Administration of Oracle HTTP Server in Application Server 10.1.3.1

Hi
Can anyone tell me how to administer the Oracle HTTP Server from the Application Server Control not directly from the configuration files in Oracle Application Server 10.1.3.1.
I have followed the instructions given but the link for the HTTP Server is not activated and can't be clicked in the System Components table in Oracle Application Server Control page.
In the instructions given by the Oracle HTTP Server Admin guide was mentioned an user : ias_admin. But I haven't found it. All the users listed are oc4jadmin and something like JRAadmin.
Can anyone tell me how to proceed to make possible HTTP Server Administration, Configuration and Mainteinance directly from the Application Server Control in Enterprise Manager.
Best regards
Drini

Hi
First of all, I am using the application server right now. I have deployed there a Java Web Service.
In the directory that you specified it wasn't something like setupinfo.tx but readme.txt the contents of which I am pasting below
////////Readme.txt////////////////
The installation of Oracle Application Server 10g 10.1.3.1.0 was successful.
These instructions are located in D:\product\10.1.3.1\OracleAS_1\install\readme.txt for your future reference.
You can view the status of the server with the following command:
D:\product\10.1.3.1\OracleAS_1\opmn\bin\opmnctl status
Access the Welcome Page with the following URL:
http://server:8888/
Access the Oracle Enterprise Manager 10g Application Server Control via the following URL:
http://server:8888/em
Installation Details:
Installation Directory: D:\product\10.1.3.1\OracleAS_1
Installation Type: J2EE Server and Web Server
Installed Components: Oracle HTTP Server, Oracle Containers for J2EE (OC4J), and Oracle Process Manager & Notification Server (OPMN)
Instance Name: as10gamf2.server
Administrator Username: oc4jadmin
The log file containing the details of Configuration Asistants is located in D:\product\10.1.3.1\OracleAS_1\cfgtoollogs
\\\\ End of Readme.txt \\\\\\\\\\\
i have tried before the opmnctl status command and it says that the HTTP_Server and the OC4JGroup are alive. Only ASG is down. This is by default in all iAS installations I have done.
Best Regards
Drini

Similar Messages

Connection of oracle database in database server from application server

Hi,
I have two servers, one is application server and another one is database server…..
I want to connect oracle 10g database in database server to application server. In application server oracle 10g client is installed……In database server, I have set tnsnames.ora, Listener.ora …while checking in lsnrctl…the particular sid is running fine…
In application server, while I give as sqlplus
After giving username and password its showing error as
ORA-12545: Connect failed because target host or object does not exist
While surfing in net it shows check tnsnames.ora and listener.ora….. I have set the environmental variables here in application server…..
It’s connecting when I give
Sqlplus
Sql>username/password @ hostname: 1521/sid_name
Is it possible to connect with the username and password
I have set the host names in /etc/hosts….
If we are giving the hostname, port number and Sid name this connects without using tnsnames.ora…..
While pinging between two servers the connectivity is there between two servers…..
Could u pls help me out?
Thanks in advance

hi,
as u said i have done that ..s.till the same problem persists...
lsnrctl>services
$ lsnrctl
LSNRCTL for IBM/AIX RISC System/6000: Version 10.2.0.1.0 - Production on 08-FEB-2007 03:56:23
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Welcome to LSNRCTL, type "help" for information.
LSNRCTL> services
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
Services Summary...
Service "RBTT" has 1 instance(s).
Instance "RBTT", status READY, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0 state:ready
LOCAL SERVER
Service "RBTTXDB" has 1 instance(s).
Instance "RBTT", status READY, has 1 handler(s) for this service...
Handler(s):
"D000" established:0 refused:0 current:0 max:1022 state:ready
DISPATCHER <machine: emea, pid: 197076>
(ADDRESS=(PROTOCOL=tcp)(HOST=emea)(PORT=37484))
Service "RBTT_XPT" has 1 instance(s).
Instance "RBTT", status READY, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0 state:ready
LOCAL SERVER

Get files from Content server to Application server

I want to Get few files from Content server to Application server, I have the required Archive ID. It is a HTTP Content server type. Can you please suggest the suitable method for this.
Thanks
Purna

