Administrators only access PDP

Hi All,
In Project Online or Project Server 2013, is there a way to have a PDP page available to all workflow stages but editable / visible to Administrators only?
Thanks!!
GeorgeTU

George,
There are a few 'work-arounds'. You could try one of these approaches. Make sure you try them in a test environment and confirm they suit your need.
http://epmadvice.blogspot.com/2014/03/make-pdp-read-only-for-certain-users-or.html
http://azlav.umtblog.com/2011/05/04/making-a-read-only-pdp-with-infopath-forms/
Cheers,
Prasanna Adavi, Project MVP
Blog:
  Podcast:
   Twitter:   
LinkedIn:
  

Similar Messages

  • HT4314 i have 2 game center account with 1 apple id  but it will only access one account. it says the other id is used but i cant change . help.

    I have a game center account that has 2 accounts in the same apple id. the problem is i can only access one account. when i try to type in for the second account it says already taken. How do i change to the 2nd account with the same apple id? Please help.

    that's the issue, you bought the OS online so Donald is right, it is being mailed to you. post the URL where you bought it.
    the 'app store' is an application running on OSX itself where you can DL software.
    so, you have to wait for mountain lion to arrive.
    if you want to get a clean OS on your machine now, do this
    reboot holding down command/option/R (hoping your machine supports this)
    open disk utility, erase your HD so you have a single mac journaled partition
    choose install OSX on this HD
    let it run. from what you said, you will be back on lion.

  • Can only access emails through OWA after migration from exchange 2007 to 2013

    can only access emails through OWA after migration from exchange 2007 to 2013, in other words unable to access mails through outlook or from other Applications services.
    needed RCA ... plz help..

    Hi,
    From your description, you can send and receive messages only when you use OWA after migration from Exchange 2007 to Exchange 2013. If I have misunderstood your concern, please let me know.
    In your case, I recommend you create a new test mailbox in your Exchange 2013 and check if you can send and receive messages on Outlook. If yes, it is recommended to create a new profile to solve this issue.
    Hope this can be helpful to you.
    Best regards,
    Amy Wang
    TechNet Community Support

  • I have two apple accounts, but can only access one. I did all the steps to recover the older account's password but nothing worked. I need to access the older account to update apps. Also would there be a way to just combine both accounts?

    I have two apple accounts, but can only access one. I did all the steps to recover the older account's password but nothing worked. I need to access the older account to update apps. Also would there be a way to just combine both accounts?

    Were you able to reset the account's password ? If not then how did you try to get it reset e.g. http://iforgot.apple.com (which would have sent it to the rescue email address if you have one on that account) ? You can also try contacting iTunes Support in your country to get it reset : http://support.apple.com/kb/HT5699
    And no, accounts can't be merged nor content transferred between accounts.

  • On imac 10.6.8 using current version of Aperture.  How can I access the Aperture Library  on my external hard drive that I use with time machine for backup?  I can only access the application but not the library..

    On imac 10.6.8 using current version of Aperture.  How can I access the Aperture Library  on my external hard drive that I use with time machine for backup?  I can only access the application but not the library..

    Go into Time Machine (the program not the bundle on the extrnal disk) and using Time Machine's browser go to the Folder where the library lives. You could look in the library bundle in Time Machine but that won't really tell you much,
    If you want to make sure it truely has backed up your library you will need to restore it and open the restored library with Aperture.
    If all this still has you confused you need to read up on Time Machine in order to get a feel for how it works, for what it is doing and for how to restore files from it.

  • I can access my time capsule from my mac mini at work but my macbook can only access it from my home network. how do i fix this?

    I have a Mac Mini and a MacBook, both were configured at home to access the time capsule. I have since moved the mini to work to use there and it has no issues looking up files on the time capsule which remains at home. The macbook whoever can only access the time capsule from within the home network. I can't seem to find what I may have done differently. Can anybody help?
    Not sure if your allowed to post two questions, but it's may be related. I find that accessing the files on the time capsule from the mac mini or the macbook is very slow. Accessing the same files from an older HP laptop is as fast as accessing its own hard drive. How can I speed up the accessing of these files from my apple products. One would think they would work fast and the 'windows' computers would take minutes to map the drive each time... 
    Thanks for any help.

