-Nametabs with DDL ("2009/01/13 02:57:51")
    2 ETP363 End : Act. of Shadow-Nametabs with DDL ("2009/01/13 02:58:07")
    2 ETP301
    1 ETP172 MOVE OF NAMETABS
    1 ETP110 end date and time : "20090113025807"
    1 ETP111 exit code : "8"
    1 ETP199 ######################################
    I have read some notes it may be due to "Row compression" and "Deffered table creation" option in DB2. Please help me in resolving this issue if it is DB2 related.
    Regards,
    Nallasivam.D

    Hi,
    Please find the real error message which I found in the same log file. This is a new installation.
    System configuration details:
    ERP 6.0 IDES SR3 + Windows 2003 enterprise server SP2 + DB2 V9.1 / FP5
    BASIS and ABAP support pack level: (700) 13.
    Error message:
    3 ETP399 INDEX IN "IDS#BTABI"
    3 ETP399 LONG IN "IDS#BTABD COMPRESS YES"
    3 ETP399 
    2WETP000 02:53:26: Retcode 1: error in DDL statement for "/OSP/T_REPINFO                " - repeat
    2EETP345 02:53:38: Retcode 1: SQL-error "-107-SQL0107N  The name "IDS#BTABD COMPRESS YES" is too lo
    2EETP345 ng.  The maximum length is "18".  SQLSTATE=42622" in DDL statement for "/OSP/T_REPINFO   
    2EETP345             "
    2 ETP399  -
    DB-ROLLBACK() -
    3 ETP399 INDEX IN "IDS#POOLI"
    3 ETP399 LONG IN "IDS#POOLD COMPRESS YES"
    3 ETP399 
    2WETP000 02:54:05: Retcode 1: error in DDL statement for "/SAPPO/CMP_ASG                " - repeat
    2EETP345 02:54:17: Retcode 1: SQL-error "-107-SQL0107N  The name "IDS#POOLD COMPRESS YES" is too lo
    2EETP345 ng.  The maximum length is "18".  SQLSTATE=42622" in DDL statement for "/SAPPO/CMP_ASG   
    2EETP345             "
    2 ETP399  -
    DB-ROLLBACK() -
    2EETP334 02:54:17: error in DDL, nametab for "/SAPPO/CMP_ASG" not activated
    3 ETP399 IN "IDS#POOLD"
    3 ETP399 INDEX IN "IDS#POOLI"
    3 ETP399 LONG IN "IDS#POOLD COMPRESS YES"
    3 ETP399 
    2WETP000 02:54:17: Retcode 1: error in DDL statement for "/SAPPO/CSCRN_HDR              " - repeat
    2EETP345 02:54:29: Retcode 1: SQL-error "-107-SQL0107N  The name "IDS#POOLD COMPRESS YES" is too lo
    2EETP345 ng.  The maximum length is "18".  SQLSTATE=42622" in DDL statement for "/SAPPO/CSCRN_HDR 
    2EETP345             "
    2 ETP399  -
    DB-ROLLBACK() -
    2EETP334 02:54:29: error in DDL, nametab for "/SAPPO/CSCRN_HDR" not activated
    3 ETP399 INDEX IN "IDS#POOLI"
    3 ETP399 LONG IN "IDS#POOLD COMPRESS YES"
    3 ETP399 
    2WETP000 02:54:29: Retcode 1: error in DDL statement for "/SAPPO/F_ASG                  " - repeat
    2EETP345 02:54:41: Retcode 1: SQL-error "-107-SQL0107N  The name "IDS#POOLD COMPRESS YES" is too lo
    2EETP345 ng.  The maximum length is "18".  SQLSTATE=42622" in DDL statement for "/SAPPO/F_ASG     
    2EETP345             "
    2 ETP399  -
    DB-ROLLBACK() -
    2EETP334 02:54:41: error in DDL, nametab for "/SAPPO/F_ASG" not activated
    Regards,
    Nallasivam.D

  • Can oracle discoverer 10 be installed on Windows 2003 server

    Hi,
    I have couple of queries related to Oracle Discoverer. Need help urgently.
    1. Can Oracle Discoverer 4.1 version support Windows 2003 on which Citrix server version 4 or above is installed? If yes, please let me know the patch details to download the same.
    2. Can Oracle 10g BI Tool, Oracle Discoverer Administrator and Desktop be installed on Windows 2003 Server Operating System on which Citrix server version 4 or above be installed?
    Thanks in advance.
    Regards,
    Rajesh Gurram