> I am new to SDN and SAP XI, can anyone tell me whether its possible to move the files (different strcuture files i.e. some are master data files and some are transaction data file) from FTP server to Application server with one interface.
Hello Bob,
Yes it is possible.
There can be two ways of doing it.
1. N:1 mapping, BPM will require for this.
N:1 Mapping refer this blog
IDOCs (Multiple Types) Collection in BPM
BpmPatterns CollectMerge
part1 BPM with Patterns explained Part-1
part2 BPM with Patterns explained Part-2
Second option
Create 3 scanarios in integration directory and correspondingly in integration repositoy create different data types, message types, mappings & interface mappings and then in each of scenario us different message interface and interface mapping.
> I know that if we create new configuration it will work but I question is does master data interface picks this transaction data file also.
>
If you are using N:1 scenario then use *.csv in your sender adapter under file name parameter and then all the files will be picked up from same directory.
If you are using second option (3 different scenarios) then also you can pick the different files from same directory. You will be having 3 sender adapters in this case, So, one for picking master data, and another for product data and the last one for transaction data.
So, in case of master data use "plant_*.csv" as a file name and directory name.
In case of product data, use "product_*.csv " as a file name and source directory will remain same.
similarly do it for transaction data.
So by this way all 3 sender adapters will perform their job to pick the different files from same source directory.
Regards,
Sarvesh

Diff between Transaction Server Vs Application server

Hi,
What is the difference between Transaction Server Vs Application server..?
Cheers,
Raj
Helpful answers are always rewarded

Hope these two will help you
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/4bc4e290-0201-0010-eba9-dc6a507d3220
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/9318c990-0201-0010-1b8e-e3cfae0a1939
Regards,
PP

Differences between Web server and Application server

Differences between Web server and Application server:
We use Tomcat web server or sun Application server to deploy web applications . What is the differeences between these two servers?

http://en.wikipedia.org/wiki/Web_server
http://en.wikipedia.org/wiki/Application_server

Regaring file from FTP server to application server

Hi frnds,
Below is my code where i am transferring Presentation server file to FTP server.
Now i want to transfer that file from FTP server to application server.
any help. below i am providing my code.
<code>
*& Report demo
report z_demo_ftp.
Variables declaration
data : mi_handle type i,
       pwd       type char30,
       slen      type i,
       key type i value 26101957,
       it_file2 type filetable,
       w_file2 like   line of it_file2,
       l_rc type i,
       v_index type i,
       v_file(30) type c,
       v_path(100) type c,
       v_path_tmp(100) type c.
*Internal table declaration
data: begin of mtab_data occurs 0,
       line(132) type c,
      end of mtab_data.
Selection scree parameters
parameters: p_file type string default 'C:\'.
Get the file path
at selection-screen on value-request for p_file.
data: p_file1 type string.
p_file1 = p_file.
call method cl_gui_frontend_services=>file_open_dialog
    exporting
      default_filename        = p_file1
    changing
      file_table              = it_file2
      rc                      = l_rc
    exceptions
      file_open_dialog_failed = 1
      cntl_error              = 2
      error_no_gui            = 3
      not_supported_by_gui    = 4.
if sy-subrc <> 0.
    message id sy-msgid type sy-msgty number sy-msgno
            with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
else.
    read table it_file2 into w_file2 index 1.
    p_file = w_file2-filename.
    clear w_file2.
    refresh it_file2.
    split p_file at '\' into table it_file2.
    describe table it_file2 lines v_index.
    read table it_file2 into w_file2 index v_index.
    concatenate 'put' w_file2-filename into v_file separated by space.
    delete it_file2 index v_index.
    clear w_file2.
    loop at it_file2 into w_file2.
    if sy-tabix = 1.
    v_path = w_file2-filename.
    endif.
    if sy-tabix ge 2.
    concatenate v_path '\' w_file2 into v_path.
    endif.
    endloop.
    concatenate 'lcd' v_path into v_path_tmp separated by space.
endif.
Start of selection
start-of-selection.
pwd = 'file456'.
slen = strlen( pwd ).
call function 'HTTP_SCRAMBLE'
exporting
    source      = pwd
    sourcelen   = slen
    key         = key
importing
    destination = pwd.
Connect to FTP
call function 'FTP_CONNECT'
exporting
    user            = 'client'
    password        = pwd
    host            = 'saturn'
    rfc_destination = 'SAPFTP'
importing
    handle          = mi_handle
exceptions
    not_connected   = 1
    others          = 2.
if sy-subrc = 0.
Excute FTP command
call function 'FTP_COMMAND'
    exporting
      handle        = mi_handle
      command       = 'cd staff
    tables
      data          = mtab_data
    exceptions
      tcpip_error   = 1
      command_error = 2
      data_error    = 3
      others        = 4.
Excute FTP command
      call function 'FTP_COMMAND'
    exporting
      handle        = mi_handle
      command       = v_path_tmp
    tables
      data          = mtab_data
    exceptions
      tcpip_error   = 1
      command_error = 2
      data_error    = 3
      others        = 4.
Excute FTP command
call function 'FTP_COMMAND'
    exporting
      handle        = mi_handle
      command       = v_file
    tables
      data          = mtab_data
    exceptions
      tcpip_error   = 1
      command_error = 2
      data_error    = 3
      others        = 4.
if sy-subrc = 0.
    loop at mtab_data.
      write: / mtab_data.
    endloop.
endif.
endif.
*FTP disconnect
call function 'FTP_DISCONNECT'
exporting
    handle = mi_handle
exceptions
    others = 1.call function 'FTP_DISCONNECT'
exporting
    handle = mi_handle
exceptions
    others = 1.
      end-of-selection.
</code>
so what more code shuld i write.
regards,
kamal