    I have since moved the mini to work to use there and it has no issues looking up files on the time capsule which remains at home.
    This cannot happen by magic though.. you must have configured the mini to access the TC remotely.. which method are you using, BTMM and iCloud??
    The macbook whoever can only access the time capsule from within the home network. I can't seem to find what I may have done differently. Can anybody help?
    How is the Macbook configured to access the TC remotely?? If you are trying to use BTMM and iCloud, then it might be a case that with the mini running the connection cannot be done by more than one computer at a time.. this is generally the case although I do not know if that is specifically true of BTMM method. Try turning off the mini and leave it off.. (off not standby)... then reboot the TC when you are at home.. and then try and connect the laptop to the TC the next morning from work. See if it is then able to capture the connection.. if so start up the mini and I suspect it now will not be able to connect.. that will prove that the TC cannot cope with two remote connections.
    There also could be another factor in here. If you are accessing the laptop via the same router as the mini is on.. then actually you cannot have two users mount the same files on a TC.. from the same IP address.. as far as the TC is concerned both devices have identical IP, that is the public IP of the work location router.
    If you happen to not be using BTMM then the situation is even easier.. you cannot make two different devices connect to the same network resource using the same port. That is the failing of the NAT system.. one device uses the port then it cannot be used by a second device. You will need to do some fancy footwork and use a different port.
    Anyhow tell us exactly how you are doing remote access.. otherwise I am just guessing.
    Not sure if your allowed to post two questions, but it's may be related. I find that accessing the files on the time capsule from the mac mini or the macbook is very slow.
    Are you talking about files you are hosting on the TC?? Not Time Machine backups??
    Can you tell me exactly how you are accessing the TC.. please do a test..
    Copy a file to the TC and from the TC using the Laptop.. Use a single very large file, eg 1GB movie file.
    Give me a read and write speed.. you can use activity monitor to give me an aprox average speed as well as peak.
    Do the same test from the same computer with wireless turned off running ethernet.
    Then do the tests from the mini.. same ones.. copy large file to and from the TC by ethernet and by wireless.. when using ethernet make sure wireless is off.
    I strongly recommend you set IPv6 to link local only for your wireless and ethernet setup in the Mac.
    eg
    Now do the test from the HP laptop and give me the results from that.
    Is the issue wireless only.. ??
    Then you might need to spend a bit of time fixing the wireless in the Macs.. you can run wireless diagnostics in Mavericks.
    About Wireless Diagnostics

  • I have 2 game centers on 1 Apple ID and it willl only access 1 of them may someone tell me how to access the other one

    I have 2 game centers on 1 Apple ID and it will only access 1 of them may someone tell me how to access the other one

    You don't have to use the same ID for iCloud as you do for purchasing.  You can just set up iCloud using your other ID. 
    If your have already have another account, you have to go to Settings>iCloud, tap Delete Account, choose Keep on My iDevice when prompted, set up your new account with the other ID, turn on your iCloud data syncing and when prompted, choose Merge to upload your data to the new account.

  • I saved photos from my Macbook Pro onto my Iphone (using itunes, 4 years ago). My macbook is now dead and I need to get the photos I saved off of my iphone 3GS transferred to a pc.  Any help...  From my PC I can only access "internal storage"

    I saved photos from my Macbook Pro onto my Iphone (using itunes, 4 years ago). My macbook is now dead and I need to get the photos I saved off of my iphone 3GS transferred to a pc.  Any help...  From my PC I can only access "internal storage"

    The iphone is not a storage/backup device.  The picture sycn is one way - computer to iphone.  The photos are also reduced in size when synced to iphone so they are not of the original quality
    It has always been very basic to always maintain a backup of your computer.
    Have you failed to do this?
    If so, not good at all, you can e-mail the pics to yourself - keep in mind they will never be of the original quality

  • Read Only Access to Storage Container

    Is it possible to give Read Only access to a particular storage container without adding someone to Subscription and providing them the access key without anonymous request without going through SAS route

    By default, a container and any blobs within it may be accessed only by the owner of the storage account. If you want to give anonymous users read permissions to a container and its blobs, you can set the container permissions to allow public access. Anonymous
    users can read blobs within a publicly accessible container without authenticating the request.
    This link gives full details
    https://msdn.microsoft.com/en-us/library/azure/dd179354.aspx
    Frank

  • Read Only access to UCCX server

      Hi,
    I would like to know if it was possible to create an account for Read Only access for server in UCCX 8.02.
    Saima

    Saima,
    Unfortunately no it is not, you have either Admin access or supervisor access. The admin access has full access and supervisor access allows configuration of the RM subsystem either foe own team or all teams.
    HTH,
    Chris

  • Read-Only Access to Specific SAP tables

    Is it possible to grant a user read-only access to a specific table or tables?
    For example, say I wanted to give someone SE16N capability for just EKKO/EKPO/EKBE and NO OTHER tables.  Is this possible?  How?
    Thanks.

