Adobe 9 Pro PROBLEM with Word 2010

I upgradedd to Office 2010 Suite,  Purchased Adobe 9 Pro
and installed it after I installed Office 2010.  Adobe does not show in the
Word 2010 ribbon.  Called ADOBE they say they do not support ADOBE 9 and Office 2010.  HELP

We are a training institution using the latest Microsoft Office Pro (2010) and Creative Suite Design Premium (CS5) suites.
Pdfmaker has been a key part of the PDF Basics syllabus for some time and to have to wait till the end of 2011 for a solution (Creative Suite 6?) is a large inconvenience.
Given that Adobe are still selling Acrobat 9 as a “current” product as part of the suites, I believe that a free upgade to Acrobat 9.xx that has the functionallity restored should be in order, rather than being told that “ps and by the way … the product that you bought TODAY doesn’t work and possibly never will unless you upgrade”!
Spoke to Adobe customer support about this yesterday and their response was to downgrade to Office 2007 if pdfmaker is that important – a fairly arrogant approach.
This is an Adobe problem, not Microsoft, as they are the 3rd party providing the plug-in. (Adobe are quick to point this out when it comes to Photoshop plug-ins.)
As we advertise using the packaged suites upgrading an individual product outside of the automatic updates is not an option.

Similar Messages

  • Duplex printing problem in Word 2010 but NOT in Excel 2010

    At the risk of repeating an old question :
    I have  Windows 7 Pro, Office Professional 2010 and an HP Officejet Pro 8600 Plus and two sided printing is a problem in Word.
    Excel prints in Duplex by selecting "Print on both sides / Flip pages on short edge".
    Word, though, with the exact same Setting, fails and the document is printed one two sheets of paper ... one side only.  Seems rather bizarre.
    Help would be appreciated.
    Neil

    Hi,
    Which Word 2010 version do you use? Please try the Word 2010 14.0.4760.1000 version(We may upgrade or downgrade the version by install or uninstall the patches).
    Next, we may try the workarounds which provide by other communicators, I copied here:
    Workaround1:
    File then Print
    Go ahead and select manual print on both sides
    Go to page setup, print options, and the advanced tab. Go all the way down and select "Print on the front of the sheet for duplex printing."
    After printing the first set, I was able to just turn it 180 degrees and it worked just fine.
    Workaround2:
    As a work around I found if I ignore Words "Settings" and instead go into my printer properties, select the Finishing Tab, and select "Print on Both Sides (Manually)", the document will duplex print correctly.  Requires 5 steps instead of 3
    Quote From:
    http://social.technet.microsoft.com/Forums/office/en-US/b948525f-be7e-453c-9477-8a467852d360/duplex-problem-in-word-2010?forum=word
    Regards,
    George Zhao
    TechNet Community Support

  • Acrobat 9 is not working with Word 2010: why?

    I cannot get Acrobat 9 to make a PDF document from Word documents made with Word 2010, either by 'Creat from file' in Acrobat or by using Acrobat PDF Maker in Word. This has happened before when I first used Word 2001, but a later version of Acrobat solved that problem. Is the same sort of thing happening with Office 2010? If not, what can I do.

    print to the Adobe PDF printer if all else fails
    Thank you for that; it's nice to know that Acrobat will eventually work with Word 14, though not yet. I've tried printing with the Adobe PDF printer, and it doesn't use the proper fonts either, so I'd be better saving as a PDF document from Word. But perhaps I'll get better results with saving to PS first.
    Meanwhile, I'll treat Adobe's claim that with Acrobat 9 you can make PDF from any document with a large pinch of salt.

  • Problem with Word 2013 through VPN

    Hello,
    From several weeks my company has a problem
    with Word 2013 when laptop is connected to the network
    via VPN.
    Symptoms:
    - Word 2013 is opening very slow (even
    opening a blank card)
    - there are no matter if I try to open blank page or network files
    - All other Office 2013 components are working fine (Excel, Powerpoint etc).
    - When I disconnect from a VPN, Word is opening properly.
    It is not a problem with VPN because:
    - Word is opening locally (not network files)
    - before we had Word 2010 and it was working smoothly
    Does anyone know a similar case
    and could help solve this problem?
    Regards,
    Pawel

    Hi,
    "- before we had Word 2010 and it was working smoothly" -
    Word 2013 might deal with documents in different ways.
    Since Word will open properly when you disconnect from a VPN, you might want to start by analyzing the network traffic, VPN connections.
    Please try to check the option "Copy remotely stored files onto your computer and update the remote file when saving" in
    FILE>Options>Advanced>Save section, and then verify result.
    The other thing to check is add-ins. I'd suggest you to start Word in safe mode and see if issue persists:
    Press Win + R and type "winword /safe" in the blank box, then press Enter.
    Thanks,
    Ethan Hua CHN
    TechNet Community Support
    It's recommended to download and install
    Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
    programs.