Hi Che Eky ,
                      Actually the above code is for putting the presentation server file to FTP Server.
But now i need to Put the same file present in the FTP server to Application server.
So any help or code which will be helpful.
regards,
kamal

Copy File from Presentation Server to Application Server in Background

Hi,
I need to copy Image file from Presentation Server to Application Server.
The below given code is workking fine in Foreground but whenevr I am trying to execute in Background, the job is cancelled and I am getting a dump.
data : wa_source      type string,
          wa_destination type string.
wa_source = 'C:\PARBIND.BMP'.
wa_destination = 'D:\PARBIND.BMP'.
start-of-selection.
call method cl_gui_frontend_services=>file_copy
    exporting
      source               = wa_source
      destination          = wa_destination
*    overwrite            = SPACE
* EXCEPTIONS
*    cntl_error           = 1
*    error_no_gui         = 2
*    wrong_parameter      = 3
*    disk_full            = 4
*    access_denied        = 5
*    file_not_found       = 6
*    destination_exists   = 7
*    unknown_error        = 8
*    path_not_found       = 9
*    disk_write_protect   = 10
*    drive_not_ready      = 11
*    not_supported_by_gui = 12
*    others               = 13
if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
In backgound Error is....
Exception condition "CNTL_ERROR" raised.*
Any solution is appreciated.
Thanks
Arbind

Hi Arbind,
Just realize... when you run it in foreground, you have a foreground to capture the file location. so it runs fine..
but when you are running it in background, there is no foreground to check that is no gui present... how can it check where the C:\.... location is??
no need of reading any oss note... just see.. the name is cl_GUI_FRONTEND_service.. its only for front end..
u need open dataset, read dataset, close dataset kind of things while running in background. or RFCs to read the file... (search SDN).

Files from FTP server to Application server

Hi All,
I am new to SDN and SAP XI, can anyone tell me whether its possible to move the files (different strcuture files i.e. some are master data files and some are transaction data file) from FTP server to Application server with one interface. Actually the process is already established at clientsite for placing master data files like product, plant etc from FTP server to App server through FTP adapter. Now my requirement is to move transaction data file with completely different structure as master data to App server. If we place these trasaction data file in same folder/directory as master data files does SAP XI pick this file also. If not what are the steps I need to follow to achieve this. I know that if we create new configuration it will work but I question is does master data interface picks this transaction data file also.
Right now our process for master data files is SAP XI picks the files and deletes the file from FTP server folder. The master data file names are plant_attr.csv, product_attr.csv etc and transcation data file name is salestrasactiondata.csv. I need to move these files to application server on daily bases.
I appreciate your help .
Regards
Bob.