    Hi,
    1. Discoverer 4.1 has been desupported but was only certified for Windows 200 and XP
    2. Discoverer Desktop and Admin is support on Windows 2003:
    2003 SP1+ 10g (10.1.2.0.2 )
    One thing I have to mentioned is that Oracle does not support any Citrix client operations.
    If ever you encounter a problem you will need to reproduce the problem
    outside of the Citrix environment to prove that it is not the cause of the problem.
    Regards
    Roelie Viviers

  • Sun X4150 Can not install Microsoft Window 2003 Standard 32-bit OS

    I have try to install Microsoft Window 2003 Standard 32-bit OS in X4150,but put the OS Media and the output show below error messages
    "The system is not a supported platform"
    I check the sun system handbook and releated document for this X4150 product,it have been certificated.
    I try to install with Window 2003 Standard 64-bit OS,it work ok.The Window 2003 Enterprise 32/64 bit,it work ok also.
    Have change the CPU Speed (lower),Update the BIOS,ELOM,the same situration.
    Have anyone have this experience with the installation of window 2003 Standard 32-bit.
    Tks for your help.

    Hi,
    Have you tried installing using the Sun Installation Assistant disc, for more info see the Sun Installation Assistant for Windows and Linux User's Guide:
    http://docs.sun.com/app/docs/coll/x4150

  • Netweaver 7.0 SR3 install - x64 - Windows 2003(64-bit)/MS SQL 2005

    I want to install Netweaver 7.0 SR3 on 64-Bit Windows 2003 Enterprise server with a SQL 2005 backend.
    I downloaded packages 51033323_1, 51033323_2 & 51033323_3 and started the sapinst.exe utility in the 51033323_1\IM_WINDOWS_I386 directory.
    I get the following error message: "You started an installation of software for platform I386, but SAPinst is running on platform AMD64."
    I obviously have the 32-bit content but I require the 64bit install. How do I locate the 64-bit installation content.
    Should I first install with the 32-bit install and then update the components to 64-bit? Or is there a standalone 64-bit installer and content?
    Thanks

    Use below DVD's to install the Netweaver 7.0 SR3
    51033493_1: - NW 7.0 SR3 Installation Export 1 of 2
    51033493_2: - NW 7.0 SR3 Installation Export 2 of 2
    51033508_15: - NW 7.0 SR3 UC-Kernel 7.00 Windows Server on x64 64bit
    51033511_13: - BS2005 SR3 Installation Master Windows Server on x64 64bit
    Thanks
    Shambo

Maybe you are looking for

  • Java2SDk 1.4.2.06 installation problem on Windows Server 2003

    I tried the installation of Java2SDk 1.4.2.06. ,I tried this, but it fails to complete and NO directory folder is created so I cannot continue with the proccess. The OS is Windows Server 2003. I have done the following procedures: Enabled/Disabled th

  • 11.5.10.2 -12.1.1 Upgrade- American English patch driver taking long time

    Hi, I have performed test upgrade from 11.5.10.2 to 12.1.1.It was successful. The American English Upgrade patch driver had taken 20 hours time to complete. Now i am doing a second test run by following the same steps, but now the same patch is takin

  • NI-488.2 Comctr, HP53181A. Only the *IDN? command works. MEAS:FREQ? hangs

    HP53181A will not respond to any other command except *IDN? Any other command that returns data does not respond. I'm using the NI-488.2 Measurement and Automation explorer to enter the commands. Anyone know what I'm doing wrong? Thanks

  • Importing from PE4

    I am not able to import pictures saved in Photoshop Elements 4.0 to iPhoto. Here's what I am doing, can anyone tell me what I am doing wrong? 1. Transfer from my camera (Fuji S5100), save in \Pictures\iPhoto Library\Data\2006\2006 - 09 2. Edit with P

  • PKI CA CLUSTER CRL PUBLICATION FAILURE

    After configuring PKI cluster , I am not able to publish CRL, i am seeing the error below when i try to publish CRL Event log error Event ID 74 Active Directory Certificate Services could not publish a Base CRL for key 1 to the following location on