  • How to Install Microsoft Word Add-in in Windows Svr 2008 R2 64bit with Word 2010 32 bit

    I developed Microsoft Word Add-In for 32 bit systems which is working fine. Now i want to install the same on Win Svr 2008 R2 Enterprise 64 bit with 32 bit Microsoft Word installed. What changes do i need to do in my project and installer.
    Desired Target: Win Svr 2008 R2 64 bit with Word 2010 32 bit
    Working/Development/Testing PC: Win 7 32 bit with Word 2010 32 bit
    Tried Steps
    Changed project and installer target to x64
    When i give target location in Application folder [ProgramFilesFolder][Manufacturer]\Office14\ADDINS\ the Add-In automatically installs in C:\ProgramFiles (x86)\Office14\ADDINS\ and registry is also updated as required but when word is started it tries to
    load Add-In in location C:\ProgramFiles\Office14\ADDINS\ whereas files are placed in x86 ProgramFiles because word too is 32 bit.
    note: Setup of server (Win08r2 64 bit with 2010 Word 32 bit) cannot be changed as it is running in production.
    please guide how do i solve the issue.

    I rebuilt the solution in .Net 3.5 and somehow it solved the problem on the clients.
    For second query As Microsoft Word 32 bit is installed on Win Server 08 r2 64Bit so i needed a target code for 32 bit which worked. 64 bit solution was not required as quoted by
    Eugene Astafiev
    earlier. Thanks for your support.

  • RoboHelp for Word installed from RoboHelp 10 won't work with Word 2010

    I have a Help project created in RoboHelp for Word 8.  I recently upgraded from Word 2007 to Word 2010 and discovered that RH8 for Word won't work with Word 2010.  So I purchased RoboHelp 10 and have installed RoboHelp for Word from it.  Alas, RH for Word STILL won't work with Word 2010.  When I try to open my project, I get this message:
    Before I bought RH10, I live-chatted with an Adobe sales person who assured me it was compatible with Word 2010.
    BTW, I tried to roll back to Word 2007, but I was getting weird behavior running Word, so I have reinstalled Word 2010 and want to stay there.
    Any ideas?

    I have just installed Rh10 for Word on a new machine and initially I got this message.
    I wonder if you have followed those instuctions? I changed the setting to Enable All.
    The other possibility is what do you have set for the default version? If it is 2007 and that no longer exists on your machine, then Rh will not be able to proceed. The dropdown should show 2010
    See www.grainge.org for RoboHelp and Authoring tips
    @petergrainge

  • RoboHelp 9/Acrobat X Pro Integration with Outlook 2010

    Is anyone aware of any issues with RoboHelp 9 and/or Acrobat X Pro integrating with Outlook 2010? When I create a PDF for review using RoboHelp and then try to send it for shared review, I keep getting an error message when I try to add people to the To and CC lists in the Send for Shared Review dialog. Clicking either button brings up my Address Book from Outlook, and I can select people without any problems, but whenever I click OK, I get a Check Names dialog book that says:
         Microsoft Outlook does not recognize"/O=Company Name", Select the address to use:
         (No Suggestions)
    At this point, all I can do is go back to the Address Book and try to add people again, but this leads to the same error.

    In Outlook, go to File/Options/Add-Ins, and select Manage Com Add-ins, and click Go...
    Then make sure the PDFMaker Office COM Addin is checked, select OK, restart, and it should be available.

  • Issue with Word 2010

    Hi Team,
    We are facing issue with Word 2010.
    User has created a document in Word 2007 and they inserted a symbol °C in Times New Roman and Areal.
    Please find below the text which has issue.
    干燥温度：60℃
    温度：95℃，
    In the document, instead of ℃ it is showing blocks, when we open it in MS Word  2010. (Eg: 60℃, 95℃).
     We have tried the following.
    1.       If we select the square and click on any other font, it will change to °C with formatted font Cambria Math. We can have it by selecting any font.
    2.       I have tried to copy the line and paste it to excel/WordPad/notepad
    •  Excel(2010) : It is displayed properly(°C) but the font was Times New Roman and Arial as the word document has Times New Roman and Arial respectively.
    •  Notepad: It is displayed properly(°C) but the font was Lucida Console
    •  WordPad: The symbol is not displayed correctly (Squares and vertical lines). It is having the same issue as we have with word document.
    3.       I just selected the whole text and had Ctrl+space , then all the corrupted characters turned to original one (°C with formatted font Cambria Math) : we can use this as a work around.
    4.       I have created a word document and I typed °C in that document with fonts Times New Roman ,Arial, SimSun and STKaiti and saved the document. When I opened the document I was able to see °C properly.
    Kindly help.
    Regards,
    Sooraj