> I am new to SDN and SAP XI, can anyone tell me whether its possible to move the files (different strcuture files i.e. some are master data files and some are transaction data file) from FTP server to Application server with one interface.
Hello Bob,
Yes it is possible.
There can be two ways of doing it.
1. N:1 mapping, BPM will require for this.
N:1 Mapping refer this blog
IDOCs (Multiple Types) Collection in BPM
BpmPatterns CollectMerge
part1 BPM with Patterns explained Part-1
part2 BPM with Patterns explained Part-2
Second option
Create 3 scanarios in integration directory and correspondingly in integration repositoy create different data types, message types, mappings & interface mappings and then in each of scenario us different message interface and interface mapping.
> I know that if we create new configuration it will work but I question is does master data interface picks this transaction data file also.
>
If you are using N:1 scenario then use *.csv in your sender adapter under file name parameter and then all the files will be picked up from same directory.
If you are using second option (3 different scenarios) then also you can pick the different files from same directory. You will be having 3 sender adapters in this case, So, one for picking master data, and another for product data and the last one for transaction data.
So, in case of master data use "plant_*.csv" as a file name and directory name.
In case of product data, use "product_*.csv " as a file name and source directory will remain same.
similarly do it for transaction data.
So by this way all 3 sender adapters will perform their job to pick the different files from same source directory.
Regards,
Sarvesh

Function module for f4 help in presentaion server and application server.

hi guys,
I need to create a function module that will get the file or folder name by f4 help for the file in the presentation server or application server based on the location selected.
For this function module what are the minimum impot parametrs and export parameters required.
i have tried with 'f4_filename' for presentation server
and '/SAPDMC/LSM_F4_SERVER_FILE' for application server.
but i am not able to get this.
can any one help me in this regard ?
cheers,
kumar.

hi use like this ..
if p_presvr = 'X'.
*-- if the file is to be downloaded to presentation server
    call function '/SAPDMC/LSM_F4_FRONTEND_FILE'
      changing
        pathfile         = p_file
      exceptions
        canceled_by_user = 1
        system_error     = 2
        others           = 3.
    if sy-subrc <> 0.
      if sy-batch = 'X'.
        message id sy-msgid type 'S' number sy-msgno
                with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4 into v_msg.
        write / v_msg.
        clear v_msg.
        stop.
      else.
        message id sy-msgid type 'S' number sy-msgno
                  with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      endif.
    endif.
else.
*-- if the file is to be downloaded to application server
    call function '/SAPDMC/LSM_F4_SERVER_FILE'
      exporting
        directory        = '/'
        filemask         = '*'
      importing
        serverfile       = p_file
      exceptions
        canceled_by_user = 1
        others           = 2.
    if sy-subrc <> 0.
      if sy-batch = 'X'.
        message id sy-msgid type 'S' number sy-msgno
                with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4 into v_msg.
        write / v_msg.
        clear v_msg.
        stop.
      else.
        message id sy-msgid type 'S' number sy-msgno
                  with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      endif.
    endif.
endif.

How to connect message server with application server?

How to connect message server with application server?

Hello Damodar,
The connection is established at the time of installation only !!. At the time of installation you need to specify the Central Instance(message server in most cases unless you have a dedicated message-enque server).
Regards.
Ruchit.