    Hi,
    as it was mentioned the transaction SE16N checks for authorization object S_TABU_DIS. The problem in your case is that the tables EKKO, EKPO and EKBE are already assigned to the authorization group MA - MM Appl. table. But there are many more tables assigned to this group. Changing assignment of standard tables is not a good idea.
    Cheers

  • Read Only access to tablespace

    Hi,
    Oracle 10.2.0.4
    How can I grant read only access to a tablespace for a user.
    Thanks

    It is no ussual.... a tablespace is a box where one or more user store his data... sure you do not want to say user and not tablespace?
    Grant select to the objects of this tablespace...DBA_TABLES or ALL_TABLES...
    Select 'GRANT SELECT ON ' || OWNER || '.' || TABLE_NAME || ' TO <USERNAME> ' FROM DBA_TABLES WHERE TABLESPACE_NAME = <TABLESPACE>

  • Read only access to J2EE related tools

    Hello,
    I would like to help our auditors access everything they need to check in the Java systems, but I am not ready to give them ADMIN accounts. That`s why I need some kind of read only access for them.
    So I would like to ask you if there is a SAP Note about the read only access roles for J2EE/ Java AS?
    I am afraid there is no such note available, so can anybody share any experience with granting read only access to the Java system? I know how to grant access to the whole NWA, but what about the rest?
    Examples:
    - is there a way how to grant read only access only to the UME?
    - is there a role for read only access to the portal PCD?
    - is there something similar for KM access?
    Or has anybody ever tried to split the admin roles into smaller pieces? Is there a description/ document how to do such thing?
    Thank you for your time and effort,
    cheers Otto

    Hi,
    thanks for trying, but I can use help.sap.com and was on that page before.
    Maybe if there were any examples there or better: if the whole thing would be more granular (I see no point in using roles starting with SUPER, containing ADMIN or ending with ALL). I am looking for roles for surgery or for auditing. I don`t want to give anybody these super/admin/all roles just like that.
    If you can suggest how to use that page, that would be cool. Otherwise I see no use.
    By the way: another question of mine about surgery: How to restrict access to download/ upload UME configuration file
    I would like to know how to controla access to this specific feature, nothing else.
    Thanks for the time and effort,
    cheers Otto

  • View read allows read only access

    Hi friends,
        I have created maintainance view, I am getting this warning " View read allows read only access , Maintainance not possible". So to avoid this, what should i do now.
    Thank you

    Hi,
    In Delivery and maintence check if the field Data Browser/Table View Maint. has the value delivery and maint allowed
    or delivery and maint allowed with restrictions.
    Regards,
    Rajesh Kumar

  • Read-only access when saving metadata to file from Adobe Lightroom on a MAC OS to Windows shared drive

    We have a group of 5 people editing and indexing photos to a shared drive on a windows server, everyone has its own catalog and working on different folders to avoid any locking conflicts.
    The windows computers don't have any problems but the Mac's don't write the updated metadata to all files because they get the message "Photos have read-only access".
    The environment is the following:
    2x Macs workstations running:
    - Adobe Photoshop Lightroom 5.7.1
    - iMAC with MAC OS X Yosemite 10.10.2
    3x Windows Workstations:
    - Windows 7
    - Adobe Photoshop Lightroom 5.7.1
    Server:
    - Shared drive on a Windows Server 2012 Standard
    I have searched the internet, no one has this problem with this exact setup but I have tried all the solutions I found, namely:
    1. Connect to the network drive with cifs:// protocol
    2. Change the settings of the nsmb.conf for 'smb1_only' protocol
    3. Mount the drive manually by command line
    Nothing worked, any ideas?

    Did you ever find a solution to this problem?  I have the same issue and wonder if Lightroom 6 will resolve it.  I  tried AFP, SMB2, SMB3 and they all failed to save metadata randomly. When I use NFS from OS X then it works fine but it's a little slower than SMB and it's not as native as the mount via AFP or SMB, so it's harder to maintain.     My server is a FreeNAS 9.2 (FreeBSD) which is running Samba, Netatalk and native NFS.

Maybe you are looking for

  • Error appear: get logical processor information (k...

    this is showing on the process of installation, can anyone help  , this is the error appear: failed to get proc address for get logical processor information (kernel.32.dll)

  • Anamorphic sequence with letterboxes

    Hi I have a sequence that was shot on an xl2 in 16:9, it was digitized in a 4:3 project and edited. I have a client who only has widescreen tv's. I made the sequence 16:9 anamorphic in my sequence settings. It still has letter boxes on it, I need to

  • ACE: Problem configuring probe snmp

    Hi, I have a problem when I configure probe snmp and My Server W2K3 dual core, snmp comunity public has an oid cpu .1.3.6.1.2.1.25.3.3.1.2, the output is: access-list anyone line 8 extended permit ip any any probe snmp was interval 4 faildetect 2 pas

  • DNS record ownership for DHCP clients

    my configuration: dhcp/dns/dc installed on same system - Windows 2008 R2 SP1 in domain environment. all zones configured to secure updates only with aging and scavenging enabled dhcp servers are member of DNSupdateproxy group. dhcp are configured wit

  • How to disable index defined on a stsndard table j_1ipart2?

    Dear Friends, I am using a stndard table j_1ipart2 for updating line items for GL account.I am using a hashed type internal table for this purpose.But There is already two indexes defined. and they are not useful to me.So I just want to disable these