    Hi Sooraj:
    For checking the encoding of your documents, please follow below steps:
    Rename your documents from xxxx.docx to xxxx.zip
    The zip folder will contains basically folders: rels, docProps, word and one [Content_Types].xml
    Browse to word, open document.xml file,
    <?xml version="1.0" encoding="UTF-8" standalone="true"?>,
    the first line will suggest the encoding type of the document.
    Except checking the encoding difference, could you please do one more thing that is copying the font like
    “Times New Roman” from a computer which display the symbol correctly to the computer which has issue, and please let me know the results, thank you.

  • Adobe Send - Problem with uploading files. When is this going to get fixed?

    When is the Adobe Send problem with uploading files going to get fixed. Similar to others - I have tried and tried to make Adobe Send work and get an error. I have tried to upload the file and it looks like it uploads and then - it is nowhere to be found.
    I then go to Adobe Send Now and it works fine.

    The problem is the same as described in other similar threads.
    I have a 57 MB PowerPoint file I am trying to send using Adobe Send. I go through the normal steps to identify the file and select recipients and then send the file. After the file completes the upload - an error saying there was a problem comes up and the file is not uploaded.
    I have tried to upload the file to the site with similar results - error and the file doesn't go.
    I can go to the old SendNow site and it works flawlessly.
    If I need to get screenshots - let me know. There are several other threads describing this same problem. It isn't something new or not heard of before.
    Sent from my iPod

  • TS4532 Any idea on the timing of the software update to fix the IOS6.1 problems with Exchange 2010?

    Any idea on the timing of the SW update to fix the IOS 6.1 problem with Exchange 2010?
    victor

    In reply to Macca7275
    We moved from Blackberry to iPhone for 120 services in 2010.  We have just renewed the iPhone fleet.  Security was the issue for the business that employs me (lawyers).  When comparing the two, Blackberry performed without issue most of the time but we experienced a number of issues with the trackballs on individual phones. This was, however, the first of the Blackberry Bold models.  The expense behind the scenes was one of the major factors for the move. It was cheaper to run Exchange and iPhones than Blackberry services. Our lawyers on the whole adopted the iPhones and a number have become quite proficient at using them. We ensured that we had a means to securely wipe and lock business phones. We chose Mobile Iron for this purpose but you will find other products to do the same job. Cost is probably going to be the deciding factor here.  Our only negative factor was butterfingers resulting in smashed glass with the iPhones although I have had one user drown several phones.

  • Acrobat 11 Pro - problem with right-click "Convert to Adobe PDF" output folder

    I'm migrating from one machine running Windows XP Pro with Acrobat 8 Pro to Windows 7 Pro with Acrobat 11 Pro.
    On the XP machine, when I right-click on a document and select "convert to Adobe PDF" the process works just fine - it always outputs the file to the target destination I have set in the Adobe PDF printer definition.
    On the Windows 7 Pro/Acrobat 11 Pro machine, the exact same settings are ignored: the PDF will always end up in the same folder as the source file.
    Both the source folder and the destination folder are on one of my office's networked drives.
    Under the Printing Preferences, I have the output folder address set the same on both machines, so it *should* go to the right location on the new machine.
    Oddly enough, on the Acrobat 11 Pro machine, if I select Adobe PDF as the default printer and do a test print, it *does* print to the correct folder!
    This has got me stumped!
    Thoughts?
    (update from later in the day)
    If Adobe PDF is selected as the default printer, I *can* select a bunch of documents, right-click, select "print", and Word will open up, and they'll print to the correct target folder.
    So, it's "just" the right-click "Convert to Adobe PDF" that doesn't work correctly.