Difference between web server and application server

Hi Everybody
Could anybody expain difference between web server and application server?
Sharad

Hi there
The difference I know is the application servers provides the containers for the applications to run which is not provided by the web servers.
For example the containers can be an EJB container or JSP container etc

Installing an Oracle Database client on Application Server

Hi all
I have posted before but thought I'd clean up my original question and repost - apologies but I'm desperate for help here.
I have a problem using Oracle Wallet with Application Server and Developer Suite 10g Rel 2 Software Update 10.1.2.3.0 on Windows 2003. The problem arises because the database which ships with this version of Application Server is 10.1.0.5. This database version is not compatible with Oracle Wallet external passwords eg sqlplus /@MY_WALLET_NAME.
So...to get around this I'm looking at putting the 10.2 database client on which will allow me to use sqlplus with the wallet.
My questions is:
Does anyone have any advice for retaining existing Application Server functionality (we use Discoverer, Forms and Reports (RWCLIENT)) with a new Oracle 10.2 home on the server?
I will put on the client so would expect if I copy across the tnsnames & sqlnet ora, the connectivity is all backward compatible. SQL*Plus is obviously backward compatible. I'm not familiar with Application Server so am looking for guidance on any configurations I might need to change to make sure they pick up the right Oracle Home. For example, with the new Oracle Home at the start of the %PATH%, will RWCLIENT work as normal?
Thanks,
Tom
Edited by: R_Norvegicus on Sep 27, 2010 3:19 AM
Edited by: R_Norvegicus on Sep 27, 2010 3:36 AM

Nothing special. Oracle Client installation is very simple.
Client Installation Guide for 32-Bit Windows Contents / Search / Index / PDF
http://download-east.oracle.com/docs/pdf/A95494_01.pdf
Joel Pérez

Pls help!Can Oracle v7 support WebSphere Application Server instead of Oracle 8i

Hi,
I am using WebSphere as my application server and NT4.0 as OS.
I wish to connect to Oracle db which is located at another server.
Currently what I have is Oracle Client Software v7.3.4. There is error when I want to start the service.
So I suspect that it is not compatible and it might require Oracle 8i in web environmt and to support WebSphere Application Server as well.
Can anybody help me? Thank you.

Hello,
I guess you could get that to work as somebody was able to use WebLogic as webserver: http://christopherbeck.wordpress.com/2008/09/15/weblogic-server-and-apex/
Alternatively you could use the Embedded PLSQL Gateway if you don't want to install Apache (depending database version you are on).
Regards,
Dimitri
http://dgielis.blogspot.com/
http://www.apex-evangelists.com/
http://www.apexblogs.info/

Creating a connection pool using Oracle 10g, Sun ONE Application Serve 8.1

Has any one succesfully configured Oracle 10g to work with Sun ONE Application Server 8.1 on Windows 2000 server service pack 4? I am embarking on a new J2EE project and I need to configure it as soon as possible.

I haven't done it myself on that particular service pack, but I don't see why it should be any different than configuring a connection pool on other vanilla win2k/other OSes.
Would you please try and let this forum know?
thanks.

Performance questions in Oracle Forms/Reports of Application Server 10g

Hello.
I have a dual Xeon 2.6 computer with 3 GB of memory and 6 GB of cache, running RedHat EL 3 with Oracle AS 10g (9.0.4.0.0).
Application Server is used to run some applications created with forms, and it generates several reports, but the forms are also used as a front end to another Oracle Database (Oracle 7.0, runing in Sun Solaris 5.6).
I've notested (and also my users) the application is getting very slow (is running in a dual Xeon, with 2 Gbit nics, in a 3 Gb backbone).
The speed (or lack of it) is most noted when the forms are generating the reports (it used to be fast - 2 seconds) and now it can take up to 5 minutes.
The AS 10g, when generating the reports, almost all of the querys go to the other server (in Solaris) and the results return to the server, and then the report is generated. The network has no problems (at least, that i know of), and the network performance is not an issue - both the servers are connected to a Gbit switch.
Can someone may have an ideia of it can be?
even in the clients, when running the forms application, the transition of the several menus is slow, and it used to be more fast.
the 10g is using Java Jinitiator 1.3.18. Can it be from that ? i'm not certain, but i could say this things start happen when we upgraded the jinitiator from 1.3.13 to 1.3.18...
My users are really getting on my nervers and i cant do nothing, because they have reason...
any help would be appreciated !
Cheers
Bruno Santos

Bruno, did you solve the performance problem? I'm experiencing the same lack of speed.

Administration of Oracle HTTP Server in Application Server 10.1.3.1

Similar Messages

Maybe you are looking for