    The reinstall is typically the last ditch effort to do. The first step is Help>Repair and Help>Updates. As far as Office 2013, the PDF Maker of AA X is not compatible and you can only print. In your list of errors it showed a problem with AcroTray.exe. As a first step, go to the print and select print-to-file. The file will be a PS file (maybe with a PRN extension). Once the printer if finished, open the file in Distiller to complete the process. If that is successful, then the problem is with AcroTray. Check your running tasks to be sure AcroTray is indeed running. If not, that is likely the problem. If it is, then restart it (it is located in the Acrobat folder). AcroTray provides the interface between the PS creation and Distiller to automate the process of creating the PDF.

  • Acrobat XI Pro and MS Word 2010 file conversion issues

    I have created a photo journal comprised primarily of photo collages and text boxes using Microsoft Word 2010.  Acrobat XI Pro is installed as well.  When I "Save as Adobe PDF" the resulting PDF is missing many - not all - of the text boxes placed on top of the photos, and the some of the photos themselves are "reordered" - the one placed on top moves to the back.  What might be causing this?
    If I select "Save As" and then select the "PDF" option from Word's dropdown menu, the resulting PDF - which is much smaller than the one created by the "Save the Adobe PDF" option - retains all the data in the Word file, in the correct order.
    Note - this did not happen when I was using Acrobat X Pro.  And this  file I am currently working with converted perfectly to an Adobe PDF when I was still using Acrobat X Pro.

    Hi,
    Can you please share your test file because the issue you mention here seems to be file specific?

  • Problem with 'Word edit cell.vi' , Inputs transduced with the value of every row repeated

    Hello,
    Im using LV2013 with office 2013 report tool kit. I am trying to use Word edit cell to input values in table previously created in template .doc.
    Indeed, i trying the example Generate report from template and didnt works well. I search for solution and I see it was a problem with previous version but it seems not solve totally in this version for word office 2010. 
    http://digital.ni.com/public.nsf/allkb/4041ECB5D02BA57D862579A00002FE8D
    I checked this thread but i didnt get it to works. http://forums.ni.com/t5/LabVIEW/Problem-with-append-table-and-Word-2010/m-p/2190960#M702610
    Any way to solve it?.
    Thanks for help.
    Fred
    Attachments:
    error.png ‏32 KB
    Untitled 1.vi ‏19 KB
    exampleTemplate.doc ‏37 KB

    Hello, I solve it adding this to Word_insert_Table.
    http://forums.ni.com/t5/LabVIEW/Report-Generation-MS-Word-Table-Bug/td-p/1605170
    Thanks.
    Open [LabVIEW installation folder]\vi.lib\addons\_office\_wordsub.llb\Word_Insert_Table.vi
    There is a nested for loop that interprets the provided string array data and reformats it into a long ASCII string for the copy buffer. It should look like this:
    Change the nested loop to look like this:
    The changes I've made are twofold:
    1. Within the inner loop, replace the "\n" char with a Tab character
    2. Just after the inner loop, add a new "concatenate strings" function that adds "\n".

  • Problems with word files in pages

    I have been able to open word documents in Pages on my MacBook Pro since I got iWork '09 last year. However, I have just purchased an 27in iMac, and I can no longer open word documents using Pages. Anybody have a similar experience, and if so, what's the solution?

    Welcome to Apple Discussions
    Two things that may not have been done. It is amazing the number of problems these two steps can fix.
    First, use the Mac OS 10.6.3 combo updater. This fixes a problem with the Hoefler Text font that is not fixed using the delta update (10.6.1 > 10.6.2).
    Second, make sure your iWork applications are updated. For iWork '09 it's Pages 4.0.3 & Numbers 2.0.3. If you're not running the latest versions & Software Update says your software is up to date, make sure the applications are where the installer initially put them. The updaters are very picky. If the location is not where the updater is programmed to look or if the folder doesn't have the name the updater looks for, it will not work. The applications cannot be renamed or moved. They must be in the iWork '09 folder in Applications. That iWork folder must be named iWork '09. If it doesn't have the '09 Software Update won't find them & the updaters won't work.

  • Problem converting word 2010 Document

    I am having a problem converting a Word 2010 document using Live
    Cycle Designer ES2. I get the following
    error msg:
    Word (version XP onwards) could not be found
    Word 2010 is installed.

    I have just run into this issue myself.  At first I thought it might be that LiveCycle is not yet fully compatible with Office 2010 but after doing some googling it seems there are plenty of folks out there successfully converting Word 2010 documents to PDF.
    As a temporary workaround, you could try a copy of an earlier version of Word should one be available to you.
    If I'm able to find a solution to the issue, I'll let you know promptly.
    Josh Boyle
    [email protected]
    Cardinal Solutions Group

Maybe you are